Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analytical methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Rapid discrimination of granitic rock compositions by low-resolution near-infrared reflectance

The slopes of near-infrared spectra between approximately 1 and 2 microns from quartz-bearing plutonic rocks are strongly correlated with rock chemistry determined by X-ray spectrometry. The empirically derived predictive equations provide compositional data of adequate precision and resolution to discern patterns of regional geochemical variation in granitic batholithic rocks of southern California. As an analytical method, infrared spectrometry is rapid and inexpensive, and the method has potential in applications to direct field measurements and to data from aircraft and spacecraft scanner systems of relatively low spectral and spatial resolution, provided vegetative cover and surface alteration are not prohibitively masking.

Baird, A. K.↗
NASA NTRS1984

The great Tambora eruption in 1815 and its aftermath

The events consequent to the cataclysmic eruption of Mount Tambora, Indonesia, in April of 1815 are reconstructed by quantitative analytical methods which synthesize data and methods from the volcanological, oceanographic, glaciological, meteorological, climatological, astronomical and historical disciplines. This eruption is noteworthy in having been an order of magnitude greater in discharged pyroclastics volume than the Krakatau eruption of 1883, and further, in exceeding the size of any known eruption in the last 10,000 years. The mean temperature in the Northern Hemisphere dropped by 0.4 to 0.7 C in 1816 as a result of its dust veil. It is suggested that Tambora may be used as a calibrating standard in the investigation of other volcanic eruptions.

Stothers, R. B.↗
NASA NTRS1984

Analytical characterization of AOTV perigee aerothermodynamic regime

In preliminary design studies of AOTV (Aeroassisted Orbital Transfer Vehicle) configurations, it is desirable to have a simple analytical method for characterizing the aerothermodynamic regime at skip trajectory perigee as a function of vehicle L/D and m/CDA (ballistic coefficient). The present study derives an approximate perigee solution from the generalized equations of motion. For a prescribed entry velocity vector, the solution determines a Zeta function (proportional to density divided by m/CDA) at perigee as a parametric function of the exit velocity vector and (constant) L/D. The perigee Zeta function then determines perigee density (or altitude) as a parametric function of m/CDA. The solution allows the following classic aerothermodynamic parameters to be determined at perigee as parametric functions of m/CDA, L/D, and the exit velocity vector: Reynolds Number (viscous effects), Mach Number (compressibility effects), Knudsen Number (rarefaction effects), sphere and disk bow shock standoff distance, Damkohler Number (relaxation effects), viscous correlation parameter (viscid-inviscid interactions), and Stanton Number (convective heat transfer). Results of the analysis are given for low L/D and mid L/D AOTV configurations on return from geosynchronous and L5 orbits. It is concluded the method successfully provides preliminary estimates of the aerothermodynamic parameters through the use of simple algebraic equations and plots.

Desautel, D.↗
NASA NTRS1984

Geobotanical discrimination of ultramafic parent materials An evaluation of remote sensing techniques

Color and color infrared aerial photography and imagery acquired from a Daedalus DEI-1260 multispectral airborne scanner were employed in an investigation to discriminate ultramafic rock types in a test site in southwest Oregon. An analysis of the relationships between vegetation characteristics and parent materials was performed using a vegetation classification and map developed for the project, lithologic information derived from published geologic maps of the region, and terrain information gathered in the field. Several analytical methods, including visual image analysis, band ratioing, principal components analysis, and contrast enhancement and subsequent color composite generation were used in the investigation. There was a close correspondence between vegetation types and major rock types. These were readily discriminated by the remote sensing techniques. It was found that ultramafic rock types were separable from non-ultramafic rock types and serpentine was distinguishable from non-serpentinized peridotite. Further investigations involving spectroradiometric and digital classification techniques are being performed to further identify rock types and to discriminate chromium and nickel-bearing rock types.

Mouat, D. A.↗
NASA NTRS1984

On the prediction of auto-rotational characteristics of light airplane fuselages

A semi-empirical theory is presented for the estimation of aerodynamic forces and moments acting on a steadily rotating (spinning) airplane fuselage, with a particular emphasis on the prediction of its auto-rotational behavior. This approach is based on an extension of the available analytical methods for high angle of attack and side-slip and then coupling this procedure with strip theory for application to a rotating airplane fuselage. The analysis is applied to the fuselage of a light general aviation airplane and the results are shown to be in fair agreement with experimental data.

Pamadi, B. N.↗
NASA NTRS1984

An approach to autonomous, onboard orbit determination

An orbit determination subsystem that will operate as an integral part of an autonomous, onboard navigation system is presented and analyzed. The navigation system is required to interface solely with the downlink telemetry stream and uplink command stream of an existing class of geostationary satellites. In particular, the orbit will be determined from a set of onboard sensors, which previously were used only for attitude determination. The design of the orbit determination subsystem is described in detail. The rationale behind the choice of each component of the design is given. Finally, the performance of the orbit determination subsystem, under a variety of assumptions, is determined by a combination of numerical simulation and analytical methods.

Mease, K. D.↗
NASA NTRS1984

Vibrations of twisted cantilevered plates - Experimental investigation

The experimental portion of a joint government/industry/university research study on the vibrational characteristics of twisted cantilevered plates is presented. The overall purpose of the research study was to assess the capabilities and limitations of existing analytical methods in predicting the vibratory characteristics of twisted plates. Thirty cantilevered plates were precision machined at the Air Force's Aero Propulsion Laboratory. These plates, having five different degrees of twist, two thicknesses, and three aspect ratios representative of turbine engine blade geometries, were tested for their vibration mode shapes and frequencies. The resulting nondimensional frequencies and selected mode shapes are presented as a function of plate tip twist. The trends of the natural frequencies as a function of the governing geometric parameters are discussed. The effect of support compliance on the plate natural frequency and its impact on numerically modeling twisted plates is also presented.

Macbain, J. C.↗
NASA NTRS1984

Electrical self-calibration of nonideal bolometers

An analytical method for determining the absorbed energy calibration of an IR bolometer from purely electrical measurements is presented. The technique is targeted at detectors with purely electrical nonlinearities. It is shown that the responsivity can be derived from the I-V plot if the limiting high-frequency impedance is measured. The electrical nonlinearity is then the difference between the impedance and the dc resistance. The model is used for designing a circuit for measuring the relative impedance parameters. The results are applicable to studies of IR sources and the detection of energy pulses with bolometers.

Mather, J. C.↗
NASA NTRS1985

Resin Characterization in Cured Composite Materials

Molecular-level characterization of polymeric matrix resin in cured graphite-reinforced composite materials now determined through analysis of diffuse reflectance (DR) with Fourier Transform Infrared (FTIR) spectroscopy. Improved analytical method based on diffuse reflectance. DR/ FTIR technique successfully applied to analysis of several different composites and adhesives impossible to analyze by conventional methods.

Young, P. R.↗
NASA NTRS1985

The space shuttle ascent vehicle aerodynamic challenges configuration design and data base development

The phase B Space Shuttle systems definition studies resulted in a generic configuration consisting of a delta wing orbiter, and two solid rocket boosters (SRB) attached to an external fuel tank (ET). The initial challenge facing the aerodynamic community was aerodynamically optimizing, within limits, this configuration. As the Shuttle program developed and the sensitivities of the vehicle to aerodynamics were better understood the requirements of the aerodynamic data base grew. Adequately characterizing the vehicle to support the various design studies exploded the size of the data base to proportions that created a data modeling/management challenge for the aerodynamicist. The ascent aerodynamic data base originated primarily from wind tunnel test results. The complexity of the configuration rendered conventional analytic methods of little use. Initial wind tunnel tests provided results which included undesirable effects from model support tructure, inadequate element proximity, and inadequate plume simulation. The challenge to improve the quality of test results by determining the extent of these undesirable effects and subsequently develop testing techniques to eliminate them was imposed on the aerodynamic community. The challenges to the ascent aerodynamics community documented are unique due to the aerodynamic complexity of the Shuttle launch. Never before was such a complex vehicle aerodynamically characterized. The challenges were met with innovative engineering analyses/methodology development and wind tunnel testing techniques.

Dill, C. C.↗
NASA NTRS1984

Aerodynamic heating rate distributions induced by trailing edge controls on hypersonic aircraft configurations at Mach 8

Aerodynamic surface heating rate distributions in three dimensional shock wave boundary layer interaction flow regions are presented for a generic set of model configurations representative of the aft portion of hypersonic aircraft. Heat transfer data were obtained using the phase change coating technique (paint) and, at particular spanwise and streamwise stations for sample cases, by the thin wall transient temperature technique (thermocouples). Surface oil flow patterns are also shown. The good accuracy of the detailed heat transfer data, as attested in part by their repeatability, is attributable partially to the comparatively high temperature potential of the NASA-Langley Mach 8 Variable Density Tunnel. The data are well suited to help guide heating analyses of Mach 8 aircraft, and should be considered in formulating improvements to empiric analytic methods for calculating heat transfer rate coefficient distributions.

Kaufman, L. G., II↗
NASA NTRS1985

Thrust chamber life prediction

The reusable life of the Space Shuttle main engine (SSME) is influenced by the cyclic life of the regeneratively liquid cooled main combustion chamber (MCC). During an operational duty cycle the MCC liner is subjected to a large transient thermal gradient that imparts a high thermal cyclic strain to the liner hot gas wall. Life predictions of such chambers have usually been based on low cycle fatigue (LCF) evaluations. Hot-fire testing, however, has shown significant mid-channel wall deformation and thinning during accrued cyclic testing. This phenomenon is termed cyclic creep and appears to be significantly accelerated at elevated temperatures. An analytical method that models the cyclic creep phenomenon and its application to thrust chamber life prediction is presented. The chamber finite element geometry is updated periodically to account for accrued wall thinning and distortion. Failure is based on the tensile instability failure criterion. Cyclic life results for several chamber life enhancing coolant channel designs are compared to the typically used LCF analysis that neglects cyclic creep. The results show that the usable cyclic creep life is approximately 30 to 50% of the commonly used LCF life.

Kasper, H. J.↗
NASA NTRS1985

Fault detection and accommodation testing on an F100 engine in an F-15 airplane

The fault detection and accommodation (FDA) methodology for digital engine-control systems may range from simple comparisons of redundant parameters to the more complex and sophisticated observer models of the entire engine system. Evaluations of the various FDA schemes are done using analytical methods, simulation, and limited-altitude-facility testing. Flight testing of the FDA logic has been minimal because of the difficulty of inducing realistic faults in flight. A flight program was conducted to evaluate the fault detection and accommodation capability of a digital electronic engine control in an F-15 aircraft. The objective of the flight program was to induce selected faults and evaluate the resulting actions of the digital engine controller. Comparisons were made between the flight results and predictions. Several anomalies were found in flight and during the ground test. Simulation results showed that the inducement of dual pressure failures was not feasible since the FDA logic was not designed to accommodate these types of failures.

Myers, L. P.↗
NASA NTRS1985

Numerical Descriptions of Cosmic-Ray Transport

The behavior of energetic particles in the solar system is described by a well known Fokker-Planck equation. Although analytic methods yield insight into the nature of its solutions, especially in the diffusion regime, calculations that go beyond diffusion are very complicated. The reliability of these calculations is of concern, because numerical methods are notorious for their errors and artifacts. The well known Milne problem of classical transport theory was analyzed with the aid of three different numerical methods. These are: (1) The method of eigenfunctions in which the distribution function is approximated by a sum of eigenfunctions of the scattering operator, (2) Numerical solutions of a finite difference aquation; and (3) Direct simulation of the scattering and streaming of individual particles with the aid of Monte Carlo methods.

Earl, J. A.↗
NASA NTRS1985

Range fluctuations of high energy muons passing through matter

The information about energy spectrum of sea level muons at high energies beyond magnetic spectrographs can be obtained from the underground intensity measurements if the fluctuations problems are solved. The correction factor R for the range fluctuations of high energy muons were calculated by analytical method of Zatsepin, where most probable energy loss parameter are used. It is shown that by using the R at great depth together with the slope, lambda, of the vertical depth-intensity (D-I) curve in the form of exp(-t/lambda), the spectral index, gamma, in the power law energy spectrum of muons at sea level can be obtained.

Minorikawa, Y.↗
NASA NTRS1984

Center-to-limb variation of a sunspot-associated microwave source

Observations of the simple bipolar active region McMath 16862, obtained with the Westerbork Synthesis Radio Telescope at 6.16 cm over six consecutive days, indicate two bright sources associated with the region's two main spots, as well as some weaker emission that may be associated with loop structures. Application of a novel analytical method has allowed the mapping of the vertical as well as the horizontal component of the sunspot magnetic field at specific locations in the low corona. While the vertical component decreases away from the source's center, the horizontal component has both a radial and an azimuthal part. These results are interpreted in terms of a force-free magnetic field model, as well as in terms of a dipole whose axis is inclined to the vertical.

Alissandrakis, C. E.↗
NASA NTRS1985

Coupled atmosphere/canopy model for remote sensing of plant reflectance features

Solar radiative transfer through a coupled system of atmosphere and plant canopy is modeled as a multiple-scattering problem through a layered medium of random scatterers. The radiative transfer equation is solved by the discrete-ordinates finite-element method. Analytic expressions are derived that allow the calculation of scattering and absorption cross sections for any plant canopy layer form measurable biophysical parameters such as the leaf area index, leaf angle distribution, and individual leaf reflectance and transmittance data. An expression for a canopy scattering phase function is also given. Computational results are in good agreement with spectral reflectance measurements directly above a soybean canopy, and the concept of greenness- and brightness-transforms of Landsat MSS data is reconfirmed with the computed results. A sensitivity analysis with the coupled atmosphere/canopy model quantifies how satellite-sensed spectral radiances are affected by increased atmospheric aerosols, by varying leaf area index, by anisotropic leaf scattering, and by non-Lambertian soil boundary conditions. Possible extensions to a 2-D model are also discussed.

Gerstl, S. A.↗