Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REMEDIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

On the Conversion of Bauxite Ores to Highly Activated Alumina Media for Water Remediation

Good quality drinking water is necessary to maintain a high quality of life. Millions lack access to clean and safe drinking water, and current trends suggest that billions will face acute water shortages in the coming decades. Development of new materials has led to technological impacts on water purification, from desalination membranes to atmospheric water scavenging. However, the most challenging aspect of technological solutions is cost: if the community being serviced cannot afford the solution, it is not likely to be sustainable. Repurposing Earth-abundant materials to replace highly engineered solutions is an atractive solution. Herein, minimal processing of bauxite rocks produces a high-porosity and reactive activated alumina in situ, without purification directly from the ore. This acid-treated, thermally activated bauxite (ATAB) exhibits a high surface area of 401 ± 6 m 2 g -1 , a 40-fold increase relative to its parent ore, and a 2× increase relative to the state-of-the-art fluoride adsorbent, activated alumina. The composition, preparation, and mechanism of adsorption are studied by X-ray diffraction, X-ray photoelectron spectroscopy, and multiple-quantum magic-angle spinning 27 Al nuclear magnetic resonance (NMR). Finally, the maximum adsorption density of ATAB is comparable with that of activated alumina, but ATAB requires fewer processing steps, thus warranting future consideration as a primary adsorbent of choice for fluoride removal from water.

36 MATERIALS SCIENCE↗

Chitosan–Gelatin @ Tin (IV) Tungstatophosphate Nanocomposite Ion Exchanger: Synthesis, Characterization and Applications in Environmental Remediation

The present study reported the synthesis of novel organic–inorganic hybrid nanocomposite by incorporating tin (IV) based ion exchanger into the hybrid polymer network of chitosan and gelatin prepared under vacuum for the efficient removal of heavy metal ions and toxic dyes from an aqueous fluid. The physicochemical studies such as ion exchange capacity (IEC), chemical stability, thermal stability, pH titration and distribution behaviour studies were also carried out to determine the cation exchange behaviour of the material. The surface morphology and structural properties were studied by the techniques such as FTIR, FESEM, EDS, TEM and XRD. Distribution studies confirmed the synthesized CG/STPNC had the highest selectivity for Pb{sup 2+} ions (85.3 mL/g). Maximum adsorption of methylene blue (82%) was achieved within 240 min at 500 mg of adsorbent dose, 10 mg/L of the initial concentration of dye, pH of 7 and 30 °C of temperature. Adsorption kinetic data fitted well with pseudo-second order rate model with R{sup 2} = 0.995. The correlation value 0.95 and favourable R{sub L} = 0.21 of adsorption data suggested better fit for Langmuir adsorption. Thus the synthesized nanocomposite ion exchanger was found to be a promising cation exchanger as well as an adsorbent for heavy metal ion and dye removal from textile industrial effluents. Graphical abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Intercalation of Nanopolyaniline with Nanobentonite and Manganese Oxide Nanoparticles as a Novel Nanocomposite to Remediate Cobalt/Zinc and Their Radioactive Nuclides {sup 60}Co/{sup 65}Zn

A novel nanocomposite based on the combination of nanobentonite with nanopolyaniline and nanomanganese oxide (N-Bent–NPANI–NMn{sub 3}O{sub 4}) was synthesized and investigated to extract Co/Zn ions from water using batch technique and {sup 60}Co/{sup 65}Zn radionuclides from radioactive wastewater using column techniques. Characterization was established by High resolution-transmission electron microscopy (HR-TEM), Scanning electron microscope, X-ray diffraction (XRD), thermal gravimetric analysis (TGA) and Fourier transform infrared spectrophotometer. The image of HR-TEM indicated that the produced nanocomposite was ranged from 59.07 to 83.38 nm. Solution pH, time of reaction, amount of solid and metal concentration, all of these parameters were inspected and optimized as fundamental factors during the extraction process. The obtained results implied that the ideal conditions for extraction were pH 6 and 7, reaction time 10 and 20 min, for Co and Zn ions, respectively. The highest removal capacities were found 255.28 and 202.22 mg g{sup −1} for Co and Zn, respectively by using 5 mg nanocomposite. Excellent recoveries were obtained as 94.0–94.5% and 92.0–93.0% for removal of Co–{sup 60}Co and of Zn–{sup 65}Zn ions, respectively from the examined samples. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization, modeling, and remediation of karst in a changing environment

This introductory editorial paper provides a review and prospective outlook of the achievements and challenges in karst research under a changing environment. A brief discussion of the past and future karst research has been focused on: (1) data and new technologies; (2) modeling of karst flow and reactive transport; (3) responses of karst hydrosystems to climate variability and changes across scales.

58 GEOSCIENCES↗

Remedial Amendment Delivery near the Water Table Using Shear Thinning Fluids: Experiments and Numerical Simulations

The use of shear thinning fluids (STFs) containing xanthan is a potential enhancement for emplacing a solute amendment near the water table and within the capillary fringe. Most research to date related to STF behavior has involved saturated and confined conditions. A series of flow cell experiments were conducted to investigate STF emplacement in variable saturated homogeneous and layered heterogeneous systems. Besides flow visualization using dyes, amendment concentrations and pressure data were obtained at several locations. The experiments showed that injection of STFs considerably improved the subsurface distribution near the water table by mitigating preferential flow through higher permeability zones compared to no-polymer injections. The phosphate amendment migrated with the xanthan SFT without retardation. Despite the high viscosity of the STF, no excessive mounding or preferential flow were observed in the unsaturated zone. The STOMP simulator was able to predict the experimentally observed fluid displacement and amendment concentrations reasonably well. Cross flow between layers could be interpreted as the main mechanism to transport STFs into lower permeability layers based on the observed pressure gradient and concentration data in layers of differing hydraulic conductivity.

Environmental Molecular Sciences Laboratory↗

Degenerate Hamiltonian operator in higher-order canonical gravity — The problem and a remedy

Different routes towards canonical formulation of a classical theory result in different canonically equivalent Hamiltonians, while their quantum counterparts are related through appropriate unitary transformation. However, for higher-order theory of gravity although two Hamiltonians emerging from the same action differing by total derivative terms are related through canonical transformation, the difference transpires while attempting canonical quantization, which is predominant in non-minimally coupled higher-order theory of gravity. We follow Dirac’s constraint analysis to formulate phase-space structures, in the presence (case-I) and absence (case-II) of total derivative terms. While the coupling parameter plays no significant role as such for case-I, quantization depends on its form explicitly in case-II, and as a result unitary transformation relating the two is not unique. We also find certain mathematical inconsistencies in case-I, for modified Gauss–Bonnet-Dilatonic coupled action, in particular. Thus, we conclude that total derivative terms indeed play a major role in the quantum domain and should be taken care of a-priori, for consistency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of machine learning to evaluating and remediating models for energy and environmental engineering

Machine learning (ML) algorithms have been increasingly successful in their applications to solve energy and environmental engineering problems. ML algorithms have the advantage of being able to solve highly nonlinear issues effectively. Furthermore, considering the limited sample size of data collected in energy and environmental engineering, obtaining a ML model with reasonable accuracy is simple. Unfortunately, the vast majority of the current applications of ML algorithms lack effective screening of dominant factors and comprehensive model validation, which weakens the predictive ability of the models. The present study takes the minimum miscible pressure (MMP) of CO 2 - oil systems as an example. It establishes a systematic and robust predictive model to address this issue. Based on 147 sets of slim tube tests, the predictive models of the MMPs are investigated by application of eight ML algorithms. The paper concludes that most of the published ML models in the field of energy and environmental engineering prediction are not reliable. Furthermore, it addresses the main reasons for the poor performance of some predictive models built by ML and provides guidelines on how to make such models robust. Further, to the best of our knowledge, this is the first study to point out the defects of current ML modeling methods and propose countermeasures for their application in energy and environmental engineering problems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Xylella fastidiosa, a new plant pathogen that threatens global farming: Ecology, molecular biology, search for remedies

Recently, the emergence of an important alien plant pathogen in Europe was evident when the Olive Quick Decline Syndrome (OQDS), a previously unknown disease causing rapid scorching and death of the trees, invested with particular virulence a substantial portion of the vast olive wood of Southern Italy (Salento, part of the Apulia region). Early evidence indicated a connection between the OQDS and the gram-negative bacterium Xylella fastidiosa. This bacterium can target several important crops, so that researchers from all over the world have investigated its association with host plants and vectors, the molecular biology of the infection mechanism, and the molecular reaction of the infected plants. Potentially resistant or tolerant cultivars and molecular targets which might be useful to control the infection have been identified. In vitro tests of compounds active against Xylella have also been performed. In this contribution, the literature and the available data will be reviewed to provide an up-to-date picture of the currently available knowledge on the role of Xylella in OQDS, and in diseases of other plants, with focus on the emerging threats to European farming.

60 APPLIED LIFE SCIENCES↗