SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The restricted problem of three bodies in sidereal coordinates is investigated using Lie theoretical methods of extended groups. The application of the theory results in a single scalar generator with an associated invariant - the integral of the motion attributed to Jacobi.
Absorption of electromagnetic waves by rotational transitions of molecules is formulated for the case in which the wave frequency is displaced from resonance by an amount large compared to the reciprocal duration of a typical binary collision, and also large compared to the differences between frequencies of the strong resonances of the gas. In this far-wing limit, Fano's relaxation operator is reduced to a scalar parameter which depends on the frequency displacement. This relaxation parameter is not symmetric with respect to reflection about resonance, but becomes symmetric when multiplied by the factor exp (h/2pi) (omega sub d)/2kT where omega sub d is the frequency displacement. The theory applies to dipolar molecules of any shape, in collisions with either dipolar or quadrupolar molecules.
Three different implicit operators in a numerical method for solving the two-dimensional steady Euler equations using flux vector splitting are investigated. These include the implementation of the true Jacobian matrices in the implicit part, the use of their splitting approximate form, and a modification of the implicit part of the scheme that uses the scalar form of the implicit part based on the spectral radii of the split Jacobian matrices. The three versions of the basic algorithm are compared with the results given by two common numerical methods using several two-dimensional test cases. Special attention is paid to the quality of results as well as computational efficiency and convergence properties.
High-order (p-type) finite element methods combine the geometric flexibility of standard low-order finite element (or finite volume) techniques with the rapid convergence properties of spectral methods. Various p-type schemes have been proposed for elliptic problems. However, an application of p-type methods to more complex equations, in particular the passive scalar or Navier-Stokes equations, is complicated by the nature of the equations and by efficiency considerations as regards the solution procedure. Patera (1984) has proposed a p-type method for the Navier-Stokes equations, taking into account the arising additional complications. The present study is concerned with an isoparametric spectral element discretization for the solution of flow problems in fully general, curvy geometries. Attention is given to the isoparametric formulation for elliptic equations and a time-splitting scheme for the Navier-Stokes equations.
Issues affecting the fidelity of real-time digital simulation are discussed and a scalar measure of fidelity is derived which reflects the end-to-end dynamics of a given simulator. A class of explicit linear multistep discrete integration formulae are developed which are optimal with respect to the fidelity measure for a given simulation configuration. A computational algorithm is given for calculating the parameters associated with the optimal formulae.
Initial boundary value problems for the general scalar singularly perturbed parabolic equation in a cylindrical domain are studied. The one-dimensional reaction-diffusion equation is considered in the absence of convection. Then, the general one-dimensional and N-dimensional reaction-convection-diffusion equations are analyzed.
A small but interesting class of optimal control problems featuring a scalar control appearing linearly is equivalent to the class of identically nonregular problems in the Calculus of Variations. It is shown that a condition due to Mancill (1950) is equivalent to the generalized Legendre-Clebsch condition for this narrow class of problems.
Electromagnetic scattering theory is discussed with emphasis on the general stochastic variational principle (SVP) and its applications. The stochastic version of the Schwinger-type variational principle is presented, and explicit expressions for its integrals are considered. Results are summarized for scalar wave scattering from a classic rough-surface model and for vector wave scattering from a random dielectric-body model. Also considered are the selection of trial functions and the variational improvement of the Kirchhoff short-wave approximation appropriate to large size-parameters. Other applications of vector field theory discussed include a general vision theory and the analysis of hydromagnetism induced by ocean motion across the geomagnetic field. Levitational force-torque in the magnetic suspension of the disturbance compensation system (DISCOS), now deployed in NOVA satellites, is also analyzed using the developed theory.
Axion photoproduction is suggested as a systematic technique for investigating the coupling of new elementary pseudoscalar or scalar particles in the megaelectronvolt mass range to leptons, photons, and hadronic matter. The experiments involve a configuration where a low-energy photon collides with a relativistic electron beam. Threshold production energies of 300 GeV can be accomplished with an optical laser, and those of 14.5-50 GeV can be achieved with wigglers directed onto an electron beam. With this scheme, at least 10 to the -7th of the electrons can be converted to axions, providing a 1-100 thousand/s relativistic beam of axions.
Scalar and vector Magsat anomalies over the west African craton are analyzed by forward and inverse models. A forward model of the Man shield is based on Liberia. Induced magnetization contrasts due to sporadic iron-formations and to regional metamorphic rocks, and a contrast in remanent magnetization within the lower crust are included. This combination reproduces the location, magnitude and adopted local zero level of anomalies in the initial Magsat maps. An inverse model of the Reguibat shield estimates the magnetization contrast of its lithosphere, and when magnetism is restricted to shallower than 75 km both shields can be represented by a susceptibility contrast of +0.02. A residual anomaly between the shields involves a relative deficiency of induced magnetization along with other causes.
The general capabilities and the hardware environment of an interactive color graphical postprocessor for three-dimensional numerical analysis are described as well as the synergistic influence of this aspect of interactive graphics on the research environment. Areas of practical concern include finite element analysis, fracture propagation, surface and framed structures. The interactive color graphical postprocessor, POSTPRO3D, is capable of displaying the scalar, vector, and tensor results of finite difference, finite element, and boundary element analysis. In the case of fatigue cracking in steel crane-rail girders, it was shown that POSTPRO3D offers a high level of flexibility, interactivity and features which minimize response time.
A hot-wire concentration probe with a spatial resolution of 0.13 mm is used to measure concentration in a model cylindrical combustor. The flow inside the combustor is simulated by injecting a helium jet into a cylindrical confinement with or without swirling air flow present. Mean concentrations are essentially zero outside of the jet region, indicating complete confinement of the scalar field by the swirling flow. Consequently, concentration fluctuations are found to be relatively weak compared to velocity fluctuations, and are maximum off-axis at a point which corresponds to the interface between helium and air flows. However, in the absence of a swirling air flow, the helium diffuses quickly to fill the combustor. The resulting helium concentrations are constant and do not resemble the jet-like behavior of the velocity field.
Certain difficulties arise in connection with the development of models for the prediction of turbulent flow characteristics. The present paper is mainly concerned with an approach which provides an aid in such development work by making it possible to test Reynolds average turbulence models. This approach is based on full and large eddy simulations of turbulent flows. Attention is given to details regarding Reynolds average turbulence models, mixing length models, two equation (k-epsilon) models, Reynolds stress models, and passive scalars. It is shown that a great deal about modeling can be learned from simulations of turbulent flows. There is reason to believe that these results will lead to improvements in the quality of predictions of turbulent flows.
Aspects of global observability (GO) for some standard examples of chaotic systems are considered, the underlying philosophy being that such systems should be easy to observe and should be observed by large classes of scalar functions. Consideration is given to GO for piecewise monotone maps of the interval (a standard example of a chaotic system). Attention is then given to GO for ergodic translations on compact (metrizable) topological groups; the most familiar examples are the irrational translation flows on the n-torus.
This paper describes an algorithm for the high accuracy computation of some statistical quantities of the magnitude of a random trajectory correction maneuver (TCM). The trajectory correction velocity increment Delta V is assumed to be a three-component random vector with each component being a normally distributed random scalar having a possibly nonzero mean. Knowledge of the statitiscal properties of the magnitude of a random TCM is important in the planning and execution of maneuver strategies for deep-space missions such as Galileo. The current algorithm involves the numerical integration of a set of differential equations. This approach allows the computation of density functions for specific Delta V magnitude distributions to high accuracy without first having to generate large numbers of random samples. Possible applications of the algorithm to maneuver planning, planetary quarantine evaluation, and guidance success probability calculations are described.
The MacCormack implicit predictor-corrector model (1981) for numerical solution of the coupled Navier-Stokes equations for turbulent flows is extended to nonconservative multiequation turbulence models, as well as the inclusion of second-order Reynolds stress turbulence closure. A scalar effective pressure turbulent contribution to the pressure field is defined to approximate the effects of the Reynolds stress in strongly sheared flows. The Jacobian matrices of the transport equations are diagonalized to reduce the required computer memory and run time. Techniques are defined for including turbulence in the diagonalization. Application of the method is demonstrated with solutions generated for transonic nozzle flow and for the interaction between a supersonic flat plate boundary layer and a 12 deg compression-expansion ramp.
Viscous transonic flows at large Reynolds numbers over 3-D wings were analyzed using a zonal viscid-inviscid interaction approach. A new numerical AFZ scheme was developed in conjunction with the finite volume formulation for the solution of the inviscid full-potential equation. A special far-field asymptotic boundary condition was developed and a second-order artificial viscosity included for an improved inviscid solution methodology. The integral method was used for the laminar/turbulent boundary layer and 3-D viscous wake calculation. The interaction calculation included the coupling conditions of the source flux due to the wing surface boundary layer, the flux jump due to the viscous wake, and the wake curvature effect. A method was also devised incorporating the 2-D trailing edge strong interaction solution for the normal pressure correction near the trailing edge region. A fully automated computer program was developed to perform the proposed method with one scalar version to be used on an IBM-3081 and two vectorized versions on Cray-1 and Cyber-205 computers.
Continued study of the lidar data collected in 1981 has resulted in significant new improvements in the analysis techniques reported by Bluestein et al. (1985) and McCaul (1985). Through comparison of fore- and aft-derived scalar fields of intensity and spectral width, the self-consistency of the lidar moment estimates was assessed. Reflectivity estimates were found to be quite stable and reliable, while spectral widths were prone to become noisy if signal to noise ratio (SNR) fell below 12 dB. In addition, spectral widths contained a significant component due to radial velocity gradients in areas along gust fronts, and these components were different along the fore and aft lines of sight. Significant improvement in agreement between the fore and aft fields of spectral width was obtained by estimating the radial velocity gradient component and then removing it from the raw measured widths to yield only the turbulent portion of the contribution to width. Additional analyses showed that lidar-derived vorticity estimates were consistent with several approximate models of vorticity growth along gust front zones, and with the hypothesis that Helmholtz instability could have been responsible for vortices seen along part of the gust front of 30 June 1981. Computations of divergence transverse to axes through an isolated cumulus congestus indicated that the strongest convergence tended to lie along an axis parallel to the congestus. This and the results of other additional analyses seem to suggest that the lidar winds do indeed accurately reflected the basic features of the real wind field.