Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystal morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nucleation and Growth of Blue Phase 3D Cubic Structure Under Continuously Changing Curved Boundary Conditions

The blue phase of liquid crystals (BPLCs) with a cubic lattice of disclination lines and 3D nanostructure enables the modulation of photonic bandgap thus casting them in the category of photonic crystals. Its unique nature promises applications in display technologies, electro‐optics, and sensors. To integrate these ordered materials into wearable devices a fundamental understanding of curvature, and spatial confinement is necessary. Although continuous confinement in flat geometries have been studied, confining curvature has shown to induce strong destabilization effects on the cubic structure and formation of topological defects, thereby deteriorating their optical performance. Moreover, limitations in controlling the curvature of droplets further hinder studies of nucleation and growth of BPLCs. Here, to address these challenges, micro‐scale patterned surfaces of concentric cylinders are exploited to systematically control curvatures. The impact of curvature on the confined BPLCs is revealed in terms of phase transition temperature, nucleation and growth, morphology, as well as phase transformation. This research offers valuable insights into the stability, and structural characteristics of BPLCs in adaptive photonic devices, paving the way for future advancements in flexible displays, sensors, and other technologies leveraging liquid crystal (LC) materials.

3D Cubic Structure↗
DOE OSTI2024

Single Crystalline GeSe Van Der Waals Ribbons With Uniform Layer Stacking, High Carrier Mobility, and Adjustable Edge Morphology

Abstract Performance of the group IV monochalcogenide GeSe in solar cells, electronic, and optoelectronic devices is expected to improve when high‐quality single crystalline material is used rather than polycrystalline films. Crystalline flakes represent an attractive alternative to bulk single crystals as their synthesis may be developed to be scalable, faster, and with higher overall yield. However, large – and especially large and thin – single crystal flakes are notoriously hard to synthesize. Here it is demonstrated that vapor‐liquid‐solid growth combined with direct lateral vapor‐solid incorporation produces high‐quality single crystalline GeSe ribbons with tens of micrometers size and controllable thickness. Electron microscopy shows that the ribbons exhibit perfect equilibrium (AB) van der Waals stacking order without extended defects across the entire thickness, in contrast to the conventional case of substrate‐supported flakes where material is added via layer‐by‐layer nucleation and growth on the basal plane. Electrical measurements show anisotropic transport and a high Hall mobility of 85 cm 2 V −1 s −1 , on par with the best single crystals to date. Growth from mixed GeSe and SnSe vapors, finally, yields ribbons with unchanged structure and composition but with jagged edges, promising for applications that rely on ample chemically active edge sites, such as catalysis or photocatalysis.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Underlying limitations behind impedance rise and capacity fade of single crystalline Ni-rich cathodes synthesized via a molten-salt route

Layered oxide LiNi x Mn y Co z O 2 (NMC) cathodes are often synthesized as polycrystalline secondary particles. Due to intergranular fracture stemming from volume changes of randomly oriented primary particles during charge/discharge, the synthesis of larger single-crystalline cathodes is of high interest. In this work, molten salt assisted growth of micron-sized Ni-rich crystals is achieved with excellent crystallinity, low cation mixing, and negligible impurities. However, electrochemical performance is compromised by high surface reactivity resulting in decomposition of electrolyte and subsequent formation of a thick CEI layer. While intergranular fracture is eliminated, planar gliding and severe intragranular fracture along the (003) plane occurs in the high voltage region within the first few cycles and is associated primarily with H2 to H3 structural transitions. In addition, H2 to H3 transitions are highly irreversible with cyclic voltammograms revealing polarization growth within <5 cycles. Subsequently, the single-crystalline material exhibited markedly reduced available capacity and enhanced capacity fade from sharp impedance growth compared to its polycrystalline counterpart. Here, this work furthers a fundamental understanding into the limitations of single-crystalline Ni-rich cathodes, and the obstacles limiting the advantages offered by the single-crystalline morphology.

25 ENERGY STORAGE↗
DOE OSTI2024

Giant Apparent Optical Circular Dichroism in Thin Films of Bismuth-Based Hybrid Organic-Inorganic Metal Halide Semiconductor Through Preferred Orientation

Introducing chirality into organic/inorganic hybrid materials can impart chiroptical properties such as circular dichroism. The ability to tune chiroptical properties in self-assembled materials can have important implications for spintronic and optoelectronic applications. Here, a chiral organic cation, (R/S)-4-methoxy-a-methylbenzylammonium, is incorporated to synthesize the bismuth-based hybrid organic-inorganic metal halide semiconductor, (R/S-MeOMePMA)BiI4. Thin films of this Bi-based compound demonstrate large chiroptical responses, with circular dichroism anisotropy (gCD) values up to ˜0.1, close to the highest value observed in another chiral metal-halide semiconductor, (R-MBA2CuCl4). Detailed investigation reveals that this large gCD in (R/S-MeOMePMA)BiI4 is caused by the apparent CD effect. Careful selection of deposition conditions and the concomitant thin-film orientation enables the control of gCD, with maximum value observed when its thin film has a well-crystallized preferred (001) orientation parallel to the substrate. The results support a growing body of evidence that low symmetry plays an important role in achieving unusually large gCD in these chiral metal-halide materials and provides design rules for achieving large chiroptical response via morphology control.

chiroptic response↗
DOE OSTI2022

Revisiting the capacity-fading mechanism of P2-type sodium layered oxide cathode materials during high-voltage cycling

We report P2-type sodium layered oxide cathode (Na 2/3 Ni 1/3 Mn 2/3 O 2 , P2-NNMO) has attracted great attention as a promising cathode material for sodium ion batteries because of its high specific capacity. However, this material suffers from a rapid capacity fade during high-voltage cycling. Several mechanisms have been proposed to explain the capacity fade, including intragranular fracture caused by the P2-O2 phase transion, surface structural change, and irreversible lattice oxygen release. Here we systematically investigated the morphological, structural, and chemical changes of P2-NNMO during high-voltage cycling using a variety of characterization techniques. It was found that the lattice distortion and crystal-plane buckling induced by the P2-O2 phase transition slowed down the Na-ion transport in the bulk and hindered the extraction of the Na ions. The sluggish kinetics was the main reason in reducing the accessible capacity while other interfacial degradation mechanisms played minor roles. Our results not only enabled a more complete understanding of the capacity-fading mechanism of P2-NNMO but also revealed the underlying correlations between lattice doping and the moderately improved cycle performance.

25 ENERGY STORAGE↗
DOE OSTI2024

Determination of Vibrational Motions Driving Photoinduced Electron Transfer Reactions in Molecular Crystals and Organic Thin Films

The objective of this research is to develop an understanding of how nuclear motions can be used to drive and control photo-induced charge transfer and singlet fission reactions in molecular crystals and thin films. By following the structural evolution of reacting molecules and nanostructures on the timescale of their nuclear motion, we will determine what interplay of nuclear coordinates is most efficient in driving electron transfers, a necessary first step in most photovoltaic and photocatalytic processes. We will identify which nuclear coordinates effectively promote desirable electron transfer processes, or ineffectively dissipate photon energy into unwanted thermal energy, thus guiding the design and implementation of molecular systems tailored for high efficiency processes. Specifically, we aim to identify which nuclear coordinates are responsible for driving electron transfer and singlet fission reactions at different points along the reaction coordinate, particularly in regimes which deviate from Marcus theory predictions. We will do so by investigating systems with electron transfer and singlet fission occurring from non-thermalized states due to strong donor-acceptor electronic coupling. First, we will prove that specific vibrational modes are responsible for charge transfer processes in molecular crystals. Secondly, we will investigate how vibrational coherences and specific nuclear motions can be used to drive high yield singlet fission processes. Finally, we will determine how complex film morphology affects long-range charge transport, a key limiting factor in our ability to make gains in efficiency.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2019

Experimental Investigation of Cement Hydration in Gravity-Free Environment

In this work, cement hydration in terrestrial and microgravity environment was compared. This was for the first time, when the International Space Station was utilized to fully investigate the complex process of cement solidification. Microstructural development of hydrating cement occurs in stages during the hydration reaction and hardening process, which results in elaborate combinations of amorphous and crystalline phases. The morphology, volume fraction, and distribution of these phases ultimately determine the hardened cement’s material properties. Minimizing gravity-driven phenomena, such as thermosolutal convective flow and sedimentation ensures crystal growth strictly by diffusion and a microstructure forms differently from that observed in typical laboratory conditions on Earth. A test matrix was developed that includes samples with various w/c ratio and various compositions; incorporating alite, pure water and cement system, cement with chemical admixtures, as well as commercial products. This paper reports on main changes initially observed in the microstructural development of hydrated pure compound of tricalcium silicate (C3S).

Neves, Juliana↗
DOE OSTI2022

Two Neptunium(III) Mellitate Coordination Polymers: Completing the Series Np–Cf of Trans-Uranic An(III) Mellitates

For this work, two neptunium(III) mellitates, 237 Np 2 (mell)(H 2 O) 9 ·1.5H 2 O (Np-1α) and 237 Np 2 (mell)(H 2 O) 8 ·2H 2 O (Np-1β), have been synthesized from 237 NpCl 4 (dme) 2 by reduction with KC 8 and subsequent reaction with an aqueous solution of mellitic acid (H 6 mell). Characterization by single-crystal X-ray crystallography and UV–vis–NIR spectroscopy confirms that the neptunium is in its +3 oxidation state and both polymorphs are isostructural to the previously reported plutonium mellitates. Of the two morphologies, Np-1α is indefinitely stable in air, while Np-1β slowly oxidizes over several months. This is due to the change in the energy of the metal-ligand charge-transfer absorption exhibited by these compounds attributed to differing numbers of carboxylate bonds to Np(III), where in Np-1β the energy is low enough to result in spontaneous oxidation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2001

KT Boundary Impact Debris from DSDP Site 577

The KT boundary at DSDP Site 577 (Shatsky Rise, western North Pacific) is in a calcareous nannofossil ooze. It is bioturbated so Ir and impact debris are smeared across less than 15 cm of core. An absence of sulfides and chalcophile enrichment and the presence of Mn-micronodules indicate that this boundary did not experience anoxic conditions typical of many other calcareous KT sites. Because of its shallow burial (109 m) ejecta is extremely well preserved and has been the subject of numerous studies. Three high-temperature minerals have been identified at this site. Clinopyroxene (cpx), found only at Site 577 may be precursor to diagenetic sanidine in some European sites. Magnesioferrite spinel has the highest Fe2O3/FeO of any locality and can have and trace inclusions of Ni-magnesiowustite, which is known at only one other site (Site 596). Other debris described includes shocked quartz grains less than 200 microns, hollow spherules possibly related to impact melt glasses found near Chicxulub, and irregular Ir-rich particles that may be derived directly from meteoritic materials. The latter may be related to the fossil meteorite found at Site 576, just 500 km to the east. A large-volume (approx. 10 cc) sample was taken to systematically characterize debris. The less than 60 microns fraction of the carbonate-free sediment contained 44 mg of impact debris. 2700 particles less than l00 microns were classified based on color, shape, and morphology. About 55% are generally light colored, composed mostly of clays, and typically lack magnesioferrite spinel. Less than half of these are quite spherical; many have irregular shapes, possibly from fragmentation. Hollow spherules with smooth shiny surfaces are only 2% of the total but many fragments in the 60 - 100 microns fraction suggest that they were more abundant and that some may have been quite large; 800 microns or more. Cpx-bearing spherules, easily identified by green crystals at the surface, constitute only 2.5% of the total. Three cpx spherules are dumbbells. The other 40% of the debris is a complex assemblage of dark-colored particles, most of which have magnesioferrite spinel. We have currently separated these into 6 groups based on color and morphology, but this hardly describes the diversity of this group. They range from smooth and spherical to rough and irregular in shape. Some have a planar cleavage, similar to some broken cosmic spherules. 220 particles were irradiated for trace element analysis, as groups and as individual particles. It appears that every spherule type as at least a few ng/g Ir. Several of the spinel-bearing particles have been identified with high Ir (200-1500 ng/g), Cr (2-5 mg/g), and Ni (2-10 mg/g), consistent with results. It is hoped that some of these will yield potential fragments of the KT bolide. Only five have been sectioned to date and they are characterized by high concentrations of spinel; two contained traces of magnesiowustite. This debris constitutes a complex assemblage of ejecta materials. The light-colored, spinel-free particles likely derive mainly from target materials. A significant fraction of these are probably alteration products of cpx-spherules. The dark-colored debris is more likely to have high siderophile concentrations, and thus a high extraterrestrial component. However, the majority don't. Most of the larger spinel-bearing spherules have modest Ir concentrations (5-30 ng/g).

Kyte, Frank T.↗
DOE OSTI2024

3D Temperature-Controlled Interchangeable Pattern for Size-Selective Nanoparticle Capture

Patterned surfaces with distinct regularity and structured arrangements have attracted great interest due to their extensive promising applications. Although colloidal patterning has conventionally been used to create such surfaces, herein, we introduce a novel 3D patterned poly(N-isopropylacrylamide) (PNIPAM) surface, synthesized by using a combination of colloidal templating and surface-initiated photoinduced electron transfer-reversible addition–fragmentation chain transfer (SI-PET-RAFT) polymerization. In order to investigate the temperature-driven 3D morphological variations at a lower critical solution temperature (LCST) of ~32 °C, multifaceted characterization techniques were employed. Atomic force microscopy confirmed the morphological transformations at 20 and 40 °C, while water contact angle measurements, upon heating, revealed distinct trends, offering insights into the correlation between surface wettability and topography adaptations. Moreover, quartz crystal microbalance with dissipation monitoring and electrochemical measurements were employed to detect the topographical adjustments of the unique hollow capsule structure within the LCST. Tests using different sizes of PSNPs shed light on the size-selective capture–release potential of the patterned PNIPAM, accentuating its biomimetic open–close behavior. Notably, our approach negates the necessity for expensive proteins, harnessing temperature adjustments to facilitate the noninvasive and efficient reversible capture and release of nanostructures. Finally, this advancement hopes to pave the way for future innovative cellular analysis platforms.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Convection-induced distortion of a solid-liquid interface

Measurements of convective flow fields and solid-liquid interface shapes during the solidification of a pure and a slightly alloyed transparent material reveal that the convective transport of solute can cause a macroscopic depression to develop in the solid-liquid interface. This effect occurs under conditions close to those which are predicted to produce morphological instability of a planar interface. A cellular or dendritic microstructure later develops within the interface depression. The convection is attributed to the effect of radial temperature gradients in the crystal growth apparatus.

Schaefer, R. J.↗
DOE OSTI2024

Eliminating the Burn‐in Loss of Efficiency in Organic Solar Cells by Applying Dimer Acceptors as Supramolecular Stabilizers

Abstract The meta‐stable active layer morphology of organic solar cells (OSCs) is identified as the main cause of the rapid burn‐in loss of power conversion efficiency (PCE) during long‐term device operation. However, effective strategies to eliminate the associated loss mechanisms from the initial stage of device operation are still lacking, especially for high‐efficiency material systems. Herein, the introduction of molecularly engineered dimer acceptors with adjustable thermal transition properties into the active layer of OSCs to serve as supramolecular stabilizers for regulating the thermal transitions and optimizing the crystallization of the absorber composites is reported. By establishing intimate π‐π interactions with small‐molecule acceptors, these stabilizers can effectively reduce the trap‐state density (N t ) in the devices to achieve excellent PCEs over 19%. More importantly, the lowN t associated with an initially optimized morphology can be maintained under external stresses to significantly reduce the PCE burn‐in loss in devices. This research reveals a judicious approach to improving OPV stability by establishing a comprehensive correlation between material properties, active‐layer morphology, and device performance, for developing burn‐in‐free OSCs.

Chemistry↗
NASA NTRS2001

Potential Evaporite Biomarkers from the Dead Sea

The Dead Sea is located on the northern branch of the African-Levant Rift systems. The rift system, according to one model, was formed by a series of strike slip faults, initially forming approximately two million years ago. The Dead Sea is an evaporite basin that receives freshwater from springs and from the Jordan River. The Dead Sea is different from other evaporite basins, such as the Great Salt Lake, in that it possesses high concentrations of magnesium and has an average pH of 6.1. The dominant cation in the Great Salt Lake is sodium, and the pH is 7.7. Calcium concentrations are also higher in the Dead Sea than in the Great Salt Lake. Both basins are similar in that the dominant anion is chlorine and the salinity levels are approximately 20 %. Other common cations that have been identified from the waters of the Dead Sea and the Great Salt Lake include sodium and potassium. A variety of Archea, Bacteria, and a single genus of a green algal, Dunaliella, has been described from the Dead Sea. Earlier studies concentrated on microbial identification and analysis of their unique physiology that allows them to survive in this type of extreme environment. Potential microbial fossilization processes, microbial fossils, and the metallic ions associated with fossilization have not been studied thoroughly. The present study is restricted to identifying probable microbial morphologies and associated metallic ions. XRD (X Ray Diffraction) analysis indicates the presence of halite, quartz, and orthoclase feldspar. In addition to these minerals, other workers have reported potassium chloride, magnesium bromide, magnesium chloride, calcium chloride, and calcium sulfate. Halite, calcium sulfate, and orthoclase were examined in this report for the presence of microbes, microbially induced deposits or microbial alteration. Neither the gypsum nor the orthoclase surfaces possesses any obvious indications of microbial life or fossilization. The sand-sized orthoclase particles are weathered with 122 extensive fan-shaped mineral deposits. The gypsum deposits are associated with halite minerals and also exhibit extensive weathering. Halite minerals represent the only substrates that have probable rod-shaped microbial structures with long, filamentous, apical extensions. EDS (energy dispersive x-ray) analysis of the putative microbes indicates elevated calcium levels that are enriched with magnesium. The rod-shaped structures exhibit possible fossilization stages. Rhombohedralshaped minerals of magnesium-enriched calcium carbonate are deposited on the microbial surfaces, and eventually coat the entire microbial surface. The sodium chloride continues to crystallize on nearby halite surface and even crystallizes on the fossilized microbial remains. The putative fossils are found exclusively on halite surfaces, and all contained elevated levels of calcium magnesium cations. Both of these metallic cations are associated with microbial activity and fossilization. Their morphological diversity is low in comparison with the reported living Dead Sea microbial population. If we examine the fossil record for multicellular organisms, fossilization rates are lower for soft-bodied organisms than for those possessing hard parts, i.e. shells, bones. For example, smaller, single celled organisms would have a smaller chance of fossilization; their fossilized shapes could be mistaken for abiotic products. Another consideration is that dead organisms in the water column are probably utilized as a food source by other microbes before fossilization processes are completed. This may be an important consideration as we attempt to model and interpret ancient microbial environments either on Earth or on Mars.

Morris, Penny A.↗
DOE OSTI2025

Interface Nucleus Templating of Modular Intermetallic Morphologies: Chemical Pressure Complementarity, Columnar Domains, and Complex Disorder in Y 13 Ag 42.7 Zn 29.7

One element of the diversity of intermetallic phases is the formation of complex structures from the assembly of fragments of simpler structures. Recently, we devised the Interface Nuclear Approach as a model for understanding such modular arrangements, in which the intergrowth of different structures is driven by chemical pressure (CP) relief at shared motifs at the domain interfaces, referred to as interface nuclei. In this Article, we present the synthesis, crystal structure, and CP analysis of a new compound that expands on this theme, Y 13 Ag 42.7 Zn 29.7 . Its hexagonal structure contains interpenetrating domains based on the CaPd 5+x and EuMg 5 types. The CaPd 5+x -based regions are reminiscent of the lamellar intergrowth structures previously observed in the Y−Ag−Zn system. In Y 13 Ag 42.7 Zn 29.7 , however, the domains have a different morphology, forming columns that adopt a hexagonal rod-packing. The geometrical features of the remaining spaces are assigned, using the program GrowDomain, to the cores of trigonal units of the EuMg 5 type, while layers of disordered atoms occur at heights along z where the parent structures are mismatched. At the CaPd 5+x -type/EuMg 5 -type interfaces, simple interface nucleus motifs with strong CP-complementarity can be identified, while their distribution within the parent structures supports the notion of templated architectures in modular intermetallics.

Chemical structure↗
DOE OSTI2024

Electrochemical Synthesis of Zeolite Coatings with Controlled Crystal Polymorphism and Self-Regulating Growth

Zeolite coatings are studied as molecular sieves for membrane separation, membrane reactors, and chemical sensor applications. They are also studied as anticorrosive films for metals and alloys, antimicrobial and hydrophobic films for heating, ventilation, and air conditioning, and dielectrics for semiconductor applications. Zeolite coatings are synthesized by hydrothermal, ionothermal, and dry-gel conversion approaches, which require high process temperatures and lengthy times (ranging from hours to days). Here, we report the first zeolite coatings synthesized via electrochemical deposition on a cathodic electrode, with controlled crystal polymorphism achieved within subhourly duration. We demonstrate this approach by developing sodium zeolite (e.g., sodalite (SOD), NaA (LTA), and Linde Type N (LTN)) coatings on a titanium electrode and extending the synthesis method to porous stainless steel. The coating morphology and crystallinity depend on the temperature, time, and applied current. The coating thickness is independent of the applied current, showing the presence of a self-regulating mechanism to ensure a uniform coating thickness across the metal surface. The electrochemical zeolite growth mechanism was elucidated with high-resolution transmission electron microscopy, and applications of the resultant zeolite coatings for oil/water separation and ethanol/water pervaporation were exploited. Electrochemical synthesis represents a novel, simple, fast, and environmentally friendly approach to preparing zeolite coatings. It can potentially be generalized for developing zeolite materials with diverse framework structures, morphologies, and orientations for substrates with complicated geometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ionic Thermoelectric Generators in Vertical and Planar Topologies Based on Fluorinated Polymer Hybrid Materials with Ionic Liquids

Abstract Ionic thermoelectrics (TEs), in which voltage generation is based on ion migration, are suitable for applications based on their low cost, high flexibility, high ionic conductivity, and wide range of Seebeck coefficients. This work reports on the development of ionic TE materials based on the poly(vinylidene fluoride‐trifluoroethylene), Poly(VDF‐co‐TrFE), as host polymer blended with different contents of the ionic liquid, IL, 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI]. The morphology, physico‐chemical, thermal, mechanical, and electrical properties of the samples are evaluated together with the TE response. It is demonstrated that the IL acts as a nucleating agent for polymer crystallization. The mechanical properties and ionic conductivity values are dependent on the IL content. A high room temperature ionic conductivity of 0.008 S cm −1 is obtained for the sample with 60 wt% of [EMIM][TFSI] IL. The TE properties depend on both IL content and device topology‐vertical or planar‐the largest generated voltage range being obtained for the planar topology and the sample with 10 wt% of IL content, characterized by a Seebeck coefficient of 1.2 mV K −1 . Based on the obtained maximum power density of 4.9 µW m −2 , these materials are suitable for a new generation of TE devices.

Pereira, Nelson↗
DOE OSTI2025

Twin nucleation and growth in hexagonal close-packed metals: The role of slip-mediated plasticity on twin embryo formation and evolution

Twinning is a key deformation mechanism in hexagonal close-packed (hcp) metals, which are typified by a lack of easily activated slip systems that can accommodate a general state of loading. Pragmatically, the nucleation and evolution of twin domains occurs concomitantly with slip, such that the eventual twin network is conditioned by both external and internal stresses resulting, among others, from the evolution of dislocations. However our understanding of the interplay between dislocations, and twin nucleation and stability remains limited. This work focuses on elucidating the influence of dislocation-mediated plasticity on the formation, growth, and stability of twin embryos. First, a new mesoscale spectral crystal plasticity-twinning framework is developed and used to quantify the change in the free energy landscape following the nucleation {$10\bar{1}2$} of twins in Mg. Representative twin morphologies are modeled under conditions of limited and profuse slip activity, which are emulative of small- and bulk-scale samples, respectively. Then, the driving traction profiles around twin embryos are investigated via a sharp interface approach to obtain insights into how concurrent slip-mediated plasticity can influence the growth/stabilization of nanometric twins. The driving traction profiles are further utilized to determine the stability of twin embryos post loading. The initial dislocation density in the samples, and within the different domains (i.e., twin vs. parent), is seen to have a significant effect on the twin nucleation stress. Namely, the activation of high levels of concomitant plasticity in the parent grain is seen to significantly drive the formation of nanometric twin nuclei at stresses as low as 250 MPa. Further, the sharp interface analysis reveals that profuse plasticity in the parent grain simultaneously alters the forward and back stresses, such that the magnitude/polarity of the driving tractions become increasingly favorable for nanometric twin growth when slip is active. Finally, prior plasticity in the parent grain is seen to result in favorable driving tractions for nanometric twin growth, even at applied stresses as low as ~ 100 MPa. In conclusion, these results are in stark contrast to a case without any dislocations, wherein applied stresses as high as ~ 500 MPa are necessary to grow the twin domains.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Orientation matters: Measuring the correct surface of polyamide membranes with quartz crystal microbalance

The surface of polyamide reverse osmosis (RO) membranes which regulates interface-dominated phenomena, such as partitioning and fouling, is the one facing the feed during operation. However, the opposite surface of the polyamide selective layer, the one facing the permeate and in contact with the polysulfone porous support, is commonly analyzed in quartz crystal microbalance (QCM) measurements due to limitations of state-of-the-art transfer methodologies. Such measurements on the back surface cannot be generalized because the polyamide layer is chemically and morphologically asymmetric. Herein, we introduce a simple method to coat QCM sensors with polyamide active layers in the correct orientation (i.e., exposing their front surface) and show that interface-dominated phenomena differ significantly between orientations. We start by describing a transfer protocol to coat any surface with a polyamide layer on its front surface orientation. We then systematically analyze the chemical and morphological differences between the two surfaces of the polyamide layer of a commercial RO membrane. Finally, we demonstrate that interface-dominated phenomena depend on the orientation by showing that NaCl partitioning at pH 6 was 1.3 to 2.3-fold higher on the front surface and that organic fouling with humic acid occurred at a lower rate on this surface. The new method presented herein enables measurements on the front surface of polyamide RO membranes, which should be the standard in any future QCM studies.

Fouling behavior↗