Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transfer Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Process development and scale-up of value added molecules (CRADA Final Report)

In this project, a genetically modified Saccharomyces cerevisiae was used to produce Histamine via fermentation of dextrose. Zymergen provided a tech transfer document based on their 1 L studies, where they observed a titer of 0.9 g/L with this strain. The ABPDU staff performed two bench scale campaigns, with four 2 L reactors in each campaign, to carry out tech transfer and process optimization studies. Optimization was pursued by varying initial glucose concentration, feed initiation conditions, feed strategies, vitamin supplementation, inoculum size, etc. We chose a 2 L process condition, with 4% inoculum volume, continuous feed initiated after complete ethanol depletion, that yielded the most promising titers (2.41 g/L) for scale up to 300 L.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1994

An integrated optical CO2 sensor. Phase 0: Design and fabrication of critical elements

Significant progress has been made toward all of the goals for the first phase of the project short of actual fabrication of a light path. Two alternative approaches to fabricating gold mirrors using the basic LIGA process were developed, one using electroplated solid gold mirrors and the second using gold plated over a nickel base. A new method of fabrication, the transfer mask process, was developed and demonstrated. Analysis of the projected surface roughness and beam divergence effects was completed. With gold surface with low surface roughness scattering losses are expected to be insignificant. Beam divergence due to diffraction will require a modification of the original design, but should be eliminated by fabricating mirrors 1000 mu m in height by 1000 mu m in width and using a source with an initial beam radius greater than 300 mu m. This may eliminate any need for focusing optics. Since the modified design does not affect the mask layout, ordering of the mask and fabrication of the test structures can begin immediately at the start of Phase 1.

Murphy, Michael C.↗
DOE OSTI2022

Discovery of Graphene-Water Membrane Structure: Toward High-Quality Graphene Process

It is widely accepted that solid-state membranes are indispensable media for the graphene process, particularly transfer procedures. But these membranes inevitably bring contaminations and residues to the transferred graphene and consequently compromise the material quality. This study reports a newly observed free-standing graphene-water membrane structure, which replaces the conventional solid-state supporting media with liquid film to sustain the graphene integrity and continuity. Experimental observation, theoretical model, and molecular dynamics simulations consistently indicate that the high surface tension of pure water and its large contact angle with graphene are essential factors for forming such a membrane structure. More interestingly, water surface tension ensures the flatness of graphene layers and renders high transfer quality on many types of target substrates. This report enriches the understanding of the interactions on reduced dimensional material while rendering an alternative approach for scalable layered material processing with ensured quality for advanced manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Process-informed adsorbent design guidelines for direct air capture

Direct air capture using solid adsorbents is a proven technology critical to reducing our net greenhouse gas emissions to zero and beyond. Currently, academic research into the technology mainly focuses on the development of new adsorbents. However, there is a discord between the adsorbent design and process performance. Many materials scientists focus on maximising metrics such as the CO 2 capacity of their adsorbent. Here, we combine detailed process modelling, machine learning, and extensive global sensitivity analysis, which entails varying all of the model parameters together, on a direct air capture process to show that the dry CO 2 adsorption capacity does not influence process performance for an amine-functionalised adsorbent operating in a temperature vacuum swing adsorption (TVSA) process, while it is important in a steam-assisted TVSA (S-TVSA) process. In fact, adsorption kinetics, density, and thermal conductivity are all critical attributes to obtaining a low energy penalty and reduced costs. The analysis also highlights the importance of heat transfer, directing process engineers to (alternative) adsorber designs that maximise this. By an in-depth evaluation of how process performance indicators are affected by materials properties and process operating parameters, this work provides guidance to both material scientists and process engineers towards the design of a “unicorn adsorbent” and intensified DAC processes. This will improve the performance of solid adsorbent direct air capture and help drive down the costs of this vital technology to avert the worst impacts of climate change.

42 ENGINEERING↗
NASA NTRS2019

Training, Retention, and Transfer of Data Entry Perceptual and Motor Processes Over Short and Long Retention Intervals

In 2 experiments, subjects trained in a standard data entry task, which involved typing numbers (e.g., 2147) using their right hands. At an initial test (20 min or 6 months after training), subjects completed the standard task, followed by a left-hand variant (typing with their left hands) that involved the same perceptual, but different motoric, processes as the standard task. At a second test (2 days or 8 months after training), subjects completed the standard task, followed by a code variant (translating letters into digits, then typing the digits with their right hands) that involved different perceptual, but the same motoric, processes as the standard task. At test, for each of the three tasks, half the trials were trained numbers (old) and half were new. Repetition priming (faster response times to old than new numbers) was found for each task, with extended delays only slightly decreasing the magnitude of the effect. Repetition priming for the standard task reflects retention of trained numbers, for the left-hand variant reflects transfer of perceptual processes, and for the code variant reflects transfer of motoric processes. There was, thus, evidence for both specificity and generalizability of training data entry perceptual and motoric processes even over very long retention intervals.

transfer↗
NASA NTRS2017

Training, Retention, and Transfer of Data Entry Perceptual and Motoric Processes Over Long Retention Intervals

Subjects trained in a standard data entry task, which involved typing numbers (e.g., 5421) using their right hands. At test (6 months post-training), subjects completed the standard task, followed by a left-hand variant (typing with their left hands) that involved the same perceptual, but different motoric, processes as the standard task. At a second test (8 months post-training), subjects completed the standard task, followed by a code variant (translating letters into digits, then typing the digits with their right hands) that involved different perceptual, but the same motoric, processes as the standard task. For each of the three tasks, half the trials were trained numbers (old) and half were new. Repetition priming (faster response times to old than new numbers) was found for each task. Repetition priming for the standard task reflects retention of trained numbers; for the left-hand variant reflects transfer of perceptual processes; and for the code variant reflects transfer of motoric processes. There was thus evidence for both specificity and generalizability of training data entry perceptual and motoric processes over very long retention intervals.

dat↗
DOE OSTI2022

Lignin to liquid fuels and polyols using biomass-derived solvents

A process of producing a distillate fuel from lignin includes: preparing a biomass-derived lignin solvent; dissolving the lignin in the biomass-derived solvent; and separating undissolved lignin and mineral matter to produce a syncrude. In certain embodiments, the process further includes subjecting the syncrude to a hydrotreatment/hydrogenation process to produce a distillate fuel. A process to improve direct lignin liquefaction includes: using a non-hydrogenated lipid in a direct lignin liquefaction process to facilitate lignin depolymerization. A process for using a biomass-derived feedstock as a hydrogen donor includes: providing a biomass-derived feedstock; modifying the feedstock to improve its usefulness as a hydrogen donor; and conducting a transfer hydrogenation process using the modified feedstock as a hydrogen donor.

Chauhan, Satya P.↗
DOE OSTI2023

Electrolytic Etching of Germanium Substrates with Hydrogen Peroxide

Anodic electrolytic etching of germanium has been performed in hydrogen peroxide etchants with controlled external conditions. In-situ current and ex-situ etch-depths were measured and tracked with respect to etchant composition and stir rates. Gas bubbles formed during the etching process were found to cause non-uniformity in etch-current and surface quality. The effects were minimized in specific composition spaces. Quantitative analysis revealed a linear correlation of the number of electrons transferred during germanium oxidation with the number of surface atoms removed. Experimental results of 2.77 electrons/atom deviate significantly from 4 electrons/atom previously reported for silicon. The conclusion is that etching mechanisms for germanium are sufficiently different from those for silicon which invalidates the direct transfer of processing techniques between the two materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Twisted MoSe 2 Homobilayer Behaving as a Heterobilayer

Heterostructures (HSs) formed by the transition-metal dichalcogenides materials have shown great promise in next-generation (opto)electronic applications. An artificially twisted HS, allows us to manipulate the optical, and electronic properties. In this work, we introduce the understanding of the energy transfer (ET) process governed by the dipolar interaction in a twisted molybdenum diselenide (MoSe 2 ) homobilayer without any charge-blocking interlayer. We fabricated an unconventional homobilayer (i.e., HS) with a large twist angle by combining the 2 chemical vapor deposition (CVD) and mechanical exfoliation (Exf.) techniques to fully exploit the lattice parameters mismatch and indirect/direct (CVD/Exf.) bandgap nature. These effectively weaken the interlayer charge transfer and allow the ET to control the carrier recombination channels. Our experimental and theoretical results explain a massive HS photoluminescence enhancement due to an efficient ET process. This work shows that the electronically decoupled MoSe 2 homobilayer is coupled by the ET process, mimicking a 'true' heterobilayer nature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quenching of single-particle strength inferred from nucleon-removal transfer reactions on 15 C

The difference in the proton and neutron separation energies (ΔS) of the weakly bound 15 C ground state is -19.86 MeV, an extreme value. Data from intermediate-energy heavy-ion induced (HI-induced) knockout reactions on nuclei spanning -20 ≲ ΔS ≲ +20 MeV, suggest that the degree to which single-particle strength is quenched, R s , has a negative correlation with ΔS, decreasing from unity around -20 MeV to around 0.2 at +20 MeV. For the 15 C ground state (R s = 0.96 (4) in HI-induced knockout), contrasting results have recently been obtained via the neutron-adding transfer reaction, which reveal a value of R s = 0.64 (15), similar to the value observed at modest and more extreme values of ΔS with reaction probes other than HI knockout. In order to explore the any potential differences between adding and removing processes in transfer reactions at extreme ΔS, single-neutron removal transfer reactions on 15 C were performed at 7.1 MeV/u in inverse kinematics. The removal of a valence neutron in 2s 1/2 orbit using both (p, d) and (d, t) reactions shows consistent quenching factors and agrees with those from the neutron-adding reaction. The present results, which can be compared with neutron knockout reaction, suggest that correlations, represented by the quenching factor, show limited dependence on neutron-proton asymmetry under the most extreme asymmetry conditions so far achieved in transfer reactions.

quenching factor↗
DOE OSTI2026

Diabatization with Electrostatic Embedding for Studying Photophysics in Organic Molecular Crystals

Highly emissive organic molecular crystals find applications in several areas, such as organic electronics, solar cells, and sensors. Understanding the excited-state mechanisms underlying these applications is essential for optimizing and controlling them effectively. Exciton models coupled with nonadiabatic dynamics, particularly quantum dynamics, provide crucial insights into photochemical and photophysical processes in molecular crystals. Nevertheless, there remains a lack of general tools and automated workflows to facilitate such simulations. In this paper, we present a computational strategy to investigate the photoactivated dynamics of organic molecular crystals, bridging methodologies traditionally used for molecular systems and materials science, with a particular focus on the interplay between local excitations and charge transfer (CT) processes. We have implemented an interface between the fromage and Overdia programs, enabling the construction of vibronic Hamiltonians for molecular crystals within an excited-state ONIOM(QM:QM′) framework, incorporating long-range electrostatics through a RESP-based Ewald summation. Fragment-based diabatization provides a route to quantum dynamics simulations in weak-to-intermediate coupling regimes. The method was applied to the photophysics of dibenzo[g,p]chrysene (DBC) crystals using time-dependent DFT. The fromage/ Overdia interface was employed to compute the couplings of local excitations and CT states for 18 unique DBC dimers in the crystal and to quantify the influence of electrostatic embedding, which was found to be modest (10−20%). Simulations on π-stacked dimers reproduced the small red shift observed experimentally from solution to crystal, attributed to electronic interactions among fixed monomers rather than crystal electrostatics. Quantum dynamics simulations revealed ultrafast population transfer from bright local excitations to CT states. This approach establishes a robust framework linking molecular and solid-state excited-state dynamics, with potential applications for studying excitations, defects, and impurities in molecular crystals.

Crystals↗
DOE OSTI2021

The fluorescence quantum yield parameter in Förster resonance energy transfer (FRET)—Meaning, misperception, and molecular design

The fluorescence quantum yield parameter in Förster resonance energy transfer (FRET) processes underpins vital phenomena ranging from light harvesting in photosynthesis to design of sensors for monitoring physiological processes. The criteria for choosing a donor for use in FRET processes include chemical features (solubility, bioconjugatability, synthetic accessibility, and stability) as well as photophysical properties pertaining to absorption (wavelength and molar absorption coefficient) and fluorescence (wavelength and fluorescence quantum yield). The value of the donor fluorescence quantum yield (Φf, or emphatically, Φf(D)) alone has sometimes been thought (erroneously) to place a ceiling on the possible quantum yield of energy transfer (Φtrans). A high value of the donor Φf, while attractive, is not at all essential; indeed, many valuable candidates for use as FRET donors have likely been excluded on the basis of this injudiciously applied filter. Such disregard is unwarranted. In this tutorial overview, the equations for FRET are reviewed along with pertinent core concepts in photophysics. An analogy using simple hydraulics provides a pedagogical tool for the non-aficionado to better understand photochemical kinetics. Ten examples are presented of donor–acceptor systems with donors that exhibit a range of Φf values (0.60, 0.59. 0.21, 0.17, 0.12, 0.118, 0.04, 0.018, 0.007, and 0.003; i.e., 60%–0.3%), yet for each corresponding donor–acceptor pair, the value of Φtrans is at least 0.70 and in some cases nearly 1.00 (i.e., 70%–100%). The systems encompass protein, synthetic inorganic, and synthetic organic architectures. The objectives of this illustrative review are to deepen understanding of FRET and to broaden molecular design considerations by enabling selection from among a far richer set of donors for use in FRET processes.

Lindsey, Jonathan S. (ORCID:0000000248722040)↗
DOE OSTI2024

High-Resolution Frequency-Domain Spectroscopic and Modeling Studies of Photosystem I (PSI), PSI Mutants and PSI Supercomplexes

Photosystem I (PSI) is one of the two main pigment–protein complexes where the primary steps of oxygenic photosynthesis take place. This review describes low-temperature frequency-domain experiments (absorption, emission, circular dichroism, resonant and non-resonant hole-burned spectra) and modeling efforts reported for PSI in recent years. In particular, we focus on the spectral hole-burning studies, which are not as common in photosynthesis research as the time-domain spectroscopies. Experimental and modeling data obtained for trimeric cyanobacterial Photosystem I (PSI 3 ), PSI 3 mutants, and PSI 3 –IsiA 18 supercomplexes are analyzed to provide a more comprehensive understanding of their excitonic structure and excitation energy transfer (EET) processes. Detailed information on the excitonic structure of photosynthetic complexes is essential to determine the structure–function relationship. We will focus on the so-called “red antenna states” of cyanobacterial PSI, as these states play an important role in photochemical processes and EET pathways. The high-resolution data and modeling studies presented here provide additional information on the energetics of the lowest energy states and their chlorophyll (Chl) compositions, as well as the EET pathways and how they are altered by mutations. We present evidence that the low-energy traps observed in PSI are excitonically coupled states with significant charge-transfer (CT) character. The analysis presented for various optical spectra of PSI 3 and PSI 3 -IsiA 18 supercomplexes allowed us to make inferences about EET from the IsiA 18 ring to the PSI 3 core and demonstrate that the number of entry points varies between sample preparations studied by different groups. In our most recent samples, there most likely are three entry points for EET from the IsiA 18 ring per the PSI core monomer, with two of these entry points likely being located next to each other. Therefore, there are nine entry points from the IsiA 18 ring to the PSI 3 trimer. We anticipate that the data discussed below will stimulate further research in this area, providing even more insight into the structure-based models of these important cyanobacterial photosystems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Excitation-Dependent High-Lying Excitonic Exchange via Interlayer Energy Transfer from Lower - to - Higher Bandgap 2D Material

High light absorption (~15%) and strong photoluminescence (PL) emission in monolayer (1L) transition metal dichalcogenides (TMDs) make them ideal candidates for optoelectronic device applications. Competing interlayer charge transfer (CT) and energy transfer (ET) processes control the photocarrier relaxation pathways in TMD heterostructures (HSs). In TMDs, long-distance ET can survive up to several tens of nm, unlike the CT process. Our experiment shows that an efficient ET occurs from the 1Ls WSe 2 -to-MoS 2 with an interlayer hexagonal boron nitride (hBN), due to the resonant overlapping of the high-lying excitonic states between the two TMDs, resulting in enhanced HS MoS 2 PL emission. This type of unconventional ET from the lower-to-higher optical bandgap material is not typical in the TMD HSs. With increasing temperature, the ET process becomes weaker due to the increased electron–phonon scattering, destroying the enhanced MoS 2 emission. Our work provides new insight into the long-distance ET process and its effect on the photocarrier relaxation pathways.

2D material↗
DOE OSTI2021

A stochastic scan strategy for grain structure control in complex geometries using electron beam powder bed fusion

Spatial control of microstructure within a three-dimensional component has been a dream of materials scientists for centuries. However, limitations in traditional manufacturing processes prevent detailed control over the distribution of microstructures in a single part. Here, we demonstrate the ability to control grain structure and crystallographic texture during metal additive manufacturing for arbitrary cross-sections of a practical size, with profound implications for the design and optimization of next-generation products. The key to this advance is a new geometry agnostic scan path algorithm that manipulates the spatial distribution of solidification conditions. Utilizing a fundamental understanding of solidification dynamics and a model of the heat transfer during processing, we have designed this algorithm to manipulate the natural competition between epitaxial dendrite growth and grain nucleation. With this algorithm, we successfully controlled the grain structure of Ni-based superalloy IN718 in the shape of the Mona Lisa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dry etching of epitaxial InGaAs/InAlAs/InAlGaAs structures for fabrication of photonic integrated circuits

A dry etching process to transfer the pattern of a photonic integrated circuit design for high-speed laser communications is described. The laser stack under consideration is a 3.2-µm-thick InGaAs/InAlAs/InAlGaAs epitaxial structure grown by molecular beam epitaxy. The etching was performed using Cl2-based inductively-coupled-plasma and reactive-ion-etching (ICP-RIE) reactors. Four different recipes are presented in two similar ICP-RIE reactors, with special attention paid to the etched features formed with various hard mask compositions, in-situ passivations, and process temperatures. The results indicate that it is possible to produce high-aspect-ratio features with sub-micron separation on this multilayer structure. Additionally, the results of the etching highlight the tradeoffs involved with the corresponding recipes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2021

Sensing the Ocean Biological Carbon Pump from Space: A Review of Capabilities, Concepts, Research Gaps and Future Developments

The element carbon plays a central role in climate and life on Earth. It is capable of moving among the geosphere, cryosphere, atmosphere, biosphere and hydrosphere. This flow of carbon is referred to as the Earth's carbon cycle. It is also intimately linked to the cycling of other elements and compounds. The ocean plays a fundamental role in Earth's carbon cycle, helping to regulate atmospheric CO2 concentration. The ocean biological carbon pump (OBCP), defined as a set of processes that transfer organic carbon from the surface to the deep ocean, is at the heart of the ocean carbon cycle. Monitoring the OBCP is critical to understanding how the Earth's carbon cycle is changing. At present, satellite remote sensing is the only tool available for viewing the entire surface ocean at high temporal and spatial scales. In this paper, we review methods for monitoring the OBCP with a focus on satellites. We begin by providing an overview of the OBCP, defining and describing the pools of carbon in the ocean, and the processes controlling fluxes of carbon between the pools, from the surface to the deep ocean, and among ocean, land and atmosphere. We then examine how field measurements, from ship and autonomous platforms, complement satellite observations, provide validation points for satellite products and lead to a more complete view of the OBCP than would be possible from satellite observations alone. A thorough analysis is then provided on methods used for monitoring the OBCP from satellite platforms, covering current capabilities, concepts and gaps, and the requirement for uncertainties in satellite products. We finish by discussing the potential for producing a satellite-based carbon budget for the oceans, the advantages of integrating satellite-based observations with ecosystem models and field measurements, and future opportunities in space, all with a view towards bringing satellite observations into the limelight of ocean carbon research.

Robert J. W. Brewin↗
DOE OSTI2025

Numerical and experimental analysis of mechanically induced failure in electric vehicle battery modules

Mitigating thermal runaway and cell-to-cell propagation is essential for improving the safety of electric and hybrid vehicles. Enhancing digital twin capabilities to predict battery mechanical abuse is particularly critical for automotive and aerospace applications, where crashworthiness is a key concern. Understanding failure conditions and propagation in battery modules during mechanical abuse is complex due to interactions between structural deformation, heat transfer, electrochemical processes, exothermic reactions and mechanical fracture. While prior studies have focused on modeling cell-level behavior, extending these models to module or pack level is necessary for a system level understating of electric vehicle safety. This study develops coupled large deformation finite element models that simultaneously solve for electrochemistry, material failure, internal short circuit and thermal runaway propagation. The models account for mechanical and thermal interactions between lithium-ion cells and other battery components while the contact interfaces are evolving with time. Model-predicted voltage, temperature and force responses are compared with experimental data for validation. The results demonstrate that the approach captures key failure mechanisms, including thermal propagation through heat transfer, electrical propagation from short circuits in parallel-connected cells, and mechanical propagation via penetration and crack formation. These findings show that computational models are valuable tools for understanding battery module failure and providing insight that can reduce the need for extensive experimental testing.

25 ENERGY STORAGE↗