Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aspect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Satellite sound broadcast research aspect in CRL

Researches on Satellite Sound Broadcasting Services (SSBS) have become active in the past few years. Activities of the Consultative Committee for International Radio (CCIR) and the World Administrative Radio Conference (WARC), especially about digital systems proposed in the CCIR report, are briefly reviewed. The Communications Research Laboratory (CRL) future plan of SSBS research, stressing propagation rather than communications aspects, is described.

Hase, Yoshihiro↗

Storage management in Ada. Three reports. Volume 1: Storage management in Ada as a risk to the development of reliable software. Volume 2: Relevant aspects of language. Volume 3: Requirements of the language versus manifestations of current implementations

The risk to the development of program reliability is derived from the use of a new language and from the potential use of new storage management techniques. With Ada and associated support software, there is a lack of established guidelines and procedures, drawn from experience and common usage, which assume reliable behavior. The risk is identified and clarified. In order to provide a framework for future consideration of dynamic storage management on Ada, a description of the relevant aspects of the language is presented in two sections: Program data sources, and declaration and allocation in Ada. Storage-management characteristics of the Ada language and storage-management characteristics of Ada implementations are differentiated. Terms that are used are defined in a narrow and precise sense. The storage-management implications of the Ada language are described. The storage-management options available to the Ada implementor and the implications of the implementor's choice for the Ada programmer are also described.

Auty, David↗

Static Footprint Local Forces, Areas, and Aspect Ratios for Three Type 7 Aircraft Tires

The National Tire Modeling Program (NTMP) is a joint NASA/industry effort to improve the understanding of tire mechanics and develop accurate analytical design tools. This effort includes fundamental analytical and experimental research on the structural mechanics of tires. Footprint local forces, areas, and aspect ratios were measured. Local footprint forces in the vertical, lateral, and drag directions were measured with a special footprint force transducer. Measurements of the local forces in the footprint were obtained by positioning the transducer at specified locations within the footprint and externally loading the tires. Three tires were tested: (1) one representative of those used on the main landing gear of B-737 and DC-9 commercial transport airplanes, (2) a nose landing gear tire for the Space Shuttle Orbiter, and (3) a main landing gear tire for the Space Shuttle Orbiter. Data obtained for various inflation pressures and vertical loads are presented for two aircraft tires. The results are presented in graphical and tabulated forms.

Howell, William E.↗

Manual control aspects of orbital flight

Studies of spacecraft rendezvous and docking operations began in the Gemini program in preparation for the two dockings required to send a crew to the moon and return them safely to Earth. However, the goal of getting to the moon before the end of the decade was of greater concern than mission optimization so little or no time or money was expended in researching human factors implications of operational aspects such as braking gates or control modes. Also, with sixteen operational dockings over a six year period (12 Apollo, 3 Skylab, and 1 ASTP) in the United States space program, economies of scale were not yet available to justify extensive research into decreasing the time or fuel necessary for a successful docking. With an operational space station era approaching in which orbital maneuvering vehicle (OMV), orbital transfer vehicle (OTV), shuttle orbiter, and other traffic will play a major role, a concerted research effort now could help avoid many potential problems later in addition to increasing safety, fuel economy, and productivity. A knowledge of manual control capabilities associated with piloted spaceflight could help save a life if the operational flight envelope can be safely enlarged to include faster dockings that currently envisioned. For example, current and future research is designed to acquire the appropriate information.

Brody, Adam R.↗

Design aspects and comparison between high T(sub c) superconducting coplanar waveguide and microstrip line

The high T sub c superconducting microstrip line and coplanar waveguide are compared in terms of the loss characteristics and the design aspects. The quality factor Q values for each structure are compared in respect to the same characteristic impedance with the comparable dimensions of the center conductor of the coplanar waveguide and the strip of the microstrip line. Also, the advantages and disadvantages for each structure are discussed in respect to passive microwave circuit applications.

Kong, K. S.↗

A review of the habitability aspects of prior space flights from the flight crew perspective with an orientation toward designing Space Station Freedom

Habitability is a very important issue in long-duration spaceflight. With this concern, a review of much of the existing U.S. Skylab, Spacelab, and some Soviet literature on habitability aspects of long-duratioin space flight was completed for the Astronaut Space Station Support Office. The data were organized to follow as closely as possible the SSF distributed systems, such as Life Support, Data Management, etc. A new definition of habitability is proposed.

Stramler, J. H.↗

Design aspects of long range supersonic LFC airplanes with highly swept wings

Studies on supersonic long-range LFC (laminar flow control) aircraft were performed with the aim of maximizing L/D and alleviating sonic boom during supersonic cruise. It is found that configurations with highly swept LFC wings of very high structural aspect ratio, with the sweep increasing toward the wing root and braced externally by wide chord laminarized struts, appear especially promising. In the supersonic cruise design condition the wing upper surface isobars are swept such that the flow in the direction normal to them is transonic with embedded supersonic zones and practically shock-free over most of the span, with M-perpendicular equal to the two-dimensional design values of advanced SC LFC airfoils, e.g., of the X-787 or X-6 type.

Pfenninger, W.↗

Aspects and applications of patched grid calculations

Patched grid calculations within the framework of an implicit, flux vector split upwind/relaxation algorithm for the Euler equations are presented. Aspects of computing on patched grids are discussed including the effect of a metric-discontinuous interface on the convergence rate of the algorithm, and the effect of curvature along an interface. Applications to a converging-diverging nozzle including effects of choking and bypass slots in two dimensions are presented.

Walters, Robert W.↗

Evaluation of a three-dimensional Navier-Stokes solver for transonic flow over a low-aspect-ratio wing mounted in a wind tunnel

A three dimensional Navier-Stokes solver is evaluated for transonic flow over a thin, swept, low-aspect ratio wing. The computational study was undertaken in support of a wind tunnel experimental program. The computational results are compared to experimental surface pressure data obtained in a cryogenic wind tunnel with an adaptive wall test section. The results show favorable agreement over a wide range of conditions, further the numerical results provide additional data of the complex three-dimensional flow field. Differences in the predictions and experiment suggest a need to conduct further experiments to evaluate the adaptive wall testing technique, and to model the tunnel sidewall boundary layer in the computations.

Milholen, William E., II↗

Aspects of the evolution of the marine boundary layer during cold-air outbreaks off the southeast coast of the United States

Remote sensing and in situ measurements that were obtained in February 1986 were combined with the results from a boundary-layer model to study aspects of the evolution of the maine boundary layer (MBL) during two cold-air outbreaks (CAO) off the southeast coast of the United States. Maximum total heat fluxes occurred over the Gulf Stream northeast of Cape Hatteras where very cold, dry air encountered the Gulf Stream and where the wind speeds were very large. Maximum 6-h values for the total heat flux were as high as 2015 W/m. The magnitude of the area-average heat flux in the MBL was influenced not only by the surface air and dewpoint temperatures and the surface wind speeds off the coast but also by the area covered by Gulf Stream water (sea surface temperature greater than 22 C). The heat flux distribution off the coast rapidly produced large horizontal temperature and humidity differences over distances on the order of 100 km.

Vukovich, Fred M.↗

Winglet effectiveness on low aspect ratio wings at supersonic Mach numbers

A computational study has been conducted on two wings of aspect ratios 1.244 and 1.865, each having 65-deg leading edge sweep angles, to determine the effects of nonplanar winglets at supersonic Mach numbers. A design Mach number of 1.62 was selected. The winglets studied were parametrically varied in alignment, length, sweep, camber, and thickness to determine the effects of winglet geometry on predicted performance. For the computational analysis, an existing Euler code that employed a marching technique was used. The results indicated that the possibility existed for wing-winglet geometries to equal the performance of wing-alone bodies in supersonic flows with both bodies having the same semispan length. The performance parameters of main interest were the lift-to-pressure drag ratio and the pressure drag coefficient as functions of lift coefficient. The lift coefficient range for this study was from -0.20 to 0.70 with emphasis on the range of 0.10 to 0.22.

Keenan, J. A.↗

Planform curvature effects on flutter characteristics of a wing with 56 deg leading-edge sweep and panel aspect ratio of 1.14

An experimental and analytical investigation was initiated to determine the effects of planform curvature (curving the leading and trailing edges of a wing in the X-Y plane) on the transonic flutter characteristics of a series of three moderately swept wing models. Experimental flutter results were obtained in the Langley Transonic Dynamics Tunnel for Mach numbers from 0.60-1.00, with air as the test medium. The models were semispan cantilevered wings with a 3 percent biconvex airfoil and a panel aspect ratio of 1.14. The baseline model had straight leading and trailing edges (i.e., no planform curvature). The radii of curvature of the leading edges for these two models were 200 and 80 inches. The radii of curvature of the leading edges of the other two models were determined so that the root and tip chords were identical for all three models. Experimental results showed that flutter-speed index and flutter frequency ratio increased as planform curvature increase (radius of curvature of the leading edge was decreased) over the test range of Mach numbers. Analytical flutter results were calculated with a subsonic flutter-prediction program, and they agreed well with the experimental results.

Keller, Donald F.↗

Macromolecular recognition: Structural aspects of the origin of the genetic system

Theoretical simulation of prebiotic chemical processes is an invaluable tool for probing the phenomenon of evolution of life. Using computational and modeling techniques and guided by analogies from present day systems we, seek to understand the emergence of genetic apparatus, enzymatic catalysis and protein synthesis under prebiotic conditions. In one possible scenario, the RNA enzymatic reaction plays a key role in the emergence of the self-replicating and offers a clue to the onset of enzymatic catalysis prior to the existence of the protein biosynthetic machinery. Our ultimate goal is to propose a simple RNA segment which contains the specificity and catalytic activity of the contemporary RNA enzyme and which could emerge in a primordial chemical environment. To understand the mechanism of ribozyme catalyzed reactions, ab initio and semi-empirical (ZINDO) programs were used to investigate the reaction path of transphosphorylation. A special emphasis was placed on the possible catalytic and structural roles played by the coordinated magnesium cation. Both the inline and adjacent mechanisms of transphosphorylation have been studied. Another important aspect of this reaction is the identity of the functional groups which are essential for the acid base catalysis. The structural characteristics of the target helices, particularly a possible role of G center dot T pair, is under examination by molecular dynamics (MD) simulation technique. Modeling of the ancestral aminoacyl-tRNA synthetases (aRS) may provide important clues to the emergence of the genetic code and the protein synthetic machinery. Assuming that the catalytic function evolved before the elements of specific recognition of a particular amino acid, we are exploring the minimal structural requirements for the catalysis of tRNA aminoacylation. The molecular modeling system SYBYL was used for this study based on the high resolution crystallographic structures of the present day tyrosyl-adenylate:tyrRS and tRNA(Gln): ATP:glnRS complexes. The trinucleotide CCA of the 3'-end tRNA is placed into the active site pocket of tyrRS, based on the scheme of interaction between tRNA(Gln) and glnRS, and upon the stereochemistry of the tyrRS:tRNA:Tyr-AMP transition state. This provides a model of the non-specific recognition of a tRNA's 3'-end by an aRS, which might be similar to that of the ancestral aRS's. In the next step, modeling of the rest of the acceptor stem of tRNA (Tyr) with tyrRS is carried out.

Rein, Robert↗

The effects of winglets on low aspect ratio wings at supersonic Mach numbers

A computational study was conducted on two wings, of aspect ratios 1.244 and 1.865, each having 65 degree leading edge sweep angles, to determine the effects of nonplanar winglets at supersonic Mach numbers. A Mach number of 1.62 was selected as the design value. The winglets studied were parametrically varied in alignment, length, sweep, camber, thickness, and dihedral angle to determine which geometry had the best predicted performance. For the computational analysis, an available Euler marching technique was used. The results indicated that the possibility existed for wing-winglet geometries to equal the performance of wing-alone bodies in supersonic flows with both bodies having the same semispan. The first wing with winglet used NACA 1402 airfoils for the base wing and was shown to have lift-to-pressure drag ratios within 0.136 percent to 0.360 percent of the NACA 1402 wing-alone. The other base wing was a natural flow wing which was previously designed specifically for a Mach number of 1.62. The results obtained showed that the natural wing-alone had a slightly higher lift-to-pressure drag than the natural wing with winglets.

Keenan, James A.↗

Occultation analysis of BATSE data: Operational aspects

The Burst and Transient Source Experiment (BATSE) large area detectors are being used to monitor hard x-ray/gamma ray sources on a daily basis for evidence of transient behavior. Flux measurements are performed using a simple earth occultation technique. Daily searches are also being performed to detect occultation steps of sources which are not being routinely monitored. Topics concerning the operational aspects of the occultation measurements are presented. Preliminary spectral results are also presented for several of the brighter sources.

Harmon, B. A.↗

An investigation of the information propagation and entropy transport aspects of Stirling machine numerical simulation

Aspects of the information propagation modeling behavior of integral machine computer simulation programs are investigated in terms of a transmission line. In particular, the effects of pressure-linking and temporal integration algorithms on the amplitude ratio and phase angle predictions are compared against experimental and closed-form analytic data. It is concluded that the discretized, first order conservation balances may not be adequate for modeling information propagation effects at characteristic numbers less than about 24. An entropy transport equation suitable for generalized use in Stirling machine simulation is developed. The equation is evaluated by including it in a simulation of an incompressible oscillating flow apparatus designed to demonstrate the effect of flow oscillations on the enhancement of thermal diffusion. Numerical false diffusion is found to be a major factor inhibiting validation of the simulation predictions with experimental and closed-form analytic data. A generalized false diffusion correction algorithm is developed which allows the numerical results to match their analytic counterparts. Under these conditions, the simulation yields entropy predictions which satisfy Clausius' inequality.

Goldberg, Louis F.↗

Low aspect ratio wing code validation experiment

An experiment was performed on a low-aspect ratio wing to define the limits of the validity of codes which are used to predict the flow over modern fighter configurations. The focus of the experiment is to provide data at or near the true operating conditions of transonic aircraft. The Reynolds numbers reached in this experiment reproduce those experienced by an aircraft with a 5-m root chord, flying at 14 to 16 km, from Mach 0.6 to 0.8. The angle-of-attack range of the experiment extends into the regime of leading-edge separation.

Olsen, Michael E.↗