Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Precision orbit determination for the Geosat Exact Repeat Mission

Precise ephemerides have been determined for the U.S. Navy Geosat Exact Repeat Mission (ERM) using an improved gravity-field model, PTGF-4A (Shum et al. 1989). The Geosat orbits were computed in a terrestrial reference system which is tied to the reference system defined by satellite laser ranging (SLR) to Lageos through a survey between the Tranet Doppler receiver and the SLR system located at Wettzell, FRG. The remaining Doppler tracking station coordinates were estimated simultaneously with the geopotential in the PTGF-4A solution. In this analysis, three continuous 17-day Geosat orbits, which were computed using the 46-station Tranet data and global altimeter crossover data, have a crossover residual rms of 20 cm, indicating that the Geosat radial orbit error is of the order of 20 cm. The orbits computed based on data collected by a 7-station OPNET tracking network and crossover data have the same level of accuracy.

Shum, C. K.↗

NASA's Precision Segmented Reflectors (PSR) project

The PSR project representing a step toward developing the technology base needed to support future advanced astrophysics missions is described. The project is focused on producing high precision lightweight panels, large structures with proven erectability and accuracy, and lightweight and low power controls capable of achieving a high degree control of accuracy. Panels of sizes from 0.4 to 0.9 meter are fabricated to verify various design concepts for improving panel surface accuracy; in particular, a 0.4 meter panel is fabricated and refinished to a high degree of accuracy.

Pawlik, E.↗

Materials development for precision segmented reflector applications

The requirements developed to guide the selection of current and future materials for precision segmented reflectors are presented along with a list of desirable properties. Some potential candidate materials including modified fiber reinforced organic matrix composites as well as carbon/carbon composites, graphite/glass composites, and metal matrix composites are identified. It is noted that in the near term, it is likely that modified fiber reinforced organic matrix composites have good applicability. In the longer term, materials such as carbon/carbon composites, graphite/glass composites and metal matrix composites may provide the best mix of properties.

Coulter, Daniel R.↗

Support trusses for large precision segmented reflectors - Preliminary design and analysis

The Precision Segmented Reflector (PSR) primary structures plan is outlined. Geometries and design considerations for erectable and deployable reflector support structures are discussed. Support truss requirements and goals for the PSR are given, and the results of static and dynamic analyses of a prototype four meter diameter structure are presented. In addition, similar results are presented for two 20-meter diameter support trusses. Implications of the analyses for the PSR program are considered and the formulation and limitations of current PSR finite element models are discussed. It is shown that if the secondary optical system is supported by a simple tripod design, the first six vibration modes are likely to be dominated by the secondary system. The 20-meter diameter support trusses are found to be quite stiff for structures of such large size.

Collins, Timothy J.↗

Ground-based testing of Precision Segmented Reflectors - PSR in the ground test environment

Recent PSR test experiences including panel surface error measurements and a truss beam experiment are covered. Principal environmental concerns, such as one-g condition, ambient microseismic environment, acoustic environment and thermal environment for the PSR testbed are analyzed. Results of the analysis and their implications for ground-based testing of large precision segmented optical systems are presented.

Satter, C. M.↗

Vibration suppression for precision segmented reflector backup structure

An ongoing effort at the JPL on vibration suppression for the Precision Segmented Reflector backup structure is centered on the vibration damping augmentation through a system consisting of active and passive damping members. An active member is a structural member with built-in piezoelectric actuator and sensors. An efficient method was developed for optimal placement of active and passive damping members in the truss-type backup structure. A simple synergistic model between the active and passive damping was proposed based on a weighted energy dissipation criterion. A baseline passive member design with constrained viscoelastic material treatment was used as the source of passive damping.

Chen, G.-S.↗

Precision Segmented Reflector figure control system architecture

A control system architecture for an actively controlled segmented reflector is described along with a design realization for achieving precision alignment of reflector panels. Performance requirements are derived in part from the Large Deployable Reflector, which is a representative mission, and error allocations are made which consider mirror panel surface errors, position measurement and figure estimation, and position control of both quasi-static and dynamic disturbances. The design uses multiple wavelength interferometric edge sensors and voice coil actuators in conjunction with a hybrid control strategy to correct panel position errors. A unit cell shown to be central to the concept is analyzed. The cell integrates the sensing, actuation, and mechanical functions of a control module together with a reflector panel to form a unitized assembly.

Mettler, E.↗

Variable conductance heat pipe technology for precise temperature control of the NASA/DDLT transmitter

The application of variable conductance heat pipe technology for achieving precise temperature control to + or - 0.1 C for a space-based laser diode transmitter is described. Heat pipe theory of operation and test data are presented along with a discussion of its applicability for NASA's Direct Detection Laser Transceiver (DDLT) program. This design for the DDLT transmitter features a reduction in space radiator size and up to 42 percent reduction in prime power requirements.

Vanevenhoven, D. E.↗

High precision lunar tracking for laser ranging

Laser ranging to lunar surface retroreflectors has provided a valuable source of data for the investigation of the lunar orbit, the earth's orientation in space, general relativity, and many other aspects of solar system dynamics. Due to the moon's relatively large distance, and the requirement to keep the beam from the relatively low-power laser very narrow, acquiring this data type requires very accurate telescope pointing and tracking capabilities. The nominal requirement is to keep the telescope on target within approximately 1 arcsec of its predicted location for at least several minutes. An expansion of this requirement and the methods used to accomplish this high precision pointing are presented. Difficulties encountered and a few future goals of automating the McDonald station are also discussed.

Ricklefs, Randall L.↗

Modeling issues in precision orbit determination for Mars orbiter

This paper examines the accuracy of recent Mars gravity models and the importance of perturbations due to the Mars radiation pressure and the Martian moons, Phobos and Deimos, on the trajectories of Mars orbiters. A linear orbit perturbation theory is used to characterize the patterns of gravity field near resonances for the Viking and Mariner 9 spacecraft. These resonances are shown to have considerable power and their potential for contributing to Mars gravity solutions is emphasized. It is shown that some of the same resonance orders which appear in the Viking orbits, dominate the radial orbit error spectrum for Mars Observer. Results of orbit determination simulations at the Goddard Space Flight Center show that the perturbations caused by the Martian moons and the Mars radiation pressure are larger than 0.1 mm/s, the expected precision of the Mars Observer Doppler tracking data. Tests with the Viking Doppler data indicate that best analysis of these data mandates the inclusion of the Phobos gravitational perturbation in the modeling of Viking spacecraft trajectories.

Lemoine, Frank G.↗

High-precision orbit determination for high-earth elliptical orbiters using the Global Positioning System

Orbit covariance analyses pertaining to the Japanese VLBI Space Observatory Program (VSOP) MUSES-B satellite and to the International VLBI Satellite are presented. It is determined that a combination of Doppler and GPS measurements can provide the orbit accuracy required to support advanced radio interferometric experiments. For the VSOP, the required orbit accuracy of 130 m is easily met with two-way Doppler as the primary type of data; the 0.4 cm/s VSOP velocity requirement is also feasible provided that precise ground calibrations of tropospheric delays and station coordinates are available. It is concluded that combining the data from a VSOP GPS flight instrument with the ground GPS and two-way Doppler data will significantly enhance orbit determination accuracy in position and velocity.

Lichten, S. M.↗

Precise Autohover Control For A Helicopter

Report describes development and testing of experimental precise autohover control system for helicopter. Attempts to maintain constant horizontal position. Part of continuing effort to develop such systems for next generation of military rotorcraft.

Hindson, W. S.↗

Some Insights on Solar Variability from Precision Stellar Astronomical Photometry

At Lowell Observatory, precision photoelectric photometry was directed toward the study of solar variability and the variability of sun-like stars beginning in 1949 and continuing until now. The ubiquity and range of low-level variability, including some that appears to be cyclic, among solar-type stars shows that recent solar variability may be unusual only in its present restraint.

Lockwood, G. W.↗

Five degree-of-freedom control of an ultra-precision magnetically-suspended linear bearing

The authors constructed a high precision linear bearing. A 10.7 kg platen measuring 125 mm by 125 mm by 350 mm is suspended and controlled in five degrees of freedom by seven electromagnets. The position of the platen is measured by five capacitive probes which have nanometer resolution. The suspension acts as a linear bearing, allowing linear travel of 50 mm in the sixth degree of freedom. In the laboratory, this bearing system has demonstrated position stability of 5 nm peak-to-peak. This is believed to be the highest position stability yet demonstrated in a magnetic suspension system. Performance at this level confirms that magnetic suspensions can address motion control requirements at the nanometer level. The experimental effort associated with this linear bearing system is described. Major topics are the development of models for the suspension, implementation of control algorithms, and measurement of the actual bearing performance. Suggestions for the future improvement of the bearing system are given.

Trumper, David L.↗

Delivery and application of precise timing for a traveling wave powerline fault locator system

The Bonneville Power Administration (BPA) has successfully operated an in-house developed powerline fault locator system since 1986. The BPA fault locator system consists of remotes installed at cardinal power transmission line system nodes and a central master which polls the remotes for traveling wave time-of-arrival data. A power line fault produces a fast rise-time traveling wave which emanates from the fault point and propagates throughout the power grid. The remotes time-tag the traveling wave leading edge as it passes through the power system cardinal substation nodes. A synchronizing pulse transmitted via the BPA analog microwave system on a wideband channel sychronizes the time-tagging counters in the remote units to a different accuracy of better than one microsecond. The remote units correct the raw time tags for synchronizing pulse propagation delay and return these corrected values to the fault locator master. The master then calculates the power system disturbance source using the collected time tags. The system design objective is a fault location accuracy of 300 meters. BPA's fault locator system operation, error producing phenomena, and method of distributing precise timing are described.

Street, Michael A.↗

Precise orbit determination of high-earth elliptical orbiters using differenced Doppler and range measurements

Recent advances in Deep Space Network station calibration methods have led to renewed interest in the use of differenced Doppler and range data types for interplanetary navigation. Described here is an orbit determination error analysis of the performance of these differenced data types when used with conventional two-way Doppler for precise navigation of High-Earth Orbiters. Three highly elliptical Earth orbits are investigated, with apogee heights on the order of 20,000 km, 70,000 km, and 156,000 km. Results indicate that the most significant navigational accuracy improvements, relative to the performance obtained from two way Doppler alone, are achieved for the lowest altitude orbit by using differenced Doppler measurements with two way Doppler (assuming that spacecraft onboard downlink antennas have no ground footprint limitation in the near-apogee regime). In the case of the two higher altitude orbits, accuracy improvements over Doppler-only performance, although less dramatic, are also achieved when differenced range measurements are combined with two-way Doppler.

Estefan, J. A.↗

Active structures for use in precision control of large optical systems

This paper discusses the application of active structures technology to the control of precision structures for future space-based astrophysics observatories. The state of the art in active structures is reviewed and technology developments applicable to large optical systems are discussed.

Fanson, James L.↗

Precisely measuring the distance to the moon

Continuing improvements in the lasers and the detection electronics over the years which have led to accurate measurements of the distance from the earth to the moon are discussed. The first reflector of laser light pulses, deployed on the moon surface twenty years ago by the Apollo 11 astronauts, consisted of 100 fused silica corner cubes, and reflected a beam of light directly back toward its point of origin. Observatories located in Texas, Hawaii, and France now regularly range the moon with an accuracy of approximately 1 inch. Ranging programs have also been carried out in Australia and the Soviet Union. The ranges are computer-analyzed to determine precisely the positions of the observatories on earth, the positions of the reflectors on the moon, the orbit of the moon around the earth, and the rotation and orientation of the earth and the moon. The most important scientific advances derived from lunar ranging are also reviewed.

Faller, J. E.↗