Results for “PLUMES” — Page 40

NASA NTRSDate not supplied

Overview of the Predictive Simulation Capability Element of the Plume Surface Interaction Project

As part of the Game Changing Development (GCD) Program, funded by NASA’s Space Technology Mission Directorate (STMD), the development of simulation capability for the prediction of extra-terrestrial Plume Surface Interaction (PSI) environments has been undertaken by the Fluid Dynamics Branch at NASA/MSFC. The GCD PSI Project, planned to be completed over a four year period, contains a Predictive Simulation Capability (PSC) Element focused on creating simulation capability for the reliable and accurate prediction of PSI in Martian (~650 Pa) and Lunar (vacuum) ambient environments. In addition to the PSC Element, the GCD Program also contains a companion Ground Testing Element for development of focused datasets for validation of predictive capability as well as a Flight-focused Instrumentation Element. This paper describes the PSC Element of the PSI Project as well as providing descriptions of recent accomplishments and remaining work. The overall structure of the PSC Element is broken down into four areas of focus. The first area is the Prediction of Plume Flow in low pressure environments. The development approach taken is the augmentation of the existing production-mode computational fluid dynamics (CFD) tool Loci/Chem, with targeted extensions necessary to accurately model rarefied conditions found in both Martian and Lunar applications. Production readiness and validation of predictive capability are the major objectives of this task. The second area is the effect of mixed continuum/rarefied flow on crater development and ejecta sheets. A new CFD application, Loci/GGFS (Gas Granular Flow Solver), is being developed which implements an Eulerian/Eulerian two-phase model of gas- and soil-phases in order to simulate the soil erosion, crater formation, and soil ejecta transport in a fully coupled simulation. This task seeks to verify Loci/GGFS is production-ready as well as perform validation studies to determine the degree of predictive capability achieved by Loci/GGFS. The third area is focused on the details and extension of particle phase modeling of soil. In this task, Discrete Element Modeling (DEM) techniques are used to perform direct simulations of complex soil particles under the action of forcing similar to that to be cause by PSI. The simulation results are then used to construct closures to the Eulerian model of the soil phase used by Loci/GGFS. The fourth area is gas-particle interaction modeling. In this task, experiments are being conducted as well as detailed simulation results are being studied to further understand the complexities of gas-particle interactions in dilute, intermediate, and high soil volume fraction regimes. Improved models of particle drag and the particle turbulent kinetic energy (PTKE) resulting from the interaction of gas flows within particle clouds are the objective of this task.

Jeff West↗

NASA NTRSDate not supplied

Particle Interaction Physics Model Formulation for Plume-Surface Interaction Erosion and Cratering

As part of the Game Changing Development (GCD) Program, funded by NASA’s Space Technology Mission Directorate (STMD), the development of simulation capability for the prediction of extra-terrestrial Plume Surface Interaction (PSI) environments has been undertaken by the Fluid Dynamics Branch at NASA/MSFC. The Predictive Simulation Capability (PSC) Element is focused on creating simulation capability for the reliable and accurate prediction of PSI in Martian (~650 Pa) and Lunar (vacuum) ambient environments. In addition to the predictive simulation capability, the GCD Program also contains a companion Ground Testing Element for development of focused datasets for validation of predictive capability as well as a Flight-focused Instrumentation Element. This paper will present the status of implementing and maturing particle-particle interaction constituent physics models essential in simulating the landing surface granular material flow under PSI effects. This gas-particle multi-phase interaction modeling of plume impingement flow on the extra-terrestrial soil material is performed with the Gas-Granular Flow Solver (GGFS) addressed in a companion paper. The response of regolith particle flow induced by lander PSI requires accurate representation of the regolith granular material fluidic behavior and gas-granular interactions. The lunar regolith, as the extreme example, is poorly sorted with broad particle size distributions and large fines content. It has significant cohesion, due to interlocking particle shapes for the very jagged particles. The combination of particle shape and size distribution has been identified as major drivers in the complex particle flow response and resulting crater shape characteristics of extraterrestrial granular material. Constituent models for spherical particles can be formulated directly from particle kinetics theory. Complex particle shapes can be modeled by gluing together elemental spherical shapes into composite particles, requiring a Discrete Element Model (DEM) particle kinetics modeling approach to extract data and formulate constituent models. Mixture constituent models for poly-disperse mixtures (i.e, containing distribution of particle sizes) have recently been developed. The required non-spherical particle mixture granular material response closure models are then obtained through small-scale unit physics DEM simulations for the range of particle shapes, mixtures and packing densities. The granular material response closure models are then implemented in the Eulerian granular flow formulation. This DEM-based constituent model extraction process and formulation of poly-disperse particle mixtures has been successfully developed by small business and academic partners in the development of the Gas-Granular Flow Solver (GGFS) simulation program simulation framework. The currently implemented capabilities have reached the capability level of modeling bi-disperse, non-spherical particle mixtures is being continuously extended towards computational modeling of full range irregular particle mixtures. Under the GCD project, this technology is being further developed, transferred to NASA analysts, and matured towards application readiness. The predictive simulation capability team under the GCD project has acquired the modeling tools and processes of the DEM based constituent model formulation from the GGFS development team and is developing the capability to replicate the existing process. This is the first important step towards the ability of the NASA team to independently perform such model development in a production setting. Further efforts are underway to migrate the DEM based model simulation process performed with the academic based tools to more capable Open Source, highly parallelized simulation tools for efficient operation on NASA HPC assets. Evaluation of the currently implemented (such as mono-disperse and bi-disperse spherical and irregular shape particle constituent model applications) and continuously evolving full-range particle physics models in the GGFS tool is performed by the NASA team to advance application readiness of the simulations. Application testing for complex PSI erosions and cratering scenarios such as the Apollo LM is performed for axi-symmetric and full 3D simulations to aid the tool developers in achieving practical application readiness for NASA projects. Important validation and application testing will further be performed against experimental data generated under the GCD PSI project experimental component.

Peter A Liever↗

NASA NTRSDate not supplied

Advances in Plume-Surface Interaction Simulation Capability Under Lunar Landing Conditions

Plume-Surface Interaction (PSI) between lander engine plumes and native regolith soil presents primary hazards in obscuration and contamination by particle clouds, high-energy ejecta streams, and landing area cratering damage. The MSFC Fluid Dynamics Branch has assembled a portfolio of simulation tools to develop a predictive PSI capability for NASA customers such as the Human Lander System (HLS) and Commercial Lunar Payload Services (CLPS). These tools are matured via funding by NASA’s STMD Game Changing Development Program and the NASA SBIR/STTR Program.

Peter A Liever↗

NASA NTRSDate not supplied

Particle Interaction Physics Model Formulation for Plume-Surface Interaction Erosion and Cratering

The Predictive Simulation Capability development team of the STMD Game Changing Development sponsored PSI project is implementing computational simulation capability for the efficient and accurate prediction of Plume-Surface Interaction induced surface erosion and cratering in Martian and Lunar environments. The status of the Focus Area 3 of the PSI project in the generation and efficient application of accurate soil particle composition modeling in the Gas-Granular Flow Solver (GGFS) computational framework is presented. The process of constitutive closure model database generation using DEM particle interaction modeling for capturing the effects of irregular particle shape and poly-disperse mixture distribution effects is outlined. This capability has now been ported to NASA supercomputer assets and NASA engineers successfully demonstrated technology and skillset transfer in model generation for spherical and irregularly shaped, mono-disperse and bi-disperse mixture compositions. Assessment of the computational efficiency and practicality of the academic serially executed DEM tools on NASA supercomputers identified the need to migrate to a DEM framework capable of performing parallel simulations in a simultaneous process orchestrated in an automated setup, execution, database extraction, and dataset delivery ready for application simulations. The LIGGGHTS DEM toolset has been selected as the most suitable tool to migrate the DEM simulations. Once the soil model generation process is implemented, models capturing the shape and poly-dispersity effects will be generated to perform much refined validation simulations against the experiments performed under the PSI project. The application readiness of the soil models currently operational in GGFS was presented for the example of a full scale, 3-D simulation of the plume induced erosion and crater formation of the Apollo LM at an elevation of 5m above ground in a low pressure, near vacuum background.

Peter A Liever↗

NASA NTRSDate not supplied

Particle Interaction Physics Model Formulation for Plume-Surface Interaction Erosion and Cratering

The Predictive Simulation Capability development team of the STMD Game Changing Development sponsored PSI project is implementing computational simulation capability for the efficient and accurate prediction of Plume-Surface Interaction induced surface erosion and cratering in Martian and Lunar environments. The status of the Focus Area 3 of the PSI project in the generation and efficient application of accurate soil particle composition modeling in the Gas-Granular Flow Solver (GGFS) computational framework is presented. The process of constitutive closure model database generation using DEM particle interaction modeling for capturing the effects of irregular particle shape and poly-disperse mixture distribution effects is outlined. This capability has now been ported to NASA supercomputer assets and NASA engineers successfully demonstrated technology and skillset transfer in model generation for spherical and irregularly shaped, mono-disperse and bi-disperse mixture compositions. Assessment of the computational efficiency and practicality of the academic serially executed DEM tools on NASA supercomputers identified the need to migrate to a DEM framework capable of performing parallel simulations in a simultaneous process orchestrated in an automated setup, execution, database extraction, and dataset delivery ready for application simulations. The LIGGGHTS DEM toolset has been selected as the most suitable tool to migrate the DEM simulations. Once the soil model generation process is implemented, models capturing the shape and poly-dispersity effects will be generated to perform much refined validation simulations against the experiments performed under the PSI project. The application readiness of the soil models currently operational in GGFS was presented for the example of a full scale, 3-D simulation of the plume induced erosion and crater formation of the Apollo LM at an elevation of 5m above ground in a low pressure, near vacuum background.

Peter A Liever↗

NASA NTRSDate not supplied

Gas-Particle Interaction Model Development in Plume Surface Interaction Erosion and Cratering

The development of a predictive simulation capability for extra-terrestrial Plume Surface Interaction (PSI) environments is undertaken by the Fluid Dynamics Branch at NASA/MSFC under the Game Changing Development (GCD) Program funded by NASA’s Space Technology Mission Directorate (STMD). Predictive simulation capability for propulsive Martian and Lunar landing PSI requires accurate modeling of the complex high-speed plume impingement and resulting gas/particle-cloud and ejecta stream formation. Physics modeling gap analysis during formulation of the PSI project scope identified two particular phenomena of first order importance in gas-particle interactions that lacked existing modeling formulations. The first arises from the lack of models capturing the unsteady drag forces imparted on particles by the rapidly expanding supersonic compressible flow. The second addresses the fluctuating forces and dispersions imparted on both the particle and the fluid resulting from the interference and wake turbulence generated by close proximity particle clouds, dubbed the Particle Turbulent Kinetic Energy(PTKE). Their first order significance has been identified in experiments, but simulation models currently do not exist for either effect. The development of models and the eventual implementation into the Eulerian Gas-Granular Flow Solver (GGFS) simulation tools was constructed as one of four major tasks of the PSI project. In this process, data on particle kinetics and gas-particle interactions are collected from carefully designed experiments of particles embedded in jets. The effects observed in the experiments are then replicated in high-fidelity particle-resolved CFD simulations to inform the formulation of improvements to particle phase drag models for implementations in the more efficient Eulerian-Lagrangian CFD simulations. The resulting models are ultimately ported to the Eulerian-Eulerian models applied for most efficient simulations in PSI production application tools. This paper describes the activities and accomplishments of the past year in the gas-particle interaction modeling task of the PSI project.

Jeff West↗

NASA NTRSDate not supplied

Overview of Plume-Surface Interaction Data from Subscale Inert Gas Testing at NASA MSFC Test Stand 300 Vacuum Facilities

Maturation and validation of predictive modeling capabilities for plume-surface interactions and their effects requires relevant, highly characterized ground test data. The National Aeronautics and Space Administration has developed a test bed for these behaviors under its Game Changing Developments Plume Surface Interactions project, and has undertaken testing at the Marshall Space Flight Center to address critical data needs. This manuscript provides a high-level overview of the testing and its associated data.

Chad J Eberhart↗

NASA NTRS2021

A lingering local exopshere created by a gas plume of a lunar lander

We model the expected local exosphere created by outgassing from a lunar lander plume water deposit located adjacent to a lunar lander. We assume the landing is near dawn within Lacus Mortis at 45oN. We consider a set of water desorption scenarios especially focusing on the water-surface desorption activation energy that can possess a distribution of energy states. Our initial simulation starts with a deposition surface having 1020 water molecules per square meter in a 2 km × 2 km region where 90% of the water is retained by weak water-water sorption interactions and 10% are bound by water-regolith sorption interactions. We find that the loosely bound water molecules in water-water interactions quickly desorb within hours after landing. However, water molecules bound to surface sites having a desorption activation greater than 0.7 eV were found to be retained until the source region rotated to later local times (i.e., surface temperature becomes relatively high). We found such time-delayed desorption leads to a tenuous but lingering exosphere emitted from the lander plume deposit region for many 10's of hours after landing. We also adjusted the initial condition by considering different landing local times and considered a case where 100% of the water is bound by water-regolith interactions (mimicking a porous regolith).

W.M. Farrell↗

NASA NTRS2021

Airborne Dust Plumes Lofted by Dislodged Ice Blocks at Russell Crater, Mars

Linear dune gullies on poleward-facing Martian slopes are enigmatic. Formation by CO2-ice block or snow cornice falls has been proposed based on optical imagery of bright, high-albedo features inside gully channels. Because these features often resemble patchy frost residue rather than three-dimensional blocks, more evidence is needed to support the ice-block formation mechanism. Satellite imagery captured two simultaneous airborne plumes with in-channel sources at the Russell crater megadune, thrust up, and dispersed outward along the path of linear dune gullies. We use spectral data analyses, climatic analyses of bolometric temperatures, and thermal modeling to further develop the mechanistic framework for linear dune gully development. Basal sublimation and CO2 gas venting likely cause CO2-ice-block detachment and falls from gully alcoves in southern early spring, accompanied by ice-block off-gassing and saltation of sands and coarse silts that are redeposited around gully channels, and lofting of sublimation lag (coarse dust/silt) into airborne plumes.

Cynthia Dinwiddie↗

NASA NTRS2022

SO2 Plumes Observation with LMOL: Theory, Modeling, and Validation

LMOL, the NASA Langley Mobile Ozone Lidar, is locatednear NASA’s LaRC steam plant when not deployed in campaigns. Theplant produces steam through the incineration of local trash, and itsexhaust plume occasionally contains SO2.SO2is a known, regulated, pollutant that affects O3observations in theUV, as is the case with LMOL. In this work, we show how we modifiedLMOL to detect the plant SO2plumes and compute its density when theO3background is stable; we observed densities compatible with what isexpected from the typical plume exhaust. The selection of laser lines sothat an O3variation would not get confused with a SO2detection isexplained in details, and a model capable of simulating the Lidar signalwith (notably) O3and SO2absorption for the validation of the retrievalresolution and uncertainty is presented. Finally, the comparison betweenthe modeled and observed performances of the system is shown: themaximum altitude, resolution, and error in the modeled signal and theobserved signals are the same within reasonable margins.This work demonstrates that LMOL is fully capable of working withSO2. The next step being the addition of an additional laser channel,which is simplified by the tunable aspect of the LMOL laser, to addressO3and SO2simultaneously, allowing the assessment of SO2when O3has variations.

Guillaume Gronoff↗

NASA NTRSDate not supplied

A Hybrid CFD/Engineering Model for Predicting Plume Induced Erosion and Cratering

The Descent Interpolated Gas-Granular Erosion Model (DIGGEM) is a hybrid computational fluid dynamics (CFD) / engineering model calibrated with flight data from Apollo. It is used for the prediction of plume induced viscous erosion and cratering during the descent of landing vehicles. The model assumes a functional relationship between local shear stress and eroded mass flux. It is used along with a suite of other tools to predict complex plume induced environments for Human Landing System (HLS) and Commercial Lunar Payload Services (CLPSS) vehicles.

PSI↗

NASA NTRS2016

Probing for Evidence of Plumes on Europa With HST/STIS

Roth et al. (2014a) reported evidence for plumes of water venting from a southern high latitude region on Europa: spectroscopic detection of off-limb line emission from the dissociation products of water. Here, we present Hubble Space Telescope direct images of Europa in the far-ultraviolet (FUV) as it transited the smooth face of Jupiter to measure absorption from gas or aerosols beyond the Europa limb. Out of 10 observations, we found 3 in which plume activity could be implicated. Two observations showed statistically significant features at latitudes similar to Roth et al., and the third at a more equatorial location. We consider potential systematic effects that might influence the statistical analysis and create artifacts, and are unable to find any that can definitively explain the features, although there are reasons to be cautious. If the apparent absorption features are real, the magnitude of implied outgassing is similar to that of the Roth et al. feature; however, the apparent activity appears more frequently in our data.

Planets and satellites↗

NASA NTRS2021

The Dispersion of the Modified Two-Stream and Lower Hybrid Drift Instabilities in the Near-pole Plume of a Magnetically Shielded Hall Thruster

Recent analytical and numerical investigations have shown that instabilities in the lower hybrid frequency range can grow in the plume region downstream of the front magnet pole pieces of a magnetically shielded Hall thruster. Growth of the Modified Two-Stream (MTSI) and Lower Hybrid Drift (LHDI) instabilities was found with wave propagation in the r-z (or in-) plane and azimuthal (or out-of-plane) directions, respectively. In the analysis of the LHDI electron collisions were found to be insufficient to quench the instability in a region contained by the thruster ion beam and hollow cathode plume. The implication of the findings is that ions may be heated anomalously by these instabilities, in both the out-of-plane and in-plane directions, thereby altering the velocity field and enhancing the energy of those ions that strike nearby thruster surfaces. In this article we summarize the solution of the dispersion relation for each of these instabilities and provide additional results that can be compared directly with data from future plasma diagnostics, including with direct measurements of the wave dispersion.

Ortega, A. Lopez↗

NASA NTRS2023

Distributed Spacecraft Mission (DSM) Plume Design Reference Mission (DRM) Inter-Satellite Link Modeling, Analysis and Simulation

NASA Goddard Space Flight Center (GSFC) Radical Innovation Initiative (RI2) plans to focus intently on DSM capability advancements in FY22-24. A DSM mission involves multiple spacecraft, arranged in a constellation, to achieve one or more common goals via the use of inter-satellite links (ISL) between the satellites. Recently, the GSFC Internal Research & Development (IRAD) program established Enceladus as a design reference mission (DRM) for the current DSM effort to foster the conceptual development of communication architecture, requirements, and solutions for future DSM ISL, as well as being able to push other research areas of interest. Enceladus is an icy moon of the planet Saturn. The DRM Enceladus mission concept involves a constellation of 24 small satellites, orbiting Enceladus around 100 km altitude in 3 planes, as observing nodes for science measurement. The mission science data will be sent back to Earth through a relay orbiting Saturn, using the constellation’s inter-satellite links. A QualNet/STK simulation model of the Relay and constellation ISL optical and RF links is developed for the design and optimization of the link and orbital parameters, as well as the inter-networking protocols. Delay Tolerant Networking (DTN) is utilized in the application layer modeling. This paper describes the plume DRM mission concept of an Enceladus constellation to relay science data to Earth and includes the proposed communication architecture and operation concepts. We present details of the QualNet/STK engineering model for this communication scenario to simulate the end-to-end data traffic through multiple layers (physical, data link, networking, transport and application). A link analysis for the constellation’s ISL, constellation to Relay and Direct to Earth (DTE) optical link is provided and discussed. The results of end-to-end traffic simulation for the data throughout/latency evaluation and assessment of the communication architecture are presented. The investigation of the concept of optical multiple access (OMA) for the Plume DRM is discussed. The modeling and simulation methodology developed in this paper is applicable to other DSMs in near Earth and deep space such as Earth-Moon L1/L2 and Lunar regions.

Distributed Spacecraft Mission (DSM) Inter-satelli↗

NASA NTRSDate not supplied

Evaluating Machine Learning Approaches to Plume Tracking

On July 15, 2022, the Hunga Tonga-Hunga Ha’apai (HTHH) submarine volcano erupted, propelling trace gasses and ash through the troposphere and up into the stratosphere. Previous studies manually tracked the aerosol and trace gas plumes over time across different positions in the southern hemisphere. Using imagery from NASA’s Earth Observing System, including MODIS aerosol products and OMI sulfur dioxide products, this research demonstrates how open-source machine learning (ML) models, like Meta’s Segment Anything Model (SAM), can perform automatic plume tracking following the Hunga Tonga eruption. This extensible methodology, and modular data processing and modeling pipeline, establishes a framework for systematically and rapidly studying natural disasters, including additional volcanic eruptions and large-scale wildfires. By combining advanced machine learning techniques, such as SAM’s zero-shot learning, with large volumes of NASA’s Earth Observation and remote sensing data, this work shows how AI and open science can accelerate research and generate actionable results, even for unprecedented events. The tools and technologies presented here can help translate earth science to action from NASA’s current and future Earth observing satellite missions, and assist researchers and stakeholders in understanding, mapping, and responding to natural disasters in a changing world.

machine learning↗

NASA NTRSDate not supplied

Preparations for Laser Rayleigh Scattering Flow Visualization of Inert Ethane Plumes in PSI Environments at the NASA Langley 60-ft Vacuum Sphere

Understanding of the interaction between the plume and the regolith during powered descent are critical for reliable landings and to avoid damaging the vehicle or nearby infrastructure. To further study this complex flowfield, preparations are underway to describe the interrogation of an impinging ethane plume in lunar-relevant conditions within the 60-ft vacuum sphere at LaRC using Rayleigh diagnostics.

Flow Visualization↗

NASA NTRSDate not supplied

Tracking the Hunga Tonga-Hunga Ha’apai Eruption Stratospheric Aerosol and Trace Gas Plumes Using Machine Learning

On January 15, 2022, the Hunga Tonga-Hunga Ha’apai (hereafter, Hunga Tonga) submarine volcano had an explosive eruption that thrusted ash, gases, and water vapor through the troposphere into the stratosphere and mesosphere. Previous studies manually tracked the aerosol and trace gas plumes over time across different positions in the southern hemisphere. Using data retrieved from low earth orbiting satellite instruments (e.g., OMPS, OMI, and CALIPSO), this research demonstrates how open-source machine learning (ML) models, like Meta’s Segment Anything Model (SAM), with prompt engineering can perform automatic plume tracking following the Hunga Tonga eruption. This extensible methodology, and modular data processing and modeling pipeline using NASA Earthdata and Openscapes, establishes a framework for systematically and rapidly studying extreme events, including volcanic eruptions and large-scale wildfires. By combining advanced machine learning techniques, such as SAM’s zero-shot learning, with large volumes of remote sensing data, this work demonstrates how AI and open science can accelerate research and generate actionable results. The tools and technologies presented here can help translate earth science to action from NASA’s current and future Earth observing satellite missions (e.g., the Atmosphere Observing System (AOS)), and assist researchers and stakeholders in understanding, mapping, and responding to natural disasters and extreme events in a changing world.

David M. Giles↗

NASA NTRSDate not supplied

Wall-Jet Evolution During Plume-Surface Interaction Using PLIF Imaging

Planar laser-induced fluorescence (PLIF) flow visualization was used to examine the spatial evolution for the wall-jet formed by an impinging supersonic jet in a large-scale vacuum environment. This canonical configuration is representative of the plume-surface interaction induced by a rocket exhaust plume impinging on the planetary surface at lunar-relevant and Martian-relevant environments. PLIF flow visualization of the very low-density environment (as low as ~0.006% of standard atmospheric density) was performed using seeded nitric oxide in a nitrogen flow at three test conditions. Two conditions are representative of the lunar environment, and one is representative of the Martian environment. The combined images from two simultaneous PLIF views were used to construct a 2D slice of the flowfield spanning approximately 150 mm in height (determined by the laser sheet) and 500 mm in width (determined by the camera views). The three test conditions showed different behavior for the wall-jet, largely due to the different levels of lifting above the surface and the appearance of a physical process similar to a Kelvin–Helmholtz instability for the Martian-relevant case, which appeared to create a dramatic expansion of the wall-jet height with increased radial distance.

PSI↗