Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model calibration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Emergency Locator Transmitter System Performance During Three Full-Scale General Aviation Crash Tests

Full-scale crash tests were conducted on three Cessna 172 aircraft at NASA Langley Research Center's Landing and Impact Research facility during the summer of 2015. The purpose of the three tests was to evaluate the performance of commercially available Emergency Locator Transmitter (ELT) systems and support development of enhanced installation guidance. ELTs are used to provide location information to Search and Rescue (SAR) organizations in the event of an aviation distress situation, such as a crash. The crash tests simulated three differing severe but survivable crash conditions, in which it is expected that the onboard occupants have a reasonable chance of surviving the accident and would require assistance from SAR personnel. The first simulated an emergency landing onto a rigid surface, while the second and third simulated controlled flight into terrain. Multiple ELT systems were installed on each airplane according to federal regulations. The majority of the ELT systems performed nominally. In the systems which did not activate, post-test disassembly and inspection offered guidance for non-activation cause in some cases, while in others, no specific cause could be found. In a subset of installations purposely disregarding best practice guidelines, failure of the ELT-to-antenna cabling connections were found. Recommendations for enhanced installation guidance of ELT systems will be made to the Radio Technical Commission for Aeronautics (RTCA) Special Committee 229 for consideration for adoption in a future release of ELT minimum operational performance specifications. These recommendations will be based on the data gathered during this test series as well as a larger series of crash simulations using computer models that will be calibrated based on these data

Littell, Justin D.↗
NASA NTRS2013

Parameter Estimation for Compact Binary Coalescence Signals with the First Generation Gravitational-Wave Detector Network

Compact binary systems with neutron stars or black holes are one of the most promising sources for ground-based gravitational-wave detectors. Gravitational radiation encodes rich information about source physics; thus parameter estimation and model selection are crucial analysis steps for any detection candidate events. Detailed models of the anticipated waveforms enable inference on several parameters, such as component masses, spins, sky location and distance, that are essential for new astrophysical studies of these sources. However, accurate measurements of these parameters and discrimination of models describing the underlying physics are complicated by artifacts in the data, uncertainties in the waveform models and in the calibration of the detectors. Here we report such measurements on a selection of simulated signals added either in hardware or software to the data collected by the two LIGO instruments and the Virgo detector during their most recent joint science run, including a blind injection where the signal was not initially revealed to the collaboration. We exemplify the ability to extract information about the source physics on signals that cover the neutron-star and black-hole binary parameter space over the component mass range 1M25M and the full range of spin parameters. The cases reported in this study provide a snapshot of the status of parameter estimation in preparation for the operation of advanced detectors.

Aasi, J.↗
NASA NTRS2019

Stress Intensity Factors for Layered Pressure Vessel Inner Layer Through Cracks

A difficulty encountered when performing Fitness-for- Service assessments for layered pressure vessels (LPVs) is the lack of stress intensity factor solution in literature that produce accurate results for inner layer longitudinal through cracks. Using surrogate solutions such as a through crack in a plate or cylinder produce results that can be overly conservative especially for longer cracks. This is largely due to the ability of a layered pressure vessel to redistribute hoop load to other layers, the restricted radial movement of the cracked layer, and the friction forces applied in the cracked region. To understand this problem, a parametric finite element model (FEM) generator was developed that is capable of producing layered pressure vessel models with inner layer through cracks. The results from the FEMs were used to create a dataset of inner layer through crack stress intensity factors (KI) for layered pressure vessels corresponding to variations of internal pressure, radius, layer thicknesses, friction factor, and crack length. The elastic modulus of the material also has an effect on KI but, for this dataset, the elastic modulus was fixed at the typical value for steel - 29,500 ksi (203 GPa). Finally, a non-dimensional model was developed and calibrated using the dataset. This allows KI to be calculated without the need of a FEM using a closed-form equation. The results of the closed-form solution were then compared to FEM results showing accuracy was generally within 10%.

Hobbs, Joel R.↗
NASA NTRS2020

Mapping tall shrub biomass in Alaska at landscape scale using structure-from-motion photogrammetry and lidar

Warming in arctic and boreal regions is increasing shrub cover and biomass. In southcentral Alaska, willow (Salix spp.) and alder (Alnus spp.) shrubs grow taller than many tree species and account for a substantial proportion of aboveground biomass, yet they are not individually measured as part of the operational Forest Inventory and Analysis (FIA) Program. The goal of this research was to test methods for landscape-scale mapping of tall shrub biomass in upper montane and subalpine environments using FIA-type plot measurements (n = 51) and predictor variables from imagery-based structure-from-motion (SfM) and airborne lidar. Specifically, we compared biomass models constructed from imagery acquired by unmanned aerial vehicle (UAV; ~1.7 cm pixels), imagery from the NASA Goddard's Lidar, Hyperspectral, and Thermal Airborne Imager (G-LiHT; ~3.1 cm pixels), and concomitant G-LiHT small-footprint lidar. Tall shrub biomass was most accurately predicted at 5 m resolution (R^2 = 0.81, RMSE = 1.09 kg/sq. m) using G-LiHT SfM color and structure variables. Lidar-only models had lower precision (R^2 = 0.74, RMSE = 1.26 kg/sq. m), possibly due to reduced model information content from variable multicollinearity or lower data density. Separate models for upper montane zones with trees and shrubs and subalpine zones with only shrubs were always chosen over single models based on minimization of Akaike's Information Criterion, indicating the need for variable sets robust to overhanging tree canopy. Decreasing point density from UAV (5000–8000 pts./sq. m) to the G-LiHT SfM point cloud (500–2000 pts./sq. m) had little impact on model fit, suggesting that high-resolution airborne imagery can extend SfM approaches well beyond line-of-sight restrictions for UAV platforms. Overall, our results confirmed that SfM from high-resolution imagery is a viable approach to estimate shrub biomass in the boreal region, especially when an existing lidar terrain model and local field calibration data are available to quantify uncertainty in the SfM point cloud and landscape-scale estimates of shrub biomass.

Michael Alonzo↗
NASA NTRS2022

Insights from the Topographic Characteristics of a Large Global Catalog of Rainfall-Induced Landslide Event Inventories

Landslides are a key hazard in high-relief areas around the world and pose a risk to population and infrastructure. It is important to understand where landslides are likely to occur in the landscape to inform local analyses of exposure and potential impacts. Large triggering events such as earthquakes or major rain storms often cause hundreds or thousands of landslides, and mapping the landslide populations generated by these events can provide extensive datasets of landslide locations. Previous work has explored the characteristic locations of landslides triggered by seismic shaking, but rainfall induced landslides are likely to occur in different parts of a given landscape when compared to seismically induced failures. Here we show measurements of a range of topographic parameters associated with rainfall-induced landslides inventories, including a number of previously unpublished inventories which we also present here. We find that average upstream angle and compound topographic index are strong predictors of landslide scar location, while local relief and topographic position index provide a stronger sense of where landslide material may end up (and thus where hazard may be highest). By providing a large compilation of inventory data for open use by the landslide community, we suggest that this work could be useful for other regional and global landslide modelling studies and local calibration of landslide susceptibility assessment, as well as hazard mitigation studies.

Robert Emberson↗
NASA NTRSDate not supplied

In-situ Testing to Acquire HR-EBSD and DIC Strain Data Within a Coincident Domain

For this project, an inked rubber stamp was applied to a small Inconel 625 specimen. The stamp transferred a thin pattern with microscale features for digital image correlation (DIC). The pattern is easily visible at lower voltages and thin enough to not obstruct backscattered electrons. The unique characteristics of the pattern enabled the concurrent acquisition of DIC and high-resolution electron backscatter diffraction (HR-EBSD) data while the specimen was loaded in-situ. The challenges of in-situ testing and combining EBSD with DIC measurements are discussed. By combining the elastic strains (from HR-EBSD) and total strains (from DIC) the result of this approach is an estimate of stress- strain behavior at points across the specimen surface. This combined dataset can then be used as higher-fidelity data in the calibration of crystal plasticity models.

Will Gilliland↗
NASA NTRSDate not supplied

Influence of the Perception Constraint, Installation Effects, and Broadband SelfNoise on Low-Fidelity, Multi-point, UAM Vehicle Perception-Influenced-Design(PID) Optimization

UAM vehicles represent a unique challenge in acoustics because there are a limited number of full-scale datasets that can be used to calibrate and validate prediction models. In addition, acoustics is considered more often in the early design loop as a higher priority concern in UAM vehicle design, whereas with traditional vehicles, acoustics is typically addressed with post-design constraints. This paper will present an approach in design optimization of a proprotor in two flight conditions, hover, and forward flight, with several acoustic objective functions that simulate community response. An adjoint-capable vortex-lattice method (VLM), implemented in VSPAERO, will be used to compute the blade forces and inflow properties required to compute tonal and broadband noise using the second-generation Aircraft NOise Prediction Program (ANOPP2). In addition, a wing is placed near the proprotor to simulate installation effects on a vehicle’s wing. The influence of rotation rate, chord distribution, twist angle, and sweep on installation, broadband noise, and choice of perception constraint from the design optimization will be shown.

acoustics↗
NASA NTRS2022

Estimates of Diurnal and Daily Net Primary Productivity Using the Geostationary Ocean Color Imager (GOCI) Data

For the past three decades, polar-orbiting ocean color satellites have provided local, regional to global scale estimates of oceanic net primary production that have greatly aided studies of ocean carbon cycling, food web dynamics and climate change. Despite considerable progress, accurate estimates of daily ocean productivity from space have not been realized because polar-orbiting satellites are unable to account for variations in phytoplankton physiology and carbon fixation rates from changing incident irradiance levels over the course of the day. Here we have attempted to exploit the unique short-temporal measurements provided by the Korean Geostationary Ocean Color Imager (GOCI), to obtain for the first time, diurnal and daily measurements of surface- and euphotic-column integrated Net Primary Productivity (NPP). These estimates are based on the Absorption Based Productivity Model (AbPM), and are calibrated with a bio-optical database of measurements made at different times of the day during the Korea-US Ocean Color (KORUS-OC) cruise in May–June 2016. Photo-physiological rate estimates, varied across different water types encountered around the Korean Peninsula, but on account of their limited number, were regionally scaled through the use of dynamic optical-biogeochemical (O-BGC) Biomes. Comparisons of GOCI derived estimates of daily and weekly integrated NPP against in-situ measurements, clearly underscore the superiority of geostationary over polar-orbiting ocean color satellites, which consider the strong short-term fluctuations in phytoplankton light absorption and incident irradiance fields over the course of the day.

Diurnal productivity↗
NASA NTRS2023

The Earth in Living Color - NASA’s Surface Biology and Geology Designated Observable

The Surface Biology and Geology (SBG) Designated Observable will transform our understanding of the global land surface, inland and coastal aquatic ecosystems through visible-to-shortwave infra-red imaging (VSWIR) spectroscopy and thermal infra-red (TIR) imaging. SBG is one of four high-priority observables recommended in the 2017 NASA Earth Science Decadal Survey t o address science questions on vegetation and aquatic ecosystem health, snow-cover dynamics, volcanic activity, and minerology. With a planned launch readiness date of 2028, SBG is currently in Pre-Phase A, with Level 1 requirements being developed for a two-spacecraft architecture, including an additional constellation pathfinder. The recommended architecture emerged from an extensive study (2018-2021) that engaged the research and applications community to consider the science questions and measurement objectives of the Decadal Survey. A Science and Applications Traceability Matrix was used as a basis for scoring candidate architectures, with inputs from four working groups that covered algorithms, applications, calibration and validation, and modeling. Two pathfinder studies, Modeling End-to-End Traceability in support of SBG (MEET-SBG) and Space-based Imaging Spectroscopy and Thermal pathfindER (SISTER) are providing pre-launch modeling tools and data for algorithm development to support science value trades. The architecture consists of one spacecraft hosting a wide-swath VSWIR imaging spectrometer providing 30-m ground-sample distance (GSD), a spectral range of 380-2500 nm (at 10 nm resolution), 16-day revisit with 400 signal-to-noise for VNIR and 250 for SWIR (at 25% reflectance). A separate spacecraft will host a wide swath thermal imager, with five to seven bands placed between 4-12 μm), with 60-m (GSD), 3- day revisit, and 0.2K noise-equivalent differential temperature (NeDT). A VNIR compact camera will be hosted on the TIR spacecraft to enable coincident TIR and VNIR observations. A constellation pathfinder will evaluate options for enabling VSWIR mission continuity using Small Sats or data buys. Partnerships with international space agencies contribute technology as well as improvements to temporal revisit. SBG, when launched, will be the first dedicated mission collecting the full spectra of the Earth’s ‘living color’ and will play a critical role in NASA’s Earth System Observatory.

David S Schimel↗
NASA NTRS2024

Development Testing and Analysis of the Integrated Gateway-ESPRIT Bipropellant Refuelling System

The Gateway will be humanity’s first space station orbiting the Moon completed by NASA in partnership with ESA and other US and international partners. The Gateway will provide critical support to sustainable human exploration on the moon through the Artemis program. To enable the Lunar Gateway to complete its mission, on orbit refuelling is essential. The ESPRIT Refuelling Module (ERM) will provide the capability to transfer propellants, MMH and MON-3, through the Habitation and Logistics Outpost (HALO) to the Power and Propulsion Element (PPE). The transfer of these propellants carries known risks and hazards. These hazards include overpressure of the propellant lines during priming sequences between modules and during refuelling pause operations. To support the early system development and to mitigate these risks, a collaborative test program between NASA, ESA and Thales Alenia Space was completed at the Thales Alenia Space test facility in Harwell, UK. This test program integrated fluidic breadboards of the ERM, HALO and PPE modules. The objectives of the test program were to demonstrate and characterise critical performance and transient operations, inform refuelling concept of operations and to calibrate and validate numerical models of the refuelling subsystem in EcosimPro. To support the completion of this final objective a detailed model of the integrated breadboard was developed in EcosimPro and key steady-state and transient test cases were simulated. As an industry first, a National Institute of Standards and Technology (NIST) database correlation for Hydrofluoroether (HFE-7000) was used as a mixed oxides of nitrogen (MON-3) simulant with EcosimPro and European Space Propulsion System Simulation (ESPSS) libraries to result in a more accurate analysis for transient phenomenon such as priming. The test and simulation data showed good agreement validating the model for further system analysis as the ERM design progresses.

Refuelling↗
NASA NTRS2004

Status of Aqua MODIS On-orbit Calibration and Characterization

The MODIS Flight Model 1 (FM1) has been in operation for more than two years since its launch onboard the NASA's Earth Observing System (EOS) Aqua spacecraft on May 4, 2002. The MODIS has 36 spectral bands: 20 reflective solar bands (RSB) with center wavelengths from 0.41 to 2.2 micron and 16 thermal emissive bands (TEB) from 3.7 to 14.5 micron. It provides the science community observations (data products) of the Earth's land, oceans, and atmosphere for a board range of applications. Its primary on-orbit calibration and characterization activities are performed using a solar diffuser (SD) and a solar diffuser stability monitor (SDSM) system for the RSB and a blackbody for the TEB. Another on-board calibrator (OBC) known as the spectro-radiometric calibration assembly (SRCA) is used for the instrument's spatial (TEB and RSB) and spectral (RSB only) characterization. We present in this paper the status of Aqua MODIS calibration and characterization during its first two years of on-orbit operation. Discussions will be focused on the calibration activities executed on-orbit in order to maintain and enhance the instrument's performance and the quality of its Level 1B (L1B) data products. We also provide comparisons between Aqua MODIS and Terra MODIS (launched in December, 1999), including their similarity and difference in response trending and optics degradation. Existing data and results show that Aqua MODIS bands 8 (0.412 micron) and 9 (0.443 micron) have much smaller degradation than Terra MODIS bands 8 and 9. The most noticeable feature shown in the RSB trending is that the mirror side differences in Aqua MODIS are extremely small and stable (<0.1%) while the Terra MODIS RSB trending has shown significant mirror side difference and wavelength dependent degradation. The overall stability of the Aqua MODIS TEB is also better than that of the Terra MODIS during their first two years of on-orbit operation.

Aqua↗
NASA NTRSDate not supplied

In Pursuit of CFD-based Wind Tunnel Calibrations

Computational fluid dynamic simulations of models tested in wind tunnels require a high level of fidelity and accuracy, particularly for the purposes of CFD validation efforts. Considerable effort is required to ensure a sufficient characterization of both the physical geometry of the wind tunnel, the thermodynamics of the tunnel, and flow conditions in the test section. The condition setting process among subsonic wind tunnels, closed or open throat, is generally the same, though they can differ in specific details of the thermodynamics. The derivation, application, and error estimation of condition setting and calibration is discussed. Computational flow solutions of the high-speed leg of the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel are used to evaluate the calibration process and discuss calibration curve sensitivities. Duplicating the characteristics of a particular wind tunnel is difficult at best. A calibration curve derived from the computational method is the most consistent method to use for tunnel condition setting.

wind tunnel↗
NASA NTRS1975

A digital algorithm for characteristic film curves

The task of establishing a film calibration scheme for magnitude studies of Skylab photographic images of Comet Kohoutek is examined. Since the data are recorded in terms of film density and have to be used in terms of exposure, the conversion from density to exposure is critical. In this film calibration scheme, the hardware deals with the data sources, recording medium, and data conversion to a computer compatible program, whereas the software deals with signal to noise enhancement, stepwedge calibration curve and leads to modeling of the film characteristic curves. A mathematical model of the characteristic curve is obtained using a modified version of Efroymson's (1960) stepwise multiple linear regression algorithm, which gives log exposure as a function of density. The difference in the calibration curves from pre- and postflight exposures is well accounted for in the model as a result of sensitive statistical tests. The characteristic curve modeling program requires about 4K of core and is executed in about 3 min.

Buckner, J.↗
NASA NTRS2007

Effect of Insertion of a Heat Flux Gage into a High Temperature Cylindrical Blackbody Cavity on the Gage

Detailed transient thermal models have been developed to simulate a heat flux gage calibration process capable of generating high heat flux levels. These heat flux levels are of interest to the reciprocating and gas turbine engine industries as well as the aerospace industry. The transient models are based on existing, experimentally validated steady state models of a cylindrical blackbody calibration system. The steady state models were modified to include insertion of a heat flux gage into the hot zone of the calibration system, time-varying electrical current that passes through the resistance heated blackbody, and the resulting heating of the heat flux gage. Heat fluxes computed using detailed transient models were compared to experimental measurements. The calculated and measured transient heat fluxes agreed to within 2 percent, indicating that the models had captured the physical phenomena in the transient calibration. The predicted and measured transient heat fluxes were also compared for two different blackbody configurations. The effect of convection on the blackbody extension was evaluated and found to be a minor factor.

Abdelmessih, Amanie N.↗
NASA NTRSDate not supplied

On-Orbit Cross Calibration Between the Osiris-Rex Orbiting Laser Altimeter and Navigation Camera

Accurate shape models of small bodies provide both science value and resources for precision relative navigation. One instrument commonly used for generating shape models is the laser altimeter. Laser altimeters require accurate intrinsic and extrinsic calibration knowledge to produce accurate shape models. Here, we describe a method used for updating the intrinsic and extrinsic calibration parameters of the laser altimeter onboard the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft, OLA (OSIRISREx Laser Altimeter). We perform the calibration update by comparing the OLA scans with monocular camera images of the asteroid surface captured by the primary navigation camera.

Andrew J. Liounis↗
NASA NTRS1994

Accuracy metrics for judging time scale algorithms

Time scales have been constructed in different ways to meet the many demands placed upon them for time accuracy, frequency accuracy, long-term stability, and robustness. Usually, no single time scale is optimum for all purposes. In the context of the impending availability of high-accuracy intermittently-operated cesium fountains, we reconsider the question of evaluating the accuracy of time scales which use an algorithm to span interruptions of the primary standard. We consider a broad class of calibration algorithms that can be evaluated and compared quantitatively for their accuracy in the presence of frequency drift and a full noise model (a mixture of white PM, flicker PM, white FM, flicker FM, and random walk FM noise). We present the analytic techniques for computing the standard uncertainty for the full noise model and this class of calibration algorithms. The simplest algorithm is evaluated to find the average-frequency uncertainty arising from the noise of the cesium fountain's local oscillator and from the noise of a hydrogen maser transfer-standard. This algorithm and known noise sources are shown to permit interlaboratory frequency transfer with a standard uncertainty of less than 10(exp -15) for periods of 30-100 days.

Douglas, R. J.↗
NASA NTRS1991

Study of geopotential error models used in orbit determination error analysis

The uncertainty in the geopotential model is currently one of the major error sources in the orbit determination of low-altitude Earth-orbiting spacecraft. The results of an investigation of different geopotential error models and modeling approaches currently used for operational orbit error analysis support at the Goddard Space Flight Center (GSFC) are presented, with emphasis placed on sequential orbit error analysis using a Kalman filtering algorithm. Several geopotential models, known as the Goddard Earth Models (GEMs), were developed and used at GSFC for orbit determination. The errors in the geopotential models arise from the truncation errors that result from the omission of higher order terms (omission errors) and the errors in the spherical harmonic coefficients themselves (commission errors). At GSFC, two error modeling approaches were operationally used to analyze the effects of geopotential uncertainties on the accuracy of spacecraft orbit determination - the lumped error modeling and uncorrelated error modeling. The lumped error modeling approach computes the orbit determination errors on the basis of either the calibrated standard deviations of a geopotential model's coefficients or the weighted difference between two independently derived geopotential models. The uncorrelated error modeling approach treats the errors in the individual spherical harmonic components as uncorrelated error sources and computes the aggregate effect using a combination of individual coefficient effects. This study assesses the reasonableness of the two error modeling approaches in terms of global error distribution characteristics and orbit error analysis results. Specifically, this study presents the global distribution of geopotential acceleration errors for several gravity error models and assesses the orbit determination errors resulting from these error models for three types of spacecraft - the Gamma Ray Observatory, the Ocean Topography Experiment, and the Cosmic Background Explorer.

Yee, C.↗