Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalytic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An N$\cdots$H$\cdots$N low-barrier hydrogen bond preorganizes the catalytic site of aspartate aminotransferase to facilitate the second half-reaction

Pyridoxal 5'-phosphate (PLP)-dependent enzymes have been extensively studied for their ability to fine-tune PLP cofactor electronics to promote a wide array of chemistries. Neutron crystallography offers a straightforward approach to studying the electronic states of PLP and the electrostatics of enzyme active sites, responsible for the reaction specificities, by enabling direct visualization of hydrogen atom positions. Here we report a room-temperature joint X-ray/neutron structure of aspartate aminotransferase (AAT) with pyridoxamine 5'-phosphate (PMP), the cofactor product of the first half reaction catalyzed by the enzyme. Between PMP N SB and catalytic Lys258 Nζ amino groups an equally shared deuterium is observed in an apparent low-barrier hydrogen bond (LBHB). Density functional theory calculations were performed to provide further evidence of this LBHB interaction. The structural arrangement and the juxtaposition of PMP and Lys258, facilitated by the LBHB, suggests active site preorganization for the incoming ketoacid substrate that initiates the second half-reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Homogeneous versus MOF-supported catalysis: a direct comparison of catalytic hydroboration with Ni tripodal P 3 E (E = Si, Ge) complexes

The MOF material NU-1000 was employed to host Ni tripodal complexes prepared from new organometallic precursors [HNi(κ 4 (E,P,P,P)-E(o-C 6 H 4 CH 2 PPh 2 ) 3 ], E = Si (Ni-1), Ge (Ni-2). The new heterogeneous catalytic materials, Ni-1@NU-1000 and Ni-2@NU-1000, show the advantages of both homogeneous and heterogeneous catalysts. Finally, they catalyze the hydroboration of aldehydes and ketones more efficiently than the homogeneous Ni-1 and Ni-2, under aerobic conditions and show recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Coordination of copper within a crystalline carbon nitride and its catalytic reduction of CO 2

Inherently disordered structures of carbon nitrides have hindered an atomic level tunability and understanding of their catalytic reactivity. Starting from a crystalline carbon nitride, poly(triazine imide) or PTI/LiCl, the coordination of copper cations to its intralayer N-triazine groups was investigated using molten salt reactions. The reaction of PTI/LiCl within CuCl or eutectic KCl/CuCl 2 molten salt mixtures at 280 to 450 °C could be used to yield three partially disordered and ordered structures, wherein the Cu cations are found to coordinate within the intralayer cavities. Local structural differences and the copper content, i.e., whether full or partial occupancy of the intralayer cavity occurs, were found to be dependent on the reaction temperature and Cu-containing salt. Crystallites of Cu-coordinated PTI were also found to electrophoretically deposit from aqueous particle suspensions onto either graphite or FTO electrodes. As a result, electrocatalytic current densities for the reduction of CO 2 and H 2 O reached as high as ∼10 to 50 mA cm −2 , and remained stable for >2 days. Selectivity for the reduction of CO 2 to CO vs. H 2 increases for thinner crystals as well as for when two Cu cations coordinate within the intralayer cavities of PTI. Mechanistic calculations have also revealed the electrocatalytic activity for CO 2 reduction requires a smaller thermodynamic driving force with two neighboring Cu atoms per cavity as compared to a single Cu atom. These results thus establish a useful synthetic pathway to metal-coordination in a crystalline carbon nitride and show great potential for mediating stable CO 2 reduction at sizable current densities.

Chemistry↗
DOE OSTI2025

Unveiling the support effect in Pt-based catalysts for the selective catalytic oxidation of NH 3 under realistic diesel engine conditions

Pt catalysts have been widely used for the selective catalytic oxidation of NH 3 (NH 3 -SCO) in practical applications due to their high activity at low temperatures. However, more stringent regulations require further enhancement of low-temperature NH 3 -SCO activity. In this study, we investigated the influence of different supports, including aluminum oxide (Al 2 O 3 ), silica (SiO 2 ), and chabazite (CHA), on the NH 3 -SCO performance of Pt catalysts. Furthermore, our findings demonstrate that the Pt/CHA catalyst exhibited superior NH 3 -SCO performance under realistic diesel engine conditions, characterized by high space velocity and the presence of water vapor. Notably, the Pt/CHA catalyst achieved a significantly lower T 50 (temperature at which 50% NH 3 conversion is achieved) of 218 °C under conditions with both CO 2 and H 2 O, with a 56 °C reduction compared to the state-of-the-art Pt/Al 2 O 3 catalyst. The exceptional NH 3 -SCO performance is attributed to the high abundance of metallic Pt 0 species and the presence of rich and stable acid sites that facilitate NH 3 adsorption and activation. Furthermore, these results highlight CHA as a promising support for the Pt catalyst in NH 3 -SCO applications for diesel engine emission control.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Accelerating catalytic advancements through the precision of high-throughput experiments & calculations

The growing demand for energy-efficient processes to support a sustainable future drives the need for research to rapidly explore chemical and material space through accelerated catalyst discovery initiatives. Recent breakthroughs in high-throughput experimental and computational methods are transforming the catalysis field, surpassing traditional approaches to manipulating variables in catalytic processes. Key advancements in innovation include the integration of machine learning for efficient catalyst screening, high-throughput experimentation, data-driven methodologies employing comprehensive databases, and in situ and in operando techniques for realistic observations. This progress has undoubtedly been intertwined with a collaborative framework across disciplines, reshaping catalyst discovery methods in both industry and academia. This Opinion article presents a multifaceted perspective from coauthors with expertise spanning various stages of the Technology Readiness Level spectrum, highlighting both opportunities and persistent challenges in integrating computational and experimental approaches in catalysis. These challenges span from obtaining high-quality experimental data, scaling simulations to industrially relevant materials and process conditions to navigating the complexity and predictive accuracy of computational models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Integrating catalytic fractionation and microbial funneling to produce 2-pyrone-4,6-dicarboxylic acid and ethanol

Replacing biorefinery designs that use stepwise fractionation, depolymerization, and conversion processes with designed tandem process steps can greatly reduce a biorefinery's operating costs and environmental impact. Reductive Catalytic Fractionation (RCF) is a highly efficient lignin-first approach that combines biomass fractionation and lignin depolymerization to generate a hydrogenolysis oil and pulp. The oil is composed of a complex mixture of phenolic monomers, dimers, and oligomers. Intergrating this chemical deconstruction process with microbial funneling of phenolics can simplify the product mixture and make high-value products. We applied RCF to poplar biomass in a biomass-to-bioproduct processing chain in which the phenolics were funneled to 2-pyrone-4,6-dicarboxylic acid (PDC) by an engineered strain of Novosphingobium aromaticivorans DSM12444. The pulp was enzymatically digested and the glucose and xylose was funneled to ethanol by an engineered strain of Saccharomyces cerevisiae GLBRCY945. By combining biomass fractionation and lignin depolymerization we removed a costly processing step that directly translated into a 29% reduction in the minimum selling price of PDC. This work combines experimentation with process modeling of an integrated biorefinery design to show how utilizing tandem process steps can significantly reduce operating expenses and environmental impact of upgrading lignocellulosic biomass to a portfolio of high value products.

Sener, Canan [Great Lakes Bioenergy Research Cente↗
DOE OSTI2026

Solvent selection for a biomass-to-bioproduct pipeline through integrated reductive catalytic fractionation and microbial funneling

The growing significance of lignin-first biorefineries, which focus on upgrading the aromatics resulting from lignin depolymerization, presents opportunities for bioproduct synthesis using microbial strains capable of funneling a diverse array of phenolics into a single commodity chemical. In this study, we evaluated a biomass-to-bioproduct pipeline involving the reductive catalytic fractionation (RCF) of poplar biomass followed by biological funneling with a Novosphingobium aromaticivorans strain that produces 2-pyrone-4,6-dicarboxylic acid (PDC), a potential bioplastic precursor. Considering the impact of solvent on RCF reactor operating pressure, and the potential inhibitory effects of solvent on downstream microbial funneling, we performed an analysis of six pure solvents, namely methanol, ethanol, isopropanol, isobutanol, 1,4-dioxane and ethylene glycol, and different variations of their aqueous mixtures comprising 5 to 50 vol% water. For each pure solvent and solvent/water system, we measured phenolic monomer yields in the RCF process and PDC yields from the phenolic monomers. We then developed correlation models that relate phenolic monomer yields from RCF-derived samples to Hansen solubility parameters to determine solvent descriptors that contribute to high yields. Furthermore, we developed an integrated biorefinery system to estimate the minimum selling price (MSP) of PDC and the associated carbon footprint to identify solvent systems with better costs and sustainability metrics. These analyses resulted in the 50 vol% methanol/water system being identified as optimal because it reduces RCF reactor pressure and is compatible with microbial funneling with N. aromaticivorans. This solvent system produced 63 g PDC per kg biomass (264 g PDC per kg lignin) from 85 g phenolic monomers per kg biomass at a reduced reactor pressure of 48 bar (reduced by 26% compared to our previous poplar-to-PDC pipeline). The MSP for this system is $\$$13.98 per kg of purified PDC (carbon footprint of 1.47 kg CO 2 e per kg), which is about 24% lower than a previously described poplar-to-PDC pipeline and 46% lower than a lignin-to-PDC pipeline that used pure methanol as the solvent. The results from this study illustrate improvements that can be made in lignocellulosic biorefineries that are compatible with the hybrid chemical and biological processes needed to gain value from lignin.

Sripada, Sarada [Great Lakes Bioenergy Research Ce↗
DOE OSTI2025

Computational discovery of a novel double transition metal nitride MXene and its applications as an anchoring and catalytic material in Li–Se batteries

Double transition metal (DTM) nitride MXenes offer enhanced electrical conductivity and tunable catalytic properties compared to conventional carbide-based MXenes. In this study, we employed first-principles density functional theory (DFT) calculations to discover and computationally validate a novel DTM nitride MXene, Nb 2 TiN 2 , derived from its MAX phase precursor and investigated its potential as an anchoring material (AM) for Li–Se batteries. This newly proposed MXene expands the compositional landscape of DTM nitrides and opens new avenues for functional material design. We performed a comprehensive analysis of the thermodynamic and electronic properties of Nb 2 TiAlN 2 , and the MAX phase precursor to Nb 2 TiN 2 to assess its structural stability and exfoliation potential. Exfoliation energy calculations confirmed the feasibility of synthesizing Nb 2 TiN 2 from Nb 2 TiAlN 2 . We then explored the functionalized form, Nb 2 TiN 2 S 2 , evaluating its capability to serve as an effective anchoring material (AM) in Li–Se batteries by analyzing the reaction mechanisms and kinetics of the selenium reduction reaction (SeRR). Our results indicate that Nb 2 TiN 2 S 2 exhibits a strong binding affinity for lithium polyselenides (Li 2 Se n ), effectively suppressing the shuttle effect. Gibbs free energy calculations for the rate-limiting step of the SeRR reveal favorable kinetics and reduced reaction barriers. Overall, this study provides a detailed evaluation of the structural and electronic properties of a newly proposed DTM nitride MXene and its S-functionalized derivative and the catalyzing effect of Nb 2 TiN 2 S 2 in accelerating the reaction kinetics in Li–Se batteries. These findings underscore the potential importance of the further exploration of MXenes to address current challenges in high-performance Li–Se batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Catalytic Reactions by Heterobimetallic Carbonyl Complexes with Polar Metal–Metal Interactions

Abstract Heterobinuclear catalysts capable of bimetallic cooperative bond activation provide an alternative pathway to approach the discovery of novel and unique reactivity and selectivity in catalytic transformations, complementing more traditional mononuclear precious metal catalysts. This review summarizes recent advances in homogenous catalysis using heterobimetallic carbonyl catalysts with polar metal–metal interactions. 1 Introduction 2 Hydrogenation and Hydrofunctionalization 3 Carbonylation and Carboxylation 4 Oxidative Transformations 5 Conclusion and Outlook

Chemistry↗
DOE OSTI2020

Catalytic C 2 H 2 synthesis via low temperature CO hydrogenation on defect-rich 2D-MoS 2 and 2D-MoS 2 decorated with Mo clusters

Rational design of novel catalytic materials used to synthesize storable fuels via the CO hydrogenation reaction has recently received considerable attention. In this work, defect poor and defect rich 2D-MoS 2 as well as 2D-MoS 2 decorated with Mo clusters are employed as catalysts for the generation of acetylene (C 2 H 2 ) via the CO hydrogenation reaction. Temperature programmed desorption is used to study the interaction of CO and H2 molecules with the MoS 2 surface as well as the formation of reaction products. The experiments indicate the presence of four CO adsorption sites below room temperature and a competitive adsorption between the CO and H 2 molecules. The investigations show that CO hydrogenation is not possible on defect poor MoS 2 at low temperatures. However, on defect rich 2D-MoS 2 , small amounts of C 2 H 2 are produced, which desorb from the surface at temperatures between 170 K and 250 K. A similar C 2 H 2 signal is detected from defect poor 2D-MoS 2 decorated with Mo clusters, which indicates that low coordinated Mo atoms on 2D-MoS 2 are responsible for the formation of C 2 H 2 . Density functional theory investigations are performed to explore possible adsorption sites of CO and understand the formation mechanism of C 2 H 2 on MoS 2 and Mo 7 /MoS 2 . The theoretical investigation indicates a strong binding of C 2 H 2 on the Mo sites of MoS 2 preventing the direct desorption of C 2 H 2 at low temperatures as observed experimentally. Instead, the theoretical results suggest that the experimental data are consistent with a mechanism in which CHO radical dimers lead to the formation of C 2 H 2 that presents an exothermic desorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomistic mechanisms for catalytic transformations of NO to NH3, N2O, and N2 by Pd

The industrial pollutant NO is a potential threat to the environment and to human health. Thus, selective catalytic reduction of NO into harmless N2, NH3, and/or N2O gas is of great interest. Among many catalysts, metal Pd has been demonstrated to be most efficient for selectivity of reducing NO to N2. However, the reduction mechanism of NO on Pd, especially the route of N−N bond formation, remains unclear, impeding the development of new, improved catalysts. We report here the elementary reaction steps in the reaction pathway of reducing NO to NH3, N2O, and N2, based on density functional theory (DFT)-based quantum mechanics calculations. We show that the formation of N2O proceeds through an Eley-Rideal (E−R) reaction pathway that couples one adsorbed NO* with one non−adsorbed NO from the solvent or gas phase. This reaction requires high NO* surface coverage, leading first to the formation of the trans-(NO)2* intermediate with a low N−N coupling barrier (0.58 eV). Notably, trans-(NO)2* will continue to react with NO in the solvent to form N2O, that has not been reported. With the consumption of NO and the formation of N2O* in the solvent, the Langmuir-Hinshelwood (L-H) mechanism will dominate at this time, and N2O* will be reduced by hydrogenation at a low chemical barrier (0.42 eV) to form N2. In contrast, NH3 is completely formed by the L-H reaction, which has a higher chemical barrier (0.87 eV). Our predicted E-R reaction has not previously been reported, but it explains some existing experimental observations. In addition, we examine how catalyst activity might be improved by doping a single metal atom (M) at the NO* adsorption site to form M/Pd and show its influence on the barrier for forming the N−N bond to provide control over the product distribution.

Physics↗
DOE OSTI2020

Catalytically mediated epitaxy of 3D semiconductors on van der Waals substrates

The formation of well-controlled interfaces between materials of different structure and bonding is a key requirement when developing new devices and functionalities. Of particular importance are epitaxial or low defect density interfaces between two-dimensional materials and three-dimensional semiconductors or metals, where an interfacial structure influences electrical conductivity in field effect and optoelectronic devices, charge transfer for spintronics and catalysis, and proximity-induced superconductivity. Epitaxy and hence well-defined interfacial structure has been demonstrated for several metals on van der Waals-bonded substrates. Semiconductor epitaxy on such substrates has been harder to control, for example during chemical vapor deposition of Si and Ge on graphene. Here, we demonstrate a catalytically mediated het-eroepitaxy approach to achieve epitaxial growth of three-dimensional semiconductors such as Ge and Si on van der Waals-bonded materials such as graphene and hexagonal boron nitride. Epitaxy is "transferred" from the substrate to semiconductor nanocrystals via solid metal nano-crystals that readily align on the substrate and catalyze the formation of aligned nuclei of the semiconductor. In situ transmission electron microscopy allows us to elucidate the reaction pathway for this process and to show that solid metal nanocrystals can catalyze semiconductor growth at a significantly lower temperature than direct chemical vapor deposition or deposition mediated by liquid catalyst droplets. We discuss Ge and Si growth as a model system to explore the details of such hetero-interfacing and its applicability to a broader range of materials.

36 MATERIALS SCIENCE↗