SEARCH · Engineering Papers

Results for “Shaped Charges”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1975

On the distortion of the Jovian magnetic field R greater than about 40 Jovian radii as deduced from charged particle studies

The relationship between the rotation of Jupiter's magnetic field and time variations in the intensity of nearly 6 to 30 MeV electrons observed by Pioneer 10 in the outer regions of Jupiter's magnetosphere is considered. The 6-30 MeV electron flux showed regular intensity variations with a period of approximately 10 hours. The behavior of this energetic electron flux is found to be most consistent with confinement of particles to a magnetic equatorial plane which is considerably distorted from the shape expected for rigid corotation of the magnetic field with Jupiter. The distortion is likely to arise from stresses resulting from interaction of the magnetosphere with the solar wind and from inertial effects of the magnetospheric plasma.

Mckibben, R. B.↗

DOE OSTI2025

Electrical transport and torque magnetometry studies of the kagome compound LuV 6 ⁢Sn 6 under high magnetic fields

We present a comprehensive investigation of the kagome metal LuV 6 ⁢Sn 6 through magnetotransport and torque magnetometry studies in magnetic fields up to 41 T and temperatures as low as 0.3 K. Magnetoresistance measurements up to 31 T reveal clear Shubnikov–de Haas (SdH) oscillations with two dominant frequency peaks: 𝐹 𝛼 =12 T and 𝐹 𝛽 =155 T. The Berry phase Φ 𝐁 , calculated from Landau level fan diagrams, indicates a nontrivial topology for both the 𝛼- and 𝛽-orbits. To explore the possibility of higher-frequency signals in LuV 6 ⁢Sn 6 , we employed another technique: torque magnetometry. Torque measured with applied fields up to 41 T reveals clear de Haas–van Alphen (dHvA) oscillations, with frequency signals as high as 10 kT. Angular and temperature-dependent quantum oscillation measurements allowed us to extract the effective mass of charge carriers and map the Fermi surface of LuV 6 ⁢Sn 6 . To complement the experimental findings, we performed electronic band structure and Fermi surface calculations. The electronic bands of LuV 6 ⁢Sn 6 reveal intriguing features, including flat bands, van Hove singularities, and Dirac points near the Fermi level. Two bands cross the Fermi level, contributing a deformed cylindrical shape at the Γ-point and small chainlike Fermi surfaces near the Brillouin zone boundaries. Theoretical quantum oscillation frequencies derived from Fermi surface cross-sectional areas align well with experimental SdH and dHvA results. These combined experimental and theoretical insights provide a deeper understanding of the electronic structure of LuV 6 ⁢Sn 6 and establish the foundation for exploring electronic properties in other vanadium- and titanium-based kagome systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Magnesium ions mitigate metastable states in the regulatory landscape of mRNA elements

Residing in the 5' untranslated region of the mRNA, the 2'-deoxyguanosine (2'-dG) riboswitch mRNA element adopts an alternative structure upon binding of the 2'-dG molecule, which terminates transcription. RNA conformations are generally strongly affected by positively charged metal ions (especially Mg 2+ ). We have quantitatively explored the combined effect of ligand (2'-dG) and Mg 2+ binding on the energy landscape of the aptamer domain of the 2'-dG riboswitch with both explicit solvent all-atom molecular dynamics simulations (99 μsec aggregate sampling for the study) and selective 2'-hydroxyl acylation analyzed by primer extension (SHAPE) experiments. We show that both ligand and Mg 2+ are required for the stabilization of the aptamer domain; however, the two factors act with different modalities. The addition of Mg 2+ remodels the energy landscape and reduces its frustration by the formation of additional contacts. In contrast, the binding of 2'-dG eliminates the metastable states by nucleating a compact core for the aptamer domain. Mg 2+ ions and ligand binding are required to stabilize the least stable helix, P1 (which needs to unfold to activate the transcription platform), and the riboswitch core formed by the backbone of the P2 and P3 helices. Mg 2+ and ligand also facilitate a more compact structure in the three-way junction region.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1971

Nonlinear, nonlaminar-3D computation of electron motion through the output cavity of a klystron

The equations of motion used in the computation are discussed along with the space charge fields and the integration process. The following assumptions were used as a basis for the computation: (1) The beam is divided into N axisymmetric discs of equal charge and each disc into R rings of equal charge. (2) The velocity of each disc, its phase with respect to the gap voltage, and its radius at a specified position in the drift tunnel prior to the interaction gap is known from available large signal one dimensional programs. (3) The fringing rf fields are computed from exact analytical expressions derived from the wave equation assuming a known field shape between the tunnel tips at a radius a. (4) The beam is focused by an axisymmetric magnetic field. Both components of B, that is B sub z and B sub r, are taken into account. (5) Since this integration does not start at the cathode but rather further down the stream prior to entering the output cavity it is assumed that each electron moved along a laminar path from the cathode to the start of integration.

Albers, L. U.↗

NASA NTRS1977

Surface micro-discharges on spacecraft dielectrics

Extensive measurements on Teflon and Kapton in a scanning electron microscope indicate the existence of a well-defined family of surface micro-discharges characteristic of the dielectric material. For a given small region exposed to the 16-20 kV electron beam, the strongest discharge pulses are similar in shape and amplitude. For Teflon, typical pulse durations are 2-3 ns, rise and fall times are sometimes as low as 0.2 ns, current amplitudes are approximately 100 mA flowing down to the pedestal and the pulses are unidirectional with no ringing. The use of a rapid-scan electron microscope with a secondary-electron imaging system reveals complex charge distributions resembling Lichtenberg figures on a supposedly flat homogeneous dielectric surface. These patterns undergo extensive alteration at each micro-discharge pulse and indicate that both the charging and discharging processes are highly nonuniform over the dielectric surface. The use of floodbeam causes the occurrence of a large-scale macro-discharges, in which a typical peak current is 40 A with a duration of 120 ns.

Balmain, K. G.↗

NASA NTRS1993

SCATHA mission termination report

The SCATHA (Spacecraft Charging at High Altitudes) satellite was operated from the Consolidated Space Test Center in Sunnyvale, California from February 1979 to May 1991. It was a spin stabilized vehicle in a highly eccentric orbit that collected data on spacecraft charging. The purpose of such data gathering was to predict and/or model the effects of the Earth's magnetic field on synchronous and near synchronous satellites. During the majority of its lifetime, attitude precession maneuvers were done every 10-15 days to maintain solar panel orientation. Maneuver planning was difficult due to the structural characteristics of SCATHA. It is cylindrically shaped and has seven booms ranging in length from 2 to 50 meters. These precession maneuvers induced predictable nutation that damped out after a few days. Eventually fuel began running low due to these frequent maneuvers. Experiments that had required the spin axis be in the orbit plane had already been turned off or had collected all their data. To increase the vehicle lifetime, the spin axis was moved to ecliptic normal. While this stopped the need for frequent attitude maneuvering (only two per year required now), this movement of the spin axis caused nutation that would not damp out for the remainder of the mission. This phase of the mission, with the ecliptic normal orientation, lasted for approximately three years. Although nutation never damped, data gathering was uninterrupted. In late 1990, when SCATHA's transmitter became seriously degraded, the Air Force decided to turn SCATHA off. This would only be done after the satellite was made 'safe'. The most difficult part of making the vehicle safe was quickly purging the fuel. Several plans were considered. The selected plan was to perform a series of 20 degree attitude precession maneuvers (3 days apart to allow for the worst nutation to damp) until the fuel was depleted. Although this sounded simple, the actual execution proved difficult. This was due to a nearly complete lack of available telemetry data, large undamped motion of the long booms, inadequacies in attitude determination software, and an error in the fuel level calculation software. This paper discusses the various proposed termination plans and execution of the selected one. Attitude determination methodologies, nutation from maneuvers, and effects of the flexible booms on the termination mission are presented and analyzed from a satellite analyst point of view.

Stakkestad, Kjell↗

NASA NTRS2003

Puncture-Healing Properties of Carbon Nanotube-Filled Ionomers

Ionomers are polymers that contain ionic groups in relatively low concentrations along the polymer backbone. These ionic groups, in the presence of oppositely charged ions, form aggregates that lead to novel physical properties of the polymer. React-A-Seal(trademark) and Surlyn(trademark) are poly(ethylene-co-methacrylic acid) (EMAA) ionomer-based materials and Nucrel(trademark) is the EMAA acid copolymer neutralized to produce Surlyn(trademark). React-A-Seal(trademark), Surlyn(trademark), and Nucrel(trademark) recover into their original shapes following a high impact puncture at velocities ranging from 300 to 1200 ft/s ('self-healing'). This self-healing process may be of great benefit in space applications where structures are exposed to matter impacts. A thermal IR camera indicated a temperature increase to 98 C for Nucrel(trademark) 925, Surlyn(trademark) 8940, React-A-Seal(trademark), and Surlyn(trademark) 8920 after initial penetration. To understand and generalize the observed phenomena, questions concerning the mechanism of the puncture resealing must be answered. One suggestion is that the elastic character of the melt created by the puncture drives the self-healing. This inference is based on the observed temperature rise of approx. 3 C above the melting temperature of the samples (approx. 95 C) during the impact. With the expectation of gaining additional insight into the self-healing phenomenon, a thermodynamic and viscoelastic investigation was conducted using primarily DSC and DMA. Surlyn(trademark) and React-A-Seal(trademark) showed the characteristic order-disorder transition at approx. 52 C that has been reported in literature. Master curves were constructed from the creep isotherms for the four EMAA samples. An aging study was performed to investigate the irreproducibility and "tailing effect" observed in the creep data. The aging study indicated that, with increased aging time and temperature, changes in the polyethylene matrix lead to complexities in morphology resulting in changes in the magnitude and shape of the creep curves.

Ward, Thomas C.↗

NASA NTRS2016

Controlling Charged Particles with Inhomogeneous Electrostatic Fields

An energy analyzer for a charged-particle spectrometer may include a top deflection plate and a bottom deflection plate. The top and bottom deflection plates may be non-symmetric and configured to generate an inhomogeneous electrostatic field when a voltage is applied to one of the top or bottom deflection plates. In some instances, the top and bottom deflection plates may be L-shaped deflection plates.

Herrero, Federico A.↗

NASA NTRSDate not supplied

Feasibility of using Low-Cost COTS Sensors for Particulate Monitoring in Space Missions

Real-time measurement of particles suspended in the spacecraft cabin is of great importance to verify that maximum allowable dust concentrations are not exceeded. This is primarily to protect astronaut health, but also has implications for dust-sensitive equipment. Recently, there is growing interest in low-cost commercial off-the-shelf (COTS) particle sensors by air quality researchers for their ability to map concentrations of airborne particulate matter in various terrestrial settings. In addition to low cost (< $2,000), the compact size and minimal weight of these sensors make them a potential choice for space missions. The detection mechanism for these aerosol sensors is typically measurement of light scattered by particles as they flow through a sensing volume. The amount of scattered light for detection depends on the particle size, shape, density, and refractive index of the particle material. Ideally, particle instruments should be calibrated with reference instruments for each different type of aerosol measurement. In this study we review multiple parameters that may impact the performance of state-of-the-art low-cost aerosol sensors. Environmental factors such as temperature, relative humidity, low ambient pressure, radiation and charge environment, partial-gravity and microgravity can affect the accuracy of particle measurements. Characteristics of the dust aerosols including particle size distribution, aerosol composition, refractive index, morphology and concentration levels also affect the measurement accuracy. Finally, we look at these parameters and issues with respect to an example COTS low-cost aerosol sensor. Instrument performance specifications are evaluated, and experiments are performed to measure real-time concentrations of Arizona Road Dust (a terrestrial reference test dust) and lunar dust simulant in a laboratory chamber. Overall, this study provides insight for evaluating spacecraft particulate monitoring technologies and raises questions to be answered before incorporating low-cost COTS sensors in future space missions to dusty destinations.

lunar dust↗

DOE OSTI2021

The role of SAXS and molecular simulations in 3D structure elucidation of a DNA aptamer against lung cancer

Aptamers are short, single-stranded DNA or RNA oligonucleotide molecules that function as synthetic analogs of antibodies and bind to a target molecule with high specificity. Aptamer affinity entirely depends on its tertiary structure and charge distribution. Therefore, length and structure optimization are essential for increasing aptamer specificity and affinity. Here, we present a general optimization procedure for finding the most populated atomistic structures of DNA aptamers. Based on the existed aptamer LC-18 for lung adenocarcinoma, a new truncated LC-18 (LC-18t) aptamer LC-18t was developed. A three-dimensional (3D) shape of LC-18t was reported based on small-angle X-ray scattering (SAXS) experiments and molecular modeling by fragment molecular orbital or molecular dynamic methods. Molecular simulations revealed an ensemble of possible aptamer conformations in solution that were in close agreement with measured SAXS data. The aptamer LC-18t had stronger binding to cancerous cells in lung tumor tissues and shared the binding site with the original larger aptamer. The suggested approach reveals 3D shapes of aptamers and helps in designing better affinity probes.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Assessing Collision Cross Section Calibration Strategies for Traveling Wave-Based Ion Mobility Separations in Structures for Lossless Ion Manipulations

The collision cross section (CCS) is an important property that aids in the structural characterization of molecules. Here, we investigated the CCS calibration accuracy with traveling waves ion mobility spectrometry (TWIMS) separations in structures for lossless ion manipulations (SLIM) using three sets of calibrants. A series of singly negatively-charged phospholipids and bile acids were calibrated in nitrogen buffer gas using two different TW waveform profiles (square and sine) and amplitudes (20 V0-p, 25 V0-p, and 30 V 0-p ). The calibration errors for the three calibrant sets Agilent tuning mixture and polyalanine, and one assembled in-house showed negligible differences using a sine-shaped TW waveform. Furthermore, calibration errors were all within 1-2 % of the DTIMS measurements, with lower errors for sine waveforms, presumably due to the lower average and maximum fields experienced by ions. Finally, ultrahigh resolution multi-pass (long path length) SLIM TWIMS demonstrated improved CCS calibration for phospholipid and bile acid isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Rational Design of Novel Biomimetic Sequence-Defined Polymers for Mineralization Applications

Silica biomineralization is a naturally occurring process, wherein organisms use proteins and other biological structures to direct the formation of complex, hierarchical nanostructures. Discovery and characterization of such proteins and their underlying mechanisms spurred significant efforts to identify routes for biomimetic mineralization that reproduce the exquisite shapes and size selectivities found in nature. A common strategy has been the use of short peptide sequences with chemistry mimicking those found in natural systems, such as the use of the silaffin-derived R5 peptide. While progress has been made using this approach, there are many limitations that have prevented breakthroughs in biomimicry. To advance our ability to use charged macromolecules for silica formation, we propose to use sequence-defined synthetic polymers known as peptoids, or N-substituted polyglycines, which present significant capability for the precise tuning of sequence and structure beyond what can often be achieved with peptides alone. This study presents a computationally predicted design of these polymers that leads to the controlled formation of silica nanomaterials. We investigate surface adsorption and the mineralization process through analysis of binding mechanisms and energetics of the R5 system. Next, we synthesized two R5-inspired peptoids and validated our prediction in the design of mineralization polymers through characterization using surface plasmon resonance and electron microscopy. Here, this computationally guided study holds great promise for designing new sequences with unprecedented control of the placement of chemical functional groups, thus allowing for further unraveling of silicification mechanisms and the eventual design of sequence-defined synthetic polymers leading to the predictive synthesis of nanostructured functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Plasmonic Hybridization and Near-Field Localization in Gold “Dog Bone” Nanoparticles

Gold nanoparticles with complex anisotropic geometries offer unique opportunities for tailoring plasmonic near-fields beyond the limits of conventional nanorods. Here we combine photon-induced near-field electron microscopy (PINEM) and full-wave simulations to resolve plasmon hybridization and near-field localization in gold dog-bone nanoparticles and their dimers with and without conformal SiO 2 shells. We demonstrate that the dog-bone geometry drives unconventional polarization-dependent field confinement, including pronounced tip-localized near-fields under both longitudinal and transverse excitation. Conformal SiO 2 shells red-shift the plasmon resonances through dielectric screening and prevent charge-transfer coupling in adjacent dimers. Depending on the dimer orientation and excitation polarization, coupled structures exhibit distinct bonding- and antibonding-like hybridized modes as well as interparticle near-field channels. However, weakly interacting dimers retain largely independent particle responses with geometry-governed asymmetries. The close agreement between PINEM measurements and simulations establishes a direct picture of how shape, dielectric environment, and nanoscale coupling together define plasmonic modes in complex anisotropic nanoparticles. These findings provide design principles for engineering localized optical fields in plasmonic nanoscale structures.

hybridization↗

NASA NTRS1986

Solar High-energy Astrophysical Plasmas Explorer (SHAPE). Volume 1: Proposed concept, statement of work and cost plan

The concept of the Solar High-Energy Astrophysical Plasmas Explorer (SHAPE) is studied. The primary goal is to understand the impulsive release of energy, efficient acceleration of particles to high energies, and rapid transport of energy. Solar flare studies are the centerpieces of the investigation because in flares these high energy processes can be studied in unmatched detail at most wavelenth regions of the electromagnetic spectrum as well as in energetic charged particles and neutrons.

Dennis, Brian R.↗

NASA NTRS1995

Contamination detection NDE for cleaning process inspection

In the joining of multilayer materials, and in welding, the cleanliness of the joining surface may play a large role in the quality of the resulting bond. No non-intrusive techniques are currently available for the rapid measurement of contamination on large or irregularly shaped structures prior to the joining process. An innovative technique for the measurement of contaminant levels in these structures using laser based imaging is presented. The approach uses an ultraviolet excimer laser to illuminate large and/or irregular surface areas. The UV light induces fluorescence and is scattered from the contaminants. The illuminated area is viewed by an image-intensified CCD (charge coupled device) camera interfaced to a PC-based computer. The camera measures the fluorescence and/or scattering from the contaminants for comparison with established standards. Single shot measurements of contamination levels are possible. Hence, the technique may be used for on-line NDE testing during manufacturing processes.

Marinelli, W. J.↗

DOE OSTI2020

Effect of Anisotropic Confinement on Electronic Structure and Dynamics of Band Edge Excitons in Inorganic Perovskite Nanowires

Inorganic lead halide perovskite nanostructures show promise as the active layers in photovoltaics, light emitting diodes, and other optoelectronic devices. They are robust in the presence of oxygen and water, and the electronic structure and dynamics of these nanostructures can be tuned through quantum confinement. Here we create aligned bundles of CsPbBr3 nanowires with widths resulting in quantum confinement of the electronic wave functions and subject them to ultrafast microscopy. We directly image rapid one-dimensional exciton diffusion along the nanowires, and we measure an exciton trap density of roughly one per nanowire. Using transient absorption microscopy, we observe a polarization-dependent splitting of the band edge exciton line, and from the polarized fluorescence of nanowires in solution, we determine that the exciton transition dipole moments are anisotropic in strength. Furthermore, our observations are consistent with a model in which splitting is driven by shape anisotropy in conjunction with long-range exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Shell model analysis of the B ( E 2,2 + → 0 + ) values in the A = 70, T = 1 triplet 70 Kr, 70 Br, and 70 Se

The B(E2, 2 + → 0 + ) transition strengths of the T=1 isobaric triplet 70 Kr, 70 Br, 70 Se, recently measured at the RIKEN Radioactive Isotope Beam Factory (RIBF), are discussed in terms of state-of-the-art large scale shell model calculations using the JUN45 and JUN45 + LNPS plus Coulomb interactions. In this Letter we argue that, depending on the effective charges used, the calculations are either in line with the experimental data within statistical uncertainties, or the anomaly happens in 70 Br, rather than 70 Kr. In the latter case, we suggest that it can be due to the presence of a hitherto undetected 1 + T = 0 state below the yrast 2 + T = 1 state. Furthermore, our results do not support a shape change of 70 Kr with respect to the other members of the isobaric multiplet.

59 ≤ A ≤ 89↗

NASA NTRS1979

A reconsideration of nucleation phenomena in light of recent findings concerning the properties of small clusters, and a brief review of some other particle growth processes

The paper examines mechanisms of nucleation and growth by condensation and coagulation in the light of recent research on properties of small clusters. Homogeneous, hetero-molecular, and heterogeneous nucleation is analyzed, and expressions for the rate of formation of a stable condensed phase and evaluation of the free energy of formation of charged droplets are given. Application of high-pressure mass spectrometry which makes possible a direct determination of intensity spectra for cluster distributions, measurement of the thermodynamic properties of individual ion clusters and determination of cluster entropy and bond energy is discussed. Finally, coagulation of the condensed phase is considered, noting that concentration and mean particle size vary during coagulation, but the shape distribution is time independent, leading to the concept of a self-preserving aerosol size distribution.

Castleman, A. W., Jr.↗