Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTION CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Engine selection for the Space Exploration Initiative

The process used by NASA in the selection of the engine for the Space Exploration Initiative mission is described. The major propulsion requirements of the engine are addressed along with the engine options and key drivers and trades. Special attention is given to the requirements of the propellant feed system and the reaction control system. As a result of the 90-study, four moderate chamber pressure expander-cycle oxygen/hydrogen engines with a thrust level of 20,000 lbf each were selected for the lunar transfer vehicle. The paper also presents results of architecture studies and of advanced engine test bed studies.

Jones, Lee W.↗
NASA NTRS1990

Observations of thermal ion influxes about the space shuttle

Ion mass spectrometer measurements made as part of the University of Iowa's Plasma Diagnostic Package on the STS-3 and Spacelab 2 Space Shuttle missions sampled a variety of ion composition and collected ion current responses to gas emissions from the vehicle. The only other shuttle ion measurements were made by an Air Force Geophysics Laboratory (AFGL) quadrupole spectrometer flown on STS-4. Gas emissions change the distribution of the incoming plasma through scattering and charge transfer processes. A background flux of contaminant ion species (mostly relating to water) always exists in the near vicinity of the shuttle with a magnitude which is dependent on the look direction of the spectrometer but which varies differently with changes in the angle of attack than that of the ambient ions. There is a near shuttle wake cavity in the contaminant ion distributions which has a different spatial configuration than the wake of the ambient ions. Although water dumps produce the most persistent ion perturbations, the sources for ion current modification were best delineated from measurements made when only one or two of the Reaction Control System thrusters fired for a relatively long duration. Contaminant ion perturbations associated with such firings were observed to persist for the order of a second after the cessation of the firings. The dense thruster plumes are efficient collisional, charge exchange barriers to the passage of ambient ions. Collected ion current perturbations were more evident for firings of the rear verniers, whose plumes scatter off projecting surfaces, than for the nose thrusters. The effect of the Vernier firings was found to depend not only on the location and attitude of the spectrometer with respect to the shuttle and thruster plume direction, but also on the orientation of the local magnetic field with respect to the shuttle velocity.

Grebowsky, Joe M.↗
NASA NTRS1990

High-Latitude Communications Satellite (HILACS)

The Naval Postgraduate School in the AE 4871 Advanced Spacecraft Design course designed a communications satellite (HILACS) that will provide a continuous UHF communications link between stations located north of the region covered by geosynchronous communications satellites. The communications payload will operate only for that portion of the orbit necessary to provide specific coverage. The satellite orbit is elliptic with perigee at 1204 km in the Southern Hemisphere and an apogee at 14,930 km with 63.4 degrees inclination. Analysis and design of each of the subsystems was done to the extent possible within the constraints of an eleven week quarter and the design and analysis tools available. Work was completed in orbital analysis, the reaction control system, attitude control subsystem, electric power subsystem, telemetry, tracking, and control, thermal control subsystem, and the structures subsystem. The design team consisted of 12 students. Additional support was provided by the Jet Propulsion Laboratory and the Naval Research Laboratory.

Source record↗
NASA NTRS1991

Space shuttle propulsion systems

This is a presentation of view graphs. The design parameters are given for the redesigned solid rocket motor (RSRM), the Advanced Solid Rocket Motor (ASRM), Space Shuttle Main Engine (SSME), Solid Rocket Booster (SRB) separation motor, Orbit Maneuvering System (OMS), and the Reaction Control System (RCS) primary and Vernier thrusters. Space shuttle propulsion issues are outlined along with ASA program definition, ASA program selection methodology, its priorities, candidates, and categories.

Bardos, Russell↗
NASA NTRS1991

STV engine design considerations

The topics covered include the following: (1) engine design criteria and issues; (2) design requirements for man rating; (3) test requirements for man rating; (4) design requirements for space basing; (5) engine operation requirements; (6) health monitoring; (7) lunar transfer vehicle (LTV) feed system; (8) lunar excursion vehicle (LEV) propellant system; (9) area ratio gimbal angle limits; (10) reaction control system; and (11) engine configuration and characteristics. This document is presented in viewgraph form.

Source record↗
NASA NTRS1991

The power induced effects module: A FORTRAN code which estimates lift increments due to power induced effects for V/STOL flight

A user friendly FORTRAN code that can be used for preliminary design of V/STOL aircraft is described. The program estimates lift increments, due to power induced effects, encountered by aircraft in V/STOL flight. These lift increments are calculated using empirical relations developed from wind tunnel tests and are due to suckdown, fountain, ground vortex, jet wake, and the reaction control system. The code can be used as a preliminary design tool along with NASA Ames' Aircraft Synthesis design code or as a stand-alone program for V/STOL aircraft designers. The Power Induced Effects (PIE) module was validated using experimental data and data computed from lift increment routines. Results are presented for many flat plate models along with the McDonnell Aircraft Company's MFVT (mixed flow vectored thrust) V/STOL preliminary design and a 15 percent scale model of the YAV-8B Harrier V/STOL aircraft. Trends and magnitudes of lift increments versus aircraft height above the ground were predicted well by the PIE module. The code also provided good predictions of the magnitudes of lift increments versus aircraft forward velocity. More experimental results are needed to determine how well the code predicts lift increments as they vary with jet deflection angle and angle of attack. The FORTRAN code is provided in the appendix.

Sandlin, Doral R.↗
NASA NTRS1990

Ion mass spectrometer measurements from the Space Shuttle

Ion-mass-spectrometer measurements made, as part of the University of Iowa's Plasma Diagnostic Package, on the STS-3 and Spacelab 2 missions, sampled a variety of positive ion composition perturbations in response to gas emissions from the vehicle. A background of contaminant ion species (mostly relating to water) always exists in the vicinity of the Shuttle. The measured number fluxes of the contaminant ions vary differently from those of the ambient ions in response to changes in the spectrometer and spacecraft angles of attack. There is a near-Shuttle wake cavity in the contaminant ion distributions which has a different spatial configuration than the wake of the ambient ions. Although water dumps produce the longest term ion perturbations, the most well defined effects were observed from measurements taken during the short firings of the reaction-control-system thrusters.

Grebowsky, J. M.↗
NASA NTRS1991

Hydrogen reduction mechanisms of ilmenite between 823 and 1353 K

In situ gravimetric measurements and microscopic examinations were used to determine the mechanisms of oxygen removal from synthetic ilmenite disks between 823 and 1353 K. Under a hydrogen atmosphere, iron was observed to form a layer of low porosity on the surface of samples early in the reduction. This created diffusion limitations for hydrogen to the reaction front and for the escape of water vapor. A shrinking core reduction model, modified to include the growth of this iron film, was capable of predicting the conversion-time relationships of ilmenite samples. An activation energy of 43.2 +/- 2.6 kcal/gmole was determined to be representative of reaction control over the temperature range 823-1023 K.

Briggs, R. A.↗
NASA NTRS1991

Shuttle-C auxiliary propulsion system certification approach and low-cost evolution concepts

Shuttle-C provides NASA with a heavy-lift cargo capability that is a low-cost derivative of the current Space Shuttle. This system can deliver 80,000 to 140,000 pounds of payload to low earth orbit within 4 years of authority to proceed. Shuttle-C will share th existing Shuttle launch facilities at Kennedy Space Center (KSC). The Shuttle-C vehicle incorporates an auxiliary propulsion system (APS) which provides separation from the external tank (ET), orbit circularization, on-orbit attitude hold, and deorbit capability. The APS is derived from the Shuttle orbiter aft reaction control system (ARCS) and orbital maneuvering system (OMS) with the objective of achieving minimum life cycle cost for this expendable vehicle. The resulting APS system will be described, its plan for a minimum-cost flight certification utilizing a cold-flow test program explained, and low-cost evolution by component design modification and part substitution presented.

Harsh, M. George↗
NASA NTRS1991

Propulsion at the Marshall Space Flight Center - A brief history

The history of propulsion development at the NASA Marshall Space Flight Center is summarized, beginning with the development of the propulsion system for the Redstone missile. This course of propulsion development continues through the Jupiter IRBM, the Saturn family of launch vehicles and the engines that powered them, the Centaur upper stage and RL-10 engine, the Reactor In-Flight Test stage and the NERVA nuclear engine. The Space Shuttle Main Engine and Solid Rocket Boosters are covered, as are spacecraft propulsion systems, including the reaction control systems for the High Energy Astronomy Observatory and the Space Station. The paper includes a description of several technology efforts such as those in high pressure turbomachinery, aerospike engines, and the AS203 cyrogenic fluid management flight experiment. These and other propulsion projects are documented, and the scope of activities in support of these efforts at Marshall delineated.

Jones, L. W.↗
NASA NTRS1991

Taurus lightweight manned spacecraft Earth orbiting vehicle

The Taurus Lightweight Manned Spacecraft (LMS) was developed by students of the University of Maryland's Aerospace Engineering course in Space Vehicle Design. That course required students to design an Alternative Manned Spacecraft (AMS) to augment or replace the Space Transportation System and meet the following design requirements: (1) launch on the Taurus Booster being developed by Orbital Sciences Corporation; (2) 99.9 percent assured crew survival rate; (3) technology cutoff data of 1 Jan. 1991; (4) compatibility with current space administration infrastructure; and (5) first flight by May 1995. The Taurus LMS design meets the above requirements and represents an initial step towards larger and more complex spacecraft. The Taurus LMS has a very limited application when compared to the Space Shuttle, but it demonstrates that the U.S. can have a safe, reliable, and low cost space system. The Taurus LMS is a short mission duration spacecraft designed to place one man into low earth orbit (LEO). The driving factor for this design was the low payload carrying capabilities of the Taurus Booster--1300 kg to a 300 km orbit. The Taurus LMS design is divided into six major design sections. The human factors system deals with the problems of life support and spacecraft cooling. The propulsion section contains the abort system, the Orbital Maneuvering System (OMS), the Reaction Control System (RCS), and power generation. The thermal protection systems and spacecraft structure are contained in the structures section. The avionics section includes navigation, attitude determination, data processing, communication systems, and sensors. The mission analysis section was responsible for ground processing and spacecraft astrodynamics. The systems integration section pulled the above sections together into one spacecraft and addressed costing and reliability.

Chase, Kevin A.↗
NASA NTRS1992

Hydrazine monitoring in spacecraft

Hydrazine (HZ) and monomethyl hydrazine (MMH) are highly toxic compounds used as fuels in the Space Shuttle Orbiter Main Engines and in its maneuvering and reaction control system. Satellite refueling during a mission may also result in release of hydrazines. During extravehicular activities, the potential exists for hydrazines to contaminate the suit and to be brought into the internal atmosphere inadvertantly. Because of the high toxicity of hydrazines, a very sensitive, reliable, interference-free, and real-time method of measurement is required. A portable ion mobility spectrometer (IMS) has exhibited a low ppb detection limit for hydrazines suggesting a promising technology for the detection of hydrazines in spacecraft air. The Hydrazine Monitor is a modified airborne vapor monitor (AVM) with a custom-built datalogger. This off-the-shelf IMS was developed for the detection of chemical warfare agents on the battlefield. After early evaluations of the AVM for hydrazine measurements showed a serious interference from ammonia, the AVM was modified to measure HZ and MMH in the ppb concentration range without interference from ammonia in the low ppm range. A description of the Hydrazine Monitor and how it functions is presented.

Cross, J. H.↗
NASA NTRS1992

Fuel optimal propulsive reboost of flexible spacecraft

This paper presents for the first time an exact solution to the fuel optimal propulsive reboost problem for flexible spacecraft. The spacecraft undergoes rigid-body motion and flexible-body motion and reboost is achieved propulsively through the use of reaction control jets. The exact fuel optimal solution to the associated minimization problem is found numerically based on an adaptive grid bisection search. The reboost of the floating harmonic oscillator reveals properties of the fuel optimal solution. Nondimensional plots of minimum fuel versus maneuver time expose the nature of the solution classes depending on the maneuver time. Some very interesting properties are observed, among them, the shifting of impulses to the smaller oscillator mass, and comparisons are made with near fuel optimal solutions obtained by other investigators.

Silverberg, Larry↗
NASA NTRS1992

An expert system for monitoring dynamic aspects of RCS

An expert system (ARC) based on the MIMIC(2) framework is being developed for assistance in monitoring the Space Shuttle reaction control system (RCS) and in training RCS mission controllers. ARC has four components: a hypothesis generator, a model-constructor, a model-simulator and a matcher. The hypothesis generator examines current readings of sensors to generate a set of hypotheses. The model constructor generates models from these hypotheses. The simulator predicts future behaviors of the system. The matcher validates hypotheses by testing the predicted states against real data. The hypothesis generator postulates faults using model-based reasoning (MBR), learned rules from real data, and expert-defined rules. The simulator uses a qualitative QSIM model of the RCS which can handle both nominal modes as well as a variety of fault models. This allows the simulator to simulate the system even when one or more components have degraded. Finally, the matcher is responsible for comparing readings against predictions and calculating confidence in a particular hypothesis.

Kulkarni, Deepak↗
NASA NTRS1992

Minimizing spacecraft attitude disturbances in space manipulator systems

This paper presents a technique called the enhanced disturbance map to plan space manipulator motions that will result in relatively low spacecraft disturbances. This subject is of significant concern because future robotic systems used in space may encounter problems due to the dynamic disturbances imposed on their spacecraft by their manipulator motions. Although a spacecraft's attitude control reaction jets can compensate for these dynamic disturbances, jet fuel is a limited resource and excessive disturbances would limit the life of a system. The enhanced disturbance map can aid in understanding this complex problem and in the development of algorithms to reduce disturbances, including ones that use manipulator redundancy to eliminate the disturbances.

Torres, Miguel A.↗
NASA NTRS1991

Thruster configurations for maneuvering heavy payloads

The Cargo Transfer Vehicle (CTV) will be required to perform six degree of freedom (6 DOF) maneuvers while carrying a wide range of payloads varying from 100,000 lbm to no payload. The current baseline design configuration for the CTV uses a forward propulsion module (FPM) mounted in front of the payload with the CTV behind the payload so that the center of gravity (CG) of the combined stack is centered between the thruster sets. This allows for efficient rotations and translations of heavy payloads in all directions; however, the FPM is a costly item, so it is desirable to find design solutions that do not require the FPM. This presentation provides an overview of the analysis of the FPM requirements for the CTV. In this study, only the reaction control system (RCS) thruster configurations are considered for 6 DOF maneuvers of various CTV cargo configurations. An important output of this study are the viable alternative thruster configurations that eliminate the need for the FPM. Initial results were derived using analytical techniques and simulation analysis tools. Results from the preliminary analysis were validated using our 6 DOF simulation.

Tsugawa, Roy K.↗
NASA NTRS1991

Automating an orbiter approach to Space Station Freedom to minimize plume impingement

The Space shuttle orbiter Reaction Control System's (RCS) plume impingement during proximity operations with Space Station Freedom (SSF) is a structural design driver for the SSF solar panels and radiators. A study underway at JSC is investigating whether the use of an automated approach controller could result in the reduction of plume impingement induced loads during orbiter approach to SSF. Ongoing real time person-in-the-loop (PIL) simulations of an orbiter approaching the SSF show that orbiter trajectory control can vary significantly from one pilot to the next. This variation is a cause for concern since current analyses predict that plume impingement loads resulting from PIL orbiter approaches may exceed the solar panel and radiator load limits. The use of an automated approach controller is expected to reduce peak loads by both minimizing orbiter translational jet firings in certain directions and controlling the frequency at which they occur during various phases of the approach.

Spehar, Peter T.↗
NASA NTRS1991

Thruster configurations for maneuvering heavy payloads

The cargo transfer vehicle (CTV) will be required to perform six degree of freedom (6DOF) maneuvers while carrying a wide range of payloads varying from 100,000 lbm to no payload. The current baseline design configuration for the CTV uses a forward propulsion module (FPM) mounted in front of the payload and the CTV behind the payload so that the center of gravity (CG) of the combined stack is contained between the thruster sets. This allows for efficient rotation and translations of heavy payloads in all directions; however, the FPM is a costly item, so it is desirable to find design solutions which do not require the FPM. This presentation provides an overview of the work performed in analyzing the FPM requirements for the CTV. Specifically, key issues related to thruster configuration requirements for operating the CTV without the FPM, throughout the 100,000 lbm payload to no payload range, will be highlighted. In this study, only the reaction control system (RCS) thruster configurations are considered and the orbit adjust engines are not addressed. An important output of this study is the viable alternative thruster configurations which eliminate the need for the FPM. Initial results were derived using analytical techniques and simulation analysis tools. Results from the preliminary analysis were used as inputs for our 6DOF simulation. The 6DOF simulation was used to validate our design guidelines and to verify the performance of the thruster configurations.

Tsugawa, Roy K.↗