Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STREAM FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Spectral solver for multi-scale plasma physics simulations with dynamically adaptive number of moments

A spectral method for kinetic plasma simulations based on the expansion of the velocity distribution function in a variable number of Hermite polynomials is presented. The method is based on a set of non-linear equations that is solved to determine the coefficients of the Hermite expansion satisfying the Vlasov and Poisson equations. In this paper, we first show that this technique combines the fluid and kinetic approaches into one framework. Second, we present an adaptive strategy to increase and decrease the number of Hermite functions dynamically during the simulation. The technique is applied to the Landau damping and two-stream instability test problems. Performance results show 21% and 47% saving of total simulation time in the Landau and two-stream instability test cases, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Delineating the First Few Seconds of Supramolecular Self-Assembly of Mesostructured Titanium Oxide Thin Films through Time-Resolved Small Angle X-ray Scattering

The early stages of evaporation induced self-assembly of titanium oxide mesophases from a precursor solution containing TiCl{sub 4} and the Pluronic triblock copolymer F-127 in HCl-water-ethanol solution have been studied using time-resolved SAXS techniques. Two experimental protocols were used to conduct these experiments. In one of these, the precursor solution was pumped around a closed loop as solvent was allowed to evaporate at a constant humidity-controlled rate. In the second protocol, a film of precursor solution was measured periodically as it dried completely to a residue under a stream of dry air. This permitted the detailed monitoring of changes in solution chemistry as a function of the elimination of volatile components followed by the actual drying process itself. The SAXS data were modeled in terms of two Guinier radii for soft nanoparticles while a broad Gaussian feature in the scatter profiles was accounted for by particle-article scattering interference due to close packing. For the initial precursor solution, one Guinier radius was found to be about 17 {angstrom} while the other ranged from 4 to 11 {angstrom}. Changing the rate of evaporation affected the two radii differently with a more pronounced effect on the smaller particle size range. Analysis gave an interparticle distance in the range 55--80 {angstrom} for the initial precursor solution which decreased steadily at both of the humidities investigated as evaporation proceeded and the particle packing increased. These results represent the first attempts to monitor in a precise fashion the growth of nano building blocks during the initial stages of the self-assembly process of a titanium oxide mesophase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Building Intelligent Cyberinfrastructure to Learn Iteratively from both Observations and Models for Understanding Watershed Dynamics

Focal Area(s): Predictive modeling through the use of AI techniques and AI-derived model components; the use of AI and other tools to design a prediction system comprising of a hierarchy of models (e.g., AI-driven model/component/parameterization selection). Science Challenge: Watershed processes, such as the fate and transport of sediment, carbon and nutrients across landscapes and their fluxes to water bodies (e.g., streams, rivers and lakes), have important implications for global and regional carbon and nutrient dynamics, biogeochemical functioning of terrestrial ecosystems, and soil functions. The magnitude of lateral surface/subsurface transport and fluxes of sediment, carbon and nutrients are key factors controlling the vulnerability of watersheds to climate extremes such as droughts, wildfires, and floods. Recent field observations and other scientific evidence suggest that the magnitudes of lateral transport and fluxes of sediment, carbon and nutrients are governed primarily by the spatial and vertical heterogeneity of landscape and soil properties and by pedogenic processes. However, the current generation of land surface and watershed models do not mechanistically couple the terrestrial and hydrologic systems, nor do they represent sufficiently the spatial and vertical heterogeneity of land surface and subsurface properties. On the other hand, increasing complexity of coupled watershed and land surface models requires more data to parameterize, calibrate and validate. Remote sensing (RS) provides a means to acquire spatial data and characterize their heterogeneity at the watershed scale, overcoming a major limitation associated with conventional point measurements. To improve the representation of land-surface and surface/subsurface process coupling and sub-grid heterogeneity in watershed models, it is essential to build our predictive understanding by learning from both the multi-scale multi-process modeling and diverse multi-scale data while leveraging powerful artificial intelligence (AI) techniques.

54 ENVIRONMENTAL SCIENCES↗

Nano-Engineered Catalyst Supported on Ceramic Hollow Fibers for the Utilization of CO 2 in Dry Reforming to Produce Syngas

The objective of this project was to develop a novel catalytic reactor containing nano-engineered catalysts for the utilization of CO 2 (captured from coal-fired power plants and other CO 2 emitting sources) in dry methane reforming (DMR) (CO 2 + CH 4 → 2 H 2 + 2 CO) to produce synthesis gas (syngas). The technology aims to reduce CO2 emissions by developing beneficial uses for CO 2 from coal-fired power plants. It also offers an alternative to mitigate CO 2 emissions in areas where geologic storage may not be an optimal solution and/or utilization could significantly offset the costs of carbon capture and sequestration. The nano-engineered Ni-based catalyst was prepared by atomic layer deposition (ALD). The Ni particles were as small as ~2-4 nm. The nano-engineered catalyst showed CH 4 conversion >95%, H 2 /CO ratio in the range of 0.7-1.0, and CH 4 reforming rate as high as 2,500 L/h/gNi at 850 ºC and pressure of 15-25 psia. The Ni-based ALD catalyst also showed good stability in DMR reaction during a 200-h continuous operation at 850 °C. This is due to strong bonding between the nanoparticles and substrates since the Ni nanoparticles were chemically bonded to the substrate during the ALD process. The high thermal stability maintains the high dispersion of Ni nanoparticles, which can inhibit coke formation because their step edges are small enough to limit carbon nucleation and growth. Technoeconomic analysis (TEA) indicates the levelized cost of syngas (LCOS) is $172/ton with our technology, which is lower than the equivalent (molar) cost of hydrogen produced by steam methane reforming (SMR) or autothermal reforming (ATR). The major operating cost is natural gas feed and fuel, and the levelized cost is highly sensitive to the price of natural gas and relatively insensitive to the CAPEX. Revenues from syngas could have a significant impact on the net cost of electricity (COE), depending on the cost of natural gas and the selling price of syngas, estimated at $36 per MWh if the syngas were sold at $195 per ton. Following DOE NETL’s guidance, a lifecycle analysis (LCA) was conducted to compare with SMR. The functional unit for the basis of comparison was defined as 1kg carbon monoxide in the product stream. The global warming potential (GWP) of our process was found to be 40% lower than the state-of-the-art SMR process. The sensitivity analysis confirms the emissions are most sensitive to the natural gas fuel requirements to deliver heat to the process.

01 COAL, LIGNITE, AND PEAT↗

Workflows Community Summit 2022: A Roadmap Revolution

Scientific workflows have become integral tools in broad scientific computing use cases. Science discovery is increasingly dependent on workflows to orchestrate large and complex scientific experiments that range from the execution of a cloud-based data preprocessing pipeline to multi-facility instrument-to-edge-to-HPC computational workflows. Given the changing landscape of scientific computing (often referred to as a computing continuum) and the evolving needs of emerging scientific applications, it is paramount that the development of novel scientific workflows and system functionalities seek to increase the efficiency, resilience, and pervasiveness of existing systems and applications. Specifically, the proliferation of machine learning/artificial intelligence (ML/AI) workflows, need for processing large-scale datasets produced by instruments at the edge, intensification of near real-time data processing, support for long-term experiment campaigns, and emergence of quantum computing as an adjunct to HPC, have significantly changed the functional and operational requirements of workflow systems. Workflow systems now need to, for example, support data streams from the edge-to-cloud-to-HPC, enable the management of many small-sized files, allow data reduction while ensuring high accuracy, orchestrate distributed services (workflows, instruments, data movement, provenance, publication, etc.) across computing and user facilities, among others. Further, to accelerate science, it is also necessary that these systems implement specifications/standards and APIs for seamless (horizontal and vertical) integration between systems and applications, as well as enable the publication of workflows and their associated products according to the FAIR principles.

97 MATHEMATICS AND COMPUTING↗

Effects of Nitrate Exposure on the Functional Structure of a Microbial Community in a Uranium-contaminated Aquifer

Increasing nitrogen deposition, increasing atmospheric CO2, and decreasing biodiversity are three main environmental changes occurring on a global scale. The BioCON (Biodiversity, CO2, and Nitrogen) ecological experiment site at the University of Minnesota's Cedar Creek Ecosystem Science Reserve started in 1997, to better understand how these changes would affect soil systems. To understand how increasing nitrogen deposition affects the microbial community diversity, heterogeneity, and functional structure impact soil microbial communities, 12 samples were collected from the BioCON plots in which nitrogenous fertilizer was added to simulate the effect of increasing nitrogen deposition and 12 samples from without added fertilizer. DNA from the 24 samples was extracted using a freeze-grind protocol, amplified, labeled with a fluorescent dye, and then hybridized to GeoChip, a functional gene array containing probes for genes involved in N, S and C cycling, metal resistance and organic contaminant degradation. Detrended correspondence analysis (DCA) of all genes detected was performed to analyze microbial community patterns. The first two axes accounted for 23.5percent of the total variation. The samples fell into two major groups: fertilized and non-fertilized, suggesting that nitrogenous fertilizer had a significant impact on soil microbial community structure and diversity. The functional gene numbers detected in fertilized samples was less that detected in non-fertilizer samples. Functional genes involving in the N cycling were mainly discussed.

54 ENVIRONMENTAL SCIENCES↗

Structural Basis for the Lipopolysaccharide Export Activity of the Bacterial Lipopolysaccharide Transport System

Gram-negative bacteria have a dense outer membrane (OM) coating of lipopolysaccharides, which is essential to their survival. This coating is assembled by the LPS (lipopolysaccharide) transport (Lpt) system, a coordinated seven-subunit protein complex that spans the cellular envelope. LPS transport is driven by an ATPase-dependent mechanism dubbed the “PEZ” model, whereby a continuous stream of LPS molecules is pushed from subunit to subunit. This review explores recent structural and functional findings that have elucidated the subunit-scale mechanisms of LPS transport, including the novel ABC-like mechanism of the LptB2FG subcomplex and the lateral insertion of LPS into the OM by LptD/E. New questions are also raised about the functional significance of LptA oligomerization and LptC. The tightly regulated interactions between these connected subcomplexes suggest a pathway that can react dynamically to membrane stress and may prove to be a valuable target for new antibiotic therapies for Gram-negative pathogens.

59 BASIC BIOLOGICAL SCIENCES↗

aospsap3w1s.b1

The aospsap3w1m process reads in data from the aospsap3w.b1 datastream and applies a dilution correction to the aerosol sample flow rate, and a filter loading correction to the absorption coefficients. The filter loading is corrected by multiplying by the Weiss transfer function f_w = 1/1.031 * 1/1.22 * (1/(1.0796 Tr + 0.71)) = 1 / (1.3579 Tr + 0.8931) where Tr is the transmittance for a given wavelength. This form incorporates the initial PSAP transfer function with modifications in Bond 1999 and subsequently in Ogren 2010. The one second (1s) data stream is only created for BNL psap3w instruments where the 1 second samples are available. The one minute (1m) data streams contain the averages of the one second data.

54 ENVIRONMENTAL SCIENCES↗

aospsap3w1m.b1

The aospsap3w1m process reads in data from the aospsap3w.b1 datastream and applies a dilution correction to the aerosol sample flow rate, and a filter loading correction to the absorption coefficients. The filter loading is corrected by multiplying by the Weiss transfer function f_w = 1/1.031 * 1/1.22 * (1/(1.0796 Tr + 0.71)) = 1 / (1.3579 Tr + 0.8931) where Tr is the transmittance for a given wavelength. This form incorporates the initial PSAP transfer function with modifications in Bond 1999 and subsequently in Ogren 2010. The one second (1s) data stream is only created for BNL psap3w instruments where the 1 second samples are available. The one minute (1m) data streams contain the averages of the one second data.

54 ENVIRONMENTAL SCIENCES↗

Computer Program for Calculation of a Gas Temperature Profile by Infrared Emission: Absorption Spectroscopy

A computer program to calculate the temperature profile of a flame or hot gas was presented in detail. Emphasis was on profiles found in jet engine or rocket engine exhaust streams containing H2O or CO2 radiating gases. The temperature profile was assumed axisymmetric with an assumed functional form controlled by two variable parameters. The parameters were calculated using measurements of gas radiation at two wavelengths in the infrared. The program also gave some information on the pressure profile. A method of selection of wavelengths was given that is likely to lead to an accurate determination of the parameters. The program is written in FORTRAN IV language and runs in less than 60 seconds on a Univac 1100 computer.

Buchele, D. R.↗

Solar wind proton temperature-velocity relationship

Helios 1 data are analyzed to find an experimental fit for the temperature-velocity relationship at 1 AU. It is shown that the proton temperature-velocity changes at a velocity of approximately 500 km/s. Interplanetary dynamic processes, i.e., stream interactions, are shown to affect the temperature-velocity relationships less than 22 percent; the functional form of these relationships appears to be preserved throughout the solar cycle. It is pointed out that any comprehensive model of the solar wind will have to address the difference in the temperature-velocity relationship between the low- and high-speed wind, since this is a product of the acceleration and subsequent heating process generating the solar wind.

Lopez, R. E.↗

Initial Field Evaluation of Pilot Procedures for Flying CTAS Descent Clearances

The Center TRACON Automation System (CTAS) is a new support system that is designed to assist air traffic controllers in the management of arrival traffic. CTAS will provide controllers with more information about current air traffic, enabling them to provide clearances for efficient, conflict-free descents that help achieve an orderly stream of aircraft at the final approach fix. CTAS is a computer-based system that functions as a "ground-based FMS" that can predict flight trajectories and arrival times for all incoming aircraft. CTAS uses an aircraft's cruise airspeed; current air traffic, winds and temperature; performance characteristics of the aircraft type; and individual airline preferences to create a flight profile from cruise altitude to the final approach fix. Controllers can use this flight profile to provide a descent clearance that will allow an aircraft to fly an efficient descent and merge more smoothly with other arriving aircraft. A field test of the CTAS Descent Advisor software was conducted at the Denver Center for aircraft arriving at the Stapleton International Airport from September 12-29. CTAS Descent clearances were given to a NASA flight test aircraft and to 77 airline flights that arrived during low traffic periods. For the airline portion of the field test, cockpit procedures and pilot briefing packages for both FMS equipped and unequipped aircraft were developed in cooperation with an airline. The procedures developed for the FMS equipped aircraft were to fly a VNAV descent at a controller specified speed to cross a metering fix at a specified altitude and speed. For nonFMS aircraft, the clearance also specified a CTAS calculated top-of-descent point. Some CTAS related flight deck issues included how much time was available to the pilots' for compliance, the amount of information that needed to be interpreted in the clearance and possible repercussions of misunderstandings. Data collected during the study ranged from subjective data (including the airline pilots' opinions and comments about the new descent clearances and procedures) to objective data (including observations of aircraft performance from the flight deck). This paper will present data and the resulting changes in the design of the procedures and clearance phraseology.

Palmer, Everett↗

Update On the Status of the FLUKA Monte Carlo Transport Code*

The FLUKA Monte Carlo transport code is a well-known simulation tool in High Energy Physics. FLUKA is a dynamic tool in the sense that it is being continually updated and improved by the authors. We review the progress achieved since the last CHEP Conference on the physics models, some technical improvements to the code and some recent applications. From the point of view of the physics, improvements have been made with the extension of PEANUT to higher energies for p, n, pi, pbar/nbar and for nbars down to the lowest energies, the addition of the online capability to evolve radioactive products and get subsequent dose rates, upgrading of the treatment of EM interactions with the elimination of the need to separately prepare preprocessed files. A new coherent photon scattering model, an updated treatment of the photo-electric effect, an improved pair production model, new photon cross sections from the LLNL Cullen database have been implemented. In the field of nucleus-- nucleus interactions the electromagnetic dissociation of heavy ions has been added along with the extension of the interaction models for some nuclide pairs to energies below 100 MeV/A using the BME approach, as well as the development of an improved QMD model for intermediate energies. Both DPMJET 2.53 and 3 remain available along with rQMD 2.4 for heavy ion interactions above 100 MeV/A. Technical improvements include the ability to use parentheses in setting up the combinatorial geometry, the introduction of pre-processor directives in the input stream. a new random number generator with full 64 bit randomness, new routines for mathematical special functions (adapted from SLATEC). Finally, work is progressing on the deployment of a user-friendly GUI input interface as well as a CAD-like geometry creation and visualization tool. On the application front, FLUKA has been used to extensively evaluate the potential space radiation effects on astronauts for future deep space missions, the activation dose for beam target areas, dose calculations for radiation therapy as well as being adapted for use in the simulation of events in the ALICE detector at the LHC.

Ferrari, A.↗

On Convergence of Development Costs and Cost Models for Complex Spaceflight Instrument Electronics

Development costs of a few recent spaceflight instrument electrical and electronics subsystems have diverged from respective heritage cost model predictions. The cost models used are Grass Roots, Price-H and Parametric Model. These cost models originated in the military and industry around 1970 and were successfully adopted and patched by NASA on a mission-by-mission basis for years. However, the complexity of new instruments recently changed rapidly by orders of magnitude. This is most obvious in the complexity of representative spaceflight instrument electronics' data system. It is now required to perform intermediate processing of digitized data apart from conventional processing of science phenomenon signals from multiple detectors. This involves on-board instrument formatting of computational operands from row data for example, images), multi-million operations per second on large volumes of data in reconfigurable hardware (in addition to processing on a general purpose imbedded or standalone instrument flight computer), as well as making decisions for on-board system adaptation and resource reconfiguration. The instrument data system is now tasked to perform more functions, such as forming packets and instrument-level data compression of more than one data stream, which are traditionally performed by the spacecraft command and data handling system. It is furthermore required that the electronics box for new complex instruments is developed for one-digit watt power consumption, small size and that it is light-weight, and delivers super-computing capabilities. The conflict between the actual development cost of newer complex instruments and its electronics components' heritage cost model predictions seems to be irreconcilable. This conflict and an approach to its resolution are addressed in this paper by determining the complexity parameters, complexity index, and their use in enhanced cost model.

Kizhner, Semion↗

Model of Mixing Layer With Multicomponent Evaporating Drops

A mathematical model of a three-dimensional mixing layer laden with evaporating fuel drops composed of many chemical species has been derived. The study is motivated by the fact that typical real petroleum fuels contain hundreds of chemical species. Previously, for the sake of computational efficiency, spray studies were performed using either models based on a single representative species or models based on surrogate fuels of at most 15 species. The present multicomponent model makes it possible to perform more realistic simulations by accounting for hundreds of chemical species in a computationally efficient manner. The model is used to perform Direct Numerical Simulations in continuing studies directed toward understanding the behavior of liquid petroleum fuel sprays. The model includes governing equations formulated in an Eulerian and a Lagrangian reference frame for the gas and the drops, respectively. This representation is consistent with the expected volumetrically small loading of the drops in gas (of the order of 10 3), although the mass loading can be substantial because of the high ratio (of the order of 103) between the densities of liquid and gas. The drops are treated as point sources of mass, momentum, and energy; this representation is consistent with the drop size being smaller than the Kolmogorov scale. Unsteady drag, added-mass effects, Basset history forces, and collisions between the drops are neglected, and the gas is assumed calorically perfect. The model incorporates the concept of continuous thermodynamics, according to which the chemical composition of a fuel is described probabilistically, by use of a distribution function. Distribution functions generally depend on many parameters. However, for mixtures of homologous species, the distribution can be approximated with acceptable accuracy as a sole function of the molecular weight. The mixing layer is initially laden with drops in its lower stream, and the drops are colder than the gas. Drop evaporation leads to a change in the gas-phase composition, which, like the composition of the drops, is described in a probabilistic manner

Bellan, Josette↗

Electrostatic beam instabilities in a positive/negative ion plasma

This paper examines the linear theory of electrostatic waves and instabilities in an unmagnetized, homogeneous Vlasov plasma. The first configuration considered is that of a stable plasma with three Maxwellian components: electrons, positive ions, and negative ions. The dispersion properties of the lightly damped ion modes are studied as a function of relative electron density and relative component temperatures. The second configuration considered is that of a tenuous electron-ion beam with drift speed streaming through a negative/positive ion plasma. If the beam is very tenuous, an electron beam instability is excited; if the beam is more dense, the instability becomes Buneman-like with parabolic dispersion. The thresholds and maximum growth rates of these instabilities are described as functions of the beam density and drift speed.

Galvez, Miguel↗

The dark matter profile of the Milky Way inferred from its circular velocity curve

ABSTRACT In this paper, we construct the circular velocity curve of the Milky Way out to ∼30 kpc, providing an updated model of the dark matter density profile. We derive precise parallaxes for 120 309 stars with a data-driven model, using APOGEE DR17 spectra combined with GaiaDR3, 2MASS, and WISE photometry. At outer galactic radii up to 30 kpc, we find a significantly faster decline in the circular velocity curve compared to the inner parts. This decline is better fit with a cored Einasto profile with a slope parameter $0.91^{+0.04}_{-0.05}$ than a generalized Navarro–Frenk–White (NFW) profile. The virial mass of the best-fitting dark matter halo profile is only $1.81^{+0.06}_{-0.05}\times 10^{11}$ M⊙, significantly lower than what a generalized NFW profile delivers. We present a study of the potential systematics, affecting mainly large radii. Such a low mass for the Galaxy is driven by the functional forms tested, given that it probes beyond our measurements. It is found to be in tension with mass measurements from globular clusters, dwarf satellites, and streams. Our best-fitting profile also lowers the expected dark matter annihilation signal flux from the galactic centre by more than an order of magnitude, compared to an NFW profile-fit. In future work, we will explore profiles with more flexible functional forms to more fully leverage the circular velocity curve and observationally constrain the properties of the Milky Way’s dark matter halo.

Ou, Xiaowei (ORCID:0000000246699967)↗

Hydrogenation of the nanopowders that form in a carbon-helium plasma stream during the introduction of Ni and Mg

Composite nanoparticles consisting of magnesium, nickel, and carbon atoms are studied both theoretically and experimentally. The calculations performed in terms of the density functional theory show that the jump frequency of hydrogen atoms in nickel-containing magnesium hydride increases substantially near impurity nickel atoms; as a result, the rate of hydrogen absorption by magnesium also increases. Nickel on the magnesium surface is shown to be absorbed via an island growth mechanism. Composite Mg-C, Ni-C, and Mg-Ni-C powders are produced by plasmachemical synthesis in a carbon-helium plasma stream. Hydrogen is introduced into a chamber during synthesis. It is found by X-ray photoelectron spectroscopy and thermogravimetric analysis that, among these three composites, only Mg-Ni-C contains magnesium fixed in the MgH{sub 2} compound. The process of such 'ultrarapid' hydrogenation of magnesium, which occurs in the time of formation of composite nanoparticles, can be explained by the catalytic action of nickel, which is enhanced by a high temperature. Scanning electron microscopy micrographs demonstrate the dynamics of the dehydrogenation of Mg-Ni-C composite nanoparticles in heating by an electron beam.

36 MATERIALS SCIENCE↗