Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atmospheric processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

The faint young sun problem

It is shown that the faint young sun problem was most likely solved by an increase in atmospheric CO2 concentration in the earth's atmosphere brought about by the CO2 geochemical cycle. Because the loss process for atmospheric CO2 requires liquid water, and because the earth is continually resupplying atmospheric CO2 by carbonate metamorphism, the surface temperature should never have fallen below the point at which the ocean would freeze. Indeed, the early earth may have been quite warm if carbonate metamorphism was faster and if the continents were originally smaller, so that silicate weathering was inhibited.

Kasting, James F.↗

Investigating the Impacts of Aqueous-Phase Processing on Organic Aerosol Chemical Climatology Using ARM and ASR Observations

This project improved understanding of how atmospheric aerosol particles form and evolve, with a focus on the role of water-driven (aqueous-phase) chemical reactions in the atmosphere. These processes occur in clouds, fog, and humid air and can significantly change the composition and properties of airborne particles, known as aerosols, which influence air quality and climate. By combining field measurements, laboratory experiments, and advanced analytical techniques, the project identified key chemical signatures that allow scientists to distinguish particles formed through aqueous processes from those formed in the gas phase. Observations from multiple environments, including wildfire smoke, urban regions, and cloud-influenced areas, show that aqueous chemistry is an important pathway for particle formation and aging. The project also developed new measurement approaches using uncrewed aerial systems (UAS) to capture how aerosol composition varies with altitude, providing critical insights into how particles interact with clouds. In addition, new data analysis frameworks were created to better interpret long-term aerosol measurements and improve characterization of particle sources and transformations. These results have been integrated into a global database of aerosol measurements and used to support atmospheric modeling efforts. Overall, the project provides important tools and knowledge to improve predictions of how aerosols affect climate and air quality, particularly through their interactions with radiation and clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Land surface hydrology parameterization for atmospheric general circulation models including subgrid scale spatial variability

Parameterizations are developed for the representation of subgrid hydrologic processes in atmospheric general circulation models. Reasonable a priori probability density functions of the spatial variability of soil moisture and of precipitation are introduced. These are used in conjunction with the deterministic equations describing basic soil moisture physics to derive expressions for the hydrologic processes that include subgrid scale variation in parameters. The major model sensitivities to soil type and to climatic forcing are explored.

Entekhabi, D.↗

A surface layer variance heat budget for ENSO

Abstract Characteristics of the El Niño–Southern Oscillation (ENSO), such as frequency, propagation, spatial extent, and amplitude, strongly depend on the climatological background state of the tropical Pacific. Multidecadal changes in the ocean mean state are hence likely to modulate ENSO properties. To better link background state variations with low‐frequency amplitude changes of ENSO, we develop a diagnostic framework that determines locally the contributions of different physical feedback terms on the ocean surface temperature variance. Our analysis shows that multidecadal changes of ENSO variance originate from the delicate balance between the background‐state‐dependent positive thermocline feedback and the atmospheric damping of sea surface temperatures anomalies. The role of higher‐order processes and atmospheric and oceanic nonlinearities is also discussed. The diagnostic tool developed here can be easily applied to other tropical ocean areas and climate phenomena.

Boucharel, Julien↗

Development and thermal performance verification of composite insulation boards containing foam-encapsulated vacuum insulation panels

High-performance thermal insulation is a critical need for buildings. This article presents the development and thermal characterization of composite foam insulation boards containing low-cost vacuum insulation cores. The composite foam-vacuum insulation boards were created in a semi-automatic operation in a foam insulation manufacturing plant. The low-cost vacuum insulation is a new technology called modified atmosphere insulation. The production process of modified atmosphere insulation is much simpler than traditional vacuum insulation manufacturing, and it has the potential for significant cost reduction at the same thermal performance. Prototypes of small- and full-scale composite insulation boards were created for testing and evaluation under laboratory and natural weatherization conditions. The laboratory tests showed that the overall thermal resistance of the composite insulation board is at least twice that of current rigid foam insulation used in building envelope. Lastly, ongoing test of the composite insulation in a natural exposure test facility indicates that the high thermal performance was retained through handling and installation as well as natural aging over a period of one and a half years.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Neural Differential Equation Formulation for Modeling Atmospheric Effects in Hyperspectral Images

Atmospheric correction is the process for removing atmospheric effects from spectral data; a necessary step for recovering salient spectral properties. The complex interactions between the atmosphere and light are dominated by absorbance and scattering physics. Existing methods for modeling atmospheric interactions typically rely on deep knowledge of relevant environmental conditions and high-fidelity numerical simulations of the governing physics in order to obtain accurate estimates of these effects. Additionally, existing approaches often require a subject matter expert for pre/post-processing of the data. Model-based approaches for removing atmospheric effects struggle in situations where such domain expertise is not available, and require significant human effort and computational power even when that expertise is available. In contrast, we propose a data-driven approach the uses Neural Differential Equations (NDEs) to accurately learn the interactions between electromagnetic radiation and the atmospheric without access to location specific environmental information. Once trained, the NDE can be applied bi-directionally; to apply or remove atmospheric effects. We demonstrate the effectiveness and utility of these techniques on an example multi-spectral scene.

Koch, James V.↗

Photoinitiated Reactions of Molecules and Radicals in Molecular Beams

The UV photochemistry of organic molecules is a fundamental process that governs reactions in the atmosphere, synthetic chemistry, processing of organic aerosols, and biological damage in living tissues. In many organic molecules, the ensuing evolution involves pathways that are in competition, giving rise to different products, isomerization, coupling to other electronic states, and secondary reactive collisions. Because photodissociation is usually fast (picoseconds to microseconds), these processes are far from equilibrium and are controlled by kinetic competition and dynamical forces. The work accomplished was focused primarily on the photochemistry of alpha-keto carboxylic acids, a group of acids produced from natural sources, which are implicated in aerosol formation and biological processes. In the atmosphere, they are destroyed mainly by solar radiation. Studying their photochemistry has been surprisingly difficult because of the complexity of their excited electronic states, and the effect of collisions and secondary reactions. The second project investigated the lifetime of excited electronic states of pyrazine and picoline and had both experimental and theoretical aspects. The work focused on a model molecule, pyruvic acid (PA), because it was hypothesized that it should be a good source of the unstable carbene, methylhydroxycarbene (MHC). PA has an internal hydrogen bond that controls the evolution of its decomposition. The decomposition was studied following excitation to two of its lowest excited states reached by laser irradiation at 351 and 193 nm. The photodissociation dynamics in the absence and presence of collisions was monitored and compared. Understanding the UV photochemistry requires the use of complementary experimental approaches. Two methods were enlisted, which together generated a comprehensive and detailed set of results: (i) The time-sliced velocity map imaging (SVMI) instrument at USC was exploited to determine kinetic energy release of fragments, fast dissociation timescales, and internal state distributions of fragments for which Resonance Enhanced Multiphoton Ionization (REMPI) schemes exist; and (ii) The multiplexed photoionization mass spectrometer (MPIMS) setup developed at the Sandia Combustion Research Facility was used for product discovery, achieved by exploiting tunable narrowband VUV radiation at the Advanced Light Source (ALS), and to follow in real time their subsequent unimolecular and bimolecular reactions. The experimental conditions ranged from collisionless molecular beams to study nascent products to flow reactors of variable pressures to study subsequent bimolecular reactions of the products. The goals stated above were successfully accomplished. By exciting PA to its lowest excited state, MHC was identified as the only primary product and its isomerization to vinylalcohol and acetaldehyde was directly observed in real time. Moreover, we reported the first bimolecular reaction of MHC, which was with acetaldehyde, and identified its reaction product. This paves the way for the study of other reactions of this important carbene intermediate. When excitation was carried out at 193 nm, which imparted much higher energy to PA, many more products were directly observed in real time, some deriving from three-body dissociation. Quantitative branching ratios and secondary reactions of radical products were also determined and analyzed. The studies of pyrazine and picoline focused on the second excited state of these molecules and showed (via ionization studies) that their excited states were very short lived (<100 fs) because of efficient couplings to lower electronic states via vibronic coupling. Theoretical work on modeling the absorption spectrum and decay mechanisms of the excited states are in progress in collaboration with theoreticians.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactive Image Processing for Meteorological Applications at NASA/Goddard Space Flight Center

The development of interactive image processing techniques which have led to meteorological data processing systems are discussed. Hardware and software functions of the existing Image Display and Manipulation System (IDAMS) and the special-purpose METPAK software package which has been developed for performing meteorology operations on IDAMS are described. A second-generation interactive image processing system, the Atmospheric and Oceanographic Information Processing System (AOIPS), which is under development, is also outlined. These systems are being designed to provide the necessary high throughput required for analysis of geostationary satellite data in the time domain.

Billingsley, J. B.↗

A general interactive system for compositing digital radar and satellite data

Reynolds and Smith (1979) have considered the combined use of digital weather radar and satellite data in interactive systems for case study analysis and forecasting. Satellites view the top of clouds, whereas radar is capable of observing the detailed internal structure of clouds. The considered approach requires the use of a common coordinate system. In the present investigation, it was decided to use the satellite coordinate system as the base system in order to maintain the fullest resolution of the satellite data. The investigation is concerned with the development of a general interactive software system called RADPAK for remapping and analyzing conventional and Doppler radar data. RADPAK is implemented as a part of a minicomputer-based image processing system, called Atmospheric and Oceanographic Image Processing System. Attention is given to a general description of the RADPAK system, remapping methodology, and an example of satellite remapping.

Ghosh, K. K.↗

A component decomposition model for evaluating atmospheric effects in remote sensing

A radiance value of a target pixel recorded by a remote sensor can be decomposed into three components: (1) attenuated target signature, (2) pure atmospheric radiation, and (3) the contribution made by the ground through the atmospheric scattering process. Given the meteorological and optical parameters of a layer-structured atmosphere, its transmittance and radiance distribution can be accurately calculated with a plane-parallel radiative transfer model. For a uniform surface, the ground contribution can be obtained by comparing radiances for an atmosphere over a black but nonemitting surface and the same atmosphere with an underlying ground of given albedo or temperature. For an inhomogeneous surface, the first two components remain the same as long as the surface is a plane. The third may be estimated using the locally averaged top-of-atmosphere radiance. An atmospheric point spread function is calculated by a Monte Carlo approach and is used for retrieving the ground signature through a deconvolution procedure.

Li, S.↗

Using global aerosol models and satellite data for air quality studies: Challenges and data needs

Aerosol particles, also known as PM2.5 (particle diameter less than 2.5 pm) and PM10 (particle diameter less than 10 pm), are one of the key atmospheric components that determines air quality. Yet, air quality forecasts for PM are still in their infancy and remain a challenging task. It is difficult to simply relate PM levels to local meteorological conditions, and large uncertainties exist in regional air quality model emission inventories and initial and boundary conditions. Especially challenging are periods when a significant amount of aerosol comes from outside the regional modeling domain through long-range transport. In the past few years, NASA has launched several satellites with global aerosol measurement capabilities, providing large-scale chemical weather pictures. NASA has also supported development of global models which simulate atmospheric transport and transformation processes of important atmospheric gas and aerosol species. I will present the current modeling and satellite capabilities for PM2.5 studies, the possibilities and challenges in using satellite data for PM2.5 forecasts, and the needs of future remote sensing data for improving air quality monitoring and modeling.

Chin, Mian↗

Can a Satellite-Derived Estimate of the Fraction of PAR Absorbed by Chlorophyll (FAPAR(sub chl)) Improve Predictions of Light-Use Efficiency and Ecosystem Photosynthesis for a Boreal Aspen Forest?

Gross primary production (GPP) is a key terrestrial ecophysiological process that links atmospheric composition and vegetation processes. Study of GPP is important to global carbon cycles and global warming. One of the most important of these processes, plant photosynthesis, requires solar radiation in the 0.4-0.7 micron range (also known as photosynthetically active radiation or PAR), water, carbon dioxide (CO2), and nutrients. A vegetation canopy is composed primarily of photosynthetically active vegetation (PAV) and non-photosynthetic vegetation (NPV; e.g., senescent foliage, branches and stems). A green leaf is composed of chlorophyll and various proportions of nonphotosynthetic components (e.g., other pigments in the leaf, primary/secondary/tertiary veins, and cell walls). The fraction of PAR absorbed by whole vegetation canopy (FAPAR(sub canopy)) has been widely used in satellite-based Production Efficiency Models to estimate GPP (as a product of FAPAR(sub canopy)x PAR x LUE(sub canopy), where LUE(sub canopy) is light use efficiency at canopy level). However, only the PAR absorbed by chlorophyll (a product of FAPAR(sub chl) x PAR) is used for photosynthesis. Therefore, remote sensing driven biogeochemical models that use FAPAR(sub chl) in estimating GPP (as a product of FAPAR(sub chl x PAR x LUE(sub chl) are more likely to be consistent with plant photosynthesis processes.

Zhang, Qingyuan↗

Department of Energy’s Atmospheric System Research (ASR) Program’s Workshop on the Future of Atmospheric Large Eddy Simulation (LES) (Workshop Report)

Large-eddy simulation (LES) is used as a tool to understand physical processes such as turbulence, aerosols, clouds, precipitation, radiation, the interactions among all these, and their interactions with the underlying surface. Over the next 10 years, LES will drive fundamental progress in open scientific questions in these areas as LES is increasingly used to gain understanding of complex interacting physical processes involving atmospheric turbulence. This growth will be driven both by scientific demand and the expansion of computational resources needed to conduct LES, and the form that the growth takes will largely be determined by how computational resources are leveraged for scientific gain. In particular, we suggest that computational resources are likely to be leveraged in two separate but not necessarily distinct ways. On one hand, growth in computational resources will allow LES to be made more routine, that is, performed more frequently, while on the other hand, the computational expense (measured in total floating point operations) afforded to individual LES will expand dramatically, allowing simulations to increase in both domain size and resolution as well as physical detail. Current U.S. Department of Energy (DOE) projects such as LES ARM Symbiotic Simulation and Observation Activity (LASSO) are leading the way in conducting routine LES, building large, public databases that are accessible for data science, sensitivity studies, and training for machine learning. LES will also become more routine as it becomes more accessible for individual researchers to address their scientific questions of interest. Scientific questions addressed by LES over the next 10 years are likely to include cloud organization and aggregation; aerosol cloud interactions and atmospheric chemistry (including geo-engineering); urban-scale LES; atmospheric extreme events, ranging from small-scale severe weather to wildfires; and ocean-wave-atmosphere interactions. Further LES-related research will likely grow significantly in areas related to societal impact studies of air quality and extreme weather events, applications to renewable energy forecasting and resource assessment, and aid in decision-making processes.

54 ENVIRONMENTAL SCIENCES↗

Kinetic Modeling of a Silicon Refining Process in a Moist Hydrogen Atmosphere

We developed a kinetic model that considers both silicon loss and boron removal in a metallurgical grade silicon refining process. This model was based on the hypotheses of reversible reactions. The reaction rate coefficient kept the same form but error of terminal boron concentration could be introduced when relating irreversible reactions. Experimental data from published studies were used to develop a model that fit the existing data. At 1500 °C, our kinetic analysis suggested that refining silicon in a moist hydrogen atmosphere generates several primary volatile species, including SiO, SiH, HBO, and HBO{sub 2}. Using the experimental data and the kinetic analysis of volatile species, we developed a model that predicts a linear relationship between the reaction rate coefficient k and both the quadratic function of p(H{sub 2}O) and the square root of p(H{sub 2}). Moreover, the model predicted the partial pressure values for the predominant volatile species and the prediction was confirmed by the thermodynamic calculations, indicating the reliability of the model. We believe this model provides a foundation for designing a silicon refining process with a fast boron removal rate and low silicon loss.

36 MATERIALS SCIENCE↗

OPTIMIZING MEASUREMENTS OF THE NEAR-SURFACE WATER CYCLE ON MARS: INSIGHTS FOR HABITABILITY.

The Martian regolith may act as a sink and source of water vapor for the lower atmosphere through processes such as frost formation, physisorption, solid-state hydration, and brine formation [e.g., 1- 12]. These processes are all dependent on temperature and humidity, as well as regolith properties such as porosity, tortuosity, and composition. In particular, the salty nature of the Martian regolith may increase its role in atmosphere-regolith interactions as hygroscopic salts interact with the ambient water vapor. Although to date experimental works near Mars-relevant conditions have constrained some of the potential effects of a salty regolith on water vapor exchange processes [e.g., 13-18], vital in situ measurements are lacking to link these to the near-surface water cycle on Mars. This is because previous and ongoing environmental payloads for landed Mars missions were not designed to investigate atmosphere-regolith exchange processes [12, 19-20]. Resolving the Martian near-surface water cycle is relevant to both climatic processes and astrobiology. There is the potential to presently form (meta)stable brines on Mars; their stability would be largely controlled by water vapor exchange processes [9, 21]. Here we argue for optimizing in situ measurements of water vapor exchange processes and regolith properties to advance our understanding of the local scale Martian water cycle and inform habitability studies.

E G Rivera-Valentin↗

Quantifying Spatial and Seasonal Variability in Atmospheric Ammonia with In Situ and Space-Based Observations

Ammonia plays an important role in many biogeochemical processes, yet atmospheric mixing ratios are not well known. Recently, methods have been developed for retrieving NH3 from space-based observations, but they have not been compared to in situ measurements. We have conducted a field campaign combining co-located surface measurements and satellite special observations from the Tropospheric Emission Spectrometer (TES). Our study includes 25 surface monitoring sites spanning 350 km across eastern North Carolina, a region with large seasonal and spatial variability in NH3. From the TES spectra, we retrieve a NH3 representative volume mixing ratio (RVMR), and we restrict our analysis to times when the region of the atmosphere observed by TES is representative of the surface measurement. We find that the TES NH3 RVMR qualitatively captures the seasonal and spatial variability found in eastern North Carolina. Both surface measurements and TES NH3 show a strong correspondence with the number of livestock facilities within 10 km of the observation. Furthermore, we find that TES H3 RVMR captures the month-to-month variability present in the surface observations. The high correspondence with in situ measurements and vast spatial coverage make TES NH3 RVMR a valuable tool for understanding regional and global NH3 fluxes.

Pinder, Robert W.↗

The ISPM solar-wind ion composition spectrometer

The International Solar Polar Mission (ISPM) Solar-Wind Ion Composition Spectrometer which determines elemental and ionic-charge composition, and the temperatures and mean speeds of all major solar-wind ions, from H through Fe, at solar wind speeds ranging from 145 km/sec (protons) to 1352 km/sec (Fe+8) is described. The instrument, which covers an energy per charge range from 110 eV/q to 66.7 keV/q in 13 min, combines an electrostatic analyzer with postacceleration, followed by a time-of-flight and energy measurement. Conditions and processes in the region of the corona where the solar wind is accelerated; location of the source regions of the solar wind in the corona; coronal heating processes; the extent and causes of variations in the composition of the solar atmosphere; plasma processes in the solar wind; acceleration of energetic particles in the solar wind; the thermalization and acceleration of interstellar ions in the solar wind, and their composition; and the composition and behavior of the plasma in the Jovian magnetosphere are studied.

Gloeckler, G.↗

Machine Learning Global Simulation of Nonlocal Gravity Wave Propagation

Global climate models typically operate at a grid resolution of hundreds of kilometers and fail to resolve atmospheric mesoscale processes, e.g., clouds, precipitation, and gravity waves (GWs).Model representation of these processes and their sources is essential to the global circulation and planetary energy budget, but subgrid scale contributions from these processes are often only approximately represented in models using parameterizations. These parameterizations are subject to approximations and idealizations, which limit their capability and accuracy. The most drastic of these approximations is the “single-column approximation” which completely neglects the horizontal evolution of these processes, resulting in key biases in current climate models. With a focus on atmospheric GWs, we present the first-ever global simulation of atmospheric GW fluxes using machine learning (ML) models trained on the WINDSET dataset to emulate global GW emulation in the atmosphere, as an alternative to traditional single-column parameterizations. Using an Attention U-Net-based architecture trained on globally resolved GW momentum fluxes, we illustrate the importance and effectiveness of global nonlocality, when simulating GWs using data-driven schemes.

Aman Gupta↗