Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Tuning the magnetic properties of Zn1-xCoxO films

We compare the magnetic properties of two types of Co-doped ZnO films grown on sapphire with distinct structural quality. SQUID magnetometry as well as element-specific synchrotron studies reveal pure paramagnetic behavior for the samples with the highest structural quality, whereas samples with reduced structural quality exhibit superparamagnetic blocking behavior. In this sample signatures of phase separation are detected by X-ray diffraction and X-ray linear dichroism which accounts for the superparamagnetic blocking.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of temperature on ZnO hybrids grown by metal-organic chemical vapor deposition

The growth of three-dimensional ZnO hybrid structures by metal-organic chemical vapor deposition was controlled through their growth pressure and temperature. Vertically aligned ZnO nanorods were grown on c-plane of sapphire substrate at 600 °C and 400 Torr. ZnO film was then formed in situ on the ZnO nanorods at 100, 600, and 700 °C and 10 Torr. High-resolution X-ray diffraction measurements showed that the ZnO film on the nanorods/sapphire grew epitaxially, and that the ZnO film/nanorods hybrid structures had well-ordered wurtzite structures. The hybrid ZnO structure was shown to be about 3–5 μm by field-emission scanning electron microscopy. The hybrid formed at 600 °C showed better crystalline quality those formed at 100 °C or 700 °C. These structures have potential applicability as nanobuilding blocks in nanodevices.

36 MATERIALS SCIENCE↗

Characterization of VPS-W coating layers on molybdenum after heat exposure

Graphical abstract: - Highlights: • W powders were successfully coated on molybdenum using VPS coating technique. • W powders were completely changed into recrystallized grains after heat exposure. • VPS-W coating layer shows good adhesion to the Mo substrate after heat exposure due to the interdiffusion between W and Mo. • W-coated Mo material will extend the service life of hot-zone parts for high-temperature furnace applications. - Abstract: Tungsten (W) coating layers were successfully deposited using a vacuum plasma spraying (VPS) technique on a molybdenum (Mo) substrate. Tungsten powder with a median size of 10 μm was applied to prepare coatings via a plasma spray system. For the VPS process, argon and hydrogen were used as plasma-forming gases, and the coatings were deposited in 35 mbar vacuum pressure. A coating with a thickness of 300 μm was obtained, and some unmelted W powders were observed in the coating layer. This heat exposure experiment was performed in a sapphire crystal growing furnace at 2100 °C up to 110 h. After heat exposure, the VPS-W coating layers were soundly bonded with the Mo substrate due to the interdiffusion between W and Mo.

36 MATERIALS SCIENCE↗

Charge transfer and optical properties of wurtzite-type ZnS/(CdS/ZnS){sub n} (n = 2, 4, 8) superlattices

Graphical abstract: (a) Normalized temperature-dependent PL spectra of ZnS/(CdS/ZnS){sub 4} superlattices from 5 to 300 K and (b) schematic of charge transfer at CdS/ZnS interface. - Highlights: • Wurtzite ZnS/(CdS/ZnS){sub n} superlattices were prepared at 100 °C by pulsed laser deposition. • Surface phonon of ZnS and multiple phonons modes of ZnS and CdS were observed. • The charge transfer of electrons from CdS electron to ZnS holes by excitation energy was found. - Abstract: ZnS/(CdS/ZnS){sub n} (n = 2, 4, 8) superlattices were deposited on sapphire substrate by pulsed laser deposition (PLD) with alternate cadmium sulfide (CdS) and zinc sulfide (ZnS) crystals at 100 °C. The prepared samples with an average thickness of ∼30 nm for ZnS layer and ∼60 nm for CdS layer have a wurtzite-type structure. Surface phonon of ZnS and multiple phonons modes for ZnS and CdS were observed from Raman spectra. PL spectra show a strong green emission at ∼496 nm, two weak emission bands at ∼400 and ∼577 nm, where the emission band at 400 nm was attributed to the recombination of surface defects states to valence, the emission band at 577 nm as the recombination of Cd{sub i}–V{sub Cd} centers, and the strong emission at ∼496 nm is from the charge transfer of electrons from CdS electron to ZnS holes by excitation energy.

36 MATERIALS SCIENCE↗

Al-doped ZnO seed layer-dependent crystallographic control of ZnO nanorods by using electrochemical deposition

Highlights: • Polar and semipolar ZnO NRs were successfully achieved by hydrothermal synthesis. • Semipolar and polar ZnO NRs were grown on ZnO and AZO/m-sapphire, respectively. • Al % of AZO/m-sapphire enhanced the lateral growth rate of polar ZnO NRs. - Abstract: We investigated the effect of an Al-doped ZnO film on the crystallographic direction of ZnO nanorods (NRs) using electrochemical deposition. From high-solution X-ray diffraction measurements, the crystallographic plane of ZnO NRs grown on (1 0 0) ZnO/m-plane sapphire was (1 0 1). The surface grain size of the (100) Al-doped ZnO (AZO) film decreased with increasing Al content in the ZnO seed layer, implying that the Al dopant accelerated the three-dimensional (3D) growth of the AZO film. In addition, it was found that with increasing Al doping concentration of the AZO seed layer, the crystal orientation of the ZnO NRs grown on the AZO seed layer changed from [1 0 1] to [0 0 1]. With increasing Al content of the nonpolar (1 0 0) AZO seed layer, the small surface grains with a few crystallographic planes of the AZO film changed from semipolar (1 0 1) ZnO NRs to polar (0 0 1) ZnO NRs due to the increase of the vertical [0 0 1] growth rate of the ZnO NRs owing to excellent electrical properties.

36 MATERIALS SCIENCE↗

Modeling athermal phonons in novel materials using the G4CMP simulation toolkit

Understanding phonon and charge propagation in superconducting devices plays an important role in both performing low-threshold dark matter searches and limiting correlated errors in superconducting qubits. The Geant4 Condensed Matter Physics (G4CMP) package, originally developed for the Cryogenic Dark Matter Search (CDMS) experiment, models charge and phonon transport within silicon and germanium detectors and has been validated by experimental measurements of phonon caustics, mean charge-carrier drift velocities, and heat pulse propagation times. Here, in this work, we present a concise framework for expanding the capabilities for phonon transport to a number of other novel substrate materials of interest to the dark matter and quantum computing communities, including sapphire (Al 2 O 3 ), gallium arsenide (GaAs), lithium fluoride (LiF), calcium tungstate (CaWO 4 ), and calcium fluoride (CaF 2 ). We demonstrate the use of this framework in generating phonon transport properties of these materials and compare these properties with experimentally-determined values where available.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A resonant ionization laser ion source at ORNL

We report that multi-step resonance laser ionization has become an essential tool for the production of isobarically pure radioactive ion beams at the isotope separator on-line (ISOL) facilities around the world. A resonant ionization laser ion source (RILIS) has been developed for the former Holifield Radioactive Ion Beam Facility (HRIBF) of Oak Ridge National Laboratory. The RILIS employs a hot-cavity ion source and a laser system featuring three grating-tuned and individually pumped Ti:Sapphire lasers, especially designed for stable and simple operation. The RILIS has been installed at the second ISOL production platform of former HRIBF and has successfully provided beams of exotic neutron-rich Ga isotopes for beta decay studies. Here, this paper reports the features, advantages, limitations, and on-line and off-line performance of the RILIS.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High efficiency resonance ionization of thorium

Here, multi-step resonance ionization spectroscopy of thorium has been performed with Ti:Sapphire lasers and a hot-cavity laser ion source. Resonance ionization schemes involving three-color, three-photon ionization processes are evaluated and a new three-photon scheme is demonstrated with measured overall ionization efficiency of 38.6(5)%. This high efficiency makes it possible to determine the thorium impurities in materials used for ultra-low background neutrino detectors and could also benefit ultra-trace thorium analysis using resonance ionization mass spectrometry for various radiochemical tracer applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Integrated Experimental and Modeling Study of Ionic Conductivity of Scandia-Stabilized Zirconia Thin Films

Scandia-stabilized zirconia films were epitaxially grown on sapphire (0001) substrates by oxygen-plasma-assisted molecular beam epitaxy. The cubic phase was found to exist over a wider dopant concentration range than previously observed (4.6-17.6 mol% Sc2O3). The monoclinic phase was observed for dopant concentrations of 1.5 mol% and 22.5 mol %. An increase in the fraction of the monoclinic phase relative to the cubic phase decreased the ionic conductivity. The highest conductivity in the temperature range of 460-900 °C was observed for 9.9 mol % Sc2O3. Atomistic computer simulations show that the observed composition dependence can be related to changes in migration barriers for O2- ion transport with Sc3+ substitution of Zr4+ ions.

36 MATERIALS SCIENCE↗

Heteroepitaxial Silicon Film Growth at 600 °C from an Al–Si Eutectic Melt

A method for growing heteroepitaxial Si films on sapphire was developed using a 6 nm thin Al layer at substrate temperature of 600 C. Subsequently, the growth of Si nanowires was demonstrated on these films at 490 C without breaking vacuum. We characterized the properties of the Si films by Raman scattering, X-ray diffraction and transmission electron microscopy and show that the crystal quality and dopant control are promising for photovoltaic applications.

36 MATERIALS SCIENCE↗

Mechanical characterization of Lipon films using nanoindentation

Nanoindentation has been used to characterize the elastic modulus and hardness of LiPON films ranging in thickness from 1 to 10 m. Four fully dense, amorphous films were deposited on glass and sapphire substrates with one film annealed at 200 C for 20 min. The modulus of LiPON is found to be approximately 77 GPa, and argued to be independent of the substrate type, film thickness, and annealing. Based on the numerical analysis of Monroe and Newman, this value may be sufficiently high to mechanically suppress dendrite formation at the lithium/LiPON interface in thin film batteries [1]. Using Sneddon's stiffness equation and assuming the modulus is 77 GPa, the hardness is found to be approximately 3.9 GPa for all but the annealed film. The hardness of the annealed film is approximately 5% higher, at 4.1 GPa. Atomic force microscopy images of the residual hardness impressions confirm the unexpected increase in hardness of the annealed film. Surprisingly, the indentation data also reveal time-dependent behavior in all four films. This indicates that creep may also play a significant role in determining how LiPON responds to complex loading conditions and could be important in relieving stresses as they develop during service.

36 MATERIALS SCIENCE↗

Origin of Electrical Property Deterioration with Increasing Mg Concentration in ZnMgO:Ga

Transparent conductive Ga-doped Zn{sub 1-x}Mg{sub x}O (ZnMgO:Ga) films were epitaxially grown via Pulsed Laser Deposition on sapphire by optimizing the substrate temperature and other parameters of deposition. Zn{sub 0.68}Mg{sub 0.31}Ga{sub 0.01}O/sapphire films deposited at 400 C have a Hall mobility ({mu}) of 9.2 {+-} 0.5 cm{sup 2} V{sup -1} s{sup -1} and a free electron density (n) of 1.79 x 10{sup 20} {+-} 0.06 x 10{sup 20} cm{sup -3}, yielding an electrical conductivity ({sigma}) = 262 {+-} 22 S/cm. Zn{sub 0.90}Mg{sub 0.09}Ga{sub 0.01}O/sapphire films, deposited under the same growth conditions, have similar crystalline quality, but significantly better electrical properties ({sigma} = 1450 {+-} 10 S/cm, {mu} = 24.5 {+-} 2.5 cm{sup 2} V{sup -1} s{sup -1}, n = 3.81 x 10{sup 20} {+-} 0.20 x 10{sup 20} cm{sup -3}). This comparison provides evidence of electrical property deterioration in doped ZnMgO bulk material with increasing Mg content, independent of crystalline quality. Electrical properties of ZnMgO:Ga are further deteriorated by the decrease of the crystalline quality. Polycrystalline Zn{sub 0.90}Mg{sub 0.09}Ga{sub 0.01}O/a-SiO{sub 2} samples deposited under identical conditions on amorphous silica substrates had both inferior crystal quality and inferior transport properties ({mu} = 2.5 {+-} 0.2 cm{sup 2} V{sup -1} s{sup -1}, n = 2.04 x 10{sup 20} {+-} 0.20 x 10{sup 20} cm{sup -3}, {sigma} = 80 {+-} 8 S/cm) compared to their epitaxial counterparts. Overall, the results of this study indicate that both bulk material properties and crystalline quality influence the electrical properties of single-phase ZnMgO:Ga thin films.

14 SOLAR ENERGY↗

Epitaxial growth of NiTiO3 with a distorted ilmenite structure

MTiO3 (M = Fe, Mn, Ni) compounds have received recent attention as possible candidates for new multiferroic materials capable of magnetization switching by application of an electric field. Epitaxial Ni1-xTi1-yO3 films of different thickness and composition were deposited on Al2O3(0001) by pulsed laser deposition, and characterized using several techniques. Structural parameters for the metastable LiNbO3-type NiTiO3 structure with the space group R3c were predicted using density functional theory calculations, and compared with the experimental results. Our structural data from x-ray diffraction and x-ray absorption spectroscopy indicate that epitaxial ilmenite-type NiTiO3 films were successfully grown. Furthermore, lattice strain exerted by the sapphire substrate results in a distorted ilmenite structure similar to the LiNbO3-type one. Our results demonstrate the potential of oxide heteroepitaxy to stabilize metastable multiferroic phases that may be difficult to prepare or are inaccessible in the bulk.

36 MATERIALS SCIENCE↗

Structural and Electrocatalytic Studies of Pulsed Laser Deposited Epitaxial RuO 2 Thin Films

Two sets of high-quality epitaxial ruthenium oxide (RuO 2 ) thin films with different thicknesses were synthesized in situ on cost-competitive sapphire substrates by using a pulsed laser deposition technique. The first set of films, with a thickness of 40 nm and a sheet resistance of 15.7 Ω/□, was prepared using 2100 laser pulses, while the second set of films, with a thickness of 87 nm and a sheet resistance of 6.7 Ω/□, was prepared using 4800 laser pulses. All other deposition parameters were kept the same. The post-deposition structural and morphological measurements showed that both sets of films grew at the same growth rate, had the same crystallinity, similar grain boundary density, and slightly different surface roughness. The thicker RuO 2 films achieved an overpotential of 280 mV for the oxygen evolution reaction at a current density of 100 μA/cm 2 , comparable to or exceeding the performance of films grown on more expensive substrates. Comparatively, the thinner RuO 2 films, which have a significantly higher charge transfer resistance (250 Ω versus 100 Ω for thick films), display a higher overpotential of 320 mV. These results indicate that the lower electrical resistance of thicker films promotes charge transfer through the film body, leading to superior electrocatalytic properties.

charge-transfer↗

Electrical properties and deep traps spectra of N-polar and Ga-polar AlGaN films grown by molecular beam epitaxy in a wide composition range

The polarity type, surface morphology, electrical properties, and deep trap spectra were studied for undoped Al{sub x}Ga{sub 1-x}N films (x=0-0.6) grown by molecular beam epitaxy on on-axis (0001) sapphire using composite buffers consisting of low temperature (LT) AlN nucleation layer, AlN, and AlN/AlGaN superlattice. It is shown that the films grow with N-polarity if the LT AlN layer is deposited under N-rich conditions and with Ga-polarity for the LT AlN layers deposited under Al-rich conditions. For both polarities the film morphology was acceptable for fabrication of typical GaN-based devices. It is demonstrated that the Ga-polar AlGaN films are heavily compensated p-type, with the dominant acceptors believed to be due to C. N-polar films are n type, with the residual donors pinning the Fermi level being most likely due to Si. N-polar films show a high concentration of deep electron traps.

36 MATERIALS SCIENCE↗

The metal-insulator transition in vanadium dioxide: A view at bulk and surface contributions for thin films and the effect of annealing

Vanadium dioxide is investigated as potential oxide barrier in spin switches, and in order to incorporate VO{sub 2} layers in complex multilayer devices, it is necessary to understand the relation between bulk and surface/interface properties. Highly oriented VO{sub 2} thin films were grown on (0001) sapphire single crystal substrates with reactive bias target ion beam deposition. In the analysis of the VO{sub 2} films, bulk-sensitive methods [x-ray diffraction (XRD) and transport measurements] and surface sensitive techniques [photoelectron spectroscopy (PES) and scanning tunneling microscopy and spectroscopy] were employed. The samples were subjected to heating cycles with annealing temperatures of up to 425 and 525 K. Prior to annealing the VO{sub 2} films exhibit the transition from the monoclinic to the tetragonal phase with the concurrent change in conductivity by more than a factor of 10{sup 3} and their phase purity is confirmed by XRD. Annealing to 425 K and thus cycling across the metal-insulator transition (MIT) temperature has no impact on the bulk properties of the VO{sub 2} film but the surface undergoes irreversible electronic changes. The observation of the valence band with PES during the annealing illustrates that the surface adopts a partially metallic character, which is retained after cooling. Annealing to a higher temperature (525 K) triggers a modification of the bulk, which is evidenced by a considerable reduction in the MIT characteristics, and a degradation in crystallite morphology. The local measurement of the conductivity with scanning tunneling spectroscopy shows the transition of the surface from predominantly semiconducting surface prior to annealing to a surface with an overwhelming contribution from metallic sections afterward. The spatial distribution of metallic regions cannot be linked in a unique manner to the crystallite size or location within the crystallites. The onset of oxygen depletion at the surface is held responsible for this behavior. The onset of bulk modification at higher temperatures is most likely linked to oxygen loss and effusion along the grain boundaries and concurrent onset of sintering. Our study focuses on the comparison of the MIT in the bulk and at the surface of thin VO{sub 2} layers and establishes an irreversible modification of the crystallite structure and surface for temperatures exceeding the MIT. The surface modification impacts on the strategies which will be employed to build the metallic contacts to VO{sub 2} layers.

36 MATERIALS SCIENCE↗

Temperature dependence of the optical properties of AlInN

Measurements of the temperature dependence of transmission have been carried out on AlInN thin films grown by reactive radio-frequency magnetron sputtering on (0001) sapphire substrates. By following a detailed procedure developed for analyzing the transmission spectra, we obtained more reliable data for the effects of temperature on the optical properties of AlInN. Two sets of temperature and photon-energy dependence of empirical formulas have been established for the absorption coefficient, bandgap, Urbach bandtail, and refractive index, which not only unify various experimental data reported in the literature but also provide a database of the optical properties of AlInN based on experimental results. It was found that the shift in the temperature dependence of the bandgap increases with the Al content and that the Urbach bandtail parameter is closely related to the structural characteristics of the AlInN thin films. These optical properties provide an experimental basis for further theoretical investigation and the design of AlInN-based devices.

36 MATERIALS SCIENCE↗

Effect of epitaxial strain on the magneto-electric coupling of YMnO{sub 3} thin films

We report synthesis of phase pure multiferroic YMnO{sub 3} thin films on sapphire (0001) with conducting ZnGaO buffer contact layer. Films were prepared by using pulsed laser deposition technique and characterized using x-ray diffraction, scanning electron microscopy, energy dispersive absorption spectroscopy, and magnetic field dependent dielectric measurement techniques. Structural characterizations indicated phase purity and epitaxial nature of the films. The dielectric response indicated an anomaly in dielectric constant epsilon and tan delta in the vicinity of 30 K, well below the bulk Neel temperature approx70 K. This anomaly in epsilon and tan delta and its magnetic field dependence is explained as an influence of strain due to lattice mismatch between the substrate and YMnO{sub 3} film. A substantial enhancement in magnetocapacitance was also observed for magnetic field applied parallel to ab plane of the film. Our results show that it is possible to tune the multiferroic property of YMnO{sub 3} via changes in ferroelastic route.

36 MATERIALS SCIENCE↗