Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Flight Set 360L006 STS-34 field joint protection system, thermal protection system, and systems tunnel components, volume 4

The performance of the thermal protection system, field joint protection system, and systems tunnel components of Flight Set 360L006, are documented, as evaluated by postflight hardware inspection. The condition of both motors was similar to previous flights. Sixteen aft edge hits were noted on the ground environment instrumentation thermal protection system. Each hit left a clean substrate, indicating that the damage was caused by nozzle severance debris and/or water impact. No National Space and Transporation System debris criteria for missing thermal protection system were violated. One 5.0 by 1.0 in. unbond was observed on the left hand center field joint K5NA closeout and was elevated to an in-flight anomaly (STS-34-M-4) by the NASA Ice/Debris team. Aft edge damage to the K5NA and an associated black streak indicate that burning debris from the nozzle severance system was the likely cause of the damage. Minor divots caused by debris were seen on previous flights, but this is the first occurrence of a K5NA unbond. Since the unbond occurred after booster separation there is no impact on flight safety and no corrective actions was taken. The right hand center field joint primary heater failed the dielectric withstanding voltage test after joint closeout. The heater was then disabled by opening the circuit breaker, and the redundant heater was used. The redundant heater performed nominally during the launch countdown. A similar condition occurred on Flight 4 when a secondary joint heater failed the dielectric withstanding voltage test.

Wilkinson, J. P.↗
NASA NTRS1990

RSRM-13 (360Q013) ballistics mass properties flight designation STS-41

The propulsion performance and reconstructed mass properties data from Thiokol's RSRM-13 motors which were assigned to the STS-41 launch are presented. The SRM propellant, TP-H1148, is a composite type solid propellant, formulated of polybutadiene acrylic acid acryonitrile terpolymer binder, epoxy curing agent, ammonium perchlorate oxidizer, and aluminum powder fuel. A small amount of burning rate catalyst (iron oxide) was added to achieve the desired propellant burn rate. The propellant evaluation and raw material information are also presented. The presented ballistic performance was based on the Operational Flight Instrumentation. The adjustments made to the raw data on this flight include biasing the data to correct ambient pressure before liftoff. The performance from each motor as well as matched pair performance values were well within the CEI Specification requirements.

Laubacher, Brian A.↗
NASA NTRS1990

Flight Motor Set 360T010 (STS-31R). Volume 1: System Overview

Flight motor set 360T010 was launched at approximately 7:34 a.m. CST (090:114:12:33:50.990 GMT) on 24 Apr. 1990 after one launch attempt (attempt on 10 Apr. 1990 was scrubbed following an indication of erratic operation of the Orbiter No. 1 Auciliary Power Unit No. 1). There were no problems with the solid rocket motor launches, overall motor performance was excellent. There were no debris concerns from either motor. Nearly all ballistic contract end item specification parameters were verified with the exception of ignition interval, pressure rise rate, and ignition time thrust imbalance. These could not be verified due to elimination of developmental flight instrumentation on 360L004 (STS-30R) and subsequent, but low sample rate data that were available showed nominal propulsion performance. All ballistic and mass property parameters that could be assessed closely matched the predicted values and were well within the required contract end item specification levels. All field joint heaters and igniter joint heaters performed without anomalies. Evaluation of the ground environment instrumentation measurements again verified thermal model analysis data and showed agreement with predicted environmental effects. No launch commit criteria violations occurred. Postflight inspection again verified nominal performance of the insulation, phenolics, metal parts, and seals. Postflight evaluation indicated both nozzles performed as expected during flight. All combustion gas was contained by insulation in the field and case-to-nozzle joints.

Garecht, Diane↗
NASA NTRS1989

A densitometric analysis of IIaO film flown aboard the space shuttle transportation system STS #3, 7, and 8

Since the United States of America is moving into an age of reusable space vehicles, both electronic and photographic materials will continue to be an integral part of the recording techniques available. Film as a scientifically viable recording technique in astronomy is well documented. There is a real need to expose various types of films to the Shuttle environment. Thus, the main objective was to look at the subtle densitometric changes of canisters of IIaO film that was placed aboard the Space Shuttle 3 (STS-3).

Hammond, Ernest C., Jr.↗
NASA NTRS1991

Debris/Ice/TPS Assessment and Photographic Analysis for Shuttle Mission STS-40

A debris, ice, Thermal Protection System (TPS) assessment and photographic analysis for Space Shuttle Mission STS-40 was conducted. Debris inspections of the flight elements and launch pad were performed before and after launch. Ice and frost conditions on the External Tank were assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle, followed by on-pad visual inspection. High speed photography was analyzed after launch to identify ice and debris sources and to evaluate potential vehicle damage and/or in-flight anomalies.

Katnik, Gregory N.↗
NASA NTRS1991

STS-35 scrub 3 hydrogen leak analysis

During the summer of 1990, space shuttle Columbia experienced both an external tank/orbiter disconnect hydrogen leak and multiple internal aft compartment hydrogen leaks. After the third scrub of STS-35, a leak investigation team was organized. In support of this team, an analysis of the data obtained during scrub 3 was performed. Based on this analysis, the engine 2 prevalve was concluded to be the most likely leak location and to account for most of the observed leakage.

Seymour, Dave↗
NASA NTRS1989

Flight motor set 360T004 (STS-30R). Volume 1: System overview

The fourth NASA space shuttle flight incorporating redesigned solid rocket motors began on 4 May 1989. The flight motors were designated 360Q004A (left-hand) and 360H004B (right-hand); the mission was designated STS-30R. Overall engine performance was excellent. The low sample rate data that was available showed exceptional propulsion performance. All ballistic and mass property parameters closely matched the predicted values and were well within the required contract end item specification levels that could be assessed. No strain, vibration, or aft skirt heating environments could be addressed due to developmental flight instrumentation deletion. Infrared readings from the shuttle thermal imager were considered very good when compared with ground environment instrumentation readings taken during both the aborted and the actual countdowns. However, hand-held infrared gun reading/ground environment instrumentation comparisons were considered poor during both countdowns, with the exception of the T - 3 hour timeframe during the actual launch. Postflight inspection again verified superior performance of the insulation, phenolics, metal parts, and seals. All combustion gas was contained by the insulation in the field and case-to-nozzle joints. Inadequate parachute performance on the left-hand booster caused high splashdown loads, which resulted in a displaced nozzle and factory joint weatherseal unbond anomalies. Recommendations were made concerning improved thermal modeling and instruments. The rationale for these recommendations, the dispositions of all anomalies, and complete result details are given.

Ricks, Glenn A.↗
NASA NTRS1990

Earth observations during Space Shuttle mission STS-34 - 18-23 October 1989

An overview is presented of the 31st Space Shuttle mission, whose major objective was to deploy the Galileo spacecraft. Color images are presented of photos taken by the four videocameras in the payload bay, one 16-mm Arriflex in the cabin, a videocamcorder, three 35 mm cameras, two 70 mm cameras, and an IMAX camera. In addition, descriptions of visual observations by the mission astronauts are given. The most significant STS-34 earth photography for the major geographical regions is discussed. Individual highlights of this mission include observation of the apparent recovery of the water level of Lake Nasser to conditions similar to those during the second Space Shuttle mission of 1981; the documentation of the impact of the Yucatan forest blowdown and fires after the passage of Hurricane Gilbert; and the confirmation of the high value of space photography under low and very low sun angle conditions for geomorphological and geological analyses.

Helfert, Michael R.↗
NASA NTRS1991

Wind profile perturbation analysis for STS

Two case studies of the relationship between STS ascent structural loads and wind profile characteristics are described. In the first case study, a wind profile with relatively weak winds is used to demonstrate the importance of launch vehicle velocity relative to the air and its effect on loads. In the second study, a pair of wind profiles is used to show how the determination of load exceedances is strongly influenced by the wind load persistence allowances for the baseline and two day-of-launch (DOL) steering commands called I-LOADs. Characteristics of the wind profiles and associated trajectory variable and wind-sensitive load indicators are examined. Energy spectra of in-plane and out-of-plane wind component and a load indicator are presented. An analysis of load indicator sensitivity to wind perturbation energy in the 1600-6400 m wavelength band for baseline and DOL I-LOAD is described.

Adelfang, S. I.↗
NASA NTRS1990

Earth observations during Space Shuttle Mission STS-33 - November 23-27, 1989

An overview is presented of photographs, astronaut impressions, and photographic equipment and techniques coincident with the Discovery STS-33 mission of November 23-27, 1989. Particularly significant geographical photographs of southern Africa, Madagascar, northern Africa, Southeast Asia islands, Pacific islands, and Australia are shown and reviewed. Meteorological and oceanographic observations are summarized along with film anomalies that occurred during this mission.

Amsbury, David L.↗
NASA NTRS1991

Lightning flash mensuration using video from the Space Shuttle Columbia (STS-32)

Using the payload bay television cameras from various Space Shuttle missions, a study was performed to investigate the relationship between the size and duration of lightning flashes, though separated by 1-100 km, that appeared to be flashing in synchronization. The area, duration, and rate of propagation of the lightning in these storms was also studied. By employing the analytical methods described, the use of deinterlaced video of lightning observed from STS-32 provides the highest sampling rate ever utilized for this purpose from space (1 image each 16.7 m/sec).

Pitts, David E.↗
NASA NTRS1991

Earth observations during Space Shuttle flight STS-41 - Discovery's mission to planet earth

An overview of space flight STS-41 is presented, including personal observations and comments by the mission astronauts. The crew deployed the Ulysses spacecraft to study the polar regions of the sun and the interplanetary space above the poles. Environmental observations, including those of Lake Turkana, Lake Chad, biomass burning in Madagascar and Argentina, and circular features in Yucatan are described. Observations that include landforms and geology, continental sedimentation, desert landscapes, and river morphology are discussed.

Lulla, Kamlesh P.↗
NASA NTRS1990

Tethered satellite systems - The 1991 STS-46 mission

The scope of a collaborative mission involving the implementation of a tethered satellite is described. The 1991 STS-46 mission, sponsored jointly by NASA, the ESA, and the Italian Space Agency involves the deployment of a tethered satellite on a Space Shuttle Discovery flight. The concept behind the tethered satellite is described, and extensive graphic descriptions of the mission profile and specifications are presented. The payload, the European Retrievable Carrier (Eureca), is explained in terms of its features and capabilities, as well as emergency considerations. A study of atmospheric composition will be the primary objective of the satellite project.

Chang Diaz, Franklin↗
NASA NTRS1991

Debris/ice/TPS assessment and photographic analysis for Shuttle Mission STS-43

A debris/ice Thermal Protection System (TPS) assessment and photographic analysis was conducted for Space Station Mission STS-43. Debris inspections of the flight elements and launch pad were performed before and after launch. Ice/frost conditions on the External Tank (ET) were assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by on-pad visual inspection. High speed photography was analyzed after launch to identify ice/debris sources and to evaluate potential vehicle damage and/or in-flight anomalies.

Katnik, Gregory N.↗
NASA NTRS1991

The microgravity environment of the Space Shuttle Columbia middeck during STS-32

Four hours of three-axis microgravity accelerometer data were successfully measured at the MA9F locker location in the Orbiter middeck of Columbia as part of the Microgravity Disturbances Experiment (MDE) on STS-32. These data were measured using the Honeywell In-Space Accelerometer, a small three-axis accelerometer that was hard-mounted onto the Fluid Experiment Apparatus to record the microgravity environment at the exact location of the MDE. Data were recorded during specific mission events such as Orbiter quiescent periods, crew exercise on the treadmill, and numerous Orbiter engine burns. Orbiter background levels were measured to be in the 3 x 10(exp -5) to 2 x 10(exp -4) G range, treadmill operations in the 6 x 10(exp -4) to 5 x 10(exp -3) G range, and Orbiter engine burns from 4 x 10(exp -3) to in excess of 1 x 10(exp -2) G. These data represent some of the first microgravity accelerometer data ever recorded in the middeck area of the Orbiter.

Dunbar, Bonnie J.↗
NASA NTRS1991

The microgravity environment of the Space Shuttle Columbia payload bay during STS-32

Over 11 hours of three-axis microgravity accelerometer data were successfully measured in the payload bay of Space Shuttle Columbia as part of the Microgravity Disturbances Experiment on STS-32. These data were measured using the High Resolution Accelerometer Package and the Aerodynamic Coefficient Identification Package which were mounted on the Orbiter keel in the aft payload bay. Data were recorded during specific mission events such as Orbiter quiescent periods, crew exercise on the treadmill, and numerous Orbiter engine burns. Orbiter background levels were measured in the 10(exp -5) G range, treadmill operations in the 10(exp -3) G range, and the Orbiter engine burns in the 10(exp -2) G range. Induced acceleration levels resulting from the SYNCOM satellite deploy were in the 10 (exp -2) G range, and operations during the pre-entry Flight Control System checkout were in the 10(exp -2) to 10(exp -1) G range.

Dunbar, Bonnie J.↗
NASA NTRS1988

Centaur in-tank explosion flow fields within STS and Titan 4 payload spaces

Explosions are examined which result from the mixing of liquid hydrogen and liquid oxygen (LH2-LO2) such that the reactants are confined by the missile (CBM) body. Explosion which were confined by the ground surface (CBGS) were also studied, with results reported elsewhere. Initial attempts to predict the reported PYRO experimental results were unsuccessful. A new reaction energy addition hypothesis was then developed and tested. The results obtained provide reasonable agreement with the experiments both in the near and far field. Calculations were performed to predict the environment which would occur at the Galileo Radioisotope Thermoelectric Generator (RTG) location given a Centaur G' upper stage and an STS launch vehicle. It was concluded that the principle threat to the RTG in this environment would be the impact of a slug of LH2. No analyses were conducted to assess the response of the Galileo RTG to such an environment. It was shown that the flow field resulting from the failure of the Centaur G' tankage was benign. It was concluded that while the cryogen particle velocity was very high, the flow field density was extremely low. As a result, the dynamic pressure was a trivial eight psia.

Eck, M.↗
NASA NTRS1991

Space Transportation System (STS): Emergency support

The DSN (Deep Space Network) mission support requirements for emergency support of the Space Transportation System (STS) are summarized. Coverage would be provided by the DSN during emergencies that would prevent communications between the shuttle and the White Sands TDRSS receiving station. The DSN support requirements are defined through the presentation of tables and narratives describing the spacecraft flight profile; DSN support coverage; frequency assignments; support parameters for telemetry, command and support systems; and tracking support responsibility.

Janoski, T.↗