Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Data-Driven Radiative Hydrodynamic Modeling of the 2014 March 29 X1.0 Solar Flare

Spectroscopic observations of solar flares provide critical diagnostics of the physical conditions in the flaring atmosphere. Some key features in observed spectra have not yet been accounted for in existing flare models. Here we report a data-driven simulation of the well-observed X1.0 flare on 2014 March 29 that can reconcile some well-known spectral discrepancies. We analyzed spectra of the flaring region from the Interface Region Imaging Spectrograph (IRIS) in Mg II hk, the Interferometric BIdimensional Spectropolarimeter at the Dunn Solar Telescope (DSTIBIS) in H(alpha) 6563A and Ca II 8542A, and the Reuven Ramaty High Energy Solar Spectroscope Imager (RHESSI) in hard X-rays. We constructed a multithreaded flare loop model and used the electron flux inferred from RHESSI data as the input to the radiative hydrodynamic code RADYN to simulate the atmospheric response. We then synthesized various chromospheric emission lines and compared them with the IRIS and IBIS observations. In general, the synthetic intensities agree with the observed ones, especially near the northern footpoint of the flare. The simulated Mg II line profile has narrower wings than the observed one. This discrepancy can be reduced by using a higher microturbulent velocity (27 km/s) in a narrow chromospheric layer. In addition, we found that an increase of electron density in the upper chromosphere within a narrow height range of approx. 800 km below the transition region can turn the simulated Mg II line core into emission and thus reproduce the single peaked profile, which is a common feature in all IRIS flares.

Da Costa, Fatima Rubio↗

Smectite Formation in the Presence of Sulfuric Acid: Implications for Acidic Smectite Formation on Early Mars

The excess of orbital detection of smectite deposits compared to carbonate deposits on the martian surface presents an enigma because smectite and carbonate formations are both favored alteration products of basalt under neutral to alkaline conditions. We propose that Mars experienced acidic events caused by sulfuric acid (H2SO4) that permitted phyllosilicate, but inhibited carbonate, formation. To experimentally verify this hypothesis, we report the first synthesis of smectite from Mars-analogue glass-rich basalt simulant (66 wt% glass, 32 wt% olivine, 2 wt% chromite) in the presence of H2SO4 under hydrothermal conditions (approximately 200 degC). Smectites were analyzed by X-ray diffraction, Mossbauer spectroscopy, visible and near-infrared reflectance spectroscopy and electron microprobe to characterize mineralogy and chemical composition. Solution chemistry was determined by Inductively Coupled Plasma Mass Spectrometry. Basalt simulant suspensions in 11-42 mM H2SO4 were acidic with pH less than or equal to 2 at the beginning of incubation and varied from acidic (pH 1.8) to mildly alkaline (pH 8.4) at the end of incubation. Alteration of glass phase during reaction of the basalt simulant with H2SO4 led to formation of the dioctahedral smectite at final pH approximately 3 and trioctahedral smectite saponite at final pH approximately 4 and higher. Anhydrite and hematite formed in the final pH range from 1.8 to 8.4 while natroalunite was detected at pH 1.8. Hematite was precipitated as a result of oxidative dissolution of olivine present in Adirondack basalt simulant. Formation of secondary phases, including smectite, resulted in release of variable amounts of Si, Mg, Na and Ca while solubilization of Al and Fe was low. Comparison of mineralogical and solution chemistry data indicated that the type of smectite (i.e., dioctahedral vs trioctahedral) was likely controlled by Mg leaching from altering basalt and substantial Mg loss created favorable conditions for formation of dioctahedral smectite. We present a model for global-scale smectite formation on Mars via acid-sulfate conditions created by the volcanic outgassing of SO2 in the Noachian and early Hesperian.

Smectite↗

Asymmetric Early Crust-Building Magmatism on the Lunar Nearside Due to KREEP-Induced Melting Point Depression

The lunar magnesian-suite, or Mg-suite, is a series of ancient plutonic rocks from the lunar crust with ages and compositions indicating that they represent crust-building magmatism occurring immediately after the end of magma ocean crystallization. Samples of the Mg-suite were found at every Apollo landing site except 11 and ubiquitously have geochemical characteristics indicating the involvement of KREEP in their petrogenesis. This observation has led to the suggestion that the presence of the KREEP reservoir under the lunar nearside was responsible for this episode of crust building. The lack of any readily identifiable Mg-suite rocks in meteoritic regolith breccias sourced from outside the Procellarum KREEP Terrane (PKT) seemingly supports this interpretation.

Elardo, S. M.↗

Development and Flammability Testing of Magnesium Alloys for Space Applications

This project will be comparing the flammability of select lightweight Mg alloys for use in a simulated ISS environment. It will also be determining the factors that influence flammability of selected alloys in elevated oxygen, including the formation of an oxide layer. The significance of this work is that such alloys can reduce weight saving by up to 30%. This work is adding to knowledge base of lightweight Mg alloys for possible future applications, as no previous flammability testing of Mg alloys have been conducted at elevated oxygen concentrations.

International Space Station↗

Systems and Methods for Implementing Tailored Metallic Glass-Based Strain Wave Gears and Strain Wave Gear Components

Systems and methods in accordance with embodiments of the invention implement tailored metallic glass-based strain wave gears and strain wave gear components. In one embodiment, a method of fabricating a flexspline of a strain wave gear includes: forming a MG-based composition into a flexspline using one of a thermoplastic forming technique and a casting technique; where the forming of the MG-based composition results in a formed MG-based material; where the formed flexspline is characterized by: a minimum thickness of greater than approximately 1 mm and a major diameter of less than approximately 4 inches.

Hofmann, Douglas C.↗

Coordinated NanoSIMS and TEM Analysis of a Large 26Mg-Rich AGB Silicate from the Meteorite Hills 00426 CR2 Chondrite

Silicates are one of the most abundant presolar phases around evolved stars, in the inter-stellar medium (ISM), and in our Solar System. These grains afford the opportunity for O, Si, Mg, Fe, and Ca isotopic analyses to constrain stellar nucleosynthetic and mixing processes, and Galactic chemical evolution (GCE). While Mg and Fe isotopic studies have been successfully conducted on presolar silicates, isotopic analyses beyond O and Si are often hampered by the small grain sizes (average ~250 nm). This also makes coordinated mineral and chemical characterization challenging. These studies provide insight into the dust condensation conditions as well as subsequent alteration in the ISM and/or the Solar System. TEM studies of presolar silicates have shown that they are much more mineralogically and chemically diverse than other presolar phases [1 and references therein]. Large (>500nm) presolar silicate grains are rare, but they allow for detailed isotopic, mineral, and chemical characterization. We identified a large presolar silicate grain in the MET 00426 CR2 chondrite and report the O, Si, Mg, and Fe isotopic compositions and TEM study of this grain.

Nguyen, A. N.↗

Metallic Powder Core Tubular Wire (PCTW) Development for Additive Manufacturing

NASA Langley Research Center (LaRC) in Hampton, VA, and the Center for Welding, Joining, and Coating Research (CWJCR) in the Department of Metallurgical and Materials Engineering at the Colorado School of Mines (CSM) in Golden, CO, have collaborated for nearly fifteen years to develop metallic powder core tubular wire (PCTW) feedstock for additive manufacturing (AM) using electron beam deposition. The motivation for this development was to offset dealloying observed during deposition of titanium and aluminum alloy solid wire feedstock in the LaRC electron beam freeform fabrication (EBF3) system and to explore novel alloy compositions by tailoring the powder fill. EBF3 is a fusion-based AM process that is performed under vacuum and is consequently prone to vaporization loss of low vapor pressure alloying elements. Research spanning four graduate student research projects succeeded in developing the basic methodology to fabricate PCTW, the mass balance equations used to define the powder fill, microstructure control through particulate inoculation, and the feasibility of producing metal matrix composite materials. Metallic PCTW is comprised of a thin foil sheath wrapped around a powder blend. Fabrication of PCTW at CSM was accomplished using a tubular wire mill system to first bend a flat strip into a u-shaped cross section, deposit a powder fill, create a lap joint to seal the wire, and draw to final diameter. Powder management systems were developed to ensure uniform mixing of powder constituents and identify feed rates for optimum fill ratios. Processing parameters were successfully developed for titanium and aluminum alloy sheaths to account for material work hardening during drawing. Mass balance equations were developed to account for compositional contributions of the sheath and powder fill. PCTW composition can be adjusted through selection of the sheath or powder materials. PCTWs were successfully developed to offset Al loss in deposits of Ti-6-4 and Mg loss in Al 6061, resulting in deposits that were within the composition limits for each material. Ti-6-4 deposits were fabricated using PCTW comprised of commercially pure (CP) titanium sheath and a fill of pre-alloyed Ti-6-4 powder with additions of elemental Al and V powders. Additions of both elements were required to account for the CP Ti from the sheath, and Al was further enhanced to offset documented losses in EBF3 deposits. For Al 6061 deposits, composition was modulated through the choice of sheath material. The PCTW was made using an Al 5052 sheath to supplement Mg content and a fill composition of pre-alloyed 6061 powder with additions of Si and Cu.The slower solidification rate of the EBF3 process compared with laser powder bed fusion processes can lead to coarse-grained microstructures and mechanical property anisotropy. EBF3deposits of Ti-6-4 exhibited large epitaxially grown β grains, which result in degraded mechanical properties in the deposition direction. Microstructure refinement was achieved through a combination of electron beam modulation and the use of a PCTW designed for Ti-6-4 deposits and modified by the addition of powder made from Fe and B. Resulting deposits exhibited reductions in β grain size, α phase colony intercept length and lath width, and an increased volume fraction of β phase. The mechanism of microstructure refinement was related to precipitation of boride particles. Hardness testing confirmed that mechanical property anisotropy was reduced and an overall increase in hardness was achieved.Metal matrix composite (MMC) materials offer strength and stiffness benefits over unreinforced materials. Two methods were investigated using PCTW technology for producing Al 6061 basedMMC materials; the direct addition of SiC reinforcing particles and the in-situ generation of reinforcements through reaction synthesis of precursor powders. Al 6061 based MMCs reinforced with SiC exhibited particle clustering and formation of aluminum carbides during deposition. The application of a Ni coating to the SiC particles prior to incorporation into the powder fill eliminated aluminum carbide formation and aided particle distribution during deposition. Modulation of beam focus and power further reduced aluminum carbide formation and aided particle distribution. In reaction synthesis, precursor additions undergo an exothermic reaction during deposition to form new ceramic products, generally of finer scale than the initial precursor components. The product phases provide reinforcement in the MMC and act as nucleation sites during solidification, resulting in grain refinement, improved mechanical properties, and reduced susceptibility to solidification cracking. Higher tensile strength and stiffness were demonstrated in Al 6061 based MMCs with 2 vol% reinforcement. These combined research efforts demonstrate the potential of PCTW technology for customizing of alloy composition and achieving microstructure control. A manufacturing process for titanium- and aluminum-based PCTWs was developed based on iterative design, theoretical calculations, and empirical data. PCTW technology successfully mitigated Al loss from Ti-6-4 and Mg loss in Al 6061, resulted in grain refinement in Ti-6-4, and demonstrated fabrication of Al based MMCs

Marcia S Domack↗

Evaluations of Damaged High-Pressure Compressor Blades in Two Turbine Engines of NASA DC–8

A series of flights were performed by the NASA DC-8 for the FIREX-AQ missions to observe the effects of wildfires and agricultural fires on air quality and climate in selected locations of the United States. Borescope evaluations after these flights indicated accelerated damage had occurred over this flight series to the blades in the high pressure compressor section of all four CFM56-2C1 turbine engines. This erosion and impact damage appeared to vary in severity, and appeared most severe for engines 3 and 4 located on the right wing of the DC-8.Engine 3 had the most flight hours and cycles since last overhaul of 7,152 h and 2,502 cycles. Engine 4 had the lowest flight hours and cycles since last overhaul of 1,354 h and 369 cycles. For these reasons, three noticeably damaged blades were selected from the high pressure compressor for each of these two engines, and then evaluated at NASA GRC using optical and scanning electron microscopy. Engine 3 compressor blades had both erosion and impact damage that were observed and characterized. The erosion damage was associated with embedded particles 13 μm to 42 μm in sectioned width, composed of varied compositions ranging from SiO2 to SiO2 also containing Ca, Mg, and Al (CMAS). The impact damage was associated with the impacts of larger objects at least 650 μm to 850 μm in width, but only small fragments 5 μm to 15 μm in sectioned width were embedded in the impact surface, also composed of SiO2 to SiO2 containing Ca, Mg, and Al (CMAS). On the other hand, engine 4 blades had only impact damage that was observed and characterized. This impact damage was associated with impacts of objects at least 1,480 μm to 2,080μm in width. Small fragments 5 μm to 15 μm in sectioned width were embedded in the impact surface. For one impact, the fragments were again composed of SiO2 to SiO2 containing Ca, Mg, and Al (CMAS). For two other impacts, the fragments were often composed of Fe, and less frequently Cu.

turbine↗

First-results from the Perseverance SHERLOC Investigation: Aqueous Alteration Processes and Implications for Organic Geochemistry in Jezero Crater, Mars

The Perseverance rover landed in Jezero crater, a site selected to fulfill the Mars-2020 mission goals of characterizing the geology of habitable environments and searching for signs of life while collecting samples for return to Earth [1]. Jezero hosted an open-basin lake during the late Noachian/early Hesperian (~3.7 Ga) [1-2], has units associated with the largest carbonate deposit identified on Mars [3-4], and has a well-preserved delta with clay and carbonate-bearing sediments, well-suited to preservation of organics [1,3-4]. Investigating the nature of organics and aqueous environments within their geologic con-text allows us to understand important aqueous processes and determine habitability within Jezero crater. Previous in situ landed measurements of organics could not resolve their spatial and mineralogical con-text [5-6]. Although Martian meteorites lack geological context, the spatial distribution of organic compounds in Martian meteorites have allowed recognition of an association between aqueous processes and organics [7-8]. Here, we show for the first time in-situ associations between carbonate-forming ultramafic alteration process, later stage aqueous sulfate and perchlorate formation, and organics on the Martian surface. Methodology and geological context: We use the Perseverance rover’s SHERLOC instrument (Scanning Habitable Environments with Raman and Lumines-ence of Organics and Chemicals), a deep-ultraviolet fluorescence and Raman scattering spectrometer capable of mapping the organic and mineral composition with a spatial resolution of 100 μm resolution to report the presence of organics and aqueously formed minerals at Jezero crater [9]. These spectral detections were compared with co-located images obtained with the autofocus context imager (ACI) and the WATSON camera for textural analysis [9]. As of writing, the Per-severance rover has abraded five targets that were measured with the SHERLOC instrument. The five targets are located in two different orbitally-identified geological units within the floor of Jezero crater; the Crater Floor Fractured Rough unit (CF-Fr) and the Séítah region within the Crater Floor Fractured 1 unit (CF-F1) [10]. In orbital infrared spectroscopic data, the CF-Fr unit is associated with pyroxene spectral signatures and minor alteration, while the Séítah region is associated with olivine and minor Mg-rich carbonates and clays [3-4,10]. Carbonation of ultramafic protolith recorded within Jezero crater: All scans of abraded targets within the Séítah region reveal strong peaks at 1080–1090 cm−1 consistent with carbonate and peak singlets or doublets at 820–840 cm−1 attributed to olivine (Fig. 1), consistent with orbital infrared observations. Our detailed micron-scale petrographic and spectroscopic evidence shows that these carbonates formed through carbonation of an ultramafic protolith. The supporting observations include: (1) Carbonate cation compositions match those of olivine, suggesting mixed Fe- and Mg-olivine gave rise to mixed Fe- and Mg-carbonates, similar to observations of ultramafic systems on Earth and within Martian meteorites [3-4,7-8]. (2) The ob-served carbonates co-occur with hydrated materials, gypsum, and potentially aqueously-formed phases, amorphous silicates and phosphate. (3) The spectral and textural variation of olivine and carbonate dominated zones and olivine-carbonate mixtures within both primary grains and interstitial zones are expected for carbonated ultramafic protoliths. (4) These mineral associations and textures closely resemble those observed within the ALH84001 and Nakhlite meteorites attributed to olivine carbonation on Mars [6-7]. Taken together, micron-scale SHERLOC documentation of these phenomena bridge previous orbital and meteorite observations and demonstrate in-situ regionally extensive (~106 km2) ultramafic alteration resulting in geo-logical deposition of carbonates. Furthermore, we observe that olivine carbonation was involved in preserving and possibly synthesizing organics, which makes this environment potentially habitable, as previously suggested in [1,3-4] (Fig. 1). Late-stage aqueous perchlorate and sulfate in Jezero crater: An abrasion target within the CF-Fr unit contains combinations of high intensity 950-955 cm−1 peaks and minor 1090-1095 cm−1 and 1150-1155 cm−1 peaks that are spectral fits to anhydrous perchlorate (Fig. 1). Some spectra show a combination of 950-955 cm−1 peaks with equally strong 1010-1020 cm−1 peaks, low intensity broad features at 1120 cm−1, and occasional broad 3450 cm−1 hydration (-OH) features, indicating a mixture of Ca-sulfate and perchlorate that is minimally hydrated (Fig. 1). The detections of per-chlorates within Jezero crater differ from previous measurements (e.g. Phoenix lander, Curiosity rover, Tissint meteorite [7,11]) because they are observed to be intimately related to aqueous processes including sulfate formation, they present as a secondary white void-fill occurring within the interior of the rock, and they are found to likely be Na-perchlorate. implications for their formation: Three different types of organics embedded within three different lithologies were observed within the abraded targets. Organics associated with low intensity ~340 nm fluorescence were widespread within targets with no apparent association to particular minerals (Fig. 1). Organics associated with ~305 nm and ~275 nm fluorescence correlated with sulfates within the Bellegarde target in the CF-Fr unit, while organics associated with high intensity ~340 nm fluorescence correlated with carbonate, phosphate, and amorphous silicate mixtures within the Garde target in the Séítah region (Fig. 1). Although assignment of fluorescence signatures to specific organic compounds is not conclusive, ~340 nm fluorescence is generally more consistent with 2-ring aromatic organics, ~275 nm fluorescence is more consistent with 1-ring aromatic organics, and ~305 nm fluorescence can be created by either 2- or 1-ring aromatics [12]. These observations indicate that the strongest fluorescence signatures interpreted as organics were found in materials associated with aqueous processes, i.e. sulfate- and carbonate-bearing materials, suggesting both brines and ultramafic carbonation aqueous environments were capable of preserving organics on ancient Mars. In Martian meteorites, simple aromatic organics proposed to have been synthesized through aqueous processes can be found within minerals associated with olivine carbonation and in spatial association with perchlorate and sulfate materials [7-8], similar to SHERLOC observations. Hence, we advance an abiotic aqueous synthesis origin for the organics although we cannot rule out the presence of organics from meteoritic in-fall or putative organic biosignatures. Detailed analyses will be required upon return of these materials to Earth.

E L Scheller↗

Trace Element Partitioning in the Presence of Sulfur Under Reduced Conditions

Oxygen fugacity (fO2) plays an important role in thephysicochemical properties of that system because fO2 has asubstantial impact on the partitioning behavior between andsolubility of elements in various phases. The reduced nature ofMercury and the aubrite parent bodies (APB) have raised manyquestions regarding the geochemical behavior of typicallylithophile, heat-producing, and rare-earth elements (REE) inmagmas at low fO2. In fact, interpretations of magmaticprocesses on reduced rocky bodies are difficult at presentbecause of the small number of experimental studies relevant tothe extremely low fO2 and high sulfur content of Mercury andthe APB, and our only natural analogs are the highly reducedenstatite chondrites and aubrites [e.g., 1]. Preliminaryobservations suggest that major and minor elements exhibitdifferent geochemical affinities in highly reduced, S-richsystems compared to terrestrial rocks. The partitioning behavior of major, minor, and traceelements between silicate melt, sulfide melt, and metal underhighly reduced conditions will be determined in a suite of super-liquidus experiments at a range of pressures (1 bar to 4 GPa) atNASA Johnson Space Center (JSC). Based on previous studies,heat-producing elements U and Th become more chalcophile,while K becomes less chalcophile, with more reducingconditions [2]. The nominally lithophile elements Mg and Cabecoming more chalcophile and appear as minor elements in(Fe,Mg,Ca)-S with more reducing conditions [3]. Additionally, itappears that nominally siderophile elements become moresiderophile and chalcophile with more reducing conditions,although the partitioning behavior into Mg- and Ca-bearingsulfide melts, rather than FeS, is less understood. Current workis focused on investigating elements for which we currently haveMESSENGER data as well as a host of geochemically relevanttrace elements such as REE.

Brendan A Anzures↗

X-Ray Amorphous Sulfur-Bearing Phases in Sedimentary Rocks of Gale Crater, Mars

The Curiosity rover in Gale crater is investigating a mineral transition observed from orbit—an older “clay unit” to a younger “sulfate unit”—hypothesized to reflect the aridification of Mars' climate. Below this transition, the rover detected crystalline Ca-sulfates with minor Fe-sulfates but also found that some fraction of a rock's bulk SO 3 is often in the poorly constrained X-ray amorphous component. Here, we characterize the abundances and compositions of the X-ray amorphous sulfur-bearing phases in 19 drilled samples using a mass balance approach, and in a subset of 5 samples using evolved SO 2 gas measured using the SAM instrument. We find that ∼20–90 wt% of a sample's bulk SO 3 is in the X-ray amorphous state and that X-ray amorphous sulfur-bearing phase compositions are consistent with mixtures of Mg-S, Fe-S, and possibly Ca-S phases, likely sulfates or sulfites. These phases reside in the bedrock, perhaps as cementing agents deposited with detrital sediments or during early diagenesis, and in diagenetic alteration halos deposited after lithification during late diagenesis. The likely presence of highly soluble Mg-sulfates in the rocks suggests negligible fluid flow through the bedrock post-Mg-sulfate deposition. The X-ray amorphous sulfur-bearing phases probably became amorphous through dehydration in the current Martian atmosphere or inside the CheMin instrument. X-ray amorphous sulfur-bearing materials likely contribute to orbital spectral detections of sulfates, and so our results help form multiple hypotheses to be tested in the sulfate unit and are important for understanding the evolution of the Martian surface environment at Gale crater.

R. J. Smith↗

Arctic Biogeochemical and Optical Properties of Dissolved Organic Matter Across River to Sea Gradients

Arctic landscapes are warming and becoming wetter due to changes in precipitation and the timing of snowmelt which consequently alters seasonal runoff and river discharge patterns. These changes in hydrology lead to increased mobilization and transport of terrestrial dissolved organic matter (DOM) to Arctic coastal seas where significant impacts on biogeochemical cycling can occur. Here, we present measurements of dissolved organic carbon (DOC) and chromophoric DOM (CDOM) in the Yukon River-to-Bering Sea system and two river plumes on the Alaska North Slope which flow into the Beaufort Sea. Our sampling characterized optical and biogeochemical properties of DOM during high and low river discharge periods for the Yukon River-Bering Sea system. The average DOC concentration at the multiple Yukon River mouths ranged from a high of 10.36 mg C L-1 during the ascending limb of the 2019 freshet (late May), 6.4 mg C L-1 during the descending limb of the 2019 freshet (late June), and a low of 3.86 mg C L-1 during low river discharge in August 2018. CDOM absorption coefficient at 412 nm (aCDOM(412)) averaged 8.23 m-1, 5.07 m-1, and 1.9 m-1, respectively. Several approaches to model DOC concentration based on its relationship with CDOM properties demonstrated cross-system seasonal and spatial robustness for these Arctic coastal systems despite spanning an order of magnitude decrease in DOC concentration from the lower Yukon River to the Northern Bering Sea as well as the North Slope systems. “Snapshot” fluxes of DOC and CDOM across the Yukon River Delta to Norton Sound were calculated from our measurements and modeled water fluxes forced with upstream USGS river gauge data. Our findings suggest that during high river flow, DOM reaches the delta largely unaltered by inputs or physical and biogeochemical processing and that the transformations of Yukon River DOM largely occur in the plume. However, during low summer discharge, multiple processes including local precipitation events, microbial decomposition, photochemistry, and likely others can alter the DOM properties within the lower Yukon River and Delta prior to flowing into Norton Sound.

Arctic↗

Chromium on Mercury: New Results From the MESSENGER X-Ray Spectrometer and Implications for the Innermost Planet’s Geochemical Evolution

Mercury, the innermost planet, formed under highly reduced conditions, based mainly on surface Fe, S, and Si abundances determined from MESSENGER mission data. The minor element Cr may serve as an independent oxybarometer but only very limited Cr data have been previously reported for Mercury. We report Cr/Si abundances across Mercury's surface based on MESSENGER X-Ray Spectrometer data throughout the spacecraft's orbital mission. The heterogeneous Cr/Si ratio ranges from 3.6 × 10 -5 in the Caloris Basin to 0.0012 within the high-magnesium region, with an average southern hemisphere value of 0.0008 (corresponding to about 200 ppm Cr). Absolute Cr/Si values have systematic uncertainty of at least 30%, but relative variations are more robust. By combining experimental Cr partitioning data along with planetary differentiation modeling, we find that if Mercury formed with bulk chondritic Cr/Al, Cr must be present in the planet's core and differentiation must have occurred at log ƒO 2 in the range of IW-6.5 to IW-2.5 in the absence of sulfides in its interior and a range of IW-5.5 to IW-2 with an FeS layer at the core-mantle boundary. Models with large fractions of Mg-Ca-rich sulfides in Mercury's interior are more compatible with moderately reducing conditions (IW-5.5 to IW-4) owing to the instability of Mg-Ca-rich sulfides at elevated ƒO 2 . These results indicate that if Mercury differentiated at a log ƒO 2 lower than IW-5.5, the presence of sulfides whether in the form of a FeS layer at the top of the core or Mg-Ca-rich sulfides within the mantle would be unlikely.

Larry R. Nittler↗

Petrological Traverse of the Olivine Cumulate Séítah Formation at Jezero Crater, Mars: A Perspective From SuperCam Onboard Perseverance

Séítah is the stratigraphically lowest formation visited by Perseverance in the Jezero crater floor. We present the data obtained by SuperCam: texture by imagery, chemistry by Laser-Induced Breakdown Spectroscopy, and mineralogy by Supercam Visible and Infrared reflectance and Raman spectroscopy. The Séítah formation consists of igneous, weakly altered rocks dominated by millimeter-sized grains of olivine with the presence of low-Ca and high-Ca pyroxenes, and other primary minerals (e.g., plagioclase, Cr-Fe-Ti oxides, phosphates). Along a ∼140 m long section in Séítah, SuperCam analyses showed evidence of geochemical and mineralogical variations, from the contact with the overlying Máaz formation, going deeper in the formation. Bulk rock and olivine Mg#, grain size, olivine content increase gradually further from the contact. Along the section, olivine Mg# is not in equilibrium with the bulk rock Mg#, indicating local olivine accumulation. These observations are consistent with Séítah being the deep ultramafic member of a cumulate series derived from the fractional crystallization and slow cooling of the parent magma at depth. Possible magmatic processes and exhumation mechanisms of Séítah are discussed. Séítah rocks show some affinity with some rocks at Gusev crater, and with some Martian meteorites suggesting that such rocks are not rare on the surface of Mars. Séítah is part of the Nili Fossae regional olivine-carbonate unit observed from orbit. Future exploration of Perseverance on the rim and outside of the crater will help determine if the observations from the crater floor can be extrapolated to the whole unit or if this unit is composed of distinct sub-units with various origins.

Mars 2020↗

Thermodynamic Modeling of Calcium and Magnesium Partitioning Between Sulfide and Silicate and Implications for Mercury’s Differentiation

Mercury is the least oxidized terrestrial planet of the solar system and is enriched in sulfur, which may be saturated in its mantle, possibly forming Ca- and Mg-rich sulfides. Using literature experimental data, we developed a thermodynamic model for calcium and magnesium partitioning between sulfide and silicate melts to enhance our understanding of the chemical equilibria involved in Mercury’s mantle-crust differentiation. Our models show that temperature and carbon abundance in sulfide have a positive effect on Ca partitioning into sulfides, while pressure decreases it. In addition, carbon abundance and sulfur concentration in the silicate melt are the primary controls on Mg partitioning, both favoring Mg partitioning into sulfides. Our results will be used to better understand the abundance as well as presence of calcium and magnesium sulfides within Mercury’s mantle and crust.

Taylor McCombs↗

Fractionation of Iron and Titanium Isotopes By Ilmenite and the Isotopic Compositions of Lunar Magma Ocean Cumulates

Basaltic volcanism on the Moon produced low- and high-Ti mare basalt suites that are also distinct with respect to their iron, titanium, and magnesium iso- topic compositions. Here, the equilibrium fractionation of Fe and Ti isotopes between ilmenite and melt was experimentally investigated in order to evaluate the role of ilmenite in generating the isotopic compositional variability among the lunar mare basalts. Ilmenite crystallization experiments were conducted using two bulk compositions: an ilmenite-saturated basaltic andesite and an ilmenite-saturated Apollo 14 black glass, and the Fe and Ti isotopic compo- sitions of the experimental ilmenites and glass (quenched melt) were analyzed using solution MC-ICPMS after hand-picking. Additionally, Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements on synthetic ilmenite were conducted and compared to previous NRIXS measurements on synthetic lunar glasses in order to derive temperature-dependent equilibrium ilmenite-melt Fe isotopic fractionations. Experimentally determined ilmenite-melt fractionations were then incorporated into a lunar magma ocean crystallization model that tracks the major element and isotopic compositional evolution of lunar magma ocean cumulates and residual liquid. There is good agreement between the Fe equilibrium isotopic fractionation measured by NRIXS and the laboratory equili- bration experiments, and we find that the isotopic fractionation is sensitive to il- menite compositional differences (0 vs. 10% Fe3+). Further, the light Ti isotopic composition of ilmenite relative to the melt (∆49Ti ilmenite-melt = −0.09 ± 0.03h at 1100°C) is consistent with the higher coordination of Ti in ilmenite relative to melts and results of previous studies. The modeled Ti isotopic compositions for lunar magma ocean cumulates display Ti isotopic variability sufficient to explain the low- and high-Ti mare basalt sources. However, the difference in Fe isotopic composition between the low- and high-Ti mare basalts cannot be attributed solely to ilmenite fractionation. Instead, Fe isotopic fractionation by additional products of lunar magma ocean crystallization, such as clinopy- roxene, is required to generate the inferred Fe and Mg isotopic variability in the lunar mantle. Alternatively, the Fe and Mg isotopic compositions of the lunar mare basalts may indicate Fe-Mg interdiffusion has occurred in the Ti- rich component of the mare basalt source regions via reaction between ilmenite cumulates and the olivine- and pyroxene-rich lunar mantle.

Kelsey Prissel↗

Rapid transition from primary to secondary crust building on the Moon explained by mantle overturn

Geochronology indicates a rapid transition (tens of Myrs) from primary to secondary crust building on the Moon. The processes responsible for initiating secondary magmatism, however, remain in debate. Here we test the hypothesis that the earliest secondary crust (Mg-suite) formed as a direct consequence of density-driven mantle overturn, and advance 3D mantle convection models to quantify the resulting extent of lower mantle melting. Our modeling demonstrates that overturn of thin ilmenite-bearing cumulates ≤ 100 km triggers a rapid and short-lived episode of lower mantle melting which explains the key volume, geochronological, and spatial characteristics of early secondary crust building without contributions from other energy sources, namely KREEP (potassium, rare earth elements, phosphorus, radiogenic U, Th). Observations of globally distributed Mg-suite eliminate degree-1 overturn scenarios. We propose that gravitational instabilities in magma ocean cumulate piles are major driving forces for the onset of mantle convection and secondary crust building on differentiated bodies.

Moon↗

Stress corrosion of high strength aluminum alloys.

An investigation has been carried out to examine the relationship of the observed chemical and mechanical properties of Al-Cu and Al-Zn-Mg alloys to the stress corrosion mechanisms which dominate in each case. Two high purity alloys and analogous commercial alloys were selected. Fundamental differences between the behavior of Al-Cu and of Al-Zn-Mg alloys were observed. These differences in the corrosion behavior of the two types of alloys are augmented by substantial differences in their mechanical behavior. The relative cleavage energy of the grain boundaries is of particular importance.

Cocks, F. H.↗