Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “P Reactor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

An evaluation of in-line component process modules

The purpose of this paper is to discuss the analysis of abnormal configurations of in-line components, tanks and pumps in support of the integration of Criticality Safety into the Uranium Processing Facility (UPF) at Y-12 National Security Complex (Y-12). In-line components are components that are used in solution piping systems, including instrumentation, valves, pumps, and other general-use equipment. Mounted on self-contained skids/modules, in-line components (instruments, seal pots, level switches, etc.), tanks, and pumps are associated with a wide variety of the UPF processes. Using computer generated models expected to bound abnormal conditions for process module configurations, this report evaluates the impact of loss of spacing between in-line components in in-line component arrays and the effects of abnormal events. All fissile materials are considered to have a {sup 235}U enrichment of 100% and full theoretical density of 18.81 g/cm{sup 3} to conservatively represent the maximum credible enrichment available. Water and concrete were utilized to account for the construction materials associated with the skids and other reflective surfaces. Uranyl nitrate, was evaluated over the range of 0 to 550 g U/L for various normal and abnormal configurations of components mounted on skids. Abnormal events included fissile spills, sprinkler activation, and loss of spacing due to a seismic event. The results from this analysis provide a basis that supports development of nuclear safety design criteria, which generates standardized volume limits expected to bound the actual internal volume of the planned components. The results also provide a basis for consistent Nuclear Criticality Safety (NCS) control of in-line components, pumps, and tanks, for the ultimate development of Criticality Safety Process Studies in the UPF. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Spurious actuations in digital instrumentation and control systems - evaluation framework - 137

When a digital Instrumentation and Control (I and C) system or its associated components produce an unintended operation, it is known as a spurious actuation. Spurious actuations could lead to unnecessary challenges to safety equipment, challenge the ability of safety systems to provide their intended functions, or place the plant in an un-analyzed state. There is arguably a lack of clear and sufficient regulatory guidance for assessing spurious actuations. In an attempt to address this guidance gap, this paper provides a generic framework for evaluating spurious actuations in digital I and C systems, components, or supporting systems that are important to safety. The framework provides a methodology for: (1) defining the scope of the evaluation including supporting assumptions; (2) providing options for excluding a spurious actuation from the evaluation; (3) assessing the potential consequences from the assessed spurious actuations; and, (4) defining a high-level acceptance criteria. The methodology discussed by this paper is not to be construed as a requirement, regulation, or acceptable guidance by either domestic or international regulators; instead, it is intended to serve as a potential foundation or technical basis to be used for developing clear and sufficient regulatory guidance for assessing spurious actuations in digital I and C systems. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Updated Application of Spatial Data Modeling and Geographical Information Systems (GIS) for Identification of Potential Siting Options for Small Modular Reactors

Beginning in late 2008, Oak Ridge National Laboratory (ORNL) responded to ongoing internal and external studies addressing key questions related to our national electrical energy supply. This effort has led to the development and refinement of Oak Ridge Siting Analysis for power Generation Expansion (OR-SAGE), a tool to support power plant siting evaluations. The objective in developing OR-SAGE was to use industry-accepted approaches and/or develop appropriate criteria for screening sites and employ an array of geographic information systems (GIS) data sources at ORNL to identify candidate areas for a power generation technology application. The basic premise requires the development of exclusionary, avoidance, and suitability criteria for evaluating sites for a given siting application such as siting small modular reactors (SMRs). For specific applications of the tool, it is necessary to develop site selection and evaluation criteria (SSEC) that encompass a number of key benchmarks that essentially form the site environmental characterization for that application. These SSEC might include population density, seismic activity, proximity to water sources, proximity to hazardous facilities, avoidance of protected lands and floodplains, susceptibility to landslide hazards, and others.

GIS↗

Modeling of the SPERT Transients Using SERPENT2 with Time Dependent Capabilities

Over the last decade, multiphysics coupled calculations have become one of the most important research topics in the area of development and enhancement of reactor analysis and simulation tools. One of the main applications of these coupled simulations is transient analysis, which may involve modeling of experiments, normal plant operation or accident scenarios. Traditionally, the reactor physics side of coupled simulations has been represented by deterministic or hybrid Monte Carlo - deterministic methods. Monte Carlo techniques are limited by their high computational cost. However increased computing power makes their application to multiphysics modeling of transients feasible. Active research is underway to develop algorithms for time dependent calculations, implement them in Monte Carlo codes, and evaluate their performance. In this paper time dependent simulations of the SPERT experiments using the Serpent2 code are presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Out-of-Pile Testing and Instrumentation Transient Water Irradiation System

Current initiatives to increase the burnup of conventional nuclear fuels past the approximate 62 GWd/t limit have been spurred on by direct savings to refueling and waste storage. The technical justification for a new license limit requires extensive qualification through experimental testing. Unlike beginning-of-life fuels, high-burnup fuels are more susceptible to fuel fragmentation, relocation, and dispersal (FFRD), therefore more data is needed to characterize fuels under key accident scenarios. The Transient Reactor Test Facility (TREAT) located at the Idaho National Laboratory has developed a testing apparatus architecture to test fuels and claddings at prototypic conditions. The Transient Water Irradiation System (TWIST) is the latest iteration of a testing device capable of conducting loss of coolant accidents (LOCAs) in TREAT. The Out-of-Pile Testing and Instrumentation TWIST (OPTI-TWIST) is an electrically heated device that is analogous to TWIST. OPTI-TWIST allows for detailed instrumentation and thermal-hydraulic characterization. TWIST ultimately aims to conduct the most advanced in-situ diagnostics to evaluate FFRD in a prototypic LOCA. Moreover, it will explore the phenomenological bifurcation of a decay-energy heat up driven LOCA and a stored-energy heat up driven LOCA. The instrumentation suite includes conventional thermocouples and pressure transducers in addition to an electro impedance sensor, an acoustic emission sensor, an optical pressure sensor, and an optical pyrometer. Characterizing these instruments in OPTI-TWIST eliminates complications of irradiation effects while preserving extreme thermal-hydraulic conditions. Finally, benchmarking both devices to a thermal-hydraulic code like the Reactor Excursion and Leak Analysis Program (RELAP)5-3D provides a unique opportunity for iteration. Pre-test predictions and post-test interpretations inform the physical designs, operational procedures, test conditions, and instrumentation types and positions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Crystal-Diffraction System Prototype for Measuring Neutron’s Charge: Thermal Protection Test and Vibration Measurements

A prototype system design for ultra-high-precision neutron spectrometry using diffraction in perfect crystals is described. Results of experimental verification of the temperature stability inside the setup are presented. Results of vibration spectrum measurements in working zone of the PF1b beam of ILL reactor (Grenoble, France), where the prototype setup will be arranged for experimental testing, are considered.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nonstatistical fluctuations in the 35 Cl(n,p) 35 S reaction cross section at fast-neutron energies from 0.6 to 6 MeV

The lack of experimental data on the 35 Cl(n,p) 35 S reaction above 100 keV has led to nuclear data evaluations that are relatively unconstrained at fast neutron energies. As a result, efforts to explore, develop, and potentially certify next generation reactor designs that incorporate chloride salts as a coolant material have been hindered. Here, we report partial cross section data for the 35 Cl(n,p) 35 S and 35 Cl(n,α) 32 P reactions at incident neutron energies between 0.6 MeV and 6 MeV. The measurement was performed using the pulsed beam of neutrons at the unmoderated WNR spallation neutron source at the Los Alamos Neutron Science Center, with the outgoing charged particles detected by the LENZ experimental setup, consisting of annular silicon detectors. Nonstatistical fluctuations in the 35 Cl(n,p 0 ) cross section were observed up to around 3 MeV, and the magnitude of the cross section was systematically lower than all available data evaluations at energies above 1 MeV. Modifications to the ENDF/B-VIII.0 data evaluation are suggested to better reproduce the energy averaged experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hysteresis in Coolant Radiolysis in a Pressurized-Water Reactor and its Effect on the Critical Hydrogen Concentration

Mathematical modeling is used to investigate the effect of the thermophysical non-uniformity of the core in a reactor on the behavior of radiation-chemical processes in the first-loop water coolant of pressurizedwater power reactors. The problem of determining the critical hydrogen concentration in coolant that is sufficient to maintain the concentration of oxidizers in the coolant at a corrosion safe level is used as an example. It is shown that in a reactor the critical hydrogen concentration may not have a definite value but rather a range of values dependent on the radiation-chemical process and the reactor’s thermo- and neutron-physical parameters. Calculations also showed that the conditions under which oxidizer formation is suppressed can be determined accurately only with detailed three-dimensional modeling of thermophysical phenomena and radiation-chemical transformations in the entire core volume.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Sewage sludge ash to phosphorus fertiliser: Variables influencing heavy metal removal during thermochemical treatment

The aim of this study was to improve the removal of heavy metals from sewage sludge ash by a thermochemical process. The resulting detoxified ash was intended for use as a raw material rich in phosphorus (P) for inorganic fertiliser production. The thermochemical treatment was performed in a rotary kiln where the evaporation of relevant heavy metals was enhanced by additives. The four variables investigated for process optimisation were treatment temperature, type of additive (KCl, MgCl{sub 2}) and its amount, as well as type of reactor (directly or indirectly heated rotary kiln). The removal rates of Cd, Cr, Cu, Ni, Pb, Zn and of Ca, P and Cl were investigated. The best overall removal efficiency for Cd, Cu, Pb and Zn could be found for the indirectly heated system. The type of additive was critical, since MgCl{sub 2} favours Zn- over Cu-removal, while KCl acts conversely. The use of MgCl{sub 2} caused less particle abrasion from the pellets in the kiln than KCl. In the case of the additive KCl, liquid KCl - temporarily formed in the pellets - acted as a barrier to heavy metal evaporation as long as treatment temperatures were not sufficiently high to enhance its reaction or evaporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled Monte Carlo and thermal-fluid modeling of high temperature gas reactors using Cardinal

Cardinal is an open-source application that couples OpenMC Monte Carlo transport and NekRS computa-tional fluid dynamics to the Multiphysics Object-Oriented Simulation Environment (MOOSE), closing neutronics and thermal-fluid gaps in conducting high-resolution multiscale and multiphysics analyses of nuclear systems. Here, we provide an introduction to Cardinal's software design, data mapping, and multi -physics coupling strategy to highlight our approach to overcoming common challenges in multiphysics simulation. We then describe an application of Cardinal to prismatic High Temperature Gas Reactors (HTGRs) with various combinations of NekRS, OpenMC, BISON, and THM. A high-resolution coupling of NekRS, OpenMC, and BISON provides a reference solution at the unit cell level and shows excellent agree-ment with a lower-resolution coupling of THM, OpenMC, and BISON. A full core coupling of THM, OpenMC, and BISON resolving the three-dimensional conjugate heat transfer and sub-pin power distri-bution then provides detailed predictions of HTGR temperatures and the fission distribution.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Benchmark experiments at ASTRA facility on definition of space distribution of {sup 235}U fission reaction rate

Results of critical experiments performed at five ASTRA facility configurations modeling the high-temperature helium-cooled graphite-moderated reactors are presented. Results of experiments on definition of space distribution of {sup 235}U fission reaction rate performed at four from these five configurations are presented more detail. Analysis of available information showed that all experiments on criticality at these five configurations are acceptable for use them as critical benchmark experiments. All experiments on definition of space distribution of {sup 235}U fission reaction rate are acceptable for use them as physical benchmark experiments. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DIissolution of low enriched uranium from the experimental breeder reactor-II fuel stored at the Idaho National Laboratory

The Idaho National Laboratory (INL) is actively engaged in the development of electrochemical processing technology for the treatment of fast reactor fuels using irradiated fuel from the Experimental Breeder Reactor-II (EBR-II) as the primary test material. The research and development (R&D) activities generate a low enriched uranium (LEU) metal product from the electrorefining of the EBR-II fuel and the subsequent consolidation and removal of chloride salts by the cathode processor. The LEU metal ingots from past R&D activities are currently stored at INL awaiting disposition. One potential disposition pathway is the shipment of the ingots to the Savannah River Site (SRS) for dissolution in H-Canyon. Carbon steel cans containing the LEU metal would be loaded into reusable charging bundles in the H-Canyon Crane Maintenance Area and charged to the 6.4D or 6.1D dissolver. The LEU dissolution would be accomplished as the final charge in a dissolver batch (following the dissolution of multiple charges of spent nuclear fuel (SNF)). The solution would then be purified and the 235 U enrichment downblended to allow use of the U in commercial reactor fuel. To support this potential disposition path, the Savannah River National Laboratory (SRNL) developed a dissolution flowsheet for the LEU using samples of the material received from INL.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Inspection of a LOCA test rod at the Halden reactor project using gamma emission tomography

The LOCA test series IFA-650 conducted at the OECD Halden Reactor Project (HRP) has provided unique data on the performance of fuel rods during LOCA transients. One focus of the current investigations is the performance of the fuel in the ballooning stage of the LOCA transient. In this stage, relocation of fuel material is a possibility, in which case pellet fragments fall down to fill the void introduced by the increased volume of the ballooned cladding. This increases the heat load in that region, further promoting corrosion of the cladding. A special concern in the case of high-burnup fuels is the increasing number of small fuel fragments, which may be expected to cause a higher packing fraction in the ballooned region. In this work, a novel technique is presented for assessing the average density of the fuel material in the ballooned region of LOCA test rods. The investigation is based on non-destructive gamma emission tomography measurements, using the dedicated instrument recently developed at the HRP in collaboration with Westinghouse (Sweden) and Uppsala University. In this approach, the gamma radiation field surrounding the test rod has been measured with a narrowly collimated HPGe detector. Tomographic reconstruction of the data was performed, providing the radial gamma-ray source distribution within the measured volume, which reveals the fuel fragment distribution. From this, the density of the fuel in the measured volume (i.e., the packing fraction) may be calculated. The technique has been used to investigate a LOCA test rod of the Halden Reactor Project LOCA series. The LOCA experiment was carried out about one month prior to the gamma tomography examination. The results show that the distribution of the relocated fuel can be imaged using gamma rays from fission products. The reconstructions of the 662 keV rays from {sup 137}Cs and 1596 keV from {sup 140}Ba/La are demonstrated. In addition, the peaks of activation products offer valuable information on the location of the test rig structures, which may be utilized in a quantitative tomographic reconstruction to assess the spatially resolved packing fraction. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Dynamics of Power Pulses in a Research Reactor with Neptunium Nuclear Fuel

The current trend in neutron-aided scientific research presupposes the development of new high-intensity pulsed sources. One variant of such an installation could be a pulsed reactor with a fissile-isotope core – {sup 237}Np. The present work is devoted to a study of the dynamics of power pulses of a neptunium reactor taking account of fast temperature feedback during pulse buildup. The problem is reduced to a simple model of a single frequency oscillator combined with the equation of single point kinetics of a reactor neglecting delayed neutrons. It is shown that on the basis of such an approximation, owing to feedback on the temperature of a fuel element the estimated energy of accidental power pulses decreases by almost a factor of 10 compared with a calculation neglecting fast feedback.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗