Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “V CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

711 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Toroidal modeling of runaway electron loss due to 3D fields in ITER

Mitigation of runaway electrons (REs) by three-dimensional (3D) magnetic field perturbations is numerically investigated for the ITER 15 MA baseline D–T scenario, utilizing the MARS-F code (Liu et al Phys. Plasmas 7 3681) with a drift orbit test particle tracing module. Considered are two types of 3D fields: the n = 3 (n is the toroidal mode number) resonant magnetic perturbation (RMP) utilized for the purpose of controlling the edge localized modes in ITER, and perturbations generated by the n = 1 magneto-hydrodynamic (MHD) instabilities in a post-disruption plasma. The RMP field, applied to a pre-disruption plasma, is found to be moderately effective in mitigating the RE seeds in ITER when vacuum field model is assumed. Up to ~40% loss fraction is possible at 90 kA-turn coil current. The mitigation efficiency is however substantially reduced, down to less than 5%, when the plasma response is taken into account. This is due to strong screening of the resonant magnetic field components by the plasma response resulting in much less field line stochasticity. On the other hand, the MARS-F modeling, based on the DINA-simulated post-disruption equilibria, shows that the n = 1 resistive kink instabilities develop in these plasmas, as the edge safety factor qa evolves and drops below integer numbers. RE mitigation by these MHD instabilities is sensitive to the eigenmode structure. The best mitigation is achieved as q a drops below 3, when a global kink instability occurs that encompasses both internal and external components. This global instability is found to be capable of mitigating over 80% MeV-level passing RE orbits at a field perturbation |δB|/B 0 that is comparable to that observed in DIII-D experiments, and full mitigation if the perturbation amplitude is doubled. The 'wetted' area on the ITER limiting surface, due to MHD instability induced RE loss, generally increases with the perturbation amplitude (together with increasing loss fraction). At the highest perturbation level assumed in this study, the wetted area reaches ~60% of the total limiting surface area. Lastly, the lost RE orbits mainly strike the outer divertor region of the limiting surface, with some fraction also hitting a wide area along the inboard side of the surface.

3D fields↗
DOE OSTI2026

Comparative mitogenomics of kingdom Fungi – evolutionary insights and metagenomic applications

Mitochondria are essential components of eukaryotic cells, responsible for ATP production through oxidative phosphorylation. Despite their biological importance, unique challenges have hindered the adoption of automated mitochondrial genome (mitogenome) annotation methods, obstructing mitochondrial comparative genomics in a broad evolutionary context. Using Fungi as a study system and a Joint Genome Institute (JGI) annotated high-quality reference set, we observed broad patterns of mitochondrial evolution across the kingdom. We found that the median fungal mitogenome size is 58 kb and identified exceptionally large examples over 1 Mb in Pezizomycetes. All 14 expected oxidative phosphorylation protein-coding genes, plus rps3, were generally conserved. We found evidence of major evolutionary transitions within the Ascomycota, including the transfer of mitochondrially encoded atp8 and atp9 to the nuclear genomes across the Pezizomycotina and shifts in mitogenome tRNA patterns across the kingdom. We found substantial concordance between mitochondrial and nuclear evolution, enabling us to document 3131 total fungal mitogenomes from JGI-derived metagenomic datasets. We also identified 6467 total undeclared mitogenomes embedded in Genbank fungal nuclear assemblies. We provide interactive tools for mitogenome analysis through the JGI MycoCosm platform. Collectively, this work generated nearly 10 000 new fungal mitogenome annotations, providing a foundation and resources for future exploration of comparative fungal mitogenomics.

Ahrendt, Steven R. [USDOE Joint Genome Institute (↗
DOE OSTI2023

The miniJPAS survey: AGN and host galaxy coevolution of X-ray-selected sources

Studies indicate strong evidence of a scaling relation in the local Universe between the supermassive black hole mass (MBH) and the stellar mass of their host galaxies (M * ). They even show similar histories across cosmic times of their differential terms: the star formation rate (SFR) and black hole accretion rate (BHAR). However, a clear picture of this coevolution is far from being understood. We selected an X-ray sample of active galactic nuclei (AGN) up to z = 2.5 in the miniJPAS footprint. Their X-ray to infrared spectral energy distributions (SEDs) have been modeled with the CIGALE code, constraining the emission to 68 bands, from which 54 are the narrow filters from the miniJPAS survey. For a final sample of 308 galaxies, we derived their physical properties, such as their M * , SFR, star formation history (SFH), and the luminosity produced by the accretion process of the central BH (L AGN ). For a subsample of 113 sources, we also fit their optical spectra to obtain the gas velocity dispersion from the broad emission lines and estimated the M BH . We calculated the BHAR in physical units depending on two radiative efficiency regimes. We find that the Eddington ratios (λ Edd ) and its popular proxy (L X /M * ) have a difference of 0.6 dex, on average, and a KS test indicates that they come from different distributions. Our sources exhibit a considerable scatter on the MBH - M * scaling relation, which can explain the difference between λ Edd and its proxy. We also modeled three evolution scenarios for each source to recover the integral properties at z = 0. Using the SFR and BHAR, we show a notable diminution in the scattering between MBH - M * . For the last scenario, we considered the SFH and a simple energy budget for the AGN accretion, and we retrieved a relation similar to the calibrations known for the local Universe. Our study covers ~1 deg 2 in the sky and is sensitive to biases in luminosity. Nevertheless, we show that, for bright sources, the link between the differential values (SFR and BHAR) and their decoupling based on an energy limit is the key that leads to the local M BH - M * scaling relation. In the future, we plan to extend this methodology to a thousand degrees of the sky using JPAS with an X-ray selection from eROSITA, to obtain an unbiased distribution of BHAR and Eddington ratios.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Trilinos: Enabling Scientific Computing across Diverse Hardware Architectures at Scale

Trilinos is a community-developed, open-source software framework that facilitates building large-scale, complex, multiscale, multiphysics simulation code bases for scientific and engineering problems. Since the Trilinos framework has undergone substantial changes to support new applications and new hardware architectures, this document is an update to “An Overview of the Trilinos project” by Heroux et al. (ACM Transactions on Mathematical Software, 31(3):397–423, 2005). It describes the design of Trilinos, introduces its new organization in product areas, and highlights established and new features available in Trilinos. Particular focus is put on the modernized software stack based on the Kokkos ecosystem to deliver performance portability across heterogeneous hardware architectures. This article also outlines the organization of the Trilinos community and the contribution model to help onboard interested users and contributors.

Heterogeneous Hardware Architectures↗
DOE OSTI2020

Economic Model for Estimation of GDP Losses in the MACCS Offsite Consequence Analysis Code

The MACCS (MELCOR Accident Consequence Code System) code is the U.S. Nuclear Regulatory Commission (NRC) tool used to perform probabilistic health and economic consequence assessments for atmospheric releases of radionuclides. It is also used by international organizations, both reactor owners and regulators. It is intended and most commonly used for hypothetical accidents that could potentially occur in the future rather than to evaluate past accidents or to provide emergency response during an ongoing accident. It is designed to support probabilistic risk and consequence analyses and is used by the NRC, U.S. nuclear licensees, the Department of Energy, and international vendors, licensees, and regulators. This report describes the modeling framework, implementation, verification, and benchmarking of a GDP-based model for economic losses that has recently been developed as an alternative to the original cost-based economic loss model in MACCS. The GDP-based model has its roots in a code developed by Sandia National Laboratories for the Department of Homeland Security to estimate short-term losses from natural and manmade accidents, called the Regional Economic Accounting analysis tool (REAcct). This model was adapted and modified for MACCS and is now called the Regional Disruption Economic Impact Model (RDEIM). It is based on input-output theory, which is widely used in economic modeling. It accounts for direct losses to a disrupted region affected by an accident, indirect losses to the national economy due to disruption of the supply chain, and induced losses from reduced spending by displaced workers. RDEIM differs from REAcct in its treatment and estimation of indirect loss multipliers, elimination of double counting associated with inter-industry trade in the affected area, and that it is designed to be used to estimate impacts for extended periods that can occur from a major nuclear reactor accident, such as the one that occurred at the Fukushima Daiichi site in Japan. Most input-output models do not account for economic adaptation and recovery, and in this regard RDEIM differs from its parent, REAcct, because it allows for a user-definable national recovery period. Implementation of a recovery period was one of several recommendations made by an independent peer review panel to ensure that RDEIM is state-of-practice. For this and several other reasons, RDEIM differs from REAcct. Both the original and the RDEIM economic loss models account for costs from evacuation and relocation, decontamination, depreciation, and condemnation. Where the original model accounts for an expected rate of return, based on the value of property, that is lost during interdiction, the RDEIM model instead accounts for losses of GDP based on the industrial sectors located within a county. The original model includes costs for disposal of crops and milk that the RDEIM model currently does not, but these costs tend to contribute insignificantly to the overall losses. This document discusses three verification exercises to demonstrate that the RDEIM model is implemented correctly in MACCS. It also describes a benchmark study at five nuclear power plants chosen to represent the spectrum of U.S. commercial sites. The benchmarks provide perspective on the expected differences between the RDEIM and the original cost-based economic loss models. The RDEIM model is shown to consistently predict larger losses than the original model, probably in part because it accounts for national losses by including indirect and induced losses; whereas, the original model only accounts for regional losses. Nonetheless, the RDEIM model predicts losses that are remarkably consistent with the original cost-based model, differing by 16% at most for the five sites combined with three source terms considered in this benchmark.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Overview of interpretive modelling of fusion performance in JET DTE2 discharges with TRANSP

In the paper we present an overview of interpretive modelling of a database of JET-ILW 2021 D-T discharges using the TRANSP code. The main aim is to assess our capability of computationally reproducing the fusion performance of various D-T plasma scenarios using different external heating and D-T mixtures, and to understand the performance driving mechanisms. We find that interpretive simulations confirm a general power-law relationship between increasing external heating power and fusion output, which is supported by absolutely calibrated neutron yield measurements. A comparison of measured and computed D-T neutron rates shows that the calculations' discrepancy depends on the absolute neutron yield. The calculations are found to agree well with measurements for higher performing discharges with external heating power above ~20 MW, while low-neutron shots display an average discrepancy of around +40% compared to measured neutron yields. A similar trend is found for the ratio between thermal and beam-target fusion, where larger discrepancies are seen in shots with dominant beam-driven performance. We compare the observations to studies of JET-ILW D discharges, to find that on average the fusion performance is well modelled over a range of heating power, although an increased unsystematic deviation for lower-performing shots is observed. The ratio between thermal and beam-induced D-T fusion is found to be increasing weakly with growing external heating power, with a maximum value of ≳1 achieved in a baseline scenario experiment. An evaluation of the fusion power computational uncertainty shows a strong dependence on the plasma scenario type and fusion drive characteristics, varying between ±25% and 35%. D-T fusion alpha simulations show that the ratio between volume-integrated electron and ion heating from alphas is ≲10 for the majority of analysed discharges. Alphas are computed to contribute between ~15% and 40% to the total electron heating in the core of highest performing D-T discharges. An alternative workflow to TRANSP was employed to model JET D-T plasmas with the highest fusion yield and dominant non-thermal fusion component because of the use of fundamental radio-frequency heating of a large minority in the scenario, which is calculated to have provided ~10% to the total fusion power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Optimal production of Phanerochaete chrysosporium manganese peroxidases and Trametes sp. C30 laccase hybrid Lac131 in Aspergillus niger for lignin bioconversion

Background Incorporating the production of related ligninolytic enzymes into industrial filamentous fungus Aspergillus niger will enhance the bioconversion of lignocelluloses to various chemical products. Results In this study, transgenic expression of Phanerochaete chrysosporium manganese peroxidases (mnps) and Trametes sp. C30 laccase hybrid Lac131 (lac131) were examined and optimized in A. niger 11414 prtT∆ strain. Five mnps (mnp1, mnp2, mnp3, mnp4, and mnp5) and lac131 genes were expressed separately or in combination. The transgenic strain containing the entire mnp2 genomic coding sequence (gmnp2) exhibited the highest mnP activity among the five mnp over-expression strains in the modified minimal medium (mMM) with addition of 5 g/L bovine hemoglobin (bHg). We examined the effects of hemin and bHg on mnP production in the gmnp2 strain cultures and found that at least 1 g/L bHg was required, while hemin was not. Culture conditions for mnP production were further optimized for the gmnp2 strain and the highest mnP activities were detected in the cultures grown at 25 °C and 200 rpm with an initial pH of 4.5. Effects of soy protein, skim milk, and bovine serum albumin on mnP production were investigated; 5 g/L of soy proteins or skim milk had comparable effects to 2.5 g/L bHg, while cultures with bovine serum albumin had diminished mnP activity. Disruption of both prtT and vsm1 substantially augmented the mnP production and its activity reached 575 U/L. Trametes sp. C30 laccase hybrid lac131 was strongly expressed in either A. niger gmnp2 (1975 U/L) or 11414prtT∆ (3895 U/L) strain. Both mnP and laccase in the culture supernatants effectively decolorized selected phenolic compounds (dyes) and cleaved tagged model lignin dimers. Conclusion The mnP was successfully produced in A. niger by optimizing the culture conditions and host strain. Co-expression of all four mnp genes in the same expression host by multiplex CRISPR will lead to the mnP production reaching levels comparable to P. chrysosporium, while only requiring 36 h at 25 °C. The Lac131 activity in transgenic A. niger strain is 4- to 7-times higher than that in previous studies. Co-production of mnP and laccase in A. niger will enhance the lignin bioconversion efficiency.

Aspergillus niger↗
DOE OSTI2025

Cosmology with second- and third-order shear statistics for the Dark Energy Survey: Methods and simulated analysis

We present a new pipeline designed for the robust inference of cosmological parameters using both second- and third-order shear statistics. We build a theoretical model for rapid evaluation of three-point correlations using our fastnc code and integrate it into the cosmosis framework. We measure the two-point functions 𝜉 ± and the full configuration-dependent three-point shear correlation functions across all auto- and cross-redshift bins. We compress the three-point functions into the mass aperture statistic ⟨ℳ$^{3}_{ap}$⟩ for a set of 796 simulated shear maps designed to model the Dark Energy Survey Year 3 data. We estimate from it the full covariance matrix and model the effects of intrinsic alignments, shear calibration biases and photometric redshift uncertainties. We apply scale cuts to minimize the contamination from the baryonic signal as modeled through hydrodynamical simulations. We find a significant improvement of 83% on the figure of merit in the Ω m − 𝑆 8 plane when we add the ⟨ℳ$^{3}_{ap}$⟩ data to 𝜉 ± . Here, we present our findings for all relevant cosmological and systematic uncertainty parameters and discuss the complementarity of third-order and second-order statistics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Dark Energy Survey: DESI-independent angular BAO measurement

In this work, we present a measurement of the angular baryon acoustic oscillation (BAO) scale from the completed Dark Energy Survey (DES) dataset excluding the area of overlap with the Dark Energy Spectroscopic Instrument (DESI). We follow the same methodology and validation process as in the DES Y6 BAO analysis. We interpret the impact of this measurement in the context of the statistical preference for 𝑤 0 ⁢𝑤 𝑎 cold dark matter (CDM) over Λ⁢CDM when combined with DES Y5 Type Ia supernovae (SN), Planck CMB, and DESI BAO. Based on our previous work, using the full Y6 DES BAO sample, in combination with SN, CMB and DESI data release 1 (DR1) BAO, added 0.3⁢𝜎 in this preference (from 3.7⁢𝜎 to 4.0⁢𝜎), but this ignored possible correlations between datasets. Using our new DESI-independent DES BAO likelihood instead, we find a smaller increase in the statistical preference for 𝑤 0 ⁢𝑤 𝑎 ⁢CDM, from 3.7⁢𝜎 to 3.8⁢𝜎 when using DESI DR1 BAO, and from 4.0⁢𝜎 to 4.1⁢𝜎 when updating to the more recent DESI data release 2 (DR2) BAO. These significances reduce to 3.1⁢𝜎 when using the new calibrated DES SN-Dovekie. Alongside this work, we publicly release baofit_wtheta, the BAO fitting code for the angular correlation function used in the DES Y6 BAO analysis.

79 ASTRONOMY AND ASTROPHYSICS↗