Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pressure effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

CFD Modeling of the Multipurpose Hydrogen Test Bed (MHTB) Self-Pressurization and Spray Bar Mixing Experiments in Normal Gravity: Effect of Accommodation Coefficient on the Tank Pressure

In this paper, a computational model that describes pressure control phase of a typical MHTB experiment will be presented. The fidelity of the model will be assessed by comparing the models predictions with MHTB experimental data. In this paper CFD results for MHTB spray bar cooling case with 50 tank fill ratio will be presented and analyzed. Effect of accommodation coefficient for calculating droplet-ullage mass transfer will be evaluated.

cryogenic fluid storage↗
NASA NTRS1977

Effects of solar radiation pressure on the orbit of the Solar Power Satellite

The surface area-to-weight ratio of the Solar Power Satellite (SPS) is of the order of sq m/kg. Therefore, solar radiation pressure will be an important perturbation on the orbit, causing large variations in eccentricity. An analytical solution is developed for the motion of eccentricity and the line of apsides. Included is a secular term due to the earth's orbital eccentricity. Several initial conditions are considered. For some cases, the eccentricity is nearly constant over a few years. General characteristics of the motion are discussed. Long-term (30 years) effects of gravity are investigated by using a numerical integration method. Eccentricities of approximately 0.08 can be expected for uncorrected SPS orbits.

Graf, O. F., Jr.↗
NASA NTRS1978

The kinetic effects of Alfven wave pressure in the solar wind

The results of a kinetic model for the radial evolution of the proton component of the solar wind in the presence of Alfven waves are presented. The calculation is based on general quasi-linear equations developed to describe the temporal and spatial evolution of the ion distribution functions of a multispecies plasma in presence of waves, using a short wavelength expansion. These equations include new wave-particle interaction terms arising from temporal and spatial inhomogeneities in the plasma. Numerical solutions are obtained of these equations specialized to the case of Alfven waves in a spherically symmetric solar wind. The Alfven wave effects on the proton distribution function vary strongly in velocity space. Protons with small transverse velocities are primarily decelerated with respect to the wave rest frame. This deceleration becomes less important with increasing transverse velocity, as wave induced diffusion to larger transverse velocity becomes the dominant effect. The competition of these effects results in interesting distortions of evolving proton distribution functions which give rise the wave acceleration well known from fluid theory.

Goodrich, C. C.↗
NASA NTRS1998

Transition Heat Transfer Modeling Based on the Characteristics of Turbulent Spots

While turbulence models are being developed which show promise for simulating the transition region on a turbine blade or vane, it is believed that the best approach with the greatest potential for practical use is the use of models which incorporate the physics of turbulent spots present in the transition region. This type of modeling results in the prediction of transition region intermittency which when incorporated in turbulence models give a good to excellent prediction of the transition region heat transfer. Some models are presented which show how turbulent spot characteristics and behavior can be employed to predict the effect of pressure gradient and Mach number on the transition region. The models predict the spot formation rate which is needed, in addition to the transition onset location, in the Narasimha concentrated breakdown intermittency equation. A simplified approach is taken for modeling turbulent spot growth and interaction in the transition region which utilizes the turbulent spot variables governing transition length and spot generation rate. The models are expressed in terms of spot spreading angle, dimensionless spot velocity, dimensionless spot area, disturbance frequency and Mach number. The models are used in conjunction with a computer code to predict the effects of pressure gradient and Mach number on the transition region and compared with VKI experimental turbine data.

Simon, Fred↗
NASA NTRS1955

Effect of high rotor pressure-surface diffusion on performance of a transonic turbine

The subject turbine was investigated to determine the effect of high rotor pressure-surface diffusion on turbine performance. A comparison of the subject turbine with the most efficient transonic turbine in the present series of investigations showed that the efficiency of the subject turbine was almost as high, the suction-surface diffusion parameter was about the same, and the solidity was reduced by 36 percent. Because the loss per blade increased greatly with an increase in pressure-surface diffusion, the latter is also considered to be an important design consideration.

Miser, James W↗
NASA NTRS1985

Geocoronal structure - The effects of solar radiation pressure and the plasmasphere interaction

The theory of planetary exospheres is extended to incorporate solar radiation pressure in a rigorous manner, and an evaporative geocoronal prototype (classical, motionless exobase) is constructed using Liouville's theorem. Model calculations for density and kinetic temperature at points along the earth-sun axis (solar and antisolar directions) reveal an extensive satellite component, comprising approximately 2/3 of the total hydrogen density near 10 earth radii, and a temperature profile suggestive of an isotropic quasi-Maxwellian velocity distribution for the bound component. A geotail is also evident as an enhancement of the density at local midnight compared to local noon that increases outward (from approximately 25 percent at 10 earth radii to over 60 percent at 20 earth radii). Additional mechanisms acting upon the geocorona alter the basic evaporative case in notable ways. Solar ionization has been included in a simple fashion; the effect is to partially deplete the density without otherwise altering the structure. Interaction with a simple plasmasphere via the Boltzmann equation results in 'heating' the geocorona and enhancing the escape flux at the expense of the density of the bound component, an effect not appreciated in earlier studies; the geotail survives this interaction.

Bishop, J.↗
NASA NTRS1987

Transonic analysis and design of axisymmetric bodies in nonuniform flow

An inviscid nonuniform axisymmetric transonic code was developed for applications in analysis and design. Propfan slipstream effect on pressure distribution for a body with and without sting was investigated. Results show that nonuniformity causes pressure coefficient to be more negative and shock strength to be stronger and more rearward. Sting attached to a body reduced the pressure peak and moves the rear shock forward. Extent and Mach profile shapes of the nonuniformity region appeared to have little effect on the pressure distribution. Increasing nonuniformity magnitude made pressure coefficient more negative and moved the shock rearward. Design study was conducted with the CONMIN optimizer for an ellipsoid and a body with the NACA-0012 counter. For the ellipsoid, the general trend showed that to reduce the pressure drag, the front portion of the body should be thinner and the contour of the rear portion should be flatter than the ellipsoid. For the design of a body with a sharp trailing edge in transonic flow with an initial shape given by the NACA-0012 contour, the pressure drag was reduced by decreasing the nose radius and increasing the thickness in the aft portion. Drag reduction percentages are given.

Chang, Jen-Fu↗
NASA NTRS1988

Effect of lower-body positive pressure on postural fluid shifts in men

The effect of the lower-body positive pressure (LBPP) on the orthostatic fluid and protein shifts were investigated in five men during combined tilt-table/antigravity suit inflation and deflation experiments. Changes in the mass densities of venous blood and plasma were measured and the values were used to calculate the densities of erythrocytes, whole-body blood, and shifted fluid. It was found that the application of 60 mm Hg LBPP during 60-deg head-up tilt prevented about half of the postural hemoconcentration occurring during passive head-up tilt.

Hinghofer-Szalkay, H.↗
NASA NTRS2006

Processing Raman Spectra of High-Pressure Hydrogen Flames

The Raman Code automates the analysis of laser-Raman-spectroscopy data for diagnosis of combustion at high pressure. On the basis of the theory of molecular spectroscopy, the software calculates the rovibrational and pure rotational Raman spectra of H2, O2, N2, and H2O in hydrogen/air flames at given temperatures and pressures. Given a set of Raman spectral data from measurements on a given flame and results from the aforementioned calculations, the software calculates the thermodynamic temperature and number densities of the aforementioned species. The software accounts for collisional spectral-line-broadening effects at pressures up to 60 bar (6 MPa). The line-broadening effects increase with pressure and thereby complicate the analysis. The software also corrects for spectral interference ("cross-talk") among the various chemical species. In the absence of such correction, the cross-talk is a significant source of error in temperatures and number densities. This is the first known comprehensive computer code that, when used in conjunction with a spectral calibration database, can process Raman-scattering spectral data from high-pressure hydrogen/air flames to obtain temperatures accurate to within 10 K and chemical-species number densities accurate to within 2 percent.

Nguyen, Quang-Viet↗
NASA NTRS2015

CFD Modeling of the Multipurpose Hydrogen Test Bed (MHTB) Self-Pressurization and Spray Bar Mixing Experiments in Normal Gravity: Effect of the Accommodation Coefficient on the Tank Pressure

A CFD model for simulating the self-pressurization of a large scale liquid hydrogen storage tank is utilized in this paper to model the MHTB self-pressurization experiment. The kinetics-based Schrage equation is used to account for the evaporative and condensi ng interfacial mass flows in this model. The effect of the accommodation coefficient for calculating the interfacial mass transfer rate on the tank pressure during tank selfpressurization is studied. The values of the accommodation coefficient which were considered in this study vary from 1.0e-3 to 1.0e-1 for the explicit VOF model and from 1.0e-4 to 1.0e-3 for the implicit VOF model. The ullage pressure evolutions are compared against experimental data. A CFD model for controlling pressure in cryogenic storage tanks by spraying cold liquid into the ullage is also presented. The Euler-Lagrange approach is utilized for tracking the spray droplets and for modeling the interaction between the droplets and the continuous phase (ullage). The spray model is coupled with the VOF model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. Droplet-ullage heat and mass transfer are modeled. The flow, temperature, and interfacial mass flux, as well as droplets trajectories, size distribution and temperatures predicted by the model are presented. The ul lage pressure and vapor temperature evolutions are compared with experimental data obtained from the MHTB spray bar mixing experiment. The effect of the accommodation coefficient for calculating the interfacial and droplet mass transfer rates on the tank pressure during mixing of the vapor using spray is studied. The values used for the accommodation coefficient at the interface vary from 1.0e-5 to 1.0e-2. The droplet accommodation coefficient values vary from 2.0e-6 to 1.0e-4.

cryogenic fluid storage↗