Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Complementary Measurements of Residual Stresses Before and After Base Plate Removal in an Intricate Additively-Manufactured Stainless-Steel Valve Housing

Residual stress measurements using neutron diffraction and the contour method were performed on a valve housing made from 316 L stainless steel powder with intricate three-dimensional internal features using laser powder-bed fusion additive manufacturing. The measurements captured the evolution of the residual stress fields from a state where the valve housing was attached to the base plate to a state where the housing was cut free from the base plate. Making use of this cut, thus making it a non-destructive measurement in this application, the contour method mapped the residual stress component normal to the cut plane (this stress field is completely relieved by cutting) over the whole cut plane, as well as the change in all stresses in the entire housing due to the cut. The non-destructive nature of the neutron diffraction measurements enabled measurements of residual stress at various points in the build prior to cutting and again after cutting. Good agreement was observed between the two measurement techniques, which showed large, tensile build-direction residual stresses in the outer regions of the housing. The contour results showed large changes in multiple stress components upon removal of the build from the base plate in two distinct regions: near the plane where the build was cut free from the base plate and near the internal features that act as stress concentrators. These observations should be useful in understanding the driving mechanisms for builds cracking near the base plate and to identify regions of concern for structural integrity. Neutron diffraction measurements were also used to show the shear stresses near the base plate were significantly lower than normal stresses, an important assumption for the contour method because of the asymmetric cut.

36 MATERIALS SCIENCE↗

Single crystal magnetic structure and susceptibility of CoSe{sub 2}O{sub 5}

The structure of CoSe{sub 2}O{sub 5} consists of one-dimensional ribbons of edge-sharing CoO{sub 6} octahedra bound together by polyanionic subunits of Se{sub 2}O{sub 5}. Previous work on polycrystalline samples reported a canted antiferromagnetic arrangement of the magnetic moments below the ordering temperature of 8.5 K. Here, we report a single crystal investigation using variable temperature and field magnetic susceptibility and low-temperature neutron diffraction to more precisely characterize the nature of the magnetic ground state of CoSe{sub 2}O{sub 5}. Contrary to previous reports, we find that the single crystal magnetic structure shows no canting of the antiferromagnetic ground state, and in the process have identified several field-induced changes to the magnetization. We discuss these results in the context of the revised magnetic structure and highlight the importance of crystal growth for the accurate characterization of these properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy

Catastrophic accidents caused by fatigue failures often occur in engineering structures. Thus, a fundamental understanding of cyclic-deformation and fatigue-failure mechanisms is critical for the development of fatigue-resistant structural materials. Here we report a high-entropy alloy with enhanced fatigue life by ductile-transformable multicomponent B2 precipitates. Its cyclic-deformation mechanisms are revealed by real-time in-situ neutron diffraction, transmission-electron microscopy, crystal-plasticity modeling, and Monte-Carlo simulations. Multiple cyclic-deformation mechanisms, including dislocation slips, precipitation strengthening, deformation twinning, and reversible martensitic phase transformation, are observed in the studied high-entropy alloy. Its improved fatigue performance at low strain amplitudes, i.e., the high fatigue-crack-initiation resistance, is attributed to the high elasticity, plastic deformability, and martensitic transformation of the B2-strengthening phase. This study shows that fatigue-resistant alloys can be developed by incorporating strengthening ductile-transformable multicomponent intermetallic phases.

36 MATERIALS SCIENCE↗

Short- and medium-range order in Sb–Se glasses

Neutron diffraction measurements were performed to investigate the structure of Sb{sub x}Se{sub 100−x} bulk glasses with x=5, 10, 15, 20 and 25 at% Sb. The total pair distribution functions show two peaks at 2.36 Å and 2.64 Å, which are attributed to Se–Se and Sb–Se bonds, respectively. The coordination numbers calculated from these peaks indicate that Sb atoms are three-coordinated and Se atoms are two-coordinated for all the above compositions. However, the composition dependences of the first two peaks in the structure factors show an obvious change between 15 and 20 at% Sb, indicating that the medium-range structure is changed in this range of Sb content. In order to elucidate the medium-range structure, reverse Monte Carlo simulation was used with coordination number constraints. The structure models consisting of a mixture of the SbSe{sub 3/2} network and Se{sub n} chain clusters were in good agreement with neutron diffraction data for Se-rich glass (5, 10 and 15 at% Sb). On the other hand, a better fit was obtained for Sb{sub 25}Se{sub 75} glass with a model based on the network structure formed by connected SbSe{sub 3} units. - Graphical abstract: A 50 Å slice of the RMC configuration for Sb{sub 15}Se{sub 85} glass. - Highlights: • Sb atoms are three-coordinated and Se atoms are two-coordinated. • The medium-range structure changes between 15 and 20 at%. • The phase-separation tendency is observed in Se-rich glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic Study of Compositional and Synthetic Control of Vacancy and Magnetic Ordering in Oxygen-Deficient Perovskites Ca2Fe2 xMnxO5+yand CaSrFe2 xMnxO5+y (x = 1/2, 2/3, and 1; y = 0 1/2)

Ten compounds belonging to the series of oxygen-deficient perovskite oxides Ca2Fe2 xMnxO5 and CaSrFe2 xMnxO5+y, where x = 1/2, 2/3, and 1 and y 0 0.5, were synthesized and investigated with respect to the ordering of oxygen vacancies on both local and long-range length scales and the effect on crystal structure and magnetic properties. For the set with y 0 the oxygen vacancies always order in the long-range sense to form the brownmillerite structure containing alternating layers of octahedrally and tetrahedrally coordinated cations. However, there is a change in symmetry from Pnma to Icmm upon substitution of Sr for one Ca for all x, indicating local Td chain (vacancy) disorder. In the special case of CaSrFeMnO5 the neutron diffraction peaks broaden, indicating only short-range structural order on a length scale of 160 . This reveals a systematic progression from Ca2FeMnO5 (Pnma, well-ordered tetrahedral chains) to CaSrFeMnO5 (Icmm, disordered tetrahedral chains, overall short-range order) to Sr2FeMnO5 (Pm3m, destruction of tetrahedral chains in a long-range sense). Systematic changes occur in the magnetic properties as well. While long-range antiferromagnetic order is preserved, the magnetic transition temperature, Tc, decreases for the same x when Sr substitutes for one Ca. A review of the changes in Tc for the series Ca2Fe2 xMxO5, taking into account the tetrahedral/octahedral site preferences for the various M3+ ions, leads to a partial understanding of the origin of magnetic order in these materials in terms of a layered antiferromagnetic model. While in all cases the preferred magnetic moment direction is (010) at low temperatures, there is a cross over for x = 0.5 to (100) with increasing temperature for both the Ca2Fe2 xMnxO5 and the CaSrFe2 xMnxO5 series. For the y > 0 phases, while a brownmillerite ordering of oxygen vacancies is preserved for the Ca2 phases, a disordered Pm3m cubic perovskite structure is always found when Sr is substituted for one Ca. Long-range magnetic order is also lost, giving way to spin glass or cluster-glass-like behavior below 50 K. For the x = 0.5 phase, neutron pair distribution function (NPDF) studies show a local structure related to brownmillerite ordering of oxygen vacancies. Neutron diffraction data at 3.8 K show a broad magnetic feature, incommensurate with any multiple of the chemical lattice, and with a correlation length (magnetic domain) of 6.7(4) .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Towards automated crystallographic structure refinement with phenix.refine

phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods. phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. It has several automation features and is also highly flexible. Several hundred parameters enable extensive customizations for complex use cases. Multiple user-defined refinement strategies can be applied to specific parts of the model in a single refinement run. An intuitive graphical user interface is available to guide novice users and to assist advanced users in managing refinement projects. X-ray or neutron diffraction data can be used separately or jointly in refinement. phenix.refine is tightly integrated into the PHENIX suite, where it serves as a critical component in automated model building, final structure refinement, structure validation and deposition to the wwPDB. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Characterization of 5- and 6- Coordinated Alkali Pertechnetates

The local chemistry of technetium-99 ( 99 Tc) in oxide glasses is important for understanding the incorporation and long-term release of Tc from nuclear waste glasses, both those for legacy defense wastes and fuel reprocessing wastes. Tc preferably forms Tc(VII), Tc(IV), or Tc(0) in glass, depending on the level of reduction of the melt. Tc(VII) in oxide glasses is normally assumed to be isolated pertechnetate TcO 4 - anions surrounded by alkali, but can occasionally precipitate as alkali pertechnetate salts such as KTcO 4 and NaTcO 4 when Tc concentration is high. In these cases, Tc(VII) is 4-coordinated by oxygen. A reinvestigation of the chemistry of alkali-technetium-oxides formed under oxidizing conditions and at temperatures used to prepare nuclear waste glasses showed that higher coordinated alkali Tc(VII) oxide species had been reported, including those with the TcO 5 - and TcO 6 - anions. The chemistry of alkali Tc(VII) and other alkali-Tc-oxides is reviewed, along with relevant synthesis conditions. Additionally, we report attempts to make 5- and 6-coordinate pertechnetate compounds of K, Na, and Li, i.e. TcO 5 - and TcO 6 -. It was found that higher coordinated species are very sensitive to water, and easily decompose into their respective pertechnetates. It was difficult to obtain pure compounds, but mixtures of the pertechnetate and other phase(s) were frequently found, as evidenced by x-ray absorption spectroscopy (XAS), neutron diffraction (ND), and Raman spectroscopy. Low temperature electron paramagnetic resonance (EPR) measurements showed the possibility of Tc(IV) and Tc(VI) in Na 3 TcO 5 and Na 5 TcO 6 compounds. Here, it was hypothesized that the smaller counter cation would result in more stable pertechnetates. To confirm the synthesis method, LiReO 4 and Li 5 ReO 6 were prepared, and their Raman spectra match those in the literature. Subsequently, the Tc versions LiTcO 4 and Li 5 TcO 6 were synthesized and characterized by ND, Raman spectroscopy, XANES, and EXAFS. The Li 5 TcO 6 was a marginally stable compound that appears to have the same structure as that known for Li 5 ReO 6 . Implications of the experimental work on stability of alkali technetate compounds and possible role in the volatilization of Tc are discussed.

36 MATERIALS SCIENCE↗

Magnetic structure of triangular lattice compound Tb2Ni0.90Si2.94

AlB 2 -type ternary intermetallic compound Tb 2 Ni 0.90 Si 2.94 (space group P 6=mmm, hP 3, No. 191) was reported to exhibit spin freezing behaviour of the ferromagnetic clusters present in the system below T f = 9:9 K, along with the presence of spatially limited antiferromagnetic phase. In this work, on the basis of variable temperature zero-field neutron diffraction measurements, we have shown that the antiferromagnetic phase transition occurs for the compound below T N ~13 K. Neutron diffraction study indicates ab-plane non-collinear sine-modulated antiferromagnetic ordering of the system with wave vectors of k 1 = [±1/6, ±1/6, 0] and k 2 = [±1/3, ±1/3, 0] down to 1.7 K. The weak and diffuse nature of the magnetic Bragg peaks along with limited coherence length further confirm the short-range nature of the antiferromagnetic phase in this compound.

36 MATERIALS SCIENCE↗

Magnetic interactions in PdCrO 2 and their effects on its magnetic structure

We report a neutron scattering study of the metallic triangular lattice antiferromagnet PdCrO 2 . Powder neutron diffraction measurements confirm that the crystalline space group symmetry remains R$\bar{3}$m below T N . This implies that magnetic interactions consistent with the crystal symmetry do not stabilize the noncoplanar magnetic structure, which was one of two structures previously proposed on the basis of single crystal neutron diffraction measurements. Inelastic neutron scattering measurements find two gaps at low energies, which can be explained as arising from a dipolar-type exchange interaction. This symmetric anisotropic interaction also stabilizes a magnetic structure very similar to the coplanar magnetic structure, which was also suggested by the single crystal diffraction study. In conclusion, the higher-energy magnon dispersion can be modelled by linear spin-wave theory with exchange interactions up to sixth nearest neighbors, but discrepancies remain which hint at additional effects unexplained by the linear theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect chemistry of phospho-olivine nanoparticles synthesized by a microwave-assisted solvothermal process

Nanocrystalline LiFePO{sub 4} powders synthesized by a microwave-assisted solvothermal (MW-ST) process have been structurally characterized with a combination of high resolution powder neutron diffraction, synchrotron X-ray diffraction, and aberration-corrected HAADF STEM imaging. A significant level of defects has been found in the samples prepared at 255 and 275 °C. These temperatures are significantly higher than what has previously been suggested to be the maximum temperature for defect formation in LiFePO{sub 4}, so the presence of defects is likely related to the rapid MW-ST synthesis involving a short reaction time (∼5 min). A defect model has been tentatively proposed, though it has been shown that powder diffraction data alone cannot conclusively determine the precise defect distribution in LiFePO{sub 4} samples. The model is consistent with other literature reports on nanopowders synthesized at low temperatures, in which the unit cell volume is significantly reduced relative to defect-free, micron-sized LiFePO{sub 4} powders. - Graphical abstract: Temperature-dependent antisite defect formation has been observed in nanocrystalline LiFePO{sub 4} powders synthesized by a microwave solvothermal process, using high resolution diffraction and STEM imaging. Display Omitted - Highlights: • LiFePO{sub 4} nanopowders synthesized by a microwave-assisted solvothermal process. • Defects directly observed by aberration-corrected HAADF STEM imaging. • Antisite defects present from synthesis at 255 and 275 °C. • Defects present from higher temperature synthesis than previously reported. • Powder diffraction data have been analyzed in detail for various defect models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A re-investigation of the crystal structure and luminescence of BaCa{sub 2}MgSi{sub 2}O{sub 8}:Eu{sup 2+}

Barium calcium magnesium silicate (BaCa{sub 2}MgSi{sub 2}O{sub 8}), a compound whose space group was obtained via X-ray diffraction data, was re-investigated using neutron diffraction techniques. A combined powder X-ray and neutron Rietveld method revealed that BaCa{sub 2}MgSi{sub 2}O{sub 8} crystallizes in the trigonal space group P3-bar (Z=1, a=5.42708(5) A, c=6.79455(7) A, V=173.310(4) A{sup 3}; R{sub p}/R{sub wp}=5.52%/7.63%), instead of the previously believed space group P3-bar m1. The difference in the two structures arises from the displacement of the O2 atom. Blue emission from Ba{sub 0.98}Eu{sub 0.02}Ca{sub 2}MgSi{sub 2}O{sub 8} under 325-nm excitation is ascribed to the 4f{sup 6}5d{sup 1}{yields}4f{sup 7} transitions of Eu{sup 2+} ions at Ba sites and Ca sites. Site assignment of Eu{sup 2+} ions in the titled compound was performed by analysis of emission spectra at temperatures in the range of 4.2-300 K. - Graphical abstract: A combined powder X-ray and neutron Rietveld method reveals that BaCa{sub 2}MgSi{sub 2}O{sub 8} crystallizes in the trigonal space group P3-bar , instead of the previously believed space group P3-bar m1 from X-ray diffraction data. Highlights: > Re-investigation of the structure using neutron diffraction data. > The correct space group is P3-bar , not P3-bar m1. > Identification of Eu{sup 2+} sites using temperature-variable luminescence.{yields} The emission at the shorter wavelength corresponds to the Ba site in the compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variation of Physical Properties in the Nominal Sr4V2O6Fe2As2

We show using a combination of powder X-ray and neutron diffraction, first-principles calculations, temperature- and field-dependent magnetization, heat capacity and resistivity data that the superconducting behavior of Sr{sub 4}V{sub 2}O{sub 6}Fe{sub 2}As{sub 2} is dependent on synthesis conditions, particularly, heating profiles result in unintentional chemical doping. This compound can be tuned from a state in which the vanadium electrons are itinerant with a high electronic density of states, to a state where the vanadium-oxide layers are insulating and presumably magnetic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Twin-variant reorientation strain in Ni-Mn-Ga single crystal during quasi-static mechanical compression

Twin variant reorientation in single crystal Ni-Mn-Ga during quasi-static mechanical compression was studied using in-situ neutron diffraction. The volume fraction of reoriented twin variants for different stress amplitudes were obtained from the changes in integrated intensities of high-order neutron diffraction peaks. It is shown that during compressive loading, ~85% of the twins were reoriented parallel to the loading direction resulting in a maximum macroscopic strain of ~5.5%, which is in agreement with measured macroscopic strain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting

Theta-shaped specimens were additively manufactured out of Inconel 718 powders using an electron beam melting technique, as a model complex load bearing structure. We employed two different build strategies; producing two sets of specimens. Microstructural and micro-mechanical characterizations were performed using electron back-scatter, synchrotron x-ray and in-situ neutron diffraction techniques. In particular, the cross-members of the specimens were the focus of the synchrotron x-ray and in-situ neutron diffraction measurements. The build strategies employed resulted in the formation of distinct microstructures and crystallographic textures, signifying the importance of build-parameter manipulation for microstructural optimization. Large strain anisotropy of the different lattice planes was observed during in-situ loading. Texture was concluded to have a distinct effect upon both the axial and transverse strain responses of the cross-members. In particular, the (200), (220) and (420) transverse lattice strains all showed unexpected overlapping trends in both builds. This was related to the strong {200} textures along the build/loading direction, providing agreement between the experimental and calculated results.

36 MATERIALS SCIENCE↗

Spin dynamics, short-range order, and spin freezing in Y{sub 0.5}Ca{sub 0.5}BaCo{sub 4}O{sub 7}

Y{sub 0.5}Ca{sub 0.5}BaCo{sub 4}O{sub 7} was recently introduced as a possible candidate for capturing some of the predicted classical spin kagome ground-state features. Stimulated by this conjecture, we have taken up a more complete study of the spin correlations in this compound with neutron scattering methods on a powder sample characterized with high-resolution neutron diffraction and the temperature dependence of magnetic susceptibility and specific heat. We have found that the frustrated near-neighbor magnetic correlations involve not only the kagome planes but concern the full Co sublattice, as evidenced by the analysis of the wave-vector dependence of the short-range order. We conclude from our results that the magnetic moments are located on the Co sublattice as a whole and that correlations extend beyond the two-dimensional kagome planes. We identify intriguing dynamical properties, observing high-frequency fluctuations with a Lorentzian linewidth {Gamma}{<=}20 meV at ambient temperature. On cooling a low-frequency ({approx}1 meV) dynamical component develops alongside the high-frequency fluctuations, which eventually becomes static at temperatures below T{approx_equal}50 K. The high-frequency response with an overall linewidth of {approx}10 meV prevails at T{<=}2 K, coincident with a fully elastic short-range-ordered contribution.

36 MATERIALS SCIENCE↗

Disorder-driven spin-reorientation in multiferroic h-YMn{sub 1−x}Fe{sub x}O{sub 3}

Magnetic structure evolution of multiferroic hexagonal YMn{sub 1−x}Fe{sub x}O{sub 3} (x = 0, 0.05, and 0.1) has been studied by carrying out detailed temperature-dependent neutron diffraction at zero and 5 T fields. Thermodynamic data confirm antiferromagnetic ordering at T{sub N} in all the compositions. Our sub-T{sub N} neutron diffraction results assign the magnetic structure of pure YMnO{sub 3} to Γ{sub 1} irreducible representation. Over the perturbative-doping range, magnetic structure changes via Γ{sub 1} + Γ{sub 2} for YMn{sub 0.95}Fe{sub 0.05}O{sub 3} on to Γ{sub 2} for YMn{sub 0.9}Fe{sub 0.1}O{sub 3}, as the maiden compositional analogue of spin-reorientation; its occurrence in temperature-domain already reported for several manganites. Moreover, while the large thermal isostructural changes observed above T{sub N} are subdued in the ordered state, small alterations by the applied 5 T-field are relatively uniform across, confirming strong magneto-elastic nature of the system. Decrease of the ordered magnetic moment (μ{sub ord}) and planar magnetic frustration noted with Fe-doping is enhanced by the applied field, apparently through canting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗