Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WALTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Impacts of Riparian and Non-riparian Woody Encroachment on Tallgrass Prairie Ecohydrology

Woody encroachment has impacted grassland ecohydrology worldwide, prompting management strategies aimed at woody vegetation removal to prevent or mitigate loss of water yield. For this work, we measured stream discharge following sustained cutting of riparian trees (2010–2020) in a native tallgrass prairie (northeastern Kansas, USA). Discharge has declined at this site since the 1980’s despite a concurrent increase in precipitation. This decline has been previously attributed to increased transpiration of stream water by riparian vegetation. We used water stable isotopes (δ 18 O and δ 2 H) to determine whether riparian grasses, shrubs, and trees primarily used stream/groundwater or soil water. Additionally, we quantified the increase in riparian and non-riparian woody cover (1978–2020) and combined it with sap-flux data to estimate changes in transpirative water loss. Sustained cutting of riparian trees did not result in increased discharge. Rather than stream/groundwater, the largest proportion of water used by riparian trees (Quercus spp.) was deep soil water. Cornus drummondii (clonal woody shrub) used a higher proportion of stream water and had greater overall variability in water-use. Riparian shrub cover increased about 57% from 1978 to 2020. Over the same time period, shrub cover increased about 20% in areas outside the riparian zone, resulting in an estimated 25% increase in daily transpirative water loss. Although stream water use was less than 50% for all riparian zone species, the total increase in shrub cover on this watershed, coupled with higher transpiration rates of shrubs, suggests that these woody species—within and outside the riparian zone—are key contributors to observed declines in stream flow in this system.

54 ENVIRONMENTAL SCIENCES↗

A General Framework for Monitoring Image Acquisition Workflow in the Radiology Environment: Timeliness for Acute Stroke CT Imaging

Many facets of an image acquisition workflow leave a digital footprint, making workflow analysis amenable to an informatics-based solution. This paper describes a detailed framework for analyzing workflow and uses acute stroke response timeliness in CT as a practical demonstration. We review methods for accessing the digital footprints resulting from common technologist/device interactions. This overview lays a foundation for obtaining data for workflow analysis. We demonstrate the method by analyzing CT imaging efficiency in the setting of acute stroke. We successfully used digital footprints of CT technologists to analyze their workflow. We presented an overview of other digital footprints including but not limited to contrast administration, patient positioning, billing, reformat creation, and scheduling. A framework for analyzing image acquisition workflow was presented. This framework is transferable to any modality, as the key steps of image acquisition, image reconstruction, image post processing, and image transfer to PACS are common to any imaging modality in diagnostic radiology.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Evaluation Challenges for the Application of Extended Reality Devices in Medicine

Augmented and virtual reality devices are being actively investigated and implemented for a wide range of medical uses. However, significant gaps in the evaluation of these medical devices and applications hinder their regulatory evaluation. Addressing these gaps is critical to demonstrating the devices’ safety and effectiveness. We outline the key technical and clinical evaluation challenges discussed during the US Food and Drug Administration’s public workshop, “Medical Extended Reality: Toward Best Evaluation Practices for Virtual and Augmented Reality in Medicine” and future directions for evaluation method development. Evaluation challenges were categorized into several key technical and clinical areas. Finally, we highlight current efforts in the standards communities and illustrate connections between the evaluation challenges and the intended uses of the medical extended reality (MXR) devices. Participants concluded that additional research is needed to assess the safety and effectiveness of MXR devices across the use cases.

60 APPLIED LIFE SCIENCES↗

From molecules to dynamic biological communities

Microbial ecology is flourishing, and in the process, is making contributions to how the ecology and biology of large organisms is understood. Ongoing advances in sequencing technology and computational methods have enabled the collection and analysis of vast amounts of molecular data from diverse biological communities. While early studies focused on cataloguing microbial biodiversity in environments ranging from simple marine ecosystems to complex soil ecologies, more recent research is concerned with community functions and their dynamics over time. Models and concepts from traditional ecology have been used to generate new insight into microbial communities, and novel system-level models developed to explain and predict microbial interactions. The process of moving from molecular inventories to functional understanding is complex and challenging, and never more so than when many thousands of dynamic interactions are the phenomena of interest. We outline the process of how epistemic transitions are made from producing catalogues of molecules to achieving functional and predictive insight, and show how those insights not only revolutionize what is known about biological systems but also about how to do biology itself. Examples will be drawn primarily from analyses of different human microbiota, which are the microbial consortia found in and on areas of the human body, and their associated microbiomes (the genes of those communities). Molecular knowledge of these microbiomes is transforming microbiological knowledge, as well as broader aspects of human biology, health and disease.

59 BASIC BIOLOGICAL SCIENCES↗

Expert assessment of vulnerability of permafrost carbon to climate change

Approximately 1700 Pg of soil carbon (C) are stored in the northern circumpolar permafrost zone, more than twice as much C than in the atmosphere. The overall amount, rate, and form of C released to the atmosphere in a warmer world will influence the strength of the permafrost C feedback to climate change. We used a survey to quantify variability in the perception of the vulnerability of permafrost C to climate change. Experts were asked to provide quantitative estimates of permafrost change in response to four scenarios of warming. For the highest warming scenario (RCP 8.5), experts hypothesized that C release from permafrost zone soils could be 19–45 Pg C by 2040, 162–288 Pg C by 2100, and 381–616 Pg C by 2300 in CO 2 equivalent using 100-year CH 4 global warming potential (GWP). These values become 50% larger using 20-year CH 4 GWP, with a third to a half of expected climate forcing coming from CH 4 even though CH 4 was only 2.3 % of the expected C release. Experts projected that two-thirds of this release could be avoided under the lowest warming scenario (RCP 2.6). These results highlight the potential risk from permafrost thaw and serve to frame a hypothesis about the magnitude of this feedback to climate change. However, the level of emissions proposed here are unlikely to overshadow the impact of fossil fuel burning, which will continue to be the main source of C emissions and climate forcing.

54 ENVIRONMENTAL SCIENCES↗

An overview of energy efficiency techniques in cluster computing systems

Two major constraints demand more consideration for energy efficiency in cluster computing: (a) operational costs, and (b) system reliability. Increasing energy efficiency in cluster systems will reduce energy consumption, excess heat, lower operational costs, and improve system reliability. Based on the energy-power relationship, and the fact that energy consumption can be reduced with strategic power management, we focus in this survey on the characteristic of two main power management technologies: (a) static power management (SPM) systems that utilize low-power components to save the energy, and (b) dynamic power management (DPM) systems that utilize software and power-scalable components to optimize the energy consumption. We present the current state of the art in both of the SPM and DPM techniques, citing representative examples. The survey is concluded with a brief discussion and some assumptions about the possible future directions that could be explored to improve the energy efficiency in cluster computing.

97 MATHEMATICS AND COMPUTING↗

Inverse point source location with the Helmholtz equation on a bounded domain

The problem of recovering acoustic sources, more specifically monopoles, from point-wise measurements of the corresponding acoustic pressure at a limited number of frequencies is addressed. To this purpose, a family of sparse optimization problems in measure space in combination with the Helmholtz equation on a bounded domain is considered in this study. A weighted norm with unbounded weight near the observation points is incorporated into the formulation. Optimality conditions and conditions for recovery in the small noise case are discussed, which motivates concrete choices of the weight. The numerical realization is based on an accelerated conditional gradient method in measure space and a finite element discretization.

97 MATHEMATICS AND COMPUTING↗

D3R grand challenge 4: blind prediction of protein–ligand poses, affinity rankings, and relative binding free energies

The Drug Design Data Resource (D3R) aims to identify best practice methods for computer aided drug design through blinded ligand pose prediction and affinity challenges. Herein, we report on the results of Grand Challenge 4 (GC4). GC4 focused on proteins beta secretase 1 and Cathepsin S, and was run in an analogous manner to prior challenges. In Stage 1, participant ability to predict the pose and affinity of BACE1 ligands were assessed. Following the completion of Stage 1, all BACE1 co-crystal structures were released, and Stage 2 tested affinity rankings with co-crystal structures. Finally, we provide an analysis of the results and discuss insights into determined best practice methods.

59 BASIC BIOLOGICAL SCIENCES↗

In situ X-ray measurements over large Q-space to study the evolution of oxide thin films prepared by RF sputter deposition

Sputter deposition is a versatile and industrially important deposition technique for thin films, with increasing demand for matching the characteristics of thin film materials to specific requirements. Additionally, the actual film properties are largely determined by sputtering parameters such as pressure conditions, temperature and power settings. By means of various X-ray diffraction and scattering techniques, it is shown that the characterization of film formation and growth is feasible in real time at synchrotron sources, thus adding an important dimension to the fundamental understanding of the evolution of thin film microstructure. In particular, grazing incidence small-angle X-ray scattering, grazing incidence X-ray powder diffraction and X-ray reflectometry are used in a complementary manner to study the influence of deposition temperature and substrate choice on the crystallization kinetics and growth of polycrystalline BaTiO 3 films.

36 MATERIALS SCIENCE↗

X-ray Inspection Model Validation with Physical Dosimetry

A non-functional printed circuit board assembly was developed using ULTIboard and a simple computational transport model was created for use with the Monte Carlo software MCNP. EBT 3 film radiography was used to compare with Monte Carlo simulation to validate the board representation. The computational transport model was then revised to include connection pins, solder balls, highly attenuating internal structures, and copper trace distribution. Results from the revised model were compared to the EBT 3 films to observe improvements to dose profiles. It was found that this method was useful in verifying the placement of components, as the dose profiles were observed to follow the same trends. The experiment was then repeated using XRQA 2 films to achieve the same level of contrast with 1% the dose of EBT 3 films. It was found that high contrast may be achieved using these films to identify major issues with the model geometry, at a cost of dose profile accuracy. A second validation method was applied to the model using 37 CaF 2 thermoluminescent dosimeters (TLDs). TLD measurements were compared with the simplified and complex transport models to identify the features that have the greatest impact on simulation accuracy. The TLD calibration to CaF 2 was found to be accurate within 5.6%, while calibration to dose in Si was found to be accurate within 4.7%. Finally, it was observed that the accurate representation of solder balls and proper modeling of highly attenuating internal structures had the greatest impact on simulation accuracy.

61 RADIATION PROTECTION AND DOSIMETRY↗

Optimized Viewing Techniques to Minimize Radiation Damage From X-ray Imaging Systems

X-ray inspection of ball grid arrays (BGAs) is typically performed at one or more viewing angles to examine adhesion sites for errors such as voids, joint cracking, or head-in-pillow. During this inspection process, the cir cuit board assembly is subject to ionizing radiation exposure, which can cause trapped charge within oxide layers of semiconductor devices. Some x-ray machines allow for programmable inspection routines, which could be used to optimize radiation exposure to semiconductor components. Using Monte Carlo methods, x-ray inspection of a BGA was simulated to determine a range of acceptable viewing angles. Dose rates to circuit board components were estimated at each inspection angle to determine the view resulting in optimized radiation exposure. Results showed that for each BGA, the maximum unobstructed viewing times without exceeding a 5 Gy dose limit to a single part ranged from 82 to 94 minutes. Using a radiation cost function method, optimized viewing across all components was found. Here, it was observed that for a consistent dose limit applied to silicon-based components, performing inspection with BGAs facing the x-ray source was optimal. A third method was applied, assigning individual dose limits based on empirical data from the NASA Goddard Space Flight Center radiation database. This method showed that optimized viewing maximizes the distance between the radiation source and highly sensitive components. It was also observed that cumulative effects from viewing two BGAs will influence viewing angles, causing the optimal view of one BGA to exist nearly 180° from the other.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiochemistry in RIB Studies

Radiochemistry can be an important tool in studies of nuclear reactions induced by radioactive ion beams (RIBs). RIB intensities are typically 10{sup 3}-10{sup 5} particles/s leading to very low reaction rates. The sensitivity of radiochemical methods and the ability to uniquely determine the atomic properties of the reaction products offer substantial advantages. The application of radiochemical techniques to study the fusion of {sup 9,11}Li with {sup 70}Zn and the 'inverse fission' of uranium is described.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design, construction, and use of a shipping case for radioactive sources used in the calibration of portal monitors in the radiation portal monitoring project

Pacific Northwest National Laboratory is working with US Customs and Border Protection to assist in the installation of radiation portal monitors. We need to provide radioactive sources – both gamma- and neutron-emitting – to ports of entry where the monitors are being installed. The monitors must be calibrated to verify proper operation and detection sensitivity. We designed a portable source-shipping case using numerical modeling to predict the neutron dose rate at the case’s surface. The shipping case including radioactive sources meets the DOT requirements for “limited quantity.” Over 300 shipments, domestic and international, were made in FY2008 using this type of shipping case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Intrinsic dosimetry of glass containers: A potential interrogation tool for nuclear forensics and waste management

Intrinsic dosimetry is the method of measuring total absorbed dose received by the walls of a container holding radioactive material. By considering the total absorbed dose received by a container in tandem with the physical characteristics of the radioactive material housed within that container, this method has the potential to provide law enforcement officials or waste management personnel with enhanced pathway information regarding the history of the container and its radioactive contents. We report the latest in a series of experiments designed to validate and demonstrate this newly developed tool. Thermoluminescence (TL) dosimetry was used to measure dose effects on the raw stock material of borosilicate container glass with time up to 60 days after gamma ray, x-ray, beta particle or ultraviolet irradiations at doses from 0.15 to 20 Gy. Two peaks were identified in the TL glow curve when irradiated with 60Co, a relatively unstable peak around 120°C and a more stable peak around 225°C. Signal strength of both peaks decayed with time. The minimum measurable dose using this technique was measured to be 0.15 Gy, which is roughly equivalent to a 24 hr irradiation at 1 cm from a 50 ng source of 60Co. After fading, this dose would still be observable approximately 1 year post-irradiation. Similar doses with beta particles and x-rays produced TL glow curves of lower intensity. The TL glow curves were separated into five peaks centered at approximately 120, 160, 225, 300, and 340°C. Differences in TL glow curve shape and intensity were observed for the glasses from different geographical origins. These differences can be explained by changes in the intensities of the five peaks. EPR results showed production of BOHC and E’ silica centers.

Clark, Richard A.↗

Preparation of Actinide Targets at Oregon State University

In this paper, we describe the preparation of actinide targets at Oregon State University. The preparation of the actinide fluorides is done by an aqueous precipitation procedure with yields of greater than 90%. A dual glove box system is used for the preparation of the fluorides of the high specific activity actinides and the subsequent vapor deposition. We compare and contrast targets made by vapor deposition and molecular plating. We discuss some new data on the structure of actinide targets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗