Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ULTRAVIOLET RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Bandgap engineering in amorphous Be{sub x}Zn{sub y}O thin films

Reactive sputtering was used to grow thin films of Be{sub x}Zn{sub y}O on Si (100) substrates. X-ray diffraction patterns of the films revealed no structure, suggesting that the films have an amorphous nature. The optical ''bandgap'' energy of the amorphous Be{sub x}Zn{sub y}O (a-Be{sub x}Zn{sub y}O) films was derived from vacuum ultraviolet variable angle spectroscopic ellipsometry measurements. The value of the energy bandgap of the films can be efficiently engineered to vary from the amorphous ZnO bandgap of 3.35 to 7.91 eV by changing the Be doping level in the a-BeZnO. The a-BeZnO films could be used for fabricating excellent a-ZnO based electronic devices.

36 MATERIALS SCIENCE↗

Origin of color centers in the flux-grown europium gallium garnet

Europium gallium garnet (EuGG) single crystals were grown from fluxes with various contents. Optical absorption spectra of EuGG grown from a flux containing calcium show an additional band in the ultraviolet and blue regions of the spectra as compared to the case of a calcium-free flux. Moessbauer spectra of the samples grown from the fluxes with different additives show no signs of other valence states of the europium ions except for 3+. However, they indicate changes in the crystal field due to the entrance of additive ions. The nature of the additional absorption must be the same as that for calcium-doped gadolinium gallium garnet, i.e., anion vacancies. Moessbauer isotope shifts and quadrupole splitting for EuGG are determined.

36 MATERIALS SCIENCE↗

The influence of nitrogen plasma treatment on the lattice vibrational properties of hydrothermally grown ZnO nanorods

In this study, the authors have investigated the optical properties of hydrothermally grown ZnO nanorods subjected to the combination of thermal annealing and nitrogen plasma treatments. In particular, ultraviolet-visible micro-Raman scattering has been used to study the influence of nitrogen incorporation in ZnO nanorods grown on GaN/sapphire templates. The band-edge photoluminescence spectra show significant changes due to nitrogen plasma treatment. In addition, visible Raman spectra show intensity enhancement of the disorder-activated vibrational modes from plasma-treated ZnO nanorods. Multiple longitudinal optical (LO) phonons are observed under ultraviolet resonant Raman excitation from these nanorods. The first-order resonant LO phonon line shape fitting is correlated to the nitrogen-induced lattice disorder.

36 MATERIALS SCIENCE↗

Infrared absorption spectra of vinyl radicals isolated in solid Ne

Irradiation of samples of solid Ne near 3.0 K containing ethene (C{sub 2}H{sub 4}) with vacuum ultraviolet radiation at 120 nm from synchrotron yielded new spectral lines at 3141.0, 2953.6, 2911.5, 1357.4, 677.1, 895.3, and 857.0 cm{sup -1}. These features are assigned to {alpha}-CH stretching ({nu}{sub 1}), CH{sub 2} antisymmetric stretching ({nu}{sub 2}), CH{sub 2} symmetric stretching ({nu}{sub 3}), CH{sub 2}-bending ({nu}{sub 5}), HCCH cis bending ({nu}{sub 7}), CH{sub 2} out-of-plane bending ({nu}{sub 8}), and {alpha}-CH out-of-plane bending ({nu}{sub 9}) modes of C{sub 2}H{sub 3}, respectively, based on results of {sup 13}C- and D-isotopic experiments and quantum-chemical calculations. These calculations using density-functional theory (B3LYP and PW91PW91/aug-cc-pVTZ) predict vibrational wavenumbers, IR intensities, and isotopic ratios of vinyl radical that agree satisfactorily with our experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implantation conditions for diamond nanocrystal formation in amorphous silica

We present a study of carbon ion implantation in amorphous silica, which, followed by annealing in a hydrogen-rich environment, leads to preferential formation of carbon nanocrystals with cubic diamond (c-diamond), face-centered cubic (n-diamond), or simple cubic (i-carbon) carbon crystal lattices. Two different annealing treatments were used: furnace annealing for 1 h and rapid thermal annealing for a brief period, which enables monitoring of early nucleation events. The influence of implanted dose and annealing type on carbon and hydrogen concentrations, clustering, and bonding were investigated. Rutherford backscattering, elastic recoil detection analysis, infrared spectroscopy, transmission electron microscopy, selected area electron diffraction, ultraviolet-visible absorption measurements, and Raman spectroscopy were used to study these carbon formations. These results, combined with the results of previous investigations on similar systems, show that preferential formation of different carbon phases (diamond, n-diamond, or i-carbon) depends on implantation energy, implantation dose, and annealing conditions. Diamond nanocrystals formed at a relatively low carbon volume density are achieved by deeper implantation and/or lower implanted dose. Higher volume densities led to n-diamond and finally to i-carbon crystal formation. This observed behavior is related to damage sites induced by implantation. The optical properties of different carbon nanocrystal phases were significantly different.

36 MATERIALS SCIENCE↗

Femtosecond laser blackening of platinum

Using a femtosecond laser processing technique, we produce the black platinum with absorptance of about 95% over a broad wavelength range from ultraviolet to infrared. From scanning electron microscopy and energy dispersive x-ray spectroscopy studies, we find that the enhanced absorption of the black metal is due to a variety of nano- and microscale surface structures. Using a unique calorimetry technique, we perform a shot-to-shot comparison study of the metal absorption change in air and vacuum. Our study shows that the blackening process for platinum is more efficient in vacuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of electron-beam irradiation on conducting polypyrrole nanowires

Conducting polypyrrole (PPy) nanowires (NWs) were irradiated by a relatively high energy (300 keV-2 MeV) electron-beam (e-beam) generated from a linear electron accelerator in an atmospheric environment. From the current-voltage characteristics of pristine and 2 MeV e-beam irradiated PPy NWs, we observed a dramatic variation in resistance from 8.0x10{sup 2} to 1.45x10{sup 8} {omega}, that is, we observed a transition from conducting states to nonconducting states through the e-beam irradiation. To discern conformational changes and the doping states of PPy NWs through the e-beam irradiation, we measured Raman and ultraviolet-visible absorption spectra for the PPy NWs. As the energy of the e-beam irradiation increased, we observed that the PPy NWs were changed from doping states to dedoping states with conformational modification including the variation in {pi}-conjugation length.

36 MATERIALS SCIENCE↗

Robust room temperature persistent photoconductivity in polycrystalline indium oxide films

We have investigated the effects of UV irradiation on the electrical and optical properties of polycrystalline In{sub 2}O{sub 3} films. We found that UV illumination at a peak wavelength of 365 nm leads to a sharp drop in resistance and increase in carrier concentration. This highly conductive state persists for a timescale of hours in air at room temperature after illumination. We observe distinct changes in the optical absorption spectra and the associated change in carrier concentration, which is consistent with a Burstein-Moss shift of {approx}0.1 eV. The relaxation rate of this persistent conducting state depends strongly on temperature. We find that the conductance relaxation in an oxygen-free environment can be described by a stretched exponential while the behavior of the samples in air is better described by a logarithmic relaxation, both of which may be associated with glassy behavior.

36 MATERIALS SCIENCE↗

Demonstration of Flying Mirror with Improved Efficiency

A strongly nonlinear wake wave driven by an intense laser pulse can act as a partially reflecting relativistic mirror (the flying mirror)[S. V. Bulanov, et al., Bulletin of the Lebedev Physics Institute, No. 6, 9 (1991); S. V. Bulanov, et al., Phys. Rev. Lett. 91, 085001 (2003)]. Upon reflection from such mirror, a counter-propagating optical-frequency laser pulse is directly converted into high-frequency radiation, with a frequency multiplication factor approx4gamma{sup 2}(the double Doppler effect). We present the results of recent experiment in which the photon number in the reflected radiation was at least several thousand times larger than in our proof-of-principle experiment [M. Kando, et al., Phys. Rev. Lett. 99, 135001 (2007); A. S. Pirozhkov, et al., Phys. Plasmas 14, 123106 (2007)]. The flying mirror holds promise of generating intense coherent ultrashort XUV and x-ray pulses that inherit their temporal shape and polarization from the original optical-frequency (laser) pulses. Furthermore, the reflected radiation bears important information about the reflecting wake wave itself, which can be used for its diagnostics.

07 ISOTOPE AND RADIATION SOURCES↗

Photon Science at Modern Light Sources

More than 50 large x-ray and UV light sources based on high-energy electron accelerators are in operation around the world, serving a scientific community numbering in the tens of thousands. These sources generate synchrotron radiation from accelerated electrons or positrons. The development of synchrotron light sources over the last 40 years has fueled an exponential increase in x-ray source brightness of more than 10 orders of magnitude. The next large advance in source potential is now underway, with the commissioning of the first x-ray Free-Electron Laser (FEL) sources. Using high-energy electron linear accelerators, these facilities produce sub-picosecond pulses of hard x-rays with peak brightness more than 10 orders of magnitude greater than current synchrotron facilities. FEL x-ray facilities will soon be operational in the US, Japan, and Germany.Research at modern light sources makes use of a wide range of experimental techniques. Many experiments are designed to study the structure of matter at the atomic scale using elastic x-ray scattering. This technique has been particularly effective for determining the structures of biological molecules, such as proteins, viruses, and drugs. Inelastic x-ray scattering, or x-ray absorption followed by emission of electrons or photons, can give information about the electronic structures of atoms, which can be used to deduce local environment information such as atomic species, bonding state, geometry of neighboring atoms, or magnetic state. For some techniques involving x-ray emission from a sample, cryogenic detectors with energy resolution at the {approx}10 eV level or better would be very helpful. Shifts in electron energy levels associated with bonding states and magnetic states are typically several eV, while the energy structure associated with Compton inelastic scattering is typically in the range of a few tens of eV. Current energy-resolving detectors used at synchrotron light sources are hampered by either poor energy resolution ({approx}100 eV for solid state detectors), or very poor angular acceptance (10{sup -3} sr or worse for grating and crystal analyzer detectors).Photon detectors at synchrotron light sources can be presented with very high signal count rates. At the new FEL sources, this issue will be especially acute, since each sub-picosecond pulse will deliver the flux produced in one second by a synchrotron. This invites the use of multiple small detectors to spread the load. The ideal energy-resolving detector for x-ray science at modern light sources would combine eV-level energy resolution, 100-{mu}m pixel size, and a low per-pixel cost allowing several megapixels to be deployed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Silicon structuring by etching with liquid chlorine and fluorine precursors using femtosecond laser pulses

The aim of this study is to investigate the micrometer and submicrometer scale structuring of silicon by liquid chlorine and fluorine precursors with 200 fs laser pulses working at both fundamental (775 nm) and frequency doubled (387 nm) wavelengths. The silicon surface was irradiated at normal incidence by immersing the Si (111) substrates in a glass container filled with liquid chlorine (CCl{sub 4}) and fluorine (C{sub 2}Cl{sub 3}F{sub 3}) precursors. We report that silicon surfaces develop an array of spikes with single step irradiation processes at 775 nm and equally at 387 nm. When irradiating the Si surface with 400 pulses at 330 mJ/cm{sup 2} laser fluence and a 775 nm wavelength, the average height of the formed Si spikes in the case of fluorine precursors is 4.2 {mu}m, with a full width at half maximum of 890 nm. At the same irradiation wavelength chlorine precursors develop Si spikes 4 {mu}m in height and with a full width at half maximum of 2.3 {mu}m with irradiation of 700 pulses at 560 mJ/cm{sup 2} laser fluence. Well ordered areas of submicrometer spikes with an average height of about 500 nm and a width of 300 nm have been created by irradiation at 387 nm by chlorine precursors, whereas the fluorine precursors fabricate spikes with an average height of 700 nm and a width of about 200 nm. Atomic force microscopy and scanning electron microscopy of the surface show that the formation of the micrometer and sub-micrometer spikes involves a combination of capillary waves on the molten silicon surface and laser-induced etching of silicon, at both 775 nm and 387 nm wavelength irradiation. The energy-dispersive x-ray measurements indicate the presence of chlorine and fluorine precursors on the structured surface. The fluorine precursors create a more ordered area of Si spikes at both micrometer and sub-micrometer scales. The potential use of patterned Si substrates with gradient topography as model scaffolds for the systematic exploration of the role of 3D micro/nano morphology on cell adhesion and growth is envisaged.

36 MATERIALS SCIENCE↗

Effects of ultraviolet photon irradiation on the transition metal impurities in LaAlO{sub 3}

By measuring electron spin resonance (ESR) spectra at the X-band frequency and absorption spectra from the visible to ultraviolet region at room temperature, it was confirmed that perovskite single crystal LaAlO{sub 3} contains Cr and Fe as impurities. When LaAlO{sub 3} is exposed to photons with energies higher than 4.5 eV, the intensities of ESR signals due to Cr{sup 3+} and Fe{sup 3+} decrease, which indicates that electrons released by the photon irradiation are captured by Cr{sup 3+} and Fe{sup 3+}. Concurrently with this, a broad optical absorption band at about 3.0 eV and two new broad and weak ESR signals appear. The former is attributable to a combination of a hole and a La{sup 3+} (or Al{sup 3+}) vacancy, and the two weak ESR signals are assigned to the O{sup -} center and F{sup +} center.

36 MATERIALS SCIENCE↗

Tailored Modification of Plasma Polymerized Nanoparticles

Reactive plasmas are an excellent source for dust particles with different characteristics. In the work presented herein the nanoparticles produced in such systems were post-processed by means of annealing, VUV/x-ray irradiation, and ion bombardment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High efficiency ultraviolet emission from Al{sub x}Ga{sub 1-x}N core-shell nanowire heterostructures grown on Si (111) by molecular beam epitaxy

High crystalline quality, vertically aligned Al{sub x}Ga{sub 1-x}N nanowire heterostructures are grown on GaN nanowire templates on Si (111) substrates by plasma-assisted molecular beam epitaxy. The nanowires exhibit unique core-shell structures, with enhanced Al compositions in the near-surface region. The emission wavelength can be varied across nearly the entire ultraviolet A ({approx}3.10-3.94 eV) and B ({approx}3.94-4.43 eV) spectral range by controlling the Al compositions. Such nanowire structures can exhibit extremely high internal quantum efficiency (up to {approx}58%) at room-temperature, which is attributed to the superior carrier confinement offered by the core-shell structures and to the use of defect-free GaN nanowire templates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Composition, nanostructure, and optical properties of silver and silver-copper lusters

Lusters are composite thin layers of coinage metal nanoparticles in glass displaying peculiar optical properties and obtained by a process involving ionic exchange, diffusion, and crystallization. In particular, the origin of the high reflectance (golden-shine) shown by those layers has been subject of some discussion. It has been attributed to either the presence of larger particles, thinner multiple layers or higher volume fraction of nanoparticles. The object of this paper is to clarify this for which a set of laboratory designed lusters are analysed by Rutherford backscattering spectroscopy, transmission electron microscopy, x-ray diffraction, and ultraviolet-visible spectroscopy. Model calculations and numerical simulations using the finite difference time domain method were also performed to evaluate the optical properties. Finally, the correlation between synthesis conditions, nanostructure, and optical properties is obtained for these materials.

36 MATERIALS SCIENCE↗

Oxalyl chloride, ClC(O)C(O)Cl: UV/vis spectrum and Cl atom photolysis quantum yields at 193, 248, and 351 nm

Oxalyl chloride, (ClCO){sub 2}, has been used as a Cl atom photolytic precursor in numerous laboratory kinetic and photochemical studies. In this study, the UV/vis absorption spectrum of (ClCO){sub 2} and the Cl atom quantum yields in its photolysis at 193, 248, and 351 nm are reported. The UV/vis spectrum was measured between 200 and 450 nm at 296 K using diode array spectroscopy in conjunction with an absolute cross section obtained at 213.9 nm. Our results are in agreement with the spectrum reported by Baklanov and Krasnoperov [J. Phys. Chem. A 105, 97-103 (2001)], which was obtained at 11 discrete wavelengths between 193.3 and 390 nm. Cl atom quantum yields, {Phi}({lambda}), were measured using pulsed laser photolysis coupled with time resolved atomic resonance fluorescence detection of Cl. The UV photolysis of (ClCO){sub 2} has been shown in previous studies to occur via an impulsive three-body dissociation mechanism, (COCl){sub 2}+ hv{yields} ClCO*+ Cl + CO (2), where the excited ClCO radical, ClCO*, either dissociates or stabilizes ClCO*{yields} Cl + CO (3a), {yields} ClCO (3b). ClCO is thermally unstable at the temperatures (253-298 K) and total pressures (13-128 Torr) used in our experiments ClCO + M {yields} Cl + CO + M (4) leading to the formation of a secondary Cl atom that was resolvable in the Cl atom temporal profiles obtained in the 248 and 351 nm photolysis of (ClCO){sub 2}. {Phi}(193 nm) was found to be 2.07 {+-} 0.37 independent of bath gas pressure (25.8-105.7 Torr, N{sub 2}), i.e., the branching ratio for channel 2a or the direct formation of 2Cl + 2CO in the photolysis of (ClCO){sub 2} is >0.95. At 248 nm, the branching ratio for channel 2a was determined to be 0.79 {+-} 0.15, while the total Cl atom yield, i.e., following the completion of reaction (4), was found to be 1.98 {+-} 0.26 independent of bath gas pressure (15-70 Torr, N{sub 2}). {Phi}(351 nm) was found to be pressure dependent between 7.8 and 122.4 Torr (He, N{sub 2}). The low-pressure limit of the total Cl atom quantum yield, {Phi}{sub 0}(351 nm), was 2.05 {+-} 0.24. As part of this work, rate coefficients for the thermal decomposition of ClCO were measured between 253 and 298 K at total pressures between 13 and 128 Torr (He and N{sub 2} bath gases). The N{sub 2} bath gas results were combined with the data reported in Nicovich et al. [J. Chem. Phys. 92, 3539-3544 (1990)] to yield k{sub 4}(T, N{sub 2}) = (4.7 {+-} 0.7) Multiplication-Sign 10{sup -10} exp [-(2987 {+-} 16)/T] cm{sup 3} molecule{sup -1} s{sup -1}, while the He bath gas data fit yielded k{sub 4}(T, He) = (2.3 {+-} 2.1) Multiplication-Sign 10{sup -10} exp [-(2886 {+-} 218)/T] cm{sup 3} molecule{sup -1} s{sup -1}. The quoted uncertainties are at the 2{sigma} level from the precision of the fit. In addition, the room temperature rate coefficient for the Cl + ClNO reaction was measured in this work to be (1.03 {+-} 0.10) Multiplication-Sign 10{sup -10} cm{sup 3} molecule{sup -1} s{sup -1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compositionally graded relaxed AlGaN buffers on semipolar GaN for mid-ultraviolet emission

In this Letter, we report on the growth and properties of relaxed, compositionally graded Al{sub x}Ga{sub 1-x}N buffer layers on freestanding semipolar (2021) GaN substrates. Continuous and step compositional grades with Al concentrations up to x = 0.61 have been achieved, with emission wavelengths in the mid-ultraviolet region as low as 265 nm. Coherency stresses were relaxed progressively throughout the grades by misfit dislocation generation via primary (basal) slip and secondary (non-basal) slip systems. Threading dislocation densities in the final layers of the grades were less than 10{sup 6}/cm{sup 2} as confirmed by plan-view transmission electron microscopy and cathodoluminescence studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular beam epitaxy-grown wurtzite MgS thin films for solar-blind ultra-violet detection

Molecular beam epitaxy grown MgS on GaAs(111)B substrate was resulted in wurtzite phase, as demonstrated by detailed structural characterizations. Phenomenological arguments were used to account for why wurtzite phase is preferred over zincblende phase or its most stable rocksalt phase. Results of photoresponse and reflectance measurements performed on wurtzite MgS photodiodes suggest a direct bandgap at around 5.1 eV. Their response peaks at 245 nm with quantum efficiency of 9.9% and enjoys rejection of more than three orders at 320 nm and close to five orders at longer wavelengths, proving the photodiodes highly competitive in solar-blind ultraviolet detection.

36 MATERIALS SCIENCE↗