Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Water Recovery from Bioreactor Mixed Liquors Using Forward Osmosis with Polyelectrolyte Draw Solutions

This paper reports on the use of forward osmosis (FO) with polyelectrolyte draw solutions to recover water from bioreactor mixed liquors. The work was motivated by the need for new regenerative water purification technologies to enable long-duration space missions. Osmotic membrane bioreactors may be an option for water and nutrient recovery in space if they can attain high water flux and reverse solute flux selectivity (RSFS), which quantifies the mass of permeated water per mass of draw solute that has diffused from the draw solution into a bioreactor. Water flux was measured in a direct flow system using wastewater from a municipal wastewater treatment plant and draw solutions prepared with two polyelectrolytes at different concentrations. The direct flow tests displayed a high initial flux (>10 L/m2/h) that decreased rapidly as solids accumulated on the feed side of the membrane. A test with deionized water as the feed revealed a small mass of polyelectrolyte crossover from the draw solution to the feed, yielding an RSFS of 80. Crossflow filtration experiments demonstrated that steady state flux above 2 L/m2·h could be maintained for 70 h following an initial flux decline due to the formation of a foulant cake layer. This study established that FO could be feasible for regenerative water purification from bioreactors. By utilizing a polyelectrolyte draw solute with high RSFS, we expect to overcome the need for draw solute replenishment. This would be a major step towards sustainable operation in long-duration space missions.

Calen R Raulerson↗

Thermodynamic Properties of Uranium-Zirconium Carbide Solid Solutions with Oxygen

Uranium-zirconium carbide solid solutions are potential candidates for fuel in space nuclear reactors. To support development of advanced robust fuels for space applications, (U y Zr 1-y )C x O z solid solutions were synthesized via carbothermic reduction with uranium, carbon, and oxygen contents raging from y=0.05 – 0.3, x=0.95 – 0.98, and z = 0.02 – 0.07. These solid solutions were subsequently characterized by X-ray diffraction and elemental combustion analysis. High-temperature oxidative drop solution calorimetry in molten sodium molybdate solvent at 1073 K was employed to determine the formation, oxidation, and mixing enthalpies of (U y Zr 1-y )C x O z solid solutions, and thereby for evaluating their thermodynamic stability. The solid solutions are enthalpically less stable than the UC and ZrC end members. They also become less stable and more reactive towards oxidation with increasing uranium content. Incorporation of oxygen into solid solutions increases their solid solution-stability and improves their oxidation resistance.

Calorimetry↗

Method of making a photovoltaic device on a substrate at high speed with perovskite solution

A continuous inline method for production of photovoltaic devices at high speed includes: providing a substrate; depositing a first carrier transport solution layer with a first carrier transport deposition device to form a first carrier transport layer on the substrate; depositing a Perovskite solution comprising solvent and perovskite precursor materials with a Perovskite solution deposition device on the first carrier transport layer; drying the deposited Perovskite solution to form a Perovskite absorber layer; and depositing a second carrier transport solution with a second carrier transport deposition device to form a second carrier transport layer on the Perovskite absorber layer, wherein the deposited Perovskite solution is dried at least partially with a fast drying device which causes a conversion reaction and the Perovskite solution to change in optical density by at least a factor of 2 in less than 0.5 seconds after the fast drying device first acts on the Perovskite solution.

Christensen, Scott Kenneth↗

Code Verification and Solution Verification framework in pin-resolved neutron transport code MPACT

Program verification in scientific computing encompasses the application of formal and mathematical techniques to a scientific computing code for its credibility, accuracy, and validity. Code Verification identifies bugs and performance issues in the software development stage. Solution Verification assesses the applicability of the code and the accuracy of the solution to problems of interest. Both activities utilize application cases and quantify the error against prescribed acceptance criteria. However, simply executing more application cases does not guarantee stronger or more comprehensive credibility. Here, we establish a verification framework that involves Code Verification and Solution Verification, both of which work together such that the overarching goal of “converge to the correct answer for the intended application” can be reasonably inferred. The application of such a verification framework is demonstrated using the pin-resolved neutron transport code MPACT, where standard unit tests and regression tests are covered, and where the Method of Exact Solutions and the Method of Manufactured Solutions are successfully used. Additionally, the applicability of Method of Manufactured Solutions is extended to the OECD/NEA C5G7 benchmark problems of practical material and geometric configurations. Solution Verification activities are demonstrated on a practical hierarchy of application models of increasing complexity ranging from 2D pin cell problems to 3D assembly problems. The convergence behavior and rate of convergence with respect to each individual variable are studied and provided. This framework can be adapted broadly to other fields involving scientific computing codes.

97 MATHEMATICS AND COMPUTING↗

Thermodynamic modeling of solid solutions between monosulfate and monochromate 3CaO Bullet Al{sub 2}O{sub 3} Bullet Ca[(CrO{sub 4}){sub x}(SO{sub 4}){sub 1-x}] Bullet nH{sub 2}O

In hydrated cement paste AFm-phases are regarded to play an important role in the binding of the toxic contaminant chromate through isomorphic substitution with sulfate. Solid solutions formation can lower the solubility of the solids, thus reducing chromate leaching concentrations. Solid solutions between monosulfate and monochromate were synthesized and characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX) and inductive coupled plasma optical emission spectroscopy (ICP-OES). Based on the measured ion concentrations in solution total solubility products of the solid solution series were determined. For pure monochromate a logK = - 28.4 {+-} 0.7 was determined. Results from solid and solution analysis showed that limited solid solutions exist. Based on XRD diffractograms a solid solution with a miscibility gap 0.15 < Crx < 0.85 with a dimensionless Guggenheim parameter of 2.43 was proposed.

36 MATERIALS SCIENCE↗

Thermochemistry of La{sub 0.7}Sr{sub 0.3}Mn{sub 1-x}Fe{sub x}O{sub 3} solid solutions (0<x<1)

The structure, the energetics and the internal redox reactions of La{sub 0.7}Sr{sub 0.3}Fe{sub x}Mn{sub 1-x}O{sub 3} have been studied in the complete solid solution range 0.0<x<1.0. High temperature oxide melt drop solution calorimetry was performed to determine the enthalpies of formation from binary oxides and the enthalpy of mixing. There is a noticeable change in the energetics of the solid solution near x=0.7, which is due to the growing concentration of Fe{sup 4+} at higher Fe/(Fe+Mn) ratio. The balance between different valences of the transition metals, Mn and Fe, is the main factor in determining the energetics of the La{sub 0.70}Sr{sub 0.30}Fe{sub x}Mn{sub 1-x}O{sub 3} solid solution. - Graphical abstract: Enthalpy of mixing ({Delta}H{sub mix}) of La{sub 0.7}Sr{sub 0.3}Mn{sub 1-x}Fe{sub x}O{sub 3-{gamma}} solid solution at room temperature as a function of Fe/(Fe+Mn) ratio, x. Linear fits for the two regions at low and high x are shown as solid lines. The inset shows the content of Mn{sup 3+}, Mn{sup 4+}, Fe{sup 3+} and Fe{sup 4+} as a function of x based on the work by Jonker. The redox reactions between different valence states of Fe and Mn dominate the energetic behavior of the solid solution. Highlights: > Investigated the structure, the energetics and the internal redox reactions of La{sub 0.7}Sr{sub 0.3}Mn{sub 1-x}Fe{sub x}O{sub 3}. > Determined the formation and mixing enthalpy by high temperature oxide melt solution calorimetry. > Symmetry of the perovskite, transition metal valence and energetics are interdependent. > Thermochemical data shows convincing evidence of the interplay between the Mn{sup 4+} and the Fe{sup 4+} ions. > Balance between different valences of Mn and Fe dominates the energetics of La{sub 0.7}Sr{sub 0.3}Fe{sub x}Mn{sub 1-x}O{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The complex synthesis and solid state chemistry of ceria-lanthana solid solutions prepared via a hexamethylenetetramine precipitation

Mixed oxide solid solutions are becoming ever more commercially important across a range of applications. However, their synthesis can be problematical. Here, we show that ceria-lanthana solid solutions can be readily prepared via simple precipitation using hexamethylenetetramine. However, the solution chemistry can be complex, which results in the precipitated particles having a complex structure and morphology. Great care must be taken in both the synthesis and characterisation to quantify the complexity of the product. Even very high heat treatments were not able to produce highly homogeneous materials and X-ray diffractions reveals the non-equilibrium form of particles prepared in this way. Unexpected crystal structures are revealed including a new metastable cubic La{sub 2}O{sub 3} phase. - Graphical abstract: The suggested mechanism for the formation of dual fluorite phase particles, where Step 1 corresponds to room temperature aging, Step 2; heating the solution to 90 deg. C, Step 3; cooling of the solution to room temperature, Step 4; calcination to 500 deg. C, Step 5; calcination to 700 deg. C and Step 6; calcination to 1300 deg. C. The terminology of e.g. La{sub 1-x}Ce{sub x}(OH){sub 3} is used to indicate the formation of a mixed oxy-hydroxy participate rather than a definitive assignment of stoichiometry. Similarly, La{sub 1-y}Ce{sub y}O{sub 2} only implies a mixed solid solution. Highlights: > Mol% of prepared Ce-La oxides did not follow that of reactant mol%. > Complex reaction pathway found to be dependent on metal solution concentrations. > At certain concentrations core shell particles were found to form. > A reaction model was produced based on cationic solubility. > Report lanthana solubility higher than previously reported in CeO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

QM/MM investigation of the concentration effects on the second-order nonlinear optical responses of solutions

A multiscale approach combining quantum mechanics (QM) and molecular mechanics methods has been employed to investigate the effects of solute-solute interactions and therefore of concentration on the first hyperpolarizability of solutions of nitrobenzene in benzene. First, spatial distributions of solute and solvent molecules are generated using Monte Carlo simulations where the intermolecular interactions are described using the Lennard-Jones potentials and Coulomb terms. Then, a reduced number of statistically-uncorrelated configurations are sampled and submitted to time-dependent Hartree-Fock calculations of the first hyperpolarizability. When only one molecule is described quantum-mechanically and is embedded in the electrostatic polarization field of the solution described by point charges, β{sub HRS} and β{sub //} as well as the depolarization ratio increase in parallel with the concentration in nitrobenzene. This effect is attributed to the increase of the polarization field associated with the presence of polar nitrobenzene molecules in the surrounding. Then, the first solvation shell is considered explicitly in the QM calculation to address solute-solute interactions effects. When the number of nitrobenzenes in the first solvation shell increases, β{sub HRS} and β{sub //} normalized to the number of nitrobenzene molecules decrease and this decrease attains roughly 50% when there are 3 nitrobenzene molecules in the first solvation shell. These drastic reductions of the first hyperpolarizability result from (partial) centro-symmetric arrangements between the nitrobenzene molecules, as supported by the relationship between β and the angle between the nitrobenzene charge transfer axes. Moreover, these β decreases originate mostly from the reduction of the dipolar β component, whereas the octupolar one is rather constant as a function of the nitrobenzene concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asymptotically AdS{sub 3} solutions to topologically massive gravity at special values of the coupling constants

We study exact solutions to cosmological topologically massive gravity coupled to topologically massive electrodynamics at special values of the coupling constants. For the particular case of the so-called chiral point l{mu}{sub G}=1, vacuum solutions (with vanishing gauge field) are exhibited. These correspond to a one-parameter deformation of general relativity solutions, and are continuously connected to the extremal Banados-Teitelboim-Zanelli black hole with bare constants J=-lM. At the chiral point this extremal Banados-Teitelboim-Zanelli black hole turns out to be massless, and thus it can be regarded as a kind of ground state. Although the solution is not asymptotically AdS{sub 3} in the sense of Brown-Henneaux boundary conditions, it does obey the weakened asymptotic recently proposed by Grumiller and Johansson. Consequently, we discuss the holographic computation of the conserved charges in terms of the stress tensor in the boundary. For the case where the coupling constants satisfy the relation l{mu}{sub G}=1+2l{mu}{sub E}, electrically charged analogues to these solutions exist. These solutions are asymptotically AdS{sub 3} in the strongest sense, and correspond to a logarithmic branch of self-dual solutions previously discussed in the literature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Instanton solutions mediating tunneling between the degenerate vacua in curved space

We investigate the instanton solution between the degenerate vacua in curved space. We show that there exist O(4)-symmetric solutions not only in de Sitter but also in both flat and anti-de Sitter space. The geometry of the new type of solutions is finite and preserves the Z{sub 2} symmetry. The nontrivial solution corresponding to the tunneling is possible only if gravity is taken into account. The numerical solutions as well as the analytic computations using the thin-wall approximation are presented. We expect that these solutions do not have any negative mode as in the instanton solution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Conservative solute transport processes and associated transient storage mechanisms: Comparing streams with contrasting channel morphologies, land use and land cover

Abstract Land use within a watershed impacts stream channel morphology and hydrology and, therefore, in‐stream solute transport processes and associated transient storage mechanisms. This study evaluated transport processes in two contrasting stream sites where channel morphology was influenced by the surrounding land use, land cover, climate and geologic controls: Como Creek, CO, a relatively undisturbed, high gradient, forested stream with a gravel bed and complex channel morphology, and Clear Creek, IA, an incised, low‐gradient stream with low‐permeability substrate draining an agricultural landscape. We performed conservative stream tracer injections at these sites to address the following questions: (1) How does solute transport vary between streams with differing morphologies? and (2) How does solute transport at each stream site change as a function of discharge? We analysed in‐stream tracer time series data and compared results quantifying solute attenuation in surface and subsurface transient storage zones. Significant trends were observed in these metrics with varying discharge conditions at the forested site but not at the agricultural site. There was a broad range of transport mechanisms and evidence of substantial exchange with both surface and hyporheic transient storage in the relatively undisturbed, forested stream. Changing discharge conditions activated or deactivated different solute transport mechanisms in the forested site and greatly impacted advective travel time. Conversely in the simplified agricultural stream, there was a narrow range of solute transport behaviour across flows and predominantly surface transient storage at all measured discharge conditions. These results demonstrate how channel simplification inhibits available solute transport mechanisms across varying discharge conditions.

54 ENVIRONMENTAL SCIENCES↗

Effect of Solution Heating Rate on Quasi-static and Dynamic Mechanical Properties of Al-Mg-Si-Cu Alloy

The effect of solution heating rate on quasi-static and dynamic mechanical properties of Al-Mg-Si-Cu alloy in bake hardening state was investigated through mechanical properties, microstructure and fracture morphology characterization in the present study. The results show that solution heating rate has a strong influence on microstructure, quasi-static and dynamic mechanical properties. As solution heating rate rises, the grain microstructure transforms from the elongated grains to equiaxed grains and the fraction of low-angle grain boundaries (LAGBs) also decreases. Moreover, the equivalent average grain size first decreases, and then increases. The relationship between solution heating rate and mechanical property is monotonic, not depending on strain rate. As solution heating rate rises, the yield strength, ultimate tensile strength and elongation decrease. In contrast to quasi-static loading, dynamic loading always tends to improve strengths and elongation. In addition, compared with the quasi-static tensile specimens, the dynamic tensile specimens possess a larger number of dislocations. Regardless of strain rate and solution heating rate, all the tensile specimens exhibit the ductile fracture mode. As solution rate rises, the dimples decrease and become shallow gradually. The dimples in dynamic fracture zone are larger and deeper than those in the quasi-static fracture zone.

36 MATERIALS SCIENCE↗

Influence of calcium ion in concrete pore solution on the passivation of galvanized steel bars

The addition of supplementary cementitious materials may affect the Ca{sup 2+} concentration and pH value of the concrete pore solutions. This work studied the influence of the calcium ion on the passivation of the galvanized steel bars in simulated concrete pore solutions with relatively low pH value of 12.5 and 13.15. The results showed that continuous protective layers were formed on the galvanized coating in the solutions with saturated Ca(OH){sub 2} at pH 12.5 and solutions with either KOH or NaOH at pH 13.15. The passive film formed in the saturated Ca(OH){sub 2} solution showed better protective properties than those in other solutions. In the solutions with lower concentrations of Ca{sup 2+} at pH 12.5, there was no obvious reaction and no protective layer was formed on the surface.

36 MATERIALS SCIENCE↗

Energetics of hydroxylbastnäsite solid solutions, La 1-$\chi$ Nd $\chi$ CO 3 OH

Bastnäsites (LnCO 3 (F,OH)) are a group of common rare earth elements (REE)-bearing minerals and are one of the primary global sources of REE. Due to the chemical similarities among REE, bastnӓsites tend to occur as solid solutions instead of end members in REE containing ores. To better understand the processes and the mechanisms of formation of such deposits, it is essential to determine the thermodynamic properties of bastnӓsites, including hydroxylbastnӓsite (LnCO 3 OH) solid solutions. In this work, we performed detailed structural and calorimetric investigations on synthetic hexagonal La–Nd hydroxylbastnӓsite (La 1-$\chi$ NdCO 3 OH, $\chi$ = 0, 0.25, 0.5, 0.75, 1) solid solutions. X-ray diffraction confirms the crystal structure of the solid solution series in the $\ P$6 space group, and pair distribution function (PDF) analysis reveals local bonding environments characterized by three different types of 9-coordinated metal-oxygen polyhedra. Unit cell parameters of La1–xNdxCO3OH exhibit a nearly linear relation with the Nd content x, suggesting a random distribution of La and Nd in the structure. Their standard enthalpies of formation (Δ$\ H$° f ) were determined by high temperature oxide melt drop solution calorimetry, from which the enthalpies of mixing (Δ$\ H$ mix ) were derived. The Δ$\ H$ mix can be fitted by a regular solution model with an interaction parameter of 12.58 ± 0.16 kJ/mol, suggesting enthalpic metastability of La1–xNdxCO3OH relative to the two endmembers. Combining entropy and enthalpy, we further estimated the Gibbs free energies of mixing (Δ$\ G$ mix ) at relevant temperatures, revealing favorable temperatures under which the intermediate La 1-$\chi$ NdCO 3 OH phases can be stabilized. Such entropy-driven stabilization, as is consistent with our geochemical modeling results, may explain the enhancement of thermal stability of the solid solutions in nature. Additionally, the temperature range constrained from this study may be used to estimate the thermal history of REE bastnӓsite deposit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Validating continuum theory for Cottrell atmosphere solute drag by molecular dynamics simulations

When a dislocation moves through a field of mobile solute atoms, solutes segregate to the dislocation and form Cottrell atmospheres which exert solute drag forces. Over the last 70 years, continuum theory has been used extensively to estimate these drag forces and their dependence on the dislocation velocity, however few prior works have validated the accuracy of continuum theories. Here, in this work, molecular dynamics (MD) simulations of dislocation motion in face-centered cubic Ni containing interstitial H atoms were performed in order to test the accuracy of continuum theory predictions. Our results demonstrate that continuum theory provides an accurate estimate of the solute drag force for velocities below the critical velocity at which the solute drag force is maximized. Above the critical velocity, continuum theory systematically deviates from MD. Additional analysis reveals that this deviation results from the multi-valued and unstable nature of solute drag under load control, and also from the transition to random solute drag which occurs at high velocities.

Dislocations↗

High figure of merit and thermoelectric properties of Bi-doped Mg{sub 2}Si{sub 0.4}Sn{sub 0.6} solid solutions

The study of Mg{sub 2}Si{sub 1−x}Sn{sub x}-based thermoelectric materials has received widespread attention due to a potentially high thermoelectric performance, abundant raw materials, relatively low cost of modules, and non-toxic character of compounds. In this research, Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} solid solutions with the nominal Bi content of 0≤y≤0.03 are prepared using a two-step solid state reaction followed by spark plasma sintering consolidation. Within this range of Bi concentrations, no evidence of second phase segregation was found. Bi is confirmed to occupy the Si/Sn sites in the crystal lattice and behaves as an efficient n-type dopant in Mg{sub 2}Si{sub 0.4}Sn{sub 0.6}. Similar to the effect of Sb, Bi doping greatly increases the electron density and the power factor, and reduces the lattice thermal conductivity of Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} solid solutions. Overall, the thermoelectric figure of merit of Bi-doped Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} solid solutions is improved by about 10% in comparison to values obtained with Sb-doped materials of comparable dopant content. This improvement comes chiefly from a marginally higher Seebeck coefficient of Bi-doped solid solutions. The highest ZT∼1.4 is achieved for the y=0.03 composition at 800 K. - Graphical abstract: (a)The relationship between electrical conductivity and power factor for Sb/Bi-doped Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}(Sb/Bi){sub y} (0<y≤0.03) solid solutions. (b)The correlation between temperature and the combination of the lattice and the bipolar terms of thermal conductivity of Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} (0≤y≤0.03) solid solutions. (c)Temperature dependent dimensionless figure of merit ZT of Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 1−y}Bi{sub y} (0≤y≤0.03) solid solutions. - Highlights: • Bi doped Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} showed 15% enhancement in the power factor as compared to Sb doped samples. • Bi doping reduced κ{sub ph} of Mg{sub 2.16}Si{sub 0.4}Sn{sub 0.6} due to stronger point defect scattering. • The highest ZT=1.4 at 800 K was achieved for Mg{sub 2.16}(Si{sub 0.4}Sn{sub 0.6}){sub 0.97}Bi{sub 0.03}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Ag{sub 2}Sb{sub 2}O{sub 6} to Cd{sub 2}Sb{sub 2}O{sub 7}: Investigations on an anion-deficient to ideal pyrochlore solid solution

A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized through the standard solid state ceramic method. Each composition has been characterized by various different techniques, including powder X-ray diffraction, optical spectroscopy, electron paramagnetic resonance and {sup 121}Sb Mössbauer spectroscopy. Computational methods based on density functional theory complement this investigation. Photocatalytic activity has been studied, and transport properties have been measured on pellets densified by spark plasma sintering. The analysis of the data collected from these various techniques enables a comprehensive characterization of the complete solid solution and revealed an anomalous behavior in the Cd-rich end of the solid solution, which has been proposed to arise from a possible radical O{sup −} species in small concentrations. - Graphical abstract: A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized and investigated through various techniques including X-ray diffraction, electron paramagnetic spectroscopy, and {sup 121}Sb-Mössbauer spectroscopy. Optical and electrical measurements have been performed, and computational methods have been applied to determine the density of states. Photocatalytic activity was monitored by the degradation of Methylene Blue, and upon cadmium substitution, the degradation amount decreased, which is attributed primarily to the changing optical and electrical properties of the solid solution. Display Omitted - Highlights: • A complete solid solution between Ag{sub 2}Sb{sub 2}O{sub 6} and Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized. • XRD reveals a relatively constant lattice parameter as the series progresses. • Optical and electrical properties have been measured for the solid solution. • Computational methods have been used to determine the density of states. • Photocatalytic degradation of Methylene Blue decreased upon cadmium substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of solution annealing temperature on precipitation in 2205 duplex stainless steel

In the present study, effect of solution annealing temperature (1050 Degree-Sign C and 1100 Degree-Sign C) and isothermal ageing (700 Degree-Sign C: 15 min to 6 h) on the microstructural changes in 2205 duplex stainless steel has been investigated systematically. Scanning electron microscopy and X-ray diffraction were adopted to follow the microstructural evolution, while an energy dispersive spectrometer attached to scanning electron microscope was used to obtain localised chemical information of various phases. The ferritic matrix of the two phase 2205 duplex stainless steel ({approx} 45% ferrite and {approx} 55% austenite) undergoes a series of metallurgical transformations during ageing-formation of secondary austenite ({gamma}{sub 2}) and precipitation of Cr and Mo rich intermetallic (chi-{chi} and sigma-{sigma}) phases. For solution annealing at 1050 Degree-Sign C, significant amount of carbides were observed in the ferrite grains after 1 h of ageing at 700 Degree-Sign C. {chi} Phase precipitated after the precipitation of carbides-preferentially at the ferrite-ferrite and also at the ferrite-austenite boundaries. {sigma} Phase was not observed in significant quantity even after 6 h of ageing. The sequence of precipitation in samples solution annealed at 1050 Degree-Sign C was found to be carbides {yields} {chi} {yields} {sigma}. On the contrary, for samples solution annealed at 1100 Degree-Sign C, the precipitation of {chi} phase was negligible. {chi} Phase precipitated before {sigma} phase, preferentially along the ferrite-ferrite grain boundaries and was later consumed in the {sigma} phase precipitation. The {sigma} phase precipitated via the eutectoid transformation of ferrite to yield secondary austenite {gamma}{sub 2} and {sigma} phase in the ferrite and along the ferrite-austenite grain boundaries. An increase in the volume fraction of {gamma}{sub 2} and {sigma} phase with simultaneous decrease in the ferrite was evidenced with ageing. - Highlights: Black-Right-Pointing-Pointer Effect of solution annealing temperature on microstructural evolution is studied. Black-Right-Pointing-Pointer {chi} Phase precipitated preferentially in the samples solution annealed at 1050 Degree-Sign C. Black-Right-Pointing-Pointer {sigma} Phase precipitated preferentially in the samples solution annealed at 1100 Degree-Sign C. Black-Right-Pointing-Pointer For SA at 1050 Degree-Sign C, the sequence of precipitation was carbides {yields} {chi} phase {yields} {sigma} phase. Black-Right-Pointing-Pointer For SA at 1100 Degree-Sign C, {sigma} phase precipitated via the eutectoid reaction: ferrite (F) {yields} {sigma} + {gamma}{sub 2}.

36 MATERIALS SCIENCE↗