Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiative properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Gravitational memory and compact extra dimensions

Here we develop a general formalism for treating radiative degrees of freedom near $\mathscr{I}^+$ in theories with an arbitrary Ricci-flat internal space. These radiative modes are encoded in a generalized news tensor which decomposes into gravitational, electromagnetic, and scalar components. We find a preferred gauge which simplifies the asymptotic analysis of the full nonlinear Einstein equations and makes the asymptotic symmetry group transparent. This asymptotic symmetry group extends the Bondi–Metzner–Sachs (BMS) group to include angle-dependent isometries of the internal space. We apply this formalism to study memory effects, which are expected to be observed in future experiments, that arise from bursts of higher-dimensional gravitational radiation. We outline how measurements made by gravitational wave observatories might probe properties of the compact extra dimensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

DNA-mediated assembly of Au bipyramids into anisotropic light emitting kagome superlattices

Colloidal crystal engineering with DNA allows one to design diverse superlattices with tunable lattice symmetry, composition, and spacing. Most of these structures follow the complementary contact model, maximizing DNA hybridization on building blocks and producing relatively close-packed lattices. Here, low-symmetry kagome superlattices are assembled from DNA-modified gold bipyramids that can engage only in partial DNA surface matching. The bipyramid dimensions and DNA length can be engineered for two different superlattices with rhombohedral unit cells, including one composed of a periodic stacking of kagome lattices. Enabled by the partial facet alignment, the kagome lattices exhibit lattice distortion, bipyramid twisting, and planar chirality. When conjugated with Cy-5 dyes, the kagome lattices serve as cavities with high-density optical states and large Purcell factors along lateral directions, leading to strong dipole radiation along thezaxis and facet-dependent light emission. Such complex optical properties make these materials attractive for lasers, displays, and quantum sensing constructs.

Science & Technology - Other Topics↗
DOE OSTI2022

FFT-based model for irradiated aggregate microstructures in concrete

The concrete biological shield of light water reactors is exposed to neutron and gamma irradiation throughout its lifetime, which results in the long-term degradation of the concrete’s mechanical properties. Under neutron irradiation, the concrete’s aggregates are subjected to radiation-induced volumetric expansion (RIVE), which strongly depends on the mineral content of the aggregate and exhibits the largest expansion in silicate-bearing minerals. In this work, the authors used the fast Fourier transform-based code Microstructure-Oriented Scientific Analysis of Irradiated Concrete (MOSAIC) in 2D to model the expansion of five different aggregates provided by the Japan Concrete Aging Management Program (JCAMP). Comparable rock specimens were irradiated at the JEEP-II test reactor. The model uses realistic aggregate microstructure reconstruction based on high-resolution characterization images. The model accounts for anisotropic RIVE, thermal expansion, and the associated initiation and propagation of damage. The RIVE models are calibrated based on expansion data in the literature. The authors assume that damage occurs exclusively at interfaces between the particles that compose an aggregate and that these interfaces also exhibit swelling. Using a micromechanical model, the evolution of Young’s modulus with RIVE is calculated for each aggregate and compared with Russian irradiation data. The modeled linear expansion agrees well with the experimentally measured expansion. Furthermore, the model also predicts that anisotropic RIVE and thermal expansion result in an earlier onset of damage with neutron fluence than in the isotropic case.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Heuristic Sonification Methods for Electromagnetic Signals Report

Sonification algorithms convert information to audible representations. The 2025 Seed Money project “Exploring Electromagnetic Signals through Sonification” seeks to create machine-learning based methods to convert electromagnetic signals to sound for human interpretation. However, as a precursor to ML-based methods, some heuristic methods have been investigated in preparation for the seed project. This report covers some example methods, applied to the “Flaming Moes” dataset of unintended radiative emissions (URE), with some simple metrics to study the device discrimination properties of the sonification as well as the “pleasantness” of the methods.

42 ENGINEERING↗
DOE OSTI2025

Frequency-Selectable Laser Source (FLS) for Cosmic Microwave Background Experiments

Cosmic Microwave Background (CMB) experiments measure remnant radiation from the early universe and use that data to determine fundamental properties of the universe. We can constrain key parameters, such as \textit{r}, the cosmic tensor-to-scalar ratio, and $N_\text{eff}$, the effective number of relativistic species, by analyzing the CMB power spectra. Improving our measurements of the CMB requires improving our instrument systematics, one of the most important of which is detector bandpass. Current experiments use a Fourier Transform Spectrometer (FTS) to measure bandpass. However, the FTS is systematics limited, and cannot achieve the accuracy needed to make improved CMB measurements. For this reason, we are developing a new instrument, the Frequency-Selectable Laser Source (FLS) to decrease the uncertainty in bandpass by an order of magnitude. In this paper, we describe work completed to support the version 2 upgrade to the FLS. Using ray-tracing software, we modeled the FLS optics to set physical tolerances for the new design. We also discuss the laser calibration, and future work to be completed in further development of the FLS upgrade.

Rosen-Turits, Gabriel M.↗
DOE OSTI2021

HD 63021: Chromospheric Activity and Mass Transfer in a Close Binary

Prompted by X-ray detections from multiple surveys, we investigated the A-type star HD 63021 and found that it is a double-lined spectroscopic binary with highly variable emission associated with the primary star. Analysis of our multiepoch spectroscopic observations, the majority of which were carried out on small-aperture telescopes, indicates a very short orbital period of just 2.9 days and a mass ratio M {sub 2}/M {sub 1} of 0.23. The A1 V star is a slow rotator, with a rotational speed of ∼34 km s{sup −1}. Assuming that its mass is 2.3 M {sub ⊙}, the present-day secondary is an evolved star of ∼0.5 M {sub ⊙} that nearly fills its Roche lobe. This secondary star rotates comparatively rapidly at ∼44 km s{sup −1}, and we see evidence that it is chromospherically active. Analysis of a photometric light curve from TESS reveals two strong periods, one at the orbital period for the system and another at half the orbital period. These findings suggest that HD 63021 is a close binary system undergoing mass transfer from the secondary star onto the primary star—in all ways like an Algol eclipsing binary system, except without the eclipse. We discuss the system’s mass transfer, which is not steady but seems to run in fits and bursts, and infer the system’s basic physical properties from an orbital parameter study, the Roche lobe geometry, and its extant X-ray emission.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Chapter 21. Atomic-Level Dislocation Dynamics in Irradiated Metals

Primary damage and microstructure evolution in structural nuclear materials operating under conditions of a high flux of energetic atomic particles and high temperature and stress lead to the formation of a high concentration, non-homogeneous distribution of defect clusters in the form of dislocation loops, voids, gas-filled bubbles and radiation-induced precipitates of nanometer scale. They cause changes in many material properties. Being obstacles to dislocation glide, they strongly affect the mechanical properties, with an increase in yield and flow stresses and a reduction in ductility. Atomic-scale computer simulations can provide details of how these effects are influenced by the obstacle structure, applied stress, strain rate and temperature. Processes such as obstacle cutting, transformation, absorption and drag are observed. Some recent results for body-centered and face-centered cubic metals are described in this review and, where appropriate, comparisons are drawn with predictions based on the elasticity theory of crystal defects. Perspectives on how to use this information at higher scales and in particular in mesoscale, dislocation dynamics simulations are also discussed.

Osetskiy, Yury N.↗
DOE OSTI2025

Frequency-Selectable Laser Source for Cosmic Microwave Background Experiments

Cosmic Microwave Background (CMB) experiments measure remnant radiation from the early universe and use that data to determine fundamental properties of the universe. We can constrain key parameters, such as \textit{r}, the cosmic tensor-to-scalar ratio, and $N_\text{eff}$, the effective number of relativistic species, by analyzing the CMB power spectra. Improving our measurements of the CMB requires improving our instrument systematics, one of the most important of which is detector bandpass. Current experiments use a Fourier Transform Spectrometer (FTS) to measure bandpass. However, the FTS is systematics limited, and cannot achieve the accuracy needed to make improved CMB measurements. For this reason, we are developing a new instrument, the Frequency-Selectable Laser Source (FLS) to decrease the uncertainty in bandpass by an order of magnitude. In this paper, we describe work completed to support the version 2 upgrade to the FLS. Using ray-tracing software, we modeled the FLS optics to set physical tolerances for the new design. We also discuss the laser calibration, and future work to be completed in further development of the FLS upgrade.

Rosen-Turits, Gabriel M. [Fermilab]↗
DOE OSTI2022

Revealing hidden defects through stored energy measurements of radiation damage

With full knowledge of a material’s atomistic structure, it is possible to predict any macroscopic property of interest. In practice, this is hindered by limitations of the chosen characterization techniques. For example, electron microscopy is unable to detect the smallest and most numerous defects in irradiated materials. Instead of spatial characterization, we propose to detect and quantify defects through their excess energy. Differential scanning calorimetry of irradiated Ti measures defect densities five times greater than those determined using transmission electron microscopy. Our experiments also reveal two energetically distinct processes where the established annealing model predicts one. Molecular dynamics simulations discover the defects responsible and inform a new mechanism for the recovery of irradiation-induced defects. The combination of annealing experiments and simulations can reveal defects hidden to other characterization techniques and has the potential to uncover new mechanisms behind the evolution of defects in materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Determining the Structure of Rotating Massive Stellar Cores with Gravitational Waves

The gravitational wave (GW) signal resulting from stellar core collapse encodes a wealth of information about the physical parameters of the progenitor star and the resulting core-collapse supernova (CCSN). We present a novel approach to constrain CCSN progenitor properties at collapse using two of the most detectable parts of the GW signal: the core-bounce signal and evolution of the dominant frequency mode from the protoneutron star. We focus on the period after core bounce but before explosion and investigate the predictive power of GWs from rotating CCSNe to constrain properties of the progenitor star. We analyze 34 2D and four 3D neutrino-radiation-hydrodynamic simulations of stellar core collapse in progenitors of varied initial mass and rotation rate. Extending previous work, we verify the compactness of the progenitor at collapse to correlate with the early ramp-up slope, and in rotating cases, also with the core angular momentum. Combining this information with the bounce signal, we present a new analysis method to constrain the pre-collapse core compactness of the progenitor. Because these GW features occur less than a second after core bounce, this analysis could allow astronomers to predict electromagnetic properties of a resulting CCSN even before shock breakout.

Astronomy & Astrophysics↗
DOE OSTI2021

Southern Ocean Cloud Properties Derived From CAPRICORN and MARCUS Data

The properties of Southern Ocean (SO) liquid phase non precipitating clouds (hereafter clouds) are examined using shipborne data collected during the Measurements of Aerosols, Radiation and Clouds over the Southern Ocean and the Clouds Aerosols Precipitation Radiation and atmospheric Composition Over the SoutheRN ocean I and II campaigns that took place south of Australia during Autumn 2016 and Summer 2017–2018. Cloud properties are derived using data from W-band radars, lidars, and microwave radiometers using an optimal estimation algorithm. The SO clouds tended to have larger liquid water paths (LWP, 115 ± 117 g m -2 ), smaller effective radii (re, 8.7 ± 3 μm), and higher number concentrations (N d , 90 ± 107 cm-3) than typical values of eastern ocean basin stratocumulus. The clouds demonstrated a tendency for the LWP to increase with Nd presumably due to precipitation suppression up to Nd of approximately 100 cm -3 when mean LWP decreased with increasing Nd. Due to higher optical depth, cloud albedos were less susceptible to changes in Nd compared to subtropical stratocumulus. The highest latitude clouds of the datasets, observed along and near the Antarctic coast, presented a distinctly bimodal character. One mode had the properties of marine clouds further north. Additionally, the other mode occurred in an aerosol environment characterized by high cloud condensation nuclei concentrations and elevated sulfate aerosol without obvious continental aerosol markers. These regions of higher cloud condensation nuclei tended to have higher Nd, smaller re and higher LWP suggesting sensitivity of cloud properties to seasonal biogenic aerosol production in the high latitude SO.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Size-resolved process understanding of stratospheric sulfate aerosol following the Pinatubo eruption

Stratospheric sulfate aerosol produced by volcanic eruptions plays important roles in atmospheric chemistry and the global radiative balance of the atmosphere. The simulation of stratospheric sulfate concentrations and optical properties is highly dependent on the chemistry scheme and microphysical treatment. In this work, we implemented a sophisticated gas-phase chemistry scheme (full chemistry, FC) and a 5-mode version of the Modal Aerosol Module with Prognostic Stratospheric Aerosol (MAM5-PSA) for the interactive treatment of stratospheric sulfate aerosol in the Department of Energy's Energy Exascale Earth System Model version 2 (E3SMv2) model to better simulate the chemistry-aerosol feedback following the Pinatubo eruption, and to compare it against a simulation using simplified chemistry (SC) and the default 4-mode version of the Modal Aerosol Module (MAM4). MAM5-PSA experiments were found to better capture the stratospheric sulfate burden from the eruption of the volcano to the end of 1992 as compared to the High-resolution Infrared Sounder (HIRS) observations, and the formation of sulfate in MAM5-PSA with FC (with an additional OH replenishment reaction) was significantly faster than in MAM4 with FC. Analyses of microphysical processes indicate that more sulfate aerosol mass was generated in total in FC experiments than in SC experiments. MAM5-PSA performs better than MAM4 in simulation of aerosol optical depth (AOD); AOD anomalies from the MAM5-PSA experiment have better agreement with observations. The simulated largest changes in global mean net radiative flux at the top of the atmosphere following the eruption were about −3 W m −2 in MAM5-PSA experiments and roughly −1.5 W m −2 in MAM4 experiments.

AEROSOL↗
DOE OSTI2024

Radiation induced athermal diffusivity in uranium mononitride

Uranium mononitride (UN) is one of the ceramic nuclear fuel alternatives to oxide fuel considered for light water reactors and advanced reactor designs. Properties like self- and fission gas diffusivity need to be better understood, given that they influence key fuel performance phenomena such as fission gas swelling and release. In particular, the radiation induced athermal (D 3 ) diffusivity remains challenging to accurately predict and has only been sparsely characterized in UN, despite its importance as it likely governs diffusion at the low temperatures this high-thermal-conductivity fuel form may operate. Molecular Dynamics simulations are used to estimate the mean square displacement induced by a primary knock-on atom (PKA) with a given kinetic energy. These results are combined with the PKA energy distributions obtained from binary collision approximation calculations to obtain the displacement due to a particular fission fragment. Finally, this is combined with experimental fission fragment yields to determine the displacement due to an average fission event and, thus, express the athermal diffusivity as a function of the fission rate density. These results are in excellent agreement with available experimental data. In conclusion, a particular importance is given to the understanding and the quantification of the variability of these results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Photolytic Degradation of Water‐Soluble Organic Carbon in Snowmelts: Changes in Molecular Characteristics, Brown Carbon Chromophores, and Radiative Effects

Abstract Water‐soluble organic carbon (WSOC) deposited in ambient snowpack play key roles in regional carbon cycle and surface energy budget, but the impacts of photo‐induced processes on its optical and chemical properties are poorly understood yet. In this study, melted samples of the seasonal snow collected from northern Xinjiang, northwestern China, were exposed to ultraviolet (UV) radiation to investigate the photolytic transformations of WSOC. Molecular characteristics and chemical composition of WSOC and its brown carbon (BrC) constituents were investigated using high‐performance liquid chromatography interfaced with a photodiode array detector and a high‐resolution mass spectrometer. Upon illumination, formation of nitrogen‐ and sulfur‐containing species with high molecular weight was observed in snow samples influenced by soil‐ and plant‐derived organics. In contrast, the representative sample collected from remote region showed the lowest molecular diversity and photolytic reactivity among all samples, in which no identified BrC chromophores decomposed upon illumination. Approximately 65% of chromophores in urban samples endured UV irradiation. However, most of BrC composed of phenolic/lignin‐derived compounds and flavonoids disappeared in the illuminated samples containing WSOC from soil‐ and plant‐related sources. Effects of the photochemical degradation of WSOC on the potential modulation of snow albedo were estimated. Apparent half‐lives of WSOC estimated as albedo reduction in 300–400 nm indicated 0.1–0.4 atmospheric equivalent days, which are shorter than typical photolysis half‐lives of ambient biomass smoke aerosol. This study provides new insights into the roles of WSOC in snow photochemistry and snow surface energy balance.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

Novel indium phosphide charged particle detector characterization with a 120 GeV proton beam

Thin film detectors which incorporate semiconductor materials other than silicon have the potential to build upon their unique material properties and offer advantages such as faster response times, operation at room temperature, and radiation hardness. To explore the possibility, promising candidate materials were selected, and particle tracking detectors were fabricated. An indium phosphide detector with a metal-intrinsic-metal structure has been fabricated for particle tracking. The detector was tested using radioactive sources and a high energy proton beam at Fermi National Accelerator Laboratory. In addition to its simplistic design and fabrication process, the indium phosphide particle detector showed a very fast response time of hundreds of picoseconds for the 120 GeV protons, which are comparable to the ultra-fast silicon detectors. This fast-timing response is attributed to the high electron mobility of indium phosphide. Such material properties can be leveraged to build novel detectors with superlative performance.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Temperature-adaptive radiative coating for all-season household thermal regulation

The sky is a natural heat sink that has been extensively used for passive radiative cooling of households. A lot of focus has been on maximizing the radiative cooling power of roof coating in the hot daytime using static, cooling-optimized material properties. However, the resultant overcooling in cold night or winter times exacerbates the heating cost, especially in climates where heating dominates energy consumption. In this work, we approached thermal regulation from an all-season perspective by developing a mechanically flexible coating that adapts its thermal emittance to different ambient temperatures. The fabricated temperature-adaptive radiative coating (TARC) optimally absorbs the solar energy and automatically switches thermal emittance from 0.20 for ambient temperatures lower than 15°C to 0.90 for temperatures above 30°C, driven by a photonically amplified metal-insulator transition. Simulations show that this system outperforms existing roof coatings for energy saving in most climates, especially those with substantial seasonal variations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Cloud micro- and macrophysical properties from ground-based remote sensing during the MOSAiC drift experiment

In the framework of the Multidisciplinary drifting Observatory for the Study of Arctic Climate Polarstern expedition, the Leibniz Institute for Tropospheric Research, Leipzig, Germany, operated the shipborne OCEANET-Atmosphere facility for cloud and aerosol observations throughout the whole year. OCEANET-Atmosphere comprises, amongst others, a multiwavelength Raman lidar, a microwave radiometer, and an optical disdrometer. A cloud radar was operated aboard Polarstern by the US Atmospheric Radiation Measurement program. These measurements were processed by applying the so-called Cloudnet methodology to derive cloud properties. To gain a comprehensive view of the clouds, lidar and cloud radar capabilities for low- and high-altitude observations were combined. Cloudnet offers a variety of products with a spatiotemporal resolution of 30 s and 30 m, such as the target classification, and liquid and ice microphysical properties. Additionally, a lidar-based low-level stratus retrieval was applied for cloud detection below the lowest range gate of the cloud radar. Based on the presented dataset, e.g., studies on cloud formation processes and their radiative impact, and model evaluation studies can be conducted.

54 ENVIRONMENTAL SCIENCES↗