Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wind shear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

A flight-test and simulation evaluation of the longitudinal final approach and landing performance of an automatic system for a light wing loading STOL aircraft equipped with wing spoilers

As part of a comprehensive flight-test investigation of short takeoff and landing (STOL) operating systems for the terminal systems for the terminal area, an automatic landing system has been developed and evaluated for a light wing-loading turboprop-powered aircraft. An advanced digital avionics system performed display, navigation, guidance, and control functions for the test aircraft. Control signals were generated in order to command powered actuators for all conventional controls and for a set of symmetrically driven wing spoilers. This report describes effects of the spoiler control on longitudinal autoland (automatic landing) performance. Flight-test results, with and without spoiler control, are presented and compared with available (basically, conventional takeoff and landing) performance criteria. These comparisons are augmented by results from a comprehensive simulation of the controlled aircraft that included representations of the microwave landing system navigation errors that were encountered in flight as well as expected variations in atmospheric turbulence and wind shear. Flight-test results show that the addition of spoiler control improves the touchdown performance of the automatic landing system. Spoilers improve longitudinal touchdown and landing pitch-attitude performance, particularly in tailwind conditions. Furthermore, simulation results indicate that performance would probably be satisfactory for a wider range of atmospheric disturbances than those encountered in flight. Flight results also indicate that the addition of spoiler control during the final approach does not result in any measurable change in glidepath track performance, and results in a very small deterioration in airspeed tracking. This difference contrasts with simulations results, which indicate some improvement in glidepath tracking and no appreciable change in airspeed tracking. The modeling problem in the simulation that contributed to this discrepancy with flight was not resolved.

Brown, S. C.↗

Sixth Annual Workshop on Meteorological and Environmental Inputs to Aviation Systems, 26-28 October 1982, Tullahoma, Tenn

The six workshops whose proceedings are presently reported considered the subject of meteorological and environmental information inputs to aviation, in order to satisfy workshop-sponsoring agencies' requirements for (1) greater knowledge of the interaction of the atmosphere with aircraft and airport operators, (2) a better definition and implementation of meteorological services to operators, and (3) the collection and interpretation of data useful in establishing operational criteria that relate the atmospheric science input to aviation community operations. Workshop topics included equipment and instrumentation, forecasts and information updates, training and simulation facilities, and severe weather, icing and wind shear.

Camp, D. W.↗

Lidar observations of mixed layer dynamics - Tests of parameterized entrainment models of mixed layer growth rate

Ground based lidar measurements of the atmospheric mixed layer depth, the entrainment zone depth and the wind speed and wind direction were used to test various parameterized entrainment models of mixed layer growth rate. Six case studies under clear air convective conditions over flat terrain in central Illinois are presented. It is shown that surface heating alone accounts for a major portion of the rise of the mixed layer on all days. A new set of entrainment model constants was determined which optimized height predictions for the dataset. Under convective conditions, the shape of the mixed layer height prediction curves closely resembled the observed shapes. Under conditions when significant wind shear was present, the shape of the height prediction curve departed from the data suggesting deficiencies in the parameterization of shear production. Development of small cumulus clouds on top of the layer is shown to affect mixed layer depths in the afternoon growth phase.

Boers, R.↗

Thunderstorm cloud height-rainfall rate relations for use with satellite rainfall estimation techniques

Observational studies of thunderstorm cloud height-rainfall rate and cloud height-volume rainfall rate relations are reviewed with significant variations being noted among climatological regimes. Analysis of the Florida (summer) and Oklahoma (spring) relations are made using a one-dimensional cloud model to ascertain the important factors in determining the individual cloud-rain relations and the differences between the two regimes. In general, the observed relations are well simulated by the model-based calculations. The generally lower predicted rain rates in Oklahoma (as compared to Florida) result from lower precipitation efficiencies which are due to a combination of larger entrainment (related to larger vertical wind shear) and drier environment. The generally steeper slope of the Oklahoma rain rate height curves is shown to be due to a stronger variation in maximum vertical velocity with cloud top height, which, in turn, is related to the greater static stability in the range of cloud tops. The impact of the regime-to-regime variations on empirical rain estimation schemes based on satellite-observed cloud height or cloud temperature information is discussed and a rain estimation approach based on model-generated cloud-rain relations is outlined.

Adler, R. F.↗

Investigations of severe/tornadic thunderstorm development and evolution based on satellite and AVE/SESAME/VAS data

The use of rapid scan satellite imagery to investigate the local environment of severe thunderstorms is discussed. Mesoscale cloud tracking and vertical wind shear as it affects thunderstorm relative flow are mentioned. The role of pre-existing low level cloud cover in the outbreak of tornadoes was investigated. Applying visible atmospheric sounding imagery to mesoscale phenomena is also addressed.

Vonderhaar, T. H.↗

Space and Time Variations and Turbopause Dynamical Structure

Time spectra of the critical frequency f sub o E sub s and blanketing frequency f sub b E sub s for the records of a spaced chain of ionosphere vertical sounding stations were studied by means of a maximum entropy method, while coherence spectra were analyzed with the Blackman and Tukey method. It was found out that the frequency parameters spectrum of E sub s within the range of 1-10 cycles/h are discrete with one or two maxima. The first, a low frequency maximum with T=40 min, is of larger amplitude, stable and exists permanently; the second one with T = 10 min is less stable, occurs irregularly and more often within f sub o E sub s. Further, the first maximum corresponds to a higher level of coherence which decreases as the distance to the stations increases. It is concluded that the low-frequency maximum is induced by cellular eddies, usually interpreted as wind shears with horizontal dimensions of not more than 300 km. Irregularity, small amplitude, and low coherence in the range of the second maximum are indicative of the fact that turbulence must be its only source.

Ovezgeldiyev, O. G.↗

The structure of the convective atmospheric boundary layer as revealed by lidar and Doppler radars

Results on the structure of the convective atmospheric boundary layer based on the analyses of data from the instrumented NSSL-KTVY tower, airborne Doppler lidar, and ground-based Doppler radars are presented. The vertically averaged wind over the boundary layer was found to be insensitive to baroclinicity, supporting the hypothesis of Arya and Wyngaard (1975). The computed momentum flux profiles were affected by baroclinicity. Horizontal wind spectra from lidar, radar, and tower data compared well with each other both in shape and magnitude. A consistent peak found near 4 km in all the computed spectra might have been caused by horizontally symmetric cells with horizontal wavelength 4 times the boundary-layer height as shown in Kuettner (1971) for the case of weak wind shear.

Eilts, M. D.↗

The design, development, and flight testing of a modern-control-designed autoland system

This paper discusses the design, development, and flight test results of a full-state feedback modern-controls-designed autoland system - the Digital Integrated Automatic Landing System (DIALS). The lateral and longitudinal control laws were designed by formulating a linear quadratic regulator with disturbances problem. Although the designs were independent of each other, in implementation cross-coupling of the lateral and longitudinal variables does occur. A brief discussion of the control modes - localizer capture, localizer track, decrab, glideslope capture, glideslope track, and flare - and the modifications made to the basic design during the simulation phase to achieve desired performance is given. Some of the efforts required to implement the system in the flight computers and some problems encountered in the ground hardware simulation checkout are discussed. Finally, flight test data is presented for this system which performed 10 'hands off' automatic landings. The flight test data includes the performance of the aircraft in mild, gust, and wind shear conditions.

Hueschen, R. M.↗

Diagnosing the severe thunderstorm environment by mesoscale cloud tracking - A new approach and new information

A new method for cloud tracking and observing storm development using satellite imagery in a cloud relative mode is presented. This method changes the analyst's function to one of monitoring cloud growth and changes over a finite time period and identifying portions of the cloud that are suitable for use as trackers. It is shown how many problems previously encountered by meteorologists in mesoscale cloud tracking can be overcome by using the cloud relative technique to determine mesoscale flow fields whose heights are determined using stereographic techniques. By separating growth and decay from cloud motion in a cumulus field using the method and accurately defining cloud heights, vertical wind shears within mesoscale domains may be defined. When this information is used to study the relative velocity of flows at different levels with respect to a developing or mature storm, improved insight into storm behavior can be achieved.

Purdom, J. F. W.↗

Optimal flight paths through microburst wind profiles

The problem of safe microburst wind shear encounter during the approach and climb-out flight phases is addressed using flight path optimization. The purpose was to investigate the physical limits of safe penetration and to determine control strategies that take full advantage of those limits. Optimal trajectories for both jet transport and general aviation aircraft were computed for encounters with idealized and actual microburst profiles. The results demonstrate that limits to control system design rather than to the aircraft's physical performance may be the deciding factor in an aircraft's capability for safe passage through a wide class of microbursts. The best control strategies responded to airspeed loss in an unconventional manner: by raising the nose to maintain lift.

Psiaki, M. L.↗

Lidar observations of vertically organized convection in the planetary boundary layer over the ocean

Observations of a convective planetary boundary layer (PBL) were made with an airborne, downward-looking lidar system over the Atlantic Ocean during a cold air outbreak. The lidar data revealed well-organized, regularly spaced cellular convection with dominant spacial scales between two and four times the height of the boundary layer. It is demonstrated that the lidar can accurately measure the structure of the PBL with high vertical and horizontal resolution. Parameters important for PBL modeling such as entrainment zone thickness, entrainment rate, PBL height and relative heat flux can be inferred from the lidar data. It is suggested that wind shear at the PBL top may influence both entrainment and convective cell size.

Melfi, S. H.↗

Structure and evolution of a severe squall line over Oklahoma

The structure of a severe squall line that developed in Oklahoma on May 2, 1979, is presented during its growth and part of its mature period. The line was analyzed using radar, satellite, sounding, and surface data for examining, in particular, the cell propagation mechanisms, the three-dimensional structure of the squall line and individual cells during the mature period, the mass and moisture fluxes, and precipitation efficiency. Comparison of the 1979 Oklahoma squall line with other documented squall lines indicates less well organized down-drafts on the rear side at low levels to midlevels, and an absence of low level to midlevel inflow on the rear side. The magnitude of mass and moisture fluxes was comparable to previous squall line cases. At one point, the motion of the individual cells, initially associated with a synoptic scale cold front, takes a sharp rightward turn. The mechanism of the motion turn is explained in terms of conditions created by a combination of wind shear and moisture convergence and lifting.

Heymsfield, G. M.↗

A numerical study of global axisymmetric states and their stability to quasi-geostrophic disturbances

A steady, axisymmetric model of the general circulation is developed as a basis for climate stability studies. The model includes the effects of heating, rotation, and internal friction, but neglects topography. It is assumed that the axisymmetric flow may be modeled by making the Boussinesq and deep convection approximations. The hydrostatic assumption is not made, thus permitting the advective terms to be included in the vertical equation of motion. The initial set of five primitive equations is reduced to three equations in terms of the zonal velocity, meridional streamfunction, and the potential temperature perturbation. The application of the Boussinesq, deep convection, and quasi-geostrophic assumptions limits the ranges of the heating and rotation rates. For values not too far from typical atmospheric values, the model produces a stability boundary separating Hadley from Rossby flow. The boundary is characterized by a particular value of vertical wind shear, which suggests that baroclinic instability is the primary mechanism for the loss of stability. The initial growth rates are largest for longitudinal waves 4-7, also in agreement with studies of baroclinic instability.

Henderson, H. W.↗

Midlatitude tropical interactions during winter

Pre-FGGE and FGGE/MONEX data are used to identify short term midlatitude tropical and longitudinal interactions during the winter monsoon. These interactions occur as cold surges, which develop over the East Asian continent and penetrate deep into the tropics with fast gravity wave speed. The observed interactions that occur after a surge include cyclogenesis and enhanced convection in the equatorial region, feedback from equatorial convection to midlatitude circulation systems, tropical east-west (Walker) circulations, and cross-equatorial influence. These interactions are also studied theoretically by analytical solutions of linearized shallow water equations. Response to transient forcing (monsoon surges) are mainly in Rossby and Kelvin modes. When the forcing time scale is short, significant gravity modes are also excited. The responses closely resemble observed winter monsoon flow. Responses to stationary forcing show that deep (barotropic) motions propagate energy away into high latitudes and that shallow (baroclinic) motions are trapped around the equator. It is shown that the barotropic teleconnection-type response to tropical sources found in previous numerical studies was due to the specified vertical wind shear and surface friction.

Chang, C. P.↗

Implementation and flight tests for the Digital Integrated Automatic Landing System (DIALS). Part 1: Flight software equations, flight test description and selected flight test data

Five flight tests of the Digital Automated Landing System (DIALS) were conducted on the Advanced Transport Operating Systems (ATOPS) Transportation Research Vehicle (TSRV) -- a modified Boeing 737 aircraft for advanced controls and displays research. These flight tests were conducted at NASA's Wallops Flight Center using the microwave landing system (MLS) installation on runway 22. This report describes the flight software equations of the DIALS which was designed using modern control theory direct-digital design methods and employed a constant gain Kalman filter. Selected flight test performance data is presented for localizer (runway centerline) capture and track at various intercept angles, for glideslope capture and track of 3, 4.5, and 5 degree glideslopes, for the decrab maneuver, and for the flare maneuver. Data is also presented to illustrate the system performance in the presence of cross, gust, and shear winds. The mean and standard deviation of the peak position errors for localizer capture were, respectively, 24 feet and 26 feet. For mild wind conditions, glideslope and localizer tracking position errors did not exceed, respectively, 5 and 20 feet. For gusty wind conditions (8 to 10 knots), these errors were, respectively, 10 and 30 feet. Ten hands off automatic lands were performed. The standard deviation of the touchdown position and velocity errors from the mean values were, respectively, 244 feet and 0.7 feet/sec.

Hueschen, R. M.↗

A simple, objective analysis scheme for scatterometer data

A simple economical objective analysis scheme is devised and tested on real scatterometer data. It is designed to treat dense data such as those of the Seasat A Satellite Scatterometer (SASS) for individual or multiple passes, and preserves subsynoptic scale features. Errors are evaluated with the aid of sampling ('bootstrap') statistical methods. In addition, sensitivity tests have been performed which establish qualitative confidence in calculated fields of divergence and vorticity. The SASS wind algorithm could be improved; however, the data at this point are limited by instrument errors rather than analysis errors. The analysis error is typically negligible in comparison with the instrument error, but amounts to 30 percent of the instrument error in areas of strong wind shear. The scheme is very economical, and thus suitable for large volumes of dense data such as SASS data.

Levy, G.↗

Turbulence in a convective marine atmospheric boundary layer

The structure and kinetic energy budget of turbulence in the convective marine atmospheric boundary layer as observed by aircraft during a cold air outbreak have been studied using mixed layer scaling. The results are significantly different from those of previous studies under conditions closer to free convection. The normalized turbulent kinetic energy and turbulent transport are about twice those found during the Air Mass Transformation Experiment (AMTEX). This implies that for a given surface heating the present case is dynamically more active. The difference is mainly due to the greater importance of wind shear in the present case. This case is closer to the roll vortex regime, whereas AMTEX observed mesoscale cellular convection which is closer to free convection. Shear generation is found to provide a significant energy source, in addition to buoyancy production, to maintain a larger normalized turbulent kinetic energy and to balance a larger normalized dissipation. The interaction between turbulent pressure and divergence (i.e., pressure scrambling) is also found to transfer energy from the vertical to the horizontal components, and is expected to be stronger in roll vortices than in m esoscale cells. The sensible heat flux is found to fit well with a linear vertical profile in a clear or subcloud planetary boundary layer (PBL), in good agreement with the results of Lenschow et al., (1980). The heat flux ratio between the PBL top and the surface, derived from the linear fitted curve, is approximately -0.14, in good agreement with that derived from the lidar data for the same case. Near the PBL top, the heat flux profiles are consistent with those of Deardoff (1979) and Deardorff et al. (1980).

Chou, S.-H.↗