Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Remote”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

The application of remote sensing to resource management and environmental quality programs in Kansas

Activities of the Kansas Applied Remote Sensing Program (KARS) designed to establish interactions on cooperative projects with decision makers in Kansas agencies in the development and application of remote sensing procedures are reported. Cooperative demonstration projects undertaken with several different agencies involved three principal areas of effort: Wildlife Habitat and Environmental Analysis; Urban and Regional Analysis; Agricultural and Rural Analysis. These projects were designed to concentrate remote sensing concepts and methodologies on existing agency problems to insure the continued relevancy of the program and maximize the possibility for immediate operational use. Completed projects are briefly discussed.

Barr, B. G.↗

Tug rendezvous and docking with a spacecraft - A remote manned approach

The development and use of a visual simulator for remote-manned rendezvous and docking utilizing frame-by-frame, slow-scan, low-light-level TV (LLLTV) was conceived and initiated in mid-1974. The effort was limited to modification, checkout, and validation of simulator hardware specific to this task, to the development of simulation (digital computer) software, and technical support to several rendezvous and docking simulation studies. Analysis and simulation has shown that LLLTV, such as would be required for satellite inspection, could provide a suitable acquisition sensor for a remote manned rendezvous/docking subsystem. A manned, remote simulation has demonstrated its feasibility during the terminal rendezvous and docking phases. Should this approach prove fully adequate in subsequent detailed simulation studies and tests, an order-of-magnitude cost savings can be obtained for early rendezvous and docking operations.

Hurley, M. J.↗

Practical applications of low, medium, and high altitude aircraft remote sensing data to land use planning

Remotely sensed data is gaining wider acceptance in land use planning activities because of several inherent advantages offered by the technology. Scope of applications have increased to meet planners broadening responsibilities and needs for more comprehensive and specific information in response to new legislative mandates. Specific data needs associated with the land use planning process are varied. To illustrate how remote sensing surveys can be designed to meet a variety of goals at several planning levels, specific examples of the use of remotely sensed data and analysis techniques in four planning oriented land use surveys are discussed. These examples illustrate the use of aerial photography at the state planning level in Maryland and county level in Jefferson Parish, Louisiana. Special applications of aerial photography are demonstrated by energy planning in San Bernardino County, California and water management planning in New Castle County, Delaware.

Drackett, K.↗

A biological and physical oceanographic remote sensing study aboard the Calypso

The paper discusses an oceanographic remote sensing program conducted aboard the R/V Calypso in the Gulf of Mexico and the Caribbean Sea to provide information for correlating ocean measurements with remotely sensed observations. Remote sensors on satellites and aircraft are used as operations and experiment planning tools as well as for scientific data acquisition. Emphasis is on providing surface-truth measurements for OCS flights and on investigating the area of the Gulf affected by the outflow of the Mississippi River. The discussion covers the shipboard instrumentation, ocean color scanner data acquisition and results, NOAA/VHRR data analysis approach, and Landsat and APT/ATS as planning tools. The research effort has demonstrated the feasibility of using satellite data as a supportive method to aid an oceanographic research vessel on a near real-time basis.

Harlan, J. C.↗

Remote sensing of land use and water quality relationships - Wisconsin shore, Lake Michigan

This investigation assessed the utility of remote sensing techniques in the study of land use-water quality relationships in an east central Wisconsin test area. The following types of aerial imagery were evaluated: high altitude (60,000 ft) color, color infrared, multispectral black and white, and thermal; low altitude (less than 5000 ft) color infrared, multispectral black and white, thermal, and passive microwave. A non-imaging hand-held four-band radiometer was evaluated for utility in providing data on suspended sediment concentrations. Land use analysis includes the development of mapping and quantification methods to obtain baseline data for comparison to water quality variables. Suspended sediment loads in streams, determined from water samples, were related to land use differences and soil types in three major watersheds. A multiple correlation coefficient R of 0.85 was obtained for the relationship between the 0.6-0.7 micrometer incident and reflected radiation data from the hand-held radiometer and concurrent ground measurements of suspended solids in streams. Applications of the methods and baseline data developed in this investigation include: mapping and quantification of land use; input to watershed runoff models; estimation of effects of land use changes on stream sedimentation; and remote sensing of suspended sediment content of streams. High altitude color infrared imagery was found to be the most acceptable remote sensing technique for the mapping and measurement of land use types.

Haugen, R. K.↗

Application of remote sensor data to geologic analysis of the Bonanza test site, Colorado

The author has identified the following significant results. The Hayden Pass (Orient mine area) includes 60 sq miles of the northern Sangre de Cristo Mountains and San Luis Valley in south-central Colorado. Based on interpretation of the remote sensor data, a geologic map was prepared and compared with a second geologic map, prepared from interpretation of both remote sensor data and field data. Comparison of the two maps gives an indication of the usefulness and reliability of the remote sensor data. The relative utility of color and color infrared photography was tested. The photography was used successfully to locate 75% of all faults in a portion of the geologically complex Bonanza volcanic center and to map and correctly identify 93% of all quaternary deposits and 62% of all areas of tertiary volcanic outcrop. Using a filter wheel photometer, more than 8,600 measurements of band reflectance of several sedimentary rocks were performed. The following conclusions were drawn: (1) the typical spectral reflectance curve shows a gradual increase with increasing wavelength; (2) the average band reflectance is about 0.20; and (3) within a formation, the minimum natural variation is about 0.04, or about 20% of the mean band reflectance.

Lee, K.↗

Results from the National Aeronautics and Space Administration remote sensing experiments in the New York Bight, 7-17 April 1975

A cooperative operation was conducted in the New York Bight to evaluate the role of remote sensing technology to monitor ocean dumping. Six NASA remote sensing experiments were flown on the C-54, U-2, and C-130 NASA aircraft, while NOAA obtained concurrent sea truth information using helicopters and surface platforms. The experiments included: (1) a Radiometer/Scatterometer (RADSCAT), (2) an Ocean Color Scanner (OCS), (3) a Multichannel Ocean Color Sensor (MOCS), (4) four Hasselblad cameras, (5) an Ebert spectrometer; and (6) a Reconafax IV infrared scanner and a Precision Radiation Thermometer (PRT-5). The results of these experiments relative to the use of remote sensors to detect, quantify, and determine the dispersion of pollutants dumped into the New York Bight are presented.

Hall, J. B., Jr.↗

Remote sensing inputs to landscape models which predict future spatial land use patterns for hydrologic models

A tropical forest area of Northern Thailand provided a test case of the application of the approach in more natural surroundings. Remote sensing imagery subjected to proper computer analysis has been shown to be a very useful means of collecting spatial data for the science of hydrology. Remote sensing products provide direct input to hydrologic models and practical data bases for planning large and small-scale hydrologic developments. Combining the available remote sensing imagery together with available map information in the landscape model provides a basis for substantial improvements in these applications.

Miller, L. D.↗

Quantitative mapping of chlorophyll a distributions in coastal zones by remote sensing

Results of experiments conducted in the James River, Virginia and the New York Bight indicate that concurrently collected sea-truth measurements may be used to calibrate remotely sensed multispectral scanner data collected over each of these environmentally different scenes. Statistical stepwise regression analysis was used in both experiments to incorporate significant bands of MSS data into regression equations that quantitatively relate remotely sensed data to water quality parameters, such as chlorophyll a and suspended sediment. These regression equations are used to map synoptic distributions of chlorophyll a in the remotely sensed scenes.

Johnson, R. W.↗

An information system design for watershed-wide modeling of water loss to the atmosphere using remote sensing techniques

Results are presented of a study intended to develop a general location-specific remote-sensing procedure for watershed-wide estimation of water loss to the atmosphere by evaporation and transpiration. The general approach involves a stepwise sequence of required information definition (input data), appropriate sample design, mathematical modeling, and evaluation of results. More specifically, the remote sensing-aided system developed to evaluate evapotranspiration employs a basic two-stage two-phase sample of three information resolution levels. Based on the discussed design, documentation, and feasibility analysis to yield timely, relatively accurate, and cost-effective evapotranspiration estimates on a watershed or subwatershed basis, work is now proceeding to implement this remote sensing-aided system.

Khorram, S.↗

Robots and manipulator systems; Proceedings of the Second Conference on Remotely Manned Systems, Los Angeles, Calif., June 9-11, 1975

Attention is given to supervisory control of remote manipulation, an automatic device for measuring viscoelasticity, adaptable programmable assembly systems for teleoperator applications, and proximity sensor technology for manipulator end effectors. Also considered are control and stability problems of remote orbital capture, orbital servicing and remotely manned systems, gray-level transformations for interactive image enhancement, and the design of a three-fingered hand

Heer, E.↗

Orbital servicing and remotely manned systems

The potential of the concepts and techniques of remotely manned aerospace systems to fully exploit the utility and benefits of orbital servicing is discussed. Orbital servicing has been shown to benefit the Space Transportation System by helping to satisfy spacecraft program objectives of long operating times on-orbit while reducing program costs. The wide range of servicer mechanisms postulated in the literature is reduced to two concepts which are used to generate a set of control system requirements. Three control mode alternatives - automatic, supervisory control, and remotely manned control - are introduced, defined, evaluated and each found wanting in certain areas. A combination of supervisory and remotely manned control is shown to overcome most problems.

Smith, G. W.↗

Laboratory requirements for in-situ and remote sensing of suspended material

Recommendations for laboratory and in-situ measurements required for remote sensing of suspended material are presented. This study investigates the properties of the suspended materials, factors influencing the upwelling radiance, and the various types of remote sensing techniques. Calibration and correlation procedures are given to obtain the accuracy necessary to quantify the suspended materials by remote sensing. In addition, the report presents a survey of the national need for sediment data, the agencies that deal with and require the data of suspended sediment, and a summary of some recent findings of sediment measurements.

Kuo, C. Y.↗

Testing the accuracy of remote sensing land use maps

Some of the main aspects that need to be considered in a remote sensing sampling design are: (1) the frequency that any one land use type (on the ground) is erroneously attributed to another class by the interpreter; (2) the frequency that the wrong land use (as observed on the ground) is erroneously included in any one class by the remote sensing interpreter; (3) the proportion of all land (as determined in the field) that is mistakenly attributed by the interpreter; and (4) the determination of whether the mistakes are random (so that the overall proportions are approximately correct) or subject to a persistent bias. A sampling and statistical testing procedure is presented which allows an approximate answer to each of these aspects. The concept developed and described incorporates the probability of making incorrect interpretations at particular prescribed accuracy levels, for a certain number of errors, for a particular sample size. It is considered that this approach offers a meaningful explanation of the interpretation accuracy level of an entire remote sensing land use survey.

Vangenderen, J. L.↗

Remote sensing of water quality

Remote sensing from aircraft has been used to determine water content in areas such as the New York Bight. Extension of the techniques developed to satellite sensing of the Chesapeake Bay will begin in 1978 with the launch of Nimbus-G. Remote sensing offers a number of interesting possibilities for investigating a reasonably large body of water, such as the Chesapeake Bay, coupled with some disadvantages. The chief advantage of remote sensing is that it offers the opportunity to cover large areas in relatively short periods of time. Low altitude satellites traveling at about 7 km/s can cover the Chesapeake Bay in about 1 minute so that the entire Bay can be studied under almost identical conditions of solar illumination.

Hovis, W. A.↗

Role of remote sensing in documenting living resources

Specific cases of known or potentially useful applications of remote sensing in assessing biological resources are discussed. It is concluded that the more usable remote sensing techniques relate to the measurement of population fluctuations in aquatic systems. Sensing of the flora and the fauna of the Bay is considered with emphasis on direct sensing of aquatic plant populations and of water quality. Recommendations for remote sensing projects are given.

Wagner, P. E.↗

Quarterly literature review of the remote sensing of natural resources

The Technology Application Center reviewed abstracted literature sources, and selected document data and data gathering techniques which were performed or obtained remotely from space, aircraft or groundbased stations. All of the documentation was related to remote sensing sensors or the remote sensing of the natural resources. Sensors were primarily those operating within the 10 to the minus 8 power to 1 meter wavelength band. Included are NASA Tech Briefs, ARAC Industrial Applications Reports, U.S. Navy Technical Reports, U.S. Patent reports, and other technical articles and reports.

Fears, C. B.↗