Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ReN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Carbon accumulation rate peaks at 1,000-m elevation in tropical planted and regrowth forests

Tropical planted and regrowth forests (TPRFs) are one of the most low-cost components for recovering biomass-stored carbon in the tropics. Nevertheless, challenges persist in pinpointing which elevational ranges exhibit the largest carbon accumulation rate ($γ$ rapid ) due to the highly inconsistent previous assessments. This prevents the selection of optimal locations for implementing large-scale reforestation in the tropics. Here, in this study, we proposed a refined approach that used a carbon accumulation threshold (<80% of the maximum value) to quantify $γ$ rapid in TPRFs at various elevations. We find that $γ$ rapid increases with elevations from 300 to 1,000 m and declines at elevations >1,000 m. TPRFs at elevations ~1,000 m exhibit three times more $γ$ rapid than lowland TPRFs. This optimal elevation, highly dependent on background temperatures, varies slightly but significantly across different mountains. These findings provide guidelines for policymakers to determine the optimal elevations from regional to continental scales when implementing reforestation initiatives in the tropics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Variable rate neural compression for sparse detector data

Particle colliders produce data at extraordinary rates, posing major challenges for transmission and storage. High-throughput compression algorithms are therefore essential. In the sPHENIX experiment taking data at the Relativistic Heavy Ion Collider, a time projection chamber records three-dimensional (3D) particle trajectories that are highly sparse, making conventional learning-free lossy compression ineffective. Convolutional neural networks have surpassed traditional methods in compression ratio and accuracy. However, they fail to exploit sparsity for efficiency. To address these gaps, we present BCAE-VS, a bicephalous convolutional autoencoder with variable compression ratio for sparse data, which adapts compression to input complexity through key-point identification and sparse convolution. BCAE-VS achieves higher accuracy and compression ratios than prior neural approaches while being orders of magnitude smaller. Moreover, its throughput increases with sparsity—a property not observed in other methods. Although it was developed for collider experiments, BCAE-VS readily extends to other sparse data domains, such as light detection and ranging (LiDAR) sensing and 3D microscopy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Deep inverse photonic design: A tutorial

Deep learning (DL) has been used to design deep neural networks (DNNs) which have recently been applied to solving inverse problems in artificial electromagnetic materials (AEMs). Although inverse problems are often ill-posed, and therefore are difficult to solve, deep inverse models (DIMs) have achieved impressive results often surpassing capabilities possible with other approaches. We overview the process of deep inverse learning applied to AEM problems, including the building of data sets, design of a forward model, and comparison of inverse approaches including limitations. We conclude by detailing some important outstanding issues of deep inverse design of AEMs, and present an outlook of this exciting field.

42 ENGINEERING↗
DOE OSTI2025

Ordinary and exotic mesons in the extended Linear Sigma Model

The extended Linear Sigma Model (eLSM) is a hadronic model based on the global symmetries of QCD and the corresponding explicit, anomalous, and spontaneous breaking patterns. In its basic three-flavor form, its mesonic part contains the dilaton/glueball as well as the nonets of pseudoscalar, scalar, vector, and axial–vector mesons, thus chiral symmetry is linearly realized. In the chiral limit and neglecting the chiral anomaly, only one term – within the dilaton potential – breaks dilatation invariance, and all terms are chirally symmetric. Spontaneous symmetry breaking is implemented by a generalization of the Mexican-hat potential, with explicit symmetry breaking responsible for its tilting. The overall mesonic phenomenology up to ~2 GeV is in agreement with the PDG compilation of masses and partial and total decay widths. The eLSM was enlarged in a straightforward way to include other conventional quark–antiquark nonets (pseudovector and orbitally excited vector mesons, tensor and axial-tensor mesons, radially excited (pseudo)scalar mesons, etc.), as well as two nonets of hybrid mesons, the lightest one with exotic quantum numbers J $\mathscr{PC}$ = 1 -+ not allowed for $\bar{q}q$ objects, such as the resonance π 1 (1600) and the recently discovered η 1 (1855) . In doing so, different types of chiral multiplets are introduced: heterochiral and homochiral multiplets, which differ in the way they transform under chiral transformations. Moreover, besides the scalar glueball that is present from the beginning as dilaton, other glueballs, the tensor, the pseudoscalar and the vector glueballs were coupled to the eLSM: the scalar resonance ƒ 0 (1710) turns out to be mostly gluonic, the tensor glueball couples strongly to vector mesons, and the pseudoscalar glueball couples sizably to $ππη'$ and can be assigned to X (2370) or X (2600). In all cases above, masses and decays can be analyzed allowing for a better understanding of both conventional and non-conventional mesons: whenever data are available, a comparison is performed and, when this is not the case, predictions of decay widths and decay ratios are outlined. The eLSM contains chiral partners on an equal footing and is therefore well suited for studies of chiral symmetry restoration at nonzero temperature and densities: this is done by coupling it to the Polyakov loop. Finally, the QCD phase diagram and the location of the critical endpoint were investigated within this framework.

Chiral symmetry↗
DOE OSTI2022

DNS Of the ignition process of n-heptane/air premixed combustion with low-temperature chemistry in turbulent boundary layer

In the present work, three-dimensional direct numerical simulation (DNS) of n-heptane/air premixed combustion in turbulent boundary layer was performed to explore the near-wall ignition process with low -temperature chemistry. A reduced chemical mechanism with 58 species and 387 elementary reactions for n-heptane combustion was used in the DNS. The general characteristics of the ignition process near the wall were examined. Here, it was found that low-temperature ignition (LTI) dominates the upstream region, and high -temperature ignition (HTI) appears in the downstream region. The ignition process and the low-temperature chemistry pathways of the DNS are compared with those of a corresponding laminar case. It was found that the ignition process was affected by turbulence, which results in thickened reaction zones. However, the carbon flow analysis of low-temperature chemistry showed that turbulence rarely affects the low-temperature chemistry pathway. The combustion modes of various regions were scrutinized based on the budget terms of species transport equations and the chemical explosion mode analysis (CEMA). It was shown that the reaction term of RO 2 is significant during the LTI process of the upstream region, and the reaction terms of CH 2 O and CO 2 are evident in the downstream region, indicating the occurrence of HTI. It was also shown that auto-ignition is dominant in the upstream region. With increasing streamwise distance, the contribution of flame propagation increases, which takes over that of auto-ignition in the near-wall region.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Energy-Efficient Microbial Electrochemical Lignin and Alkaline Hydroxide Recovery from DMR Black Liquor

Black liquor is a complex waste stream generated from the fast-expanding biorefinery industry, and the high management cost has been known as a major development barrier. In this work, we demonstrated a rationally designed 4-chamber microbial electrolysis process that was capable of recovering the value-added lignin, NaOH, and H2 products while removing waste organics from the Deacetylation and Mechanical Refining (DMR) black liquor, which could potentially reduce the disposal cost by up to 40%. The lab-scale MEC achieved 52% organic removal from a highly concentrated feedstock (28,960 ± 212 mg/L COD) and recovered 83.2 mM NaOH under a small voltage application (1.2 V). Lignin recovery was observed to be as high as 13.98 +/- 0.28 g/L, and 0.35 L/L/day H2 was produced with a faradaic efficiency of 93.5%. This work provided a good example on how complex liquid waste stream can be valorized via multi-functional microbial electrochemical technology, and how the traditionally unfavored pH gradient in an electrochemical reactor can be manipulated for lignin precipitation and alkaline recovery at the same time. The versatility and good performance in concurrent contaminants removal, lignin precipitation, H2 production and NaOH recovery demonstrate a good potential for microbial electrolysis in black liquor treatment.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2021

Seasonal and long-term variations in leaf area of Congolese rainforest

It is important to understand temporal and spatial variations in the structure and photosynthetic capacity of tropical rainforests in a world of changing climate, increased disturbances and human appropriation. The equatorial rainforests of Central Africa are the second largest and least disturbed of the biodiversly-rich and highly productive rainforests on Earth. Currently, there is a dearth of knowledge about the phenological behavior and long-term changes that these forests are experiencing. Here, this study reports on leaf area seasonality and its time trend over the past two decades as assessed from multiple remotely sensed datasets. Seasonal variations of leaf area in Congolese forests derived from MODIS data co-vary with the bimodal precipitation pattern in this region, with higher values during the wet season. Independent observational evidence derived from MISR and EPIC sensors in the form of angular reflectance signatures further corroborate this seasonal behavior of leaf area. The bimodal patterns vary latitudinally within this large region. Two sub-seasonal cycles, each consisting of a dry and wet season, could be discerned clearly. These exhibit different sensitivities to changes in precipitation. Contrary to a previous published report, no widespread decline in leaf area was detected across the entire extent of the Congolese rainforests over the past two decades with the latest MODIS Collection 6 dataset. Long-term precipitation decline did occur in some localized areas, but these had minimal impacts on leaf area, as inferred from MODIS and MISR multi-angle observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Reversible magnetism transition at ferroelectric oxide heterointerface

Oxide heterointerface is a platform to create unprecedented two-dimensional electron gas, superconductivity and ferromagnetism, arising from a polar discontinuity at the interface. In particular, the ability to tune these intriguing effects paves a way to elucidate their fundamental physics and to develop novel electronic/magnetic devices. Here, we report for the first time that a ferroelectric polarization screening at SrTiO 3 /PbTiO 3 interface is able to drive an electronic construction of Ti atom, giving rise to room-temperature ferromagnetism. Surprisingly, such ferromagnetism can be switched to antiferromagnetism by applying a magnetic field, which is reversible. A coupling of itinerant electrons with local moments at interfacial Ti 3d orbital was proposed to explain the magnetism. The localization of the itinerant electrons under a magnetic field is responsible for the suppression of magnetism. These findings provide new insights into interfacial magnetism and their control by magnetic field relevant interfacial electrons promising for device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Efimov-like states and quantum funneling effects on synthetic hyperbolic surfaces

Engineering lattice models with tailored inter-site tunnelings and onsite energies could synthesize essentially arbitrary Riemannian surfaces with highly tunable local curvatures. Here, we point out that discrete synthetic Poincaré half-planes and Poincaré disks, which are created by lattices in flat planes, support infinitely degenerate eigenstates for any nonzero eigenenergies. Such Efimov-like states exhibit a discrete scaling symmetry and imply an unprecedented apparatus for studying quantum anomaly using hyperbolic surfaces. Furthermore, all eigenstates are exponentially localized in the hyperbolic coordinates, signifying the first example of quantum funneling effects in Hermitian systems. As such, any initial wave packet travels towards the edge of the Poincaré half-plane or its equivalent on the Poincaré disk, delivering an efficient scheme to harvest light and atoms in two dimensions. Furthermore, our findings unfold the intriguing properties of hyperbolic spaces and suggest that Efimov states may be regarded as a projection from a curved space with an extra dimension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗