Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Variational”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of lot microstructure variations on detonation performance of the triaminotrinitrobenzene (TATB)-Based insensitive high explosive PBX 9502

PBX 9502 is an important insensitive high explosive due to its combination of safety properties and detonation performance. It is a polymer-bonded formulation consisting of 95 wt.% 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) as the high explosive crystal, bound with Kel F-800 (FK-800), a co-polymer of chlorotrifluoroethylene and vinylidene-fluoride. Two different types are used, one known as virgin that uses only pristine manufactured TATB, and a second known as recycled that has 50 wt.% of its TATB reclaimed from machining scraps of previously pressed virgin PBX 9502. Recycled lots have a higher percentage of fine particles compared to virgin lots, due to the fracturing and damage sustained by TATB crystals during pressing. We examine the influence that this TATB microstructure difference between virgin and recycled PBX 9502 has on detonation performance properties. New rate-stick geometry diameter effect, detonation front shape and cylinder expansion test data are obtained for two previously uncharacterized virgin lots and one recycled lot of PBX 9502. This is combined with previously published data for one virgin and one recycled lot for evaluation purposes. Detonation shock dynamics model calibrations are conducted on each of the five lots to provide an assessment of the detonation timing characteristics of virgin versus recycled PBX 9502 lots. For two of the virgin lots, detonations propagate slower in the rate-stick geometry than those in the two recycled lots. However, the other virgin lot tested has propagation rates comparable to that of the recycled lots for larger diameter rate-sticks. The latter result, though, is shown to be geometry dependent and depends on the range of detonation curvatures accessed in different geometries. New copper-confined, cylinder expansion tests are conducted on each of the three virgin and two recycled lots to obtain detonation product Jones-Wilkins-Lee equations of state, enabling an assessment of the metal push capabilities for each of the five lots. We find that the metal push capabilities, characterized by the evolution of the heat of detonation with volume, are similar between the virgin and recycled lots. Thus, changes in microstructure between different PBX 9502 lots seemingly affect the rate of reaction, but not the overall energy content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sensitivity of puff dynamics and airborne droplet nuclei distribution to variations in violent expiration events

Here, we use large eddy simulations to investigate the puff and droplet dynamics from violent expiratory events such as coughs and sneezes in the first few seconds following an ejection. For each of the eleven simulations considered, over 60,000 droplets are ejected and individually tracked using the point-particle Euler–Lagrange approach. We test the sensitivity of the puff and droplet dynamics to various parameters including the ejection volume, momentum, and orientation. We also explore the effect of the mouth shape on the aforementioned dynamics by considering elliptical and circular inlet cross-sections. The results from the simulations compare favorably with a recent theoretical framework put forth by Balachandar et al. in terms of the puff size and propagation velocity. More importantly however, the theory is able to accurately predict the number and size spectra of the potentially virus-laden droplet nuclei that remain airborne within the puff. We observe that the ejection angle and mouth shape do not significantly affect the puff and droplet dynamics. Additionally, we quantify the carrying capacity of the detached puff portions in terms of the number and size spectra of droplets/droplet nuclei suspended within.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Flow regime and Reynolds number variation effects on the mixing behavior of parallel flows

The hydraulic single-phase mixing of three parallel rectangular channels is experimentally investigated at various Reynolds numbers (Re) and flow regime combinations. Particle Image Velocimetry results for seven mixing cases are presented and discussed with varying Re combinations ranging from 1,824 to 20,844. While all cases result in the same Re ratio of ~0.69 between the inner and outer flows, two cases represent multi-regime mixing with the inner-outer regime pair of laminar-transitional and transitional-turbulent, while the other 5 cases are all characteristic of turbulent mixing with varying levels of turbulence. The outer channels initially share characteristics with a backward facing step. The center channel is found to initially behave like a slot jet, but then sees a significant increase in velocity decay. This inner flow velocity decay increased dramatically in the laminar-transitional mixing case, whose centerline velocity decay was ~6 times larger than the decay in the turbulent mixing cases. Second order statistics revealed a consistent mixing layer thickness of ~0.1 hydraulic diameters for all the cases but showed more intense shearing in the multi-regime mixing cases. The combined point and thereby the mixing layer length is determined using centerline velocity decay profiles, which show a much more aggressive mixing in multi-regime flows. Multi-regime mixing demonstrated superior characteristics relative to turbulent mixing due to a more dramatic velocity decay in the inner flow and a shorter mixing length. The contributions of this work include communicating the benefits of multi-regime mixing and providing detailed characterization efforts that can serve future efforts for validating computational models. Here this research also lays the groundwork for future studies aimed at achieving high levels of mixing without a severe penalty in pressure drop.

42 ENGINEERING↗
DOE OSTI2022

Intra-annual variation in microclimatic conditions in relation to vegetation type and structure in two tropical dry forests undergoing secondary succession

Microclimate acts as a strong filter on species performance in restored and regenerating forests, particularly in seasonally dry tropical forests (SDTF). Yet few studies have measured microclimate patterns across succession in SDTF. Furthermore, although dynamic vegetation models simulate microclimate, evaluation of these simulated variables with field observations has been relatively uncommon. Here, we investigated the seasonal patterns of soil temperature and soil water in naturally regenerated and planted successional vegetation in SDTF in Costa Rica and Puerto Rico, using complementary approaches of intensive field observations and simulation modeling with the Ecosystem Demography model. We found that plots representing later successional stages were wetter on average, but only during the dry season. During the wet season, mean soil water did not differ across vegetation types, but open, early successional vegetation experienced more frequent extreme wet and dry conditions than older forest and plantations. Soil temperature tended to decline with forest structure, and later successional vegetation also experienced less extreme daily temperature fluctuations. Basal area and leaf area index were the best predictors of differences in soil water and temperature across plots. Model simulations were consistent with observations of wet season soil temperature and soil water, but the model failed to reproduce dry season soil moisture dynamics, suggesting that further work is needed to reduce model biases in microclimate variables. Collectively, our results imply that common assumptions about how microclimates influence successional processes in SDTF should be revisited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Wettability variation and its impact on CO 2 storage capacity at the Wyoming CarbonSAFE storage hub: An experimental approach

Meeting global and national net zero carbon emission targets will require geologic carbon disposal. The U.S. Department of Energy (DOE) has accordingly funded significant research in this area, including the Wyoming CarbonSAFE project at Dry Fork Station (DFS) in Campbell County, Wyoming. This work studied wettability on micro- and macro-scales, CO 2 storage potential, and the correlation between the two to support the Wyoming CarbonSAFE project’s subsurface assessment. During the study, a target formation’s wettability was found to affect how much CO 2 can be stored in a given formation. Here, in this study, representative rock samples were selected from the target storage formations— Lakota, Hulett, and Minnelusa—based on the heterogeneity of the lithology, permeability, and porosity of the respective formations. The rock samples are all fine-grained sandstone with variable cementation and bedding structure, including different scales of laminated bedding. The porosity and permeability vary within the range of 9.0–14.3% and 0.1–28.9 mD, respectively. These rock samples were prepared for the micro-scale wettability (contact angle measurement), macro-scale wettability (wettability index derived from unsteady-state flow characterization for the core plugs), and CO 2 storage evaluation. The macro-scale experiments suggested that wettability appeared to dominate the CO 2 storage potential performance during the drainage process, where less water-wet behavior promoted higher CO 2 storage potential. The micro-scale wettability tests showed that the rock samples at the studied reservoir conditions behaved water-wet and became more water-wet as pressure increased. This kind of wettability change discourages further CO 2 storage potential yet benefits the CO 2 residual trapping as the CO 2 injection proceeds for the studied area. The results allow the recommendation of the best reservoir candidate for storage based on wettability that affects CO 2 storage. The work presented in this study provides valuable insights into wettability’s effect on the CO 2 storage capacity and wettability’s importance when identifying the optimal CO 2 storage formation to meet the project’s goals.

58 GEOSCIENCES↗
DOE OSTI2025

Quantifying spatial and vertical variations in soil C:N relationships in permafrost-affected landscapes

Permafrost regions are experiencing rapid changes that affect carbon (C) and nitrogen (N) cycles, with implications for vegetation dynamics and gas exchanges with the atmosphere. Soil C:N ratio is a key indicator of organic matter quality, yet spatial estimates of N stocks and C:N ratios lag behind those for C. We used quantile regression forests to compare direct and indirect digital soil mapping approaches for predicting soil C:N ratios at 0–30, 30–60, and 60–100 cm depths across a latitudinal transect in Alaska. The indirect approach – deriving C:N from separately predicted C and N stocks – outperformed direct mapping for the surface layer (0–30 cm), while direct mapping was marginally better at greater depths. However, prediction accuracy decreased with depth for both methods. Temperature and topography were the most important predictors. Both approaches overestimated low and underestimated high C:N ratios, with direct mapping showing greater bias. Our results underscore the challenges of modeling C:N ratios in heterogeneous, data-sparse permafrost soils, but also suggest that indirect mapping holds promise if supported by more extensive datasets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Exploring density and strength variations in asteroid 16 Psyche’s composition with 3D hydrocode modeling of its deepest impact structure

Asteroid 16 Psyche is the largest metallic Main Belt Asteroid and is the subject of a forthcoming NASA mission. The composition of Psyche is still unknown and subject of recent debate. In particular, how much porosity is within Psyche, along with how much of Psyche consists of non-metallic versus metallic materials, are central questions to the issue of Psyche’s composition. If Psyche is indeed predominantly composed of metallic materials, it would need to have considerable porosity (~ 30%–50%) for a composition consistent with its expected bulk density (~ 3.7–4.1 g/cm). In this work, we vary the density and strength of Psyche by including uniform and layered fields of pseudo-microporosity, in addition to investigating the presence of macroscopic voids, i.e., spaces larger than the size of the simulation’s mesh cells, in rubble-pile configurations. Further, all configurations result in bulk densities within the uncertainties of measured values, however the strength of Psyche and the distribution of pseudo-pores are varied. Through 3D computational models of Psyche’s deepest impact structure, we show that Psyche’s composition is unlikely to contain only pseudo-microporosity. Rather, rubble pile structures, which include macroscopic voids, are shown to match the crater’s measured aspect ratio better than simulations of structures that included only pseudo-microporosity.

3D↗