Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Application of Thermal Infrared Multiband Scanner (TIMS) data to mapping of Plutonic and stratified rock and assemblages in accreted terrains of the Northern Sierra, California

The Thermal Infrared Multispectral Scanner (TIMS) data were acquired over the Donner Pass area in California on September 12, 1985. The higher peaks in the area approach 9,200 feet in elevation, while the canyon of the north fork of the American River is only 3000 feet in elevation. The vegetation is dominated by conifers, although manzanita and other shrubs are present in areas where soils have developed. The data contain noise patterns which cut across scan lines diagonally. The TIMS data were analyzed using both photointerpretative and digital processing techniques. Preliminary image interpretation and field analysis confirmed that TIMS image data displays the chert units and silicic volcanics as bright red. The imagery appears to display zoning in the batholithic and hypabyssal intrusive rocks, although this was not field checked at this time. Rocks which appear to be more dioritic in composition appear purple on the imagery, while rocks more granitic in composition appear shades of red and pink. Areas that have more than 40% vegetative cover appear green on the imagery.

Taranik, James V.↗

Pristine moon rocks - A 'large' felsite and a metal-rich ferroan anorthosite

Results of elemental analyses, performed either by instrumental neutron activation analysis (NAA) or radiochemical NAA, of 19 lunar rock samples obtained by the Apollo 15, 17, and 12 missions are presented. Two of the samples are most extraordinary: 'large' (1 g) felsite from Apollo 12 and a pristine ferroan anorthosite from Apollo 15. The felsite is mainly a graphic intergrowth of K-feldspar and a silica phase, with about 6 pct plagioclase and 1 pct each of ferroaugite, ilmenite, and fayalitic olivine. The Fe-metal content of ferroan anorthosite is 1.2 wt pct in the thin section studied (but, based on mass balance for Co and Ni, must have been lower in the chip used for bulk-rock analysis); the measured bulk-rock concentrations of siderophile elements Re, Os, and Ir are far higher than previously observed among pristine lunar anorthosites. These results underscore the uncertainty associated with any attempt to estimate the overall siderophile element contents of the moon's crust.

Warren, Paul H.↗

Abundance and distribution of ultramafic microbreccia in Moses Rock Dike: Quantitative application of AIS data

Moses Rock dike is a Tertiary diatreme containing serpentinized ultramafic microbreccia (SUM). Field evidence indicates the SUM was emplaced first followed by breccias derived from the Permian strata exposed in the walls of the diatreme and finally by complex breccias containing basement and mantle derived rocks. SUM is found primarily dispersed throughout the matrix of the diatreme. Moses Rock dike was examined with Airborne Imaging Spectrometer (AIS) to map the distribution and excess of SUM in the matrix and to better understand the nature of the eruption which formed this explosive volcanic feature. AIS data was calibrated by dividing the suite of AIS data by data from an internal standard area and then multiplying this relative reflectance data by the absolute bidirectional reflectance of a selected sample from the standard area which was measured in the lab. From the calibrated AIS data the minerals serpentine, gypsum, and illite as well as desert varnish and the lithologies SUM and other sandstones were identified. SUM distribution and abundance in the matrix of the diatreme were examined in detail and two distinct styles of SUM dispersion were observed. The two styles are discussed in detail.

Mustard, John F.↗

Abundance and distribution of ultramafic microbreccia in Moses Rock dike - Quantitative application of mapping spectroscopy

Data from the Airborne Imaging Spectrometer were used to map the distribution and abundance of the serpentized ultramafic microbreccia (SUM) component in the Moses Rock dike, which is a Tertiary diatreme located on the Colorado Plateau in Utah. The geologic setting and composition of Moses Rock dike are discussed together with its texture and the relationship to the bedrock of surface materials. These observations along with laboratory spectroscopic data are used to interpret surface mineralogy of the dike and the surrounding regions from the imaging spectometer data. The spatial distribution and the abundance of the primary surface components were calculated using a nonlinear model for the mixing of spectra from multicomponent surfaces. The derived SUM distribution and abundance data support McGetchin's (1968) model for the emplacement of Moses Rock dike as a fluidized system.

Mustard, John F.↗

Pb, Sr, and Nd isotopic compositions of a suite of Large Archean, igneous rocks, eastern Beartooth Mountains - Implications for crust-mantle evolution

Compositionally diverse Late Archean rocks (2.74-2.79 Ga old) from the eastern Beartooth Mountains (Montana and Wyoming) were studied and shown to have the same initial Pb, Sr, and Nd isotopic ratios. Lead and Sr initial ratios are higher and Nd initial values lower than predicted for rocks derived from model mantle sources and strongly indicate the involvement of an older crustal reservoir in the genesis of these rocks. A model involving subduction of continental detritus and contamination of the overlying mantle is suggested.

Wooden, J. L.↗

Martian sediments and sedimentary rocks

Martian sediments and sedimentary rocks, clastic and nonclastic, should represent a high priority target in any future return-sample mission. The discovery of such materials and their subsequent analysis in terrestrial laboratories, would greatly increase the understanding of the Martian paleoclimate. The formation of Martian clastic sedimentary rocks, under either present, low-pressure, xeric conditions or a postulated, high-pressure, hydric environment, depends upon the existence of a supply of particles, various cementing agents and depositional basins. A very high resolution (mm-cm range) photographic reconnaissance of these areas would produce a quantum jump in the understanding of Martian geological history. Sampling would be confined to more horizontal (recent) surfaces. Exploration techniques are suggested for various hypothetical Martian sedimentary rocks.

Markun, C. D.↗

Chemistry and petrology of Apollo 17 highland coarse fines - Plutonic and melt rocks

A suite of 21 fragments from the Apollo 17 coarse-fines consists of ferroan anorthosites, anorthositic gabbros, granulitic and regolith breccias, and impact melts. These samples belong to known petrographic and chemical groups. Three ferroan anorthosites were found, including one which appears to be the lowest in REE (La = 0.60X) and probably the purest of the Apollo 17 anorthosites identified thus far. The ferroan suite is a more important component at the Apollo 17 site than previously recognized. The Apollo 17 melt rocks are similar to other samples with LKFM and low-K KREEP compositions and show less diversity in trace elements (REE) than the Apollo 15 melt rocks. Apollo 17 melt rocks consist of aphanitic and poikilitic types that show some compositional variability with identical Ni/Ir, suggesting that either two distinct melt sheets formed by similar projectiles, or compositional heterogeneity within one melt sheet is possible.

Laul, J. C.↗

Thermal infrared (2.5-13.5-micron) spectroscopic remote sensing of igneous rock types on particulate planetary surfaces

The compositional significance of outstanding spectral features in the reflectance spectra of particulate igneous rocks was investigated by analyzing directional reflectance spectra, obtained with an FTIR spectrophotometer at 2.17-13.5 microns, of a suite of well-characterized igneous rocks ground to fine particle size. It was found that, using spectral features associated with the principal Christiansen frequency and with a region of relative transparency between the Si-O stretching and bending bands, it is possible to identify general rock type using the Walter and Salisbury (1989) SCFM chemical index, SCFM, defined as SCFM = SiO2/(SiO2 + CaO + FeO + MgO). It is emphasized, however, that the appearance and the wavelength of these features may be affected by environmental factors.

Salisbury, John W.↗

Flow visualization study of delta wings in wing-rock motion

Water tunnel flow visualizations have been conducted for the wing-rock phenomenon in the cases of models having different leading-edge sweeps and roundness. Wing rock, which is noted to occur in the absence of asymmetric vortex liftoff, vortex breakdown, and static hysteresis, is seen to be initiated by flowfield asymmetries that are induced by flow disturbances and vortex interactions near the apex region; one vortex is thereby strengthened while the other is weakened, inducing a roll moment. Leading-edge roundness decreases vortex strength and reduces vortex spacing, reducing the tendency to wind rock and coupled vortex motions at higher angles-of-attack.

Ng, T. Terry↗

Workshop on Moon in Transition: Apollo 14, KREEP, and Evolved Lunar Rocks

Lunar rocks provide material for analyzing lunar history and now new evaluation procedures are available for discovering new information from the Fra Mauro highlands rocks, which are different from any other lunar samples. These and other topics were discussed at this workshop, including a new evaluation of the nature and history of KREEP, granite, and other evolved lunar rock types, and ultimately a fresh evaluation of the transition of the moon from its early anorthosite-forming period to its later stages of KREEPy, granitic, and mare magmatism. The summary of presentations and discussion is based on notes taken by the respective summarizers during the workshop.

Taylor, G. J.↗

Conical Euler simulation and active suppression of delta wing rocking motion

A conical Euler code was developed to study unsteady vortex-dominated flows about rolling highly-swept delta wings, undergoing either forced or free-to-roll motions including active roll suppression. The flow solver of the code involves a multistage Runge-Kutta time-stepping scheme which uses a finite volume spatial discretization of the Euler equations on an unstructured grid of triangles. The code allows for the additional analysis of the free-to-roll case, by including the rigid-body equation of motion for its simultaneous time integration with the governing flow equations. Results are presented for a 75 deg swept sharp leading edge delta wing at a freestream Mach number of 1.2 and at alpha equal to 10 and 30 deg angle of attack. A forced harmonic analysis indicates that the rolling moment coefficient provides: (1) a positive damping at the lower angle of attack equal to 10 deg, which is verified in a free-to-roll calculation; (2) a negative damping at the higher angle of attack equal to 30 deg at the small roll amplitudes. A free-to-roll calculation for the latter case produces an initially divergent response, but as the amplitude of motion grows with time, the response transitions to a wing-rock type of limit cycle oscillation. The wing rocking motion may be actively suppressed, however, through the use of a rate-feedback control law and antisymmetrically deflected leading edge flaps. The descriptions of the conical Euler flow solver and the free-to-roll analysis are presented. Results are also presented which give insight into the flow physics associated with unsteady vortical flows about forced and free-to-roll delta wings, including the active roll suppression of this wing-rock phenomenon.

Lee, Elizabeth M.↗

Weathering of basaltic rocks under cold, arid conditions - Antarctica and Mars

The processes taking part in the chemical weathering of nonvesicular dolerite cobbles producing etch pits and secondary minerals including clays, under cold arid conditions of high-altitude ice-free areas of Victoria Land (Antarctica) are investigated as a possible analog to processes that produced the pitted rocks and clay minerals on Mars. Results suggest that the pits in the dolerite cobbles are formed by the dissolution of the rock by rare snow-melt water during the austral summer, followed by wind erosion of weathered material. The upper interior walls of the pits are lined with a yellow precipitate consisting of illite and quartz mixture, while the pit bottoms contain alteration products including Fe-rich clay minerals and soluble salts. A model is proposed for rock pitting on Mars analogous to that of the Antarctic dolerites.

Allen, C. C.↗

A study of high alpha dynamics and flow visualization for a 2.5-percent model of the F-18 HARV undergoing wing rock

Free-to-roll experiments and flow visualization studies have been conducted for a 2.5-percent model of the F-18 undergoing unsteady wing rock oscillations. Data have been acquired in the form of roll angle time histories as well as video recordings and 35 mm photography of the forebody and leading edge extension vortices. The time histories were differentiated to produce angular velocity and angular acceleration. From this the roll moment as a function of time and/or roll angle could be estimated. A thorough analysis of the data has revealed a genuine wing-rock phenomenon. Off-surface flow visualization was used to identiify the forebody and LEX vortex core positions and their interaction in both static and dynamic configurations. A direct correlation between the dynamic data and visualized vortex activity during the wing-rock motion has been made.

Quast, Thomas↗

Petrogenesis of the western highlands of the moon - Evidence from a diverse group of whitlockite-rich rocks from the Fra Mauro formation

A group of KREEPy basalts has been discovered in Apollo 14 soils. These samples exhibit similarities to both HA and VHK basalts, albeit with much higher REE abundances, and contain up to 2 vol pct whitlockite and can be explained by assimilation of a K-, REE- and P-rich fluids by an original HA or VHK basalt. This KREEP component could have been produced late in the evolution of the lunar magma ocean and is similar in composition to QMD at Apollo 14. Two rocks have trace element compositions that are representative of actual KREEP. One of the samples appears to be petrographically pristine and could represent an actual KREEP basalt rock. Five subophitic high-Al basalts represent sampling of either a slowly cooled impact melt sheet or, more likely, the same basalt flow. Two 'quasi-pristine' highland rocks confirm the postulate of a connection between KREEP and the alkali suite. A newly discovered alkali anorthosite is a plagioclase cumulate with about 15 percent trapped KREEPy liquid.

Snyder, Gregory A.↗

Forebody vortex control for suppressing wing rock on a highly-swept wing configuration

Free-to-roll tests were conducted in a wind tunnel with a configuration that consisted of a highly-slender forebody and a 78 deg swept delta wing. A limit cycle oscillation was observed for angles of attack between 22 and 30 deg. In general, the main flow phenomena responsible for the wing-body-tail wing rock are the interactions between the forebody and the wing vortices. Various blowing techniques were evaluated as means of wing rock suppression. Blowing tangentially aft from leeward side nozzles near the forebody tip can damp the roll motion at low blowing rates and stop it completely at higher blowing rates. At the high rates, significant vortex asymmetries are created, causing the model to stop at a non-zero roll angle. Forward blowing and alternating right/left pulsed blowing appear to be more efficient techniques for suppressing wing rock. The oscillations can be damped almost completely at lower blowing coefficients, and, apparently, no major vortex asymmetries are induced. Good agreement is observed between this study and previous water tunnel tests on the same configuration.

Suarez, Carlos J.↗

Coeval Ar-40/Ar-39 ages of 65.0 million years ago from Chicxulub crater melt rock and Cretaceous-Tertiary boundary tektites

Ar-40/Ar-39 dating of drill-core samples of a glassy melt rock recovered from beneath a massive impact breccia contained with the 180-kilometer subsurface Chicxulub crater yields well-behaved incremental heating spectra with a mean plateau age of 64.98 +/- 0.05 million years ago (Ma). The glassy melt rock of andesitic composition was obtained from core 9 (1390 to 1393 meters) in the Chicxulub 1 well. The age of the melt rock is virtually indistinguishable from Ar-40/Ar-39 ages obtained on tektite glass from Beloc, Haiti, and Arroyo el Mimbral, northeastern Mexico, of 65.01 +/- 0.08 Ma (mean plateau age for Beloc) and 65.07 +/- 0.10 Ma (mean total fusion age for both sites). The Ar-40/Ar-39 ages, in conjunction with geochemical and petrological similarities, strengthen the suggestion that the Chicxulub structure is the source for the Haitian and Mexican tektites and is a viable candidate for the Cretaceous-Tertiary boundary impact site.

Swisher, Carl C., III↗

Thermobarometric studies on the Levack Gneisses: Footwall rocks to the Sudbury Igneous Complex

Granulite and amphibolite facies gneisses and migmatites of the Levack Gneiss Complex occupy a zone up to 8 km wide around the northern part of the Sudbury Igneous Complex (SIC). Orthopyroxene- and garnet-bearing tonalitic and semipelitic assemblages of granulite facies grade occur within 3 km of the SIC together with lenses of mafic and pyroxenitic rock compositions normally represented by an amphibole +/- cpx-rich assemblage; amphibolite facies assemblages dominate elsewhere in this terrain. These 2.711-Ga gneisses were introduced by (1) the Cartier Granite Batholith during late Archaean to early Proterozoic time and (2) the SIC, at 1.85 Ga, which produced a contact aureole 1-1.5 km wide in which pyroxene hornfelses are common within 200-300 m of the contact. A suite of 12 samples including both the opx-gt and amphibole-rich rock compositions have been studied. Garnets in the semipelitic gneisses are variably replaced by a plg-bio assemblage. Thermobarometric calculations using a variety of barometers and thermometers reported in the literature suggest that the granulite facies assemblages formed at depths in the 21-28 km range (6-8 kbar). Textures and mineral chemistry in the garnet-bearing semipelitic rocks indicate that this terrain underwent a second metamorphic event during uplift to depth in the 5-11 km range (2-3 kbar) and at temperatures as low as 500-550 C. This latter event is distinct from thermal recrystallization caused by the emplacement of the SIC; it probably represents metamorphism attributable to intrusion of the Cartier Granite Batholith. These data allow two interpretations for the crustal uplift of the Levack Gneisses: (1) The gneisses were tectonically uplifted prior to the Sudbury Event (due to intrusion of the Cartier Batholith); or (2) the gneisses were raised to epizonal levels as a result of meteorite impact at 1.85 Ga.

James, R. S.↗

Self-organized rock textures and multiring structure in the Duolun crater

The Duolun impact crater is a multiring basin located 200 km north of Beijing. From the center to the edge of the crater there are innermost rim, inner ring, outer rim, and outermost ring. Recently, we have found some self-organized textures or chaos phenomena in shock-metamorphic rocks from the Duolun impact crater, such as turbulence in matrices of impact glass, oscillatory zoning, or chemical chaos of spherulites in spherulitic splashed breccia, fractal wavy textures or self-similar wavy textures with varied scaling in impact glass, and crystallite beams shaped like Lorentz strange attractors. The rare phenomena indicate that the shock-metamorphic rocks from Duolun crater are formed far from equilibrium. If impact cratering generates momentarily under high-pressure and superhigh-temperature, occurrence of those chaos phenomena in shock-metamorphic rock is not surprising.

Wu, Siben↗