SEARCH · Engineering Papers

Results for “Polarity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Comparison of transverse single-spin asymmetries for forward π 0 production in polarized pp , p Al and p Au collisions at nucleon pair c.m. energy √sNN=200 GeV

The STAR collaboration reports a measurement of the transverse single-spin asymmetries, A N , for neutral pions produced in polarized proton collisions with protons ( p p ), with aluminum nuclei ( p Al ) and with gold nuclei ( p Au ) at a nucleon-nucleon center-of-mass energy of 200 GeV. Neutral pions are observed in the forward direction relative to the transversely polarized proton beam, in the pseudorapidity region 2.7 < η < 3.8 . Results are presented for π 0 s observed in the STAR forward meson spectrometer electromagnetic calorimeter in narrow Feynman x ( x F ) and transverse momentum ( p T ) bins, spanning the range 0.17 < x F < 0.81 and 1.7 < p T < 6.0 GeV / c . For fixed x F < 0.47 , the asymmetries are found to rise with increasing transverse momentum. For larger x F , the asymmetry flattens or falls as p T increases. Parametrizing the ratio r ( A ) ≡ A N ( p A ) / A N ( p p ) = A P over the kinematic range, the ratio r ( A ) is found to depend only weakly on A , with ( P ) = - 0.027 ± 0.005 . No significant difference in P is observed between the low- p T region, p T < 2.5 GeV / c , where gluon saturation effects may play a role, and the high- p T region, p T > 2.5 GeV / c . It is further observed that the value of A N is significantly larger for events with a large- p T isolated π 0 than for events with a nonisolated π 0 accompanied by additional jetlike fragments. The nuclear dependence r ( A ) is similar for isolated and nonisolated π 0 events.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Multistate Geometry of Shift Current and Polarization

The quantum metric and Berry curvature capture essential properties of nontrivial Bloch states and underpin many fascinating phenomena. However, it becomes increasingly evident that a more comprehensive understanding of quantum state geometry is necessary to explain properties involving Bloch states of multiple bands, such as optical transitions. To this end, we employ quantum state projectors to develop an explicitly gauge-invariant formalism and demonstrate its power with applications to nonlinear optics and the theory of electronic polarization. We provide a simple expression for the shift current that resolves its precise relation to the moments of electronic polarization, clarifies the treatment of band degeneracies, and reveals its decomposition into the sum of the skewness of the occupied states and intrinsically multistate geometry. The projector approach is applied to calculate nonlinear optical properties of transition metal dichalcogenides (TMDs) layers, using previously calculated minimal tight-binding models, and demonstrated analytically on a three-band generalization of the Rice-Mele chain to elucidate the different contributions. We close with comments on further applications of the projector operator approach to multistate geometry.

electric polarization↗

DOE OSTI2025

Hydrogen density mapping in biomolecular crystals through dynamic nuclear polarization

Many fundamental biological processes, including those in photosynthetic reaction centers and enzyme active sites, involve charge and energy transfer, bond cleavage, protonation and hydrogen bonding. Because H atoms play such central roles in these reactions, accurately determining their positions is essential. Yet, conventional X-ray crystallography primarily resolves the heavy atoms in biological structures and provides limited insight into hydrogen, even at atomic resolution. Neutron macromolecular crystallography (NMC) overcomes this limitation by offering exceptional sensitivity to hydrogen and deuterium. Here, we present a theoretical framework for the development of dynamic nuclear polarization NMC (DNP-NMC) techniques, which exploit the alignment of neutron and proton nuclear spins to enhance and tune the hydrogen signal contribution. The DNP-NMC approach advances the resolution of H atoms within biomolecular crystals, whether bound to protein residues or present in solvent. The method establishes key relationships for the coherent structure factor of polarized neutron scattering from hydrogenous matter. It theoretically achieves full accuracy in phase reconstruction and offers a path to improve neutron structure determination, achieving accuracies exceeding ≳80% by incorporating titration states. Using a variant of the hybrid input/output phase-retrieval algorithm, it allows recovery of the hydrogen density with ≳90% phase accuracy. In conclusion, we further discuss sources of experimental uncertainty for the upcoming DNP-enabled, quasi-Laue IMAGINE-X experiment at Oak Ridge National Laboratory's High Flux Isotope Reactor.

dynamic nuclear polarization↗

DOE OSTI2025

Potential for tensor polarized deuterons in Hall D at Jefferson lab

Hall D at Jefferson lab is an ideal place to install a polarized deuteron target which can be “tensor polarized”, allowing the separation of the spin states m = 0, ±1 or the measurement of tensor asymmetries. The bremsstrahlung photon beam with 3 - 12 GeV endpoint provides very little heating or radiation damage compared to an electron beam, allowing the target to be run in frozen spin mode. Adiabatic fast passage spin manipulations can then be used to greatly enhance the population of the m = 0 spin state of the deuteron. Coherent photoproduction of ρ mesons from deuterium is sensitive to double-scattering at high momentum transfer and in the m = 0 spin state an additional sensitivity at intermediate momentum transfer opens up. In conclusion, we propose a frozen spin target for Hall D and the measurement of ρ photoproduced coherently from the deuteron as a flagship measurement.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Pore-Scale Simulation of Spectral Induced Polarization

A new model was developed to simulate spectral induced polarization (SIP) in porous media. The model is based on a pore-network approximation of the soil or rock, in which bonds between pores are represented by equivalent circuits. In the circuit model, electrolytic and surface conduction occur in parallel, with the electrolyte behaving as a single resistor, and the mineral surface behaving as a resistor and capacitor in series. Based on the pore geometry, fluid conductivity, and mineral surface conductivity, an impedance network is generated. SIP spectra are calculated by solving the sinusoidal steady-state electrical problem for a range of frequencies. The new model provides a tool to bridge the gap between (1) our fundamental understanding of polarization processes at the scale of a single pore or grains and (2) existing simulation capabilities for macroscale systems that do not account for pore-scale properties. The model is implemented in Matlab and can solve two-dimensional and three-dimensional (2D and 3D) networks. Examples for regular cubic lattices are presented, but the method and code are flexible with respect to pore geometries and allow for future leveraging of existing open-source capabilities for generation of pore networks and extraction of network geometries from micro imaging of core samples.

58 GEOSCIENCES↗

DOE OSTI2025

Hybrid Quantum Networks with Discrete Polarizations and Continuous Quadrature Variables

Final Scientific/Technical Report for DOE Project DE-SC0022069. Quantum communication and computation systems have evolved along two largely independent paradigms: discrete-variable (DV) systems that encode information in qubits such as photon polarizations or photon-number states, and continuous-variable (CV) systems that encode information in optical field quadratures. Each approach offers distinct advantages—DVs provide low error rates and compatibility with single-photon platforms, while CVs support deterministic operations and efficient quantum state manipulation. A fundamental challenge for building a scalable Quantum Internet lies in interfacing these two regimes into a unified hybrid architecture that can coherently distribute and process quantum information across heterogeneous quantum nodes. This project aims to develop and demonstrate a hybrid optical quantum network that seamlessly integrates DV and CV systems. Specifically, we investigate a new class of hybrid entanglement between the discrete polarizations of single photons and the continuous quadrature variables of optical cat states, overcoming incompatibilities in existing DV–CV demonstrations. Using this new entanglement resource, the team investigates a multi-node hybrid quantum local area network (Q-LAN) testbed capable of DV–CV entanglement generation, swapping, and distribution across fiber links.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2021

Siberian Snakes, Figure-8 and Spin Transparency Techniques for High Precision Experiments with Polarized Hadron Beams in Colliders

We present a review of the possibilities to conduct experiments of high efficiency in the nuclear and high energy physics with spin-polarized beams in a collider complex, configuration of which includes Siberian snakes or figure-8 collider ring. Special attention is given to the recently elicited advantageous possibility to conduct high precision experiments in a regime of the spin transparency (ST) when the design global spin tune is close to zero. In this regime, the polarization control is realized by use of spin navigators (SN), which are compact special insertions of magnets dedicated to a high flexibility spin manipulation including frequent spin flips.

43 PARTICLE ACCELERATORS↗

DOE OSTI2020

CosTuuM: Polarized Thermal Dust Emission by Magnetically Oriented Spheroidal Grains

We present the new open-source C++-based Python library CosTuuM that can be used to generate infrared absorption and emission coefficients for arbitrary mixtures of spheroidal dust grains that are (partially) aligned with a magnetic field. We outline the algorithms underlying the software, demonstrate the accuracy of our results using benchmarks from literature, and use our tool to investigate some commonly used approximative recipes. We find that the linear polarization fraction for a partially aligned dust grain mixture can be accurately represented by an appropriate linear combination of perfectly aligned grains and grains that are randomly oriented, but that the commonly used picket fence alignment breaks down for short wavelengths. We also find that for a fixed dust grain size, the absorption coefficients and linear polarization fraction for a realistic mixture of grains with various shapes cannot both be accurately represented by a single representative grain with a fixed shape, but that instead an average over an appropriate shape distribution should be used. Insufficient knowledge of an appropriate shape distribution is the main obstacle in obtaining accurate optical properties. CosTuuM is available as a standalone Python library and can be used to generate optical properties to be used in radiative transfer applications.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Design and Performance Analysis of a Highly Efficient Polychromatic Full Stokes Polarization Modulator for the CRISP Imaging Spectrometer

We present the design and performance of a polychromatic polarization modulator for the CRisp Imaging SpectroPolarimeter (CRISP) Fabry–Perot tunable narrow-band imaging spectropolarimer at the Swedish 1 m Solar Telescope (SST). We discuss the design process in depth, compare two possible modulator designs through a tolerance analysis, and investigate thermal sensitivity of the selected design. The trade-offs and procedures described in this paper are generally applicable in the development of broadband polarization modulators. The modulator was built and has been operational since 2015. Its measured performance is close to optimal between 500 and 900 nm, and differences between the design and as-built modulator are largely understood. We show some example data, and briefly review scientific work that used data from SST/CRISP and this modulator.

42 ENGINEERING↗

DOE OSTI2026

W-Band ARM Scanning Cloud Radar (WSACR) 2nd Generation CF-Radial Spectral Data, Vertically-Pointing Scan, Co-Polarization Mode (a1)

ARM's scanning cloud radars are fully coherent dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (WSACR; 1.7 kW peak power) or X-band (XSACR; 20 kW peak power). Beamwidths at Ka and W bands are roughly matched at 0.3 degrees. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies that are unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the Ka-SACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. Measurements collected with the W-SACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, and linear depolarization ration.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Ka-Band Scanning ARM Cloud Radar (KASACR), 2nd Generation CF-Radial Spectral Data, Vertically-Pointing Scan, Cross-Polarization Mode (a1-level)

The Ka-Band Scanning ARM Cloud Radar (KASACR) records cloud properties. ARM's scanning cloud radars are dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (1.7 kW peak power) or an X-band (20 kW peak power). Beamwidths for Ka-bands paired with W-bands are roughly matched at 0.3 degrees. The X-band beamwidth is approximately 1 degree. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the KASACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. Measurements collected with the KASACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, and linear depolarization ratio. KASACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

W-Band ARM Scanning Cloud Radar (WSACR) 2nd Generation CF-Radial Spectral Data, Vertically-Pointing Scan, Cross-Polarization Model (a1)

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Highly Anisotropic Quasi‐Direct Organic Metal Halide Hybrids: A Platform for Polarization‐Sensitive Optoelectronics

Low-dimensional organic–inorganic metal halide hybrids (OMHHs) exhibit remarkable optical properties and enhanced environmental stability. We investigate a 1D OMHH with formula C 4 N 2 H 14 PbBr 4 , consisting of Pb–Br chains separated by organic cations, which shows a large Stokes shift (0.83 eV) and broadband emission. Through first-principles calculations and polarized Raman spectroscopy, we characterize the material's vibrational properties and identify the specific phonon modes that drive exciton self-trapping. Our novel GW/Bethe-Salpeter equation force formalism reveals that low-frequency phonons (∼ 100 cm −1 , primarily involving Pb–Br motions) couple strongly with excitons, with a remarkably high Huang-Rhys factor of 137 ± 4, and gives a pathway for ultrafast structural analysis during the absorption process. This phonon-exciton coupling mechanism explains the material's broadband emission and provides a pathway for controlling optical properties through vibrations and for tuning vibrations through optical excitations. The material also exhibits highly anisotropic optical properties and electronic transport, with bands that are dispersive along the Pb–Br chains but nearly flat in perpendicular directions, resulting in direction-dependent electrical conductivity that is calculated to be an order of magnitude higher along the chain direction and consistent with measurements. These combined properties make this system an excellent platform for polarization-sensitive optoelectronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Transient Terahertz Oscillations During Photoinduced Polarization Topology Reconfiguration in Ferroelectric Superlattices

Terahertz resonances embedded in crystalline heterostructures could close a spectral gap between conventional electronics and photonics while opening new windows on non-equilibrium lattice dynamics. We show that femtosecond optical screening of the depolarization field in epitaxial PbTiO3/SrTiO3 superlattices launches a collective polar mode that oscillates near 1 THz and coherently spans the entire mini-Brillouin zone. Wave-vector-resolved pump–probe X-ray diffraction resolves a nearly dispersion-less oscillation at 0.87 THz and 0.94 THz at the zone boundary and zone center, respectively, persisting for ~2.5 ps, corresponding to a weakly damped resonance. Dynamical phase-field simulations reveal the origin of the mode to mesoscopic rotation of closure-domain textures during the photo-excited transition from an unscreened to a screened electrostatic state. Varying the PbTiO3 and SrTiO3 ratio tunes the mode frequency continuously from 0.9 to 1.4 THz, providing a quantitative design rule for frequency-selectable THz oscillators in ferroelectric heterostructures. By coupling nanoscale polarization reconfiguration to long-wavelength coherent dynamics, this work establishes depolarization-field engineering to topology-driven THz functionality and expanding the landscape of collective lattice dynamics.

Sri Gyan, Deepankar [Univ. of Wisconsin, Madison, ↗

DOE OSTI2023

Turn‐on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Abstract Introducing chirality into the metal‐halide hybrids has enabled many emerging properties including chiroptical activity, spin‐dependent transport, and ferroelectricity. However, most of the chiral metal‐halide hybrids to date are non‐emissive, and the underlying mechanism remains elusive. Here, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal‐halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium‐chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium‐antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 −2 . Mechanistic studies reveal that the emission originates from the self‐trapped excitons centered in 5s 2 Sb 3+ . Moreover, near‐ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal‐halide hybrids.

Wang, Zhiyu↗

DOE OSTI2022

Turn-on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Introducing chirality into the metal-halide hybrids has enabled many emerging properties including chiroptical activity, spin-dependent transport, and ferroelectricity. However, most of the chiral metal-halide hybrids to date are non-emissive, and the underlying mechanism remains elusive. Here, in this study, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal-halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium-chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium-antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 -2 . Mechanistic studies reveal that the emission originates from the self-trapped excitons centered in 5s 2 Sb 3+ . Moreover, near-ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal-halide hybrids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Molten Salts-Driven Discovery of a Polar Mixed-Anion 3D Framework at the Nanoscale: Zn 4 Si 2 O 7 Cl 2 , Charge Transport and Photoelectrocatalytic Water Splitting

Mixed-anion compounds widen the chemical space of attainable materials compared to single anionic compounds, but the exploration of their structural diversity is limited by common synthetic paths. Especially, oxychlorides rely mainly on layered structures, which suffer from low stability during photo(electro)catalytic processes. Herein we report a strategy to design a new polar 3D tetrahedral framework with composition Zn 4 Si 2 O 7 Cl 2 . We use a molten salt medium to enable low temperature crystallization of nanowires of this new compound, by relying on tetrahedral building units present in the melt to build the connectivity of the oxychloride. These units are combined with silicon-based connectors from a non-oxidic Zintl phase to enable precise tuning of the oxygen content. This structure brings high chemical and thermal stability, as well as strongly anisotropic hole mobility along the polar axis. These features, associated with the ability to adjust the transport properties by doping, enable to tune water splitting properties for photoelectrocatalytic H 2 evolution and water oxidation. This work then paves the way to a new family of mixed-anion solids

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

High‐Performance Al–S Batteries by Spin Polarization Modulation via Catalytic Ni‐MoS 2 Nanosheets

Aluminum–sulfur (Al–S) batteries catalysts with adsorption and catalytic capabilities can effectively improve the slow redox kinetics, but the current research often ignores the effect of optimizing the electronic structure of the catalyst on improving charge transfer and adsorption. Here, in this study, Ni-doped monolayer MoS 2 nanosheets are synthesized and used as a catalytic additive for the sulfur cathode. The addition of Ni promotes spin splitting of 4d orbital of Mo, thereby affecting polarization degree of the basal plane sulfur and making it change from a low spin state to a high spin one. This high spin configuration raises the electron energy level and provides an active electron state to react with aluminum polysulfides (AlPSs), which optimizes the adsorption energy. At the same time, it accelerates electron transfer and lowers the energy barrier for the overall conversion of the polysulfides. Benefiting from these features, Al–S batteries based on rationally designed S@Ni-MoS 2 /C cathodes exhibit a high initial capacity (1603.0 mAh g −1 at 0.5 A g −1 ) and extraordinary cycling stability (0.035% capacity decay rate during 2000 cycles). This study showcases a spin-polarized electronic structure control strategy to enhance catalytic activity, providing a viable approach for developing efficient catalysts for practical Al–S batteries.

Aluminum-sulfur batteries↗