Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear Fuel Performance Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Parametric analyses of single-zone thorium-fueled molten salt reactor fuel cycle options

Analyses of fuel cycle options based on thorium-fueled Molten Salt Reactors (MSRs) have been performed in support of fuel cycle screening and evaluation activities for the United States Department of Energy. The MSR options considered are based on thermal spectrum MSRs with 3 different separations levels: full recycling, limited recycling, and 'once-through' operation without active separations. A single-fluid, single-zone 2250 MWth (1000 MWe) MSR concept consisting of a fuel-bearing molten salt with graphite moderator and reflectors was used as the basis for this study. Radiation transport and isotopic depletion calculations were performed using SCALE 6.1 with ENDF/B-VII nuclear data. New methodology developed at Oak Ridge National Laboratory (ORNL) enables MSR analysis using SCALE, modeling material feed and removal by taking user-specified parameters and performing multiple SCALE/TRITON simulations to determine the resulting equilibrium operating conditions. Parametric analyses examined the sensitivity of the performance of a thorium MSR to variations in the separations efficiency for protactinium and fission products. Results indicate that self-sustained operation is possible with full or limited recycling but once-through operation would require an external neutron source. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

VERA-CS Validation Plan

The VERA core simulator, VERA-CS, provides the capability for steady-state reactor core simulation for operating nuclear power plant (PWR) conditions across multiple fuel cycles. This capability parallels that of industry core simulators which are typically licensed by the NRC for core design, core surveillance/monitoring activities, and safety-related calculations that support accident analyses. The licensing basis for these codes for these applications is a rigorous process of validating the software against measured data and quantifying the resulting biases and uncertainties. This document provides an initial plan for performing similar activities with VERA-CS, in a manner consistent with benchmarking activities performed in the nuclear industry.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Adsorbents and adsorption models for capture of Kr and Xe gas mixtures in fixed-bed columns

Off-gases produced during the reprocessing of used nuclear fuel (UNF) include 129-I 2 , 3-HHO, 14-CO 2 , 85-Kr, and 135-Xe, which are volatilized out into the off-gas. In order to meet regulatory requirements for reprocessing plant emissions, these gases must be captured and removed from the o?-gas stream prior to o?-gas emission. Of particular interest are the noble gases, Kr and Xe, which can be fairly difficult to remove from the off-gas due to their low chemical reactivity. Thus, this work is focused on utilizing engineered adsorbents, AgZ-PAN and HZ-PAN, to capture Kr and Xe from a mixed-gas stream at relatively low temperatures (191–295 K) and various flow rates (50–2000 mL/min). Isothermal data for Kr and Xe on each adsorbent are analyzed to produce the Langmuir parameters needed to model the mixture adsorption capacities at relevant temperatures using the Extended Langmuir model. Those parameters are then incorporated into a fixed-bed adsorption model developed in this work using the Mulitphysics Object-Oriented Simulation Environment (MOOSE). That model is used to simulate breakthrough times for Kr and Xe in packed columns of AgZ-PAN and HZ-PAN, ranging in length from 6 to 20 in., at relevant temperatures and flow rates. Breakthrough times varied from nearly instantaneous for Kr in AgZ-PAN to 30 h for Xe in HZ-PAN. After the developed model was validated by comparisons with experimental break-through data, the model framework was used to simulate the performance of multiple fixed-bed columns connected in series.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Understanding asymmetries using integrated simulations of capsule implosions in low gas-fill hohlraums at the National Ignition Facility

Current capsule implosions at the National Ignition Facility (NIF) using high-density-carbon ablators and laser energies close to 2 MJ have shown neutron yields in excess of 50 kJ. Improving on this performance requires understanding of the different degradation mechanisms. For many NIF implosions, nuclear diagnostic signatures have inferred residual hot-spot velocities that correlate with fuel areal density variations consistent with a low-order mode-1 asymmetry. A current working hypothesis attributes these asymmetries to a combination of beam to beam variations in the laser delivery and possibly coupling to target features, such as the diagnostic holes needed for x-ray imaging. Recently, a new source has been identified, thickness variation in the ablator shell. To gain better understanding and eventually mitigate the causes of <ρR> asymmetries, 3D integrated simulations using the actual delivered laser powers are needed. To capture the effect of the diagnostic holes (DHs) using direct numerical simulation would require significantly large computational resources. Instead, our 3D simulations make use of a subgrid model developed using highly-resolved 2D simulations that include several details of the DH engineering complexity. Simulations of NIF shots using hohlraums without DHs, to isolate the effect of beam-to-beam variations, reproduce fairly well the observed nuclear diagnostic signatures. Similarly, reasonable agreement between data and simulations is also obtained in the presence of diagnostic holes. To account for the remaining discrepancies a sensitivity study of ablator thickness variation showed that 1% thickness asymmetries are comparable in effect to 1% peak drive mode-1 asymmetries. Furthermore, this study identified sensitivity to variations in the imbedded doped layer (needed to shield the DT ice from the high energy x-rays generated in the hohlraum) thickness even when the inner and outer surface of the ablator are perfectly spherical.

radiation hydrodynamics↗

Advanced Variance Reduction for Global k-Eigenvalue Simulations in MCNP

The "criticality" or k-eigenvalue of a nuclear system determines whether the system is critical (k=1), or the extent to which it is subcritical (k<1) or supercritical (k>1). Calculations of k are frequently performed at nuclear facilities to determine the criticality of nuclear reactor cores, spent nuclear fuel storage casks, and other fissile systems. These calculations can be expensive, and current Monte Carlo methods have certain well-known deficiencies. In this project, we have developed and tested a new "functional Monte Carlo" (FMC) method that overcomes several of these deficiencies. The current state-of-the-art Monte Carlo k-eigenvalue method estimates the fission source for a sequence of fission generations (cycles), during each of which M particles per cycle are processed. After a series of "inactive" cycles during which the fission source "converges," a series of "active" cycles are performed. For each active cycle, the eigenvalue and eigenfunction are estimated; after N >> 1 active cycles are performed, the results are averaged to obtain estimates of the eigenvalue and eigenfunction and their standard deviations. This method has several disadvantages: (i) the estimate of k depends on the number M of particles per cycle, (iii) for optically thick systems, the eigenfunction estimate may not converge due to undersampling of the fission source, and (iii) since the fission source in any cycle depends on the estimated fission source from the previous cycle (the fission sources in different cycles are correlated), the estimated variance in k is smaller than the real variance. For an acceptably large number M of particles per cycle, the estimate of k is nearly independent of M; this essentially takes care of item (i). Item (ii) can be addressed by taking M sufficiently large, but for optically thick systems a sufficiently large M can easily be unrealistic. Item (iii) cannot be accounted for by taking M or N sufficiently large; it is an inherent deficiency due to the correlations between fission source estimates. In the new FMC method, the eigenvalue problem (expressed in terms of the Boltzmann equation) is integrated over the energy and direction variables. Then these equations are multiplied by J special "tent" functions in space and integrated over the spatial variable. This yields J equations that are exactly satisfied by the eigenvalue k and J space-angle-energy moments of the eigenfunction. Multiplying and dividing by suitable integrals of the eigenfunction, one obtains J algebraic equations for k and the space-angle-energy moments of the eigenfunction, which contain nonlinear functionals that depend weakly on the eigenfunction. In the FMC method, information from the standard Monte Carlo solution for each active cycle is used to estimate the functionals, and at the end of each cycle the J equations for k and the space-angle-energy moments of the eigenfunction are solved. Finally, these results are averaged over N active cycles to obtain estimated means and standard deviations for k and the space-angle-energy moments of the eigenfunction. Our limited testing shows that for large single fissile systems such as a commercial reactor core, (i) the FMC estimate of the eigenvalue is at least one order of magnitude more accurate than estimates obtained from the standard Monte Carlo approach, (ii) the FMC estimate of the eigenfunction converges and is several orders of magnitude more accurate than the standard estimate, and (iii) the FMC estimate of the standard deviation in k is at least one order of magnitude closer to the correct standard deviation than the standard estimate. These advances occur because: (i) the Monte Carlo estimates of the nonlinear functionals are much more accurate than the direct Monte Carlo estimates of the eigenfunction, (ii) the system of discrete equations that determines the FMC estimates of k is robust, and (iii) the functionals are only very weakly correlated between different fission generations. The FMC method was developed only late in the project and has to date received limited testing. Current work, which is taking place after the conclusion of this project, involves further development and testing for more complex and realistic problems. We expect that the FMC method will become a practical tool for Monte Carlo criticality simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhance BISON Metal Fuel Transient Models and Enable Assessment Based on Out-of-Pile Transient Experiments

In this report, the activities and achievements made by Argonne National Laboratory for the Nuclear Energy Advanced Modeling and Simulation (NEAMS) BISON code metallic fuel validation and verification (V&V) project in FY2023, with a focus on the capability development and assessment case development for the out-of-pile transient experiments, are summarized. The liquid cladding penetration model was improved based on a comprehensive set of fuel behavior test apparatus (FBTA) test results. The new model was implemented into BISON along with a simple model to account for fuel melting effects. The metallic fuel meshing capability was also upgraded to allow local refinement using unstructured triangular mesh. Based on the previous success in developing the BISON-FIPD integration powered BISON assessment case, this database enabled BISON evaluation and V&V capability was expanded to the out-of-pile transient experiments by introducing BISON-OPTD integration. A series of initial out-of-pile transient assessment cases were implemented into BISON to provide powerful platforms to evaluate current BISON’s capabilities in simulating metallic fuel performance during out-of-pile transients. The established capabilities will also benefit the calibration and V&V of future advanced mechanistic models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental and Analytic Study on the Core Bypass Flow in a Very High Temperature Reactor

Core bypass flow has been one of key issues in the very high temperature reactor (VHTR) design for securing core thermal margins and achieving target temperatures at the core exit. The bypass flow in a prismatic VHTR core occurs through the control element holes and the radial and axial gaps between the graphite blocks for manufacturing and refueling tolerances. These gaps vary with the core life cycles because of the irradiation swelling/shrinkage characteristic of the graphite blocks such as fuel and reflector blocks, which are main components of a core's structure. Thus, the core bypass flow occurs in a complicated multidimensional way. The accurate prediction of this bypass flow and counter-measures to minimize it are thus of major importance in assuring core thermal margins and securing higher core efficiency. Even with this importance, there has not been much effort in quantifying and accurately modeling the effect of the core bypass flow. The main objectives of this project were to generate experimental data for validating the software to be used to calculate the bypass flow in a prismatic VHTR core, validate thermofluid analysis tools and their model improvements, and identify and assess measures for reducing the bypass flow. To achieve these objectives, tasks were defined to (1) design and construct experiments to generate validation data for software analysis tools, (2) determine the experimental conditions and define the measurement requirements and techniques, (3) generate and analyze the experimental data, (4) validate and improve the thermofluid analysis tools, and (5) identify measures to control the bypass flow and assess its performance in the experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NEAMS VLTS project :

The objective of the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Very Long Term Storage (VLTS) Project is to develop a simple, benchmark model that describes the performance of Zry4 d-hydrides in cladding, under conditions of long-term storage of used fuel. This model will be used to further explore the requirements of hydride modeling for used fuel storage and transport. It is expected that this model will be further developed as its weaknesses are understood, and as a basis of comparison as the Used Fuel Disposition (UFD) Campaign explores more comprehensive, multiscale approaches. Cladding hydride processes, a thermal model, a hydride model API, and the initial implementation of the J2Fiber hydride model is documented in this report.

Hansen, Glen A.↗

Performance assessment modeling of a generic SNF/HLW repository in salt with coupled thermal-hydrologic effects - 15423

This paper describes advances in performance assessment modeling of deep geologic repositories facilitated by a massively parallel, high-performance computing (HPC) environment. Our new Generic Disposal System Analysis (GDSA) Framework utilizes the massively parallel PFLOTRAN multi-physics code to simulate repository performance in the presence of coupled thermal-hydrologic-chemical processes, linked to DAKOTA, an HPC uncertainty sampling and propagation code that provides nested parallelism for multi-realization performance assessment and sensitivity analysis. This enhanced performance assessment (PA) modeling capability is demonstrated with deterministic and probabilistic simulations of a generic repository for SNF and HLW in bedded salt host rock, by comparing repository performance between a case with heat-generating waste ('thermal' case) and a case without heat generation ('isothermal' case). The simulation results provide preliminary insights into the effect of multi-physics processes and thermal-hydrologic coupling on the long-term behavior of a reference-case salt repository. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermal and hydraulic performance of volumetrically heated triply periodic minimal surface heaters

Advanced heat transfer surfaces, mainly Triply Periodic Minimal Surfaces (TPMSs) have great potential to increase heat transfer performance over traditional heat transfer surfaces due to their tortuous flow path and higher surface area-volume ratio. The emergence of additive manufacturing of nuclear fuel motivates experimental investigation of such advanced geometries in the context of a nuclear reactor core. Here, this study employed a novel method to explore the performance of gyroid and diamond TPMS geometries. Volumetrically heated heaters were additively manufactured from conductive polymer filament, and airflow was used to simulate the convective heat transfer from the core within a nuclear reactor. The mass flow and volumetric generation rates were varied, local Nusselt number correlations were obtained using embedded thermocouples to measure the solid and fluid temperature, and friction factor correlations were developed using differential pressure measurements. The gyroid TPMS presented a friction factor 1.5 times higher than the diamond TPMS and 90 times that of the rod bundle. TPMS geometries showed Nusselt numbers 8–10 times higher than that of the rod bundle, also maintaining colder internal temperatures, which suggested that they could sustain 250–275 % higher power density than the rod bundle for a given centerline temperature. Hence, having the potential to greatly increase the safety margins and power output of a nuclear reactor core with similar volume.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BISON and MARMOT Development for Modeling Fast Reactor Fuel Performance

BISON and MARMOT are two codes under development at the Idaho National Laboratory for engineering scale and lower length scale fuel performance modeling. It is desired to add capabilities for fast reactor applications to these codes. The fast reactor fuel types under consideration are metal (U-Pu-Zr) and oxide (MOX). The cladding types of interest include 316SS, D9, and HT9. The purpose of this report is to outline the proposed plans for code development and provide an overview of the models added to the BISON and MARMOT codes for fast reactor fuel behavior. A brief overview of preliminary discussions on the formation of a bilateral agreement between the Idaho National Laboratory and the National Nuclear Laboratory in the United Kingdom is presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of Impact of Monoenergetic Photon Sources on Prioritized Nonproliferation Applications: Simulation Study Report

Near-monoenergetic photon sources (MPSs) have the potential to improve sensitivity at greatly reduced dose in existing applications and enable new capabilities in other applications. MPS advantages include the ability to select energy, energy spread, flux, and pulse structures to deliver only the photons needed for the application, while suppressing extraneous dose and background. Some MPSs also offer narrow divergence photon beams which can target dose and/or mitigate scattering contributions to image contrast degradation. Current broad-band, bremsstrahlung photon sources (e.g., linacs and betatrons) deliver unnecessary dose that in some cases also interferes with the signature to be detected and/or restricts operations, and must be collimated (reducing flux) to generate narrow divergence beams. While MPSs can in principle resolve these issues, they are technically challenging to produce. Candidate MPS technologies for nonproliferation applications are now being developed, each of which have different properties (e.g. broad divergence vs. narrow). Within each technology, source parameters trade off against one another (e.g. flux vs. energy spread), representing a large operation space. To guide development, requirements for each application of interest must be defined and simulations conducted to define MPS parameters that deliver benefit relative to current systems. The present project conducted a broad assessment of potential nonproliferation applications where MPSs may provide new capabilities or significant performance enhancement (reported separately), which led to prioritization of several applications for detailed analysis. The applications prioritized were: cargo screening and interdiction of Special Nuclear Materials (SNM), detection of hidden SNM, treaty/dismantlement verification, and spent fuel dry storage cask content verification. High resolution imaging for stockpile stewardship was considered as a sub-area of the treaty topic, as it is also of interest for future treaty use. This report presents higher-fidelity calculations and modeling results to quantitatively evaluate the prioritized applications, and to derive the key MPS properties that drive application benefit. Simulations focused on the conventional signatures of radiography, photofission, and NRF to enable comparison to present methods and evaluation of benefit.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Separate-Effects Validation Experiments for Models of Fracture in Ceramic Nuclear Fuel

A number of advances have recently been made in modeling fracture initiation and propagation in ceramic light water reactor (LWR) fuel. These include the use of techniques such as peridynamics, the extended finite element method (XFEM), the discrete element method (DEM), and phase field fracture. Improved predictions of fracture in LWR fuel can benefit fuel performance simulations in a number of ways, with important implications for radial relocation, pellet-cladding mechanical interactions, and fragmentation during accident conditions. Although these modeling approaches appear promising, to-date most of their applications have been to fresh fuel. A major limitation in applying these approaches with confidence to a wider variety of conditions, such as fragmentation of high-burnup fuel, is that there is very limited data that can be directly used to validate the results of these fracture models. While fracture patterns are available from cross-sections of numerous irradiated fuel rods, the fuel rods have typically been subjected to complex irradiation histories. To validate models of fracture propagation, focused experiments that give snapshots of the initiation and propagation of fracture under well characterized prototypical reactor conditions are needed. Under a multi-institutional U.S. Department of Energy Integrated Research Project (IRP), three separate-effects validation experiments are underway to provide information on the propagation of cracks in LWR fuel under controlled conditions. The primary challenge in developing such an experiment is in providing conditions that result in a radial temperature distribution that is prototypical of LWR in-reactor conditions. Two out-of-reactor experiments are being planned that employ very different approaches to achieve such a temperature distribution. The first of these achieves this by employing a combination of inductive and resistive electrical heating to generate volumetric heating. The second experiment involves slowly heating a pellet in a metal rod to a high temperature, and then quenching that rod in a cold bath. The quenching process generates a temperature profile approximating that in an LWR fuel rod for a moment, but has a very different temperature history from the LWR. Finally, an experiment is being planned for the Idaho National Laboratory TREAT reactor that will use nuclear fission as a heat source, and which will employ a metal heat sink to replicate the thermal conditions provided by coolant in an LWR. These experiments all have their advantages and drawbacks, with varying levels of ability to reproduce actual LWR conditions and varying ability to use instruments to monitor quantities of interest over the course of the experiment that can be used to validate fracture models. For that reason, these different experimental approaches are complimentary to each other, and the combined results are expected to significantly improve confidence in the ability of computational models to simulate fracture in ceramic nuclear fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Methods and Usability Enhancements in Shift for Non-LWR Applications

Several development and analysis tasks were undertaken in FY21 under the Nuclear Energy Advanced Modeling and Simulation program to enhance modeling of non light–water reactors (LWRs) with Shift. Specifically, these efforts targeted enhancements for tristructural isotropic (TRISO) fuel modeling. A new Shift user interface was developed that allows for much better usability and ease of modeling for non-LWR problems and TRISO fuel. Performance studies were conducted using an HTR-10 fuel pebble model by comparing different geometry packages in Shift, KENO-VI, and Serpent. These studies showed that the new geometry package in Shift performs well compared to Serpent for TRISO fuel modeling with consistent tracking options between both packages. The studies also identified the most critical areas of improvement for more efficiently performing Monte Carlo transport on TRISO fuel models with Shift. Tally calculations in Shift were optimized for non-LWR cross section generation and depletion calculations, and areas for further optimization and accuracy improvements were identified. Finally, initial collaboration efforts were formed between Idaho National Laboratory, Argonne National Laboratory, and the Nuclear Regulatory Commission to use Shift for Comprehensive Reactor Analysis Bundle support.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reactor Fuel Isotopics and Code Validation for Nuclear Applications

Experimentally measured isotopic concentrations of well characterized spent nuclear fuel (SNF) samples have been collected and analyzed by previous researchers. These sets of experimental data have been used extensively to validate the accuracy of depletion code predictions for given sets of burnups, initial enrichments, and varying power histories for different reactor types. The purpose of this report is to present the diversity of data in a concise manner and summarize the current accuracy of depletion modeling. All calculations performed for this report were done using the Oak Ridge Isotope GENeration (ORIGEN) code, an internationally used irradiation and decay code solver within the SCALE comprehensive modeling and simulation code. The diversity of data given in this report includes key actinides, stable fission products, and radioactive fission products. In general, when using the current ENDF/B-VII.0 nuclear data libraries in SCALE, the major actinides are predicted to within 5% of the measured values. Large improvements were seen for several of the curium isotopes when using improved cross section data found in evaluated nuclear data file ENDF/B-VII.0 as compared to ENDF/B-V-based results. The impact of the flux spectrum on the plutonium isotope concentrations as a function of burnup was also shown. The general accuracy noted for the actinide samples for reactor types with burnups greater than 5,000 MWd/MTU was not observed for the low-burnup Hanford B samples. More work is needed in understanding these large discrepancies. The stable neodymium and samarium isotopes were predicted to within a few percent of the measured values. Large improvements were seen in prediction for a few of the samarium isotopes when using the ENDF/B-VII.0 libraries compared to results obtained with ENDF/B-V libraries. Very accurate predictions were obtained for 133 Cs and 153 Eu. However, the predicted values for the stable ruthenium and rhodium isotopes varied as much as 10% of the measured values, and 109 Ag was consistently over-predicted by as much as 170%. In general, there is a larger uncertainty for modeling radioactive fission products when compared to either the actinides or the stable fission products in SNF. The relative C/E ratios ranged from a few percent for 137 Cs up to 60% and 100% for 106 Ru and 125 Sb, respectively. Limited or no radioactive fission products data exist in the current data sets for reactor types other than PWRs and BWRs. More work is needed in obtaining a greater diversity of radioactive fission product data. While performing this survey, issues leading to inconsistencies in nuclear fission yield data were discovered that specifically impacted the fission product noble gases. Emphasis was given to this legacy data, and corrective actions were taken as described in this report. After the fission yield data were corrected, the stable xenon and krypton fission products were predicted to within 5% of their measurements. However, preliminary results not explicitly given in this report indicate that the relative C/E ratio for the radioactive isotope 85 Kr varied as much as 10%. Due to the complex migration and the difficulty in measuring noble gases in the fuel, a more thorough investigation is needed to understand how accurately depletion codes can calculate these gas concentrations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Status and progress in the U.S. RERTR fuel development program

In 2004, U.S. Energy Secretary Abraham established the Global Threat Reduction Initiative (GTRI). This program set goals for the conversion of many of the world's research and test reactors to low-enriched fuels, including those for which suitable fuels are currently not available. Development of fuels for reactors that cannot currently be converted requires an aggressive program of fuel fabrication development, out-of-pile testing and characterization, irradiation testing, post-irradiation examination, and fuel performance modeling. Both dispersion and monolithic versions of a uranium-molybdenum based fuel are being developed in conjunction with strong international partnerships. The development is being carried out with the intent to qualify a low-enrichment, high- density fuel suitable for utilization in these reactors by the end of 2011, allowing conversion of the U.S. reactors by 2014. An overview of program progress and plans leading to fuel qualification will be presented. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Validation of the Computational Fluid Dynamics Method using the Aboveground Configuration of the Dry Cask Simulator

Dry cask applicants submit their spent nuclear fuel dry storage and transportation cask designs to the U.S. Nuclear Regulatory Commission (NRC) for certification under Title 10 of the Code of Federal Regulations (10 CFR) Part 72, 'Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste, and Reactor-Related Greater Than Class C Waste'. The NRC staff performs its technical review of these designs in accordance with 10 CFR Part 72 and NUREG-1536, 'Standard Review Plan for Spent Fuel Dry Storage Systems at a General License Facility,' Revision 1, issued July 2010. To ensure that the cask and fuel material temperatures of the dry cask storage system remain within the allowable limits or criteria for normal, off-normal, and accident conditions, the NRC staff performs a thermal review as part of the technical review. Recent applications increasingly have used thermalhydraulic analyses using computational fluid dynamics (CFD) codes (e.g., ANSYS FLUENT) to demonstrate the adequacy of the thermal design. The NRC performs validation studies of the FLUENT CFD code to assist it in making regulatory decisions to ensure adequate protection for storage and transportation casks. Recent advances in dry storage cask designs have significantly increased the maximum thermal load allowed in a cask in part by increasing the efficiency of internal conduction pathways and by increasing the internal convection through greater canister helium pressure. In efforts to further validate these designs, the NRC in conjunction with the Department of Energy and Sandia National Laboratories (SNL) are conducting an experiment to capture the effects of elevated helium pressures and accurately portray the external convection of aboveground and belowground canister dry cask systems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermo-Mechanical Analysis of SBLOCA with Loss of One Safety Injection System Using SCDAP/RELAP5

Design Extension Condition (DEC) for nuclear power plants has been being deliberated to bring it within a safety regulation boundary, following the 2011 Fukushima Daiichi accident. Moreover, a new regulation on the LOCA accident analysis designated as 10CFR50.45(c) has been proposed based on a concern of the non-conservatism of current criterion neglecting fuel burn-up effect on the cladding embrittlement. Therefore, a more comprehensive and realistic simulation of fuel rod behavior is required to cope with the stringent environment under LOCA accidents. A SCDAP/RELAP5 system analysis code has been used mainly on the prediction of severe accident phenomena. It has a set of mechanistic models for the fuel deformation, which plays an important role particularly in the early phase progression of the fuel melting. However, limited work has been done focusing on the models only to the fuel failure estimation through the DBA or candidates of DEC. Therefore, some analyses were performed here with a burnup dependent core model to understand the capability of SCDAP/RELAP5 to predict the thermo-mechanical behavior of the fuel cladding such as ballooning, burst and external/internal oxidation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗