SEARCH · Engineering Papers

Results for “Mesh”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Spatial adaption procedures on unstructured meshes for accurate unsteady aerodynamic flow computation

Spatial adaption procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaption procedures were developed and implemented within a two-dimensional unstructured-grid upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in high gradient regions of the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational cost. The paper gives a detailed description of the enrichment and coarsening procedures and presents comparisons with alternative results and experimental data to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady transonic results, obtained using spatial adaption for the NACA 0012 airfoil, are shown to be of high spatial accuracy, primarily in that the shock waves are very sharply captured. The results were obtained with a computational savings of a factor of approximately fifty-three for a steady case and as much as twenty-five for the unsteady cases.

Rausch, Russ D.↗

NASA NTRS1991

Implicit solvers for unstructured meshes

Implicit methods for unstructured mesh computations are developed and tested. The approximate system which arises from the Newton-linearization of the nonlinear evolution operator is solved by using the preconditioned generalized minimum residual technique. These different preconditioners are investigated: the incomplete LU factorization (ILU), block diagonal factorization, and the symmetric successive over-relaxation (SSOR). The preconditioners have been optimized to have good vectorization properties. The various methods are compared over a wide range of problems. Ordering of the unknowns, which affects the convergence of these sparse matrix iterative methods, is also investigated. Results are presented for inviscid and turbulent viscous calculations on single and multielement airfoil configurations using globally and adaptively generated meshes.

Venkatakrishnan, V.↗

NASA NTRS1991

A fast implicit upwind solution algorithm for three-dimensional unstructured dynamic meshes

A fast implicit upwind algorithm for the solution of the time-dependent Euler equations is presented for aerodynamic analysis involving unstructured dynamic meshes. The spatial discretization of the scheme is based on the upwind approach of Roe, referred to as flux-difference splitting (FDS). The FDS approach is naturally dissipative and captures shock waves and contact discontinuities sharply. The temporal discretization of the scheme involves an implicit time-integration using a two-sweep Gauss-Seidel relaxation procedure. The procedure is computationally efficient for either steady or unsteady flow problems. A detailed description is given of the implicit upwind solution algorithm along with results which assess the capability. The results are presented for the NACA 0012 airfoil and for the Boeing 747 aircraft. The 747 geometry includes the fuselage, wing, horizontal and vertical tails, under-wing pylons, and flow-through engine nacelles. Euler solutions for the 747 aircraft on an unstructured tetrahedral mesh containing approximately 100,000 cells were obtained to engineering accuracy in less than one hour CPU time on a Cray-2 computer.

Batina, John T.↗

NASA NTRS1991

A novel approach in formulation of special transition elements: Mesh interface elements

The objective of this research program is in the development of more accurate and efficient methods for solution of singular problems encountered in various branches of mechanics. The research program can be categorized under three levels. The first two levels involve the formulation of a new class of elements called 'mesh interface elements' (MIE) to connect meshes of traditional elements either in three dimensions or in three and two dimensions. The finite element formulations are based on boolean sum and blending operators. MEI are being formulated and tested in this research to account for the steep gradients encountered in aircraft and space structure applications. At present, the heat transfer and structural analysis problems are being formulated from uncoupled theory point of view. The status report: (1) summarizes formulation for heat transfer and structural analysis; (2) explains formulation of MEI; (3) examines computational efficiency; and (4) shows verification examples.

Sarigul, Nesrin↗

NASA NTRS1992

Contact stresses in meshing spur gear teeth: Use of an incremental finite element procedure

Contact stresses in meshing spur gear teeth are examined. The analysis is based upon an incremental finite element procedure that simultaneously determines the stresses in the contact region between the meshing teeth. The teeth themselves are modeled by two dimensional plain strain elements. Friction effects are included, with the friction forces assumed to obey Coulomb's law. The analysis assumes that the displacements are small and that the tooth materials are linearly elastic. The analysis procedure is validated by comparing its results with those for the classical two contacting semicylinders obtained from the Hertz method. Agreement is excellent.

Hsieh, Chih-Ming↗

NASA NTRS1992

Adaptive unstructured meshing for thermal stress analysis of built-up structures

An adaptive unstructured meshing technique for mechanical and thermal stress analysis of built-up structures has been developed. A triangular membrane finite element and a new plate bending element are evaluated on a panel with a circular cutout and a frame stiffened panel. The adaptive unstructured meshing technique, without a priori knowledge of the solution to the problem, generates clustered elements only where needed. An improved solution accuracy is obtained at a reduced problem size and analysis computational time as compared to the results produced by the standard finite element procedure.

Dechaumphai, Pramote↗

NASA NTRS1992

A fast implicit upwind solution algorithm for three-dimensional unstructured dynamic meshes

Batina, John T.↗

NASA NTRS1992

Adaptive unstructured meshing for thermal stress analysis of built-up structures

Dechaumphai, Pramote↗

NASA NTRS1979

A low-cost solar-cell front contact using trapped silver mesh and electrostatic bonding

A new system to provide a contact with a silver mesh trapped between the cell and an encapsulating glass cover is described. Borosilicate glass is joined to the cell by electrostatic bonding during which the glass is deformed around the silver mesh to form a permanent optically coupled integral bond to the cell. The hermetic seal prevents the silver from oxidizing and destroying the electrical contact formed during the bonding process. It is demonstrated that electrostatic glass/silicon bonds have excellent stability under a variety of accelerated environmental tests. Electrostatic bonds to thin films of AL2O3, Ta2O5, and ZrO2 on glass can be used to make antireflective coatings for solar cells manufactured by this process. Test solar cells were manufactured by electrostatic bonding with good curve fill factors and efficiencies of 10 percent.

Landis, Geoffrey A.↗

NASA NTRS1993

Spatial adaptation procedures on tetrahedral meshes for unsteady aerodynamic flow calculations

Spatial adaptation procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaptation procedures were developed and implemented within a three-dimensional, unstructured-grid, upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in high gradient regions of the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational cost. A detailed description of the enrichment and coarsening procedures are presented and comparisons with experimental data for an ONERA M6 wing and an exact solution for a shock-tube problem are presented to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady results, obtained using spatial adaptation procedures, are shown to be of high spatial accuracy, primarily in that discontinuities such as shock waves are captured very sharply.

Rausch, Russ D.↗

NASA NTRS1993

Isomorphic routing on a toroidal mesh

We study a routing problem that arises on SIMD parallel architectures whose communication network forms a toroidal mesh. We assume there exists a set of k message descriptors (xi, yi), where (xi, yi) indicates that the ith message's recipient is offset from its sender by xi hops in one mesh dimension, and yi hops in the other. Every processor has k messages to send, and all processors use the same set of message routing descriptors. The SIMD constraint implies that at any routing step, every processor is actively routing messages with the same descriptors as any other processor. We call this isomorphic routing. Our objective is to find the isomorphic routing schedule with least makespan. We consider a number of variations on the problem, yielding complexity results from O(k) to NP-complete. Most of our results follow after we transform the problem into a scheduling problem, where it is related to other well-known scheduling problems.

Mao, Weizhen↗

NASA NTRS1993

Spatial adaptation procedures on tetrahedral meshes for unsteady aerodynamic flow calculations

Spatial adaptation procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaptation procedures were developed and implemented within a three-dimensional, unstructured-grid, upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in high gradient regions of the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational cost. The paper gives a detailed description of the enrichment and coarsening procedures and presents comparisons with experimental data for an ONERA M6 wing and an exact solution for a shock-tube problem to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady results, obtained using spatial adaptation procedures, are shown to be of high spatial accuracy, primarily in that discontinuities such as shock waves are captured very sharply.

Rausch, Russ D.↗

NASA NTRS1993

Implicit upwind solution algorithms for three-dimensional unstructured meshes

The development of implicit upwind algorithms for the solution of the three-dimensional, time-dependent Euler equations on unstructured tetrahedral meshes is described. The implicit temporal discretization involves either a two-sweep Gauss-Seide relaxation procedure, a two-sweep Point-Jacobi relaxation procedure, or a single-sweep Point-Implicit procedure; the upwind spatial discretization is based on the flux-difference splitting of Roe. Detailed descriptions of the three implicit solution algorithms are given, and calculations for the Boeing 747 transport configuration are presented to demonstrate the algorithms. Advantages and disadvantages of the implicit algorithms are discussed. A steady-state solution for the 747 configuration, obtained at transonic flow conditions using a mesh of over 100,000 cells, required less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the general capability.

Batina, John T.↗

NASA NTRS1992

Coupling finite element and integral equation solutions using decoupled boundary meshes

A method is outlined for calculating scattered fields from inhomogeneous penetrable objects using a coupled finite element-integral equation solution. The finite element equation can efficiently model fields in penetrable and inhomogeneous regions, while the integral equation exactly models fields on the finite element mesh boundary and in the exterior region. By decoupling the interior finite element and exterior integral equation meshes, considerable flexibility is found in both the number of field expansion points as well as their density. Only the nonmetal portions of the object need be modeled using a finite element expansion; exterior perfect conducting surfaces are modeled using an integral equation with a single unknown field since E(tan) is identically zero on these surfaces. Numerical convergence, accuracy, and stability at interior resonant frequencies are studied in detail.

Cwik, Tom↗

NASA NTRS1993

Time-accurate simulation of a self-excited oscillatory supersonic external flow with a multi-block solution-adaptive mesh algorithm

Results are presented of an investigation of the time-accurate simulation of supersonic unsteady flow oscillations over spike-tipped bodies using the multistage Runge-Kutta scheme coupled with a dynamic solution-adaptive grid algorithm modified for multiblock capabilities. The inviscid fluxes are described by a modified advective upwind split method to obviate the need for artificial dissipation. If a time-varying, solution-adaptive mesh algorithm is incorporated, resolution of the details of the unsteady spike-tipped body flow is improved. The adaptive algorithm is also shown to resolve multiple and diverse features of the flow simultaneously, with the adapted regions in the mesh convecting with these features as they translate.

Ingram, Clint L.↗

NASA NTRS1993

Looking for O(N) Navier-Stokes solutions on non-structured meshes

Multigrid methods are good candidates for the resolution of the system arising in numerical fluid dynamics. However, the question is to know if those algorithms which are efficient for the Poisson equation on structured meshes will still apply well to the Euler and Navier-Stokes equations on unstructured meshes. The study of elliptic problems leads us to define the conditions where a full multigrid strategy has O(N) complexity. The aim of this paper is to build a comparison between the elliptic theory and practical CFD problems. First, as an introduction, we will recall some basic definitions and theorems applied to a model problem. The goal of this section is to point out the different properties that we need to produce an FMG algorithm with O(N) complexity. Then, we will show how we can apply this theory to the fluid dynamics equations such as Euler and Navier-Stokes equations. At last, we present some results which are 2nd-order accurate and some explanations about the behavior of the FMG process.

Morano, Eric↗

NASA NTRS1992

Multigrid solution of internal flows using unstructured solution adaptive meshes

This is the final report of the NASA Lewis SBIR Phase 2 Contract Number NAS3-25785, Multigrid Solution of Internal Flows Using Unstructured Solution Adaptive Meshes. The objective of this project, as described in the Statement of Work, is to develop and deliver to NASA a general three-dimensional Navier-Stokes code using unstructured solution-adaptive meshes for accuracy and multigrid techniques for convergence acceleration. The code will primarily be applied, but not necessarily limited, to high speed internal flows in turbomachinery.

Smith, Wayne A.↗

NASA NTRS1993

A new conformal absorbing boundary condition for finite element meshes and parallelization of FEMATS

Some of the progress toward the development and parallelization of an improved version of the finite element code FEMATS is described. This is a finite element code for computing the scattering by arbitrarily shaped three dimensional surfaces composite scatterers. The following tasks were worked on during the report period: (1) new absorbing boundary conditions (ABC's) for truncating the finite element mesh; (2) mixed mesh termination schemes; (3) hierarchical elements and multigridding; (4) parallelization; and (5) various modeling enhancements (antenna feeds, anisotropy, and higher order GIBC).

Chatterjee, A.↗