Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Membrane systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Direct Air Capture of CO2 (DAC) [Tech Snapshot]

Researchers at Los Alamos have extensive capabilities in design, testing and optimization of: (1) new capture materials based on membrane separation, amine and other solvent and sorbent separation, and porous materials; (2) biological capture methods, particularly algae and plants; (3) full-scale systems using science-based virtual learning; and (4) system performance under specific meteorological conditions, impacts of CO2 capture via atmospheric data and simulations, and availability of energy and storage capacity. The goal for Los Alamos is advancing our physical technologies and engineered systems approaches from the development phase to a minimal viable product in the energy sector for commercial purposes. Los Alamos is seeking strategic commercialization partners to work with us in advancing these capabilities and technologies for commercial viability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Electric Power Research Institute (EPRI) [Abstract]

Carbon dioxide (CO 2 ) capture from flue gas generated by fossil fuel-fired power plants has been proposed as an efficient approach to limit CO 2 emissions to the atmosphere. Due to the high cyclic CO 2 sorption capacity, well-tuned adsorption chemistry and non-volatility, solid sorbents are widely studied for CO 2 capture processes such as pressure swing adsorption (PSA) and temperature swing adsorption (TSA). Realistic applications of traditional solid sorbent systems face many challenges since moisture and heat management are problematic and solid-solid heat exchange is inefficient. Recently, a novel solid sorbent system, the sorbent polymer composite (SPC), has been developed to overcome those challenges in an energy-saving CO 2 capture process using TSA membrane contactors. A SPC material is comprised of a powdered solid sorbent embedded into a hydrophobic and porous polymer matrix. It allows gases to permeate through and achieve full contact with the sorbents while rejecting water moisture in the CO 2 capture process. In this collaborative research, NETL will conduct performance testing of a novel SPC material and EPRI will conduct a cost analysis based on that performance data.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Integrated Technology for Cost-Effective CO2 Capture and Formic Acid Production: Modeling, Optimization, and Economic Analysis

A novel reactive technology is being investigated that electrochemically converts CO2 into valuable chemicals, particularly formic acid. This work focuses on identifying the optimal design and operation of an integrated membrane-based CO2 capture unit with the electrochemical conversion process. In this setup, the CO2 in the flue gas permeates through a CO2-selective membrane and enters an electrolyzer to produce formic acid, creating an integrated reaction module. To refine the chemical product, gas products from the electrolyzer are directed to a pressure swing adsorption unit, while the liquid product undergoes refinement to achieve commercial-grade formic acid using reactive distillation. A membrane CO2 capture model and an electrochemical conversion model have been developed using the IDAES Integrated Platform (Institute for the Design of Advanced Energy System), facilitating rigorous flowsheet modeling and process design and optimization.

Wang, Maojian↗
DOE OSTI2022

Antimicrobial Peptide Mimics for Clinical Use: Does Size Matter?

The search for efficient antimicrobial therapies that can alleviate suffering caused by infections from resistant bacteria is more urgent than ever before. Infections caused by multi-resistant pathogens represent a significant and increasing burden to healthcare and society and researcher are investigating new classes of bioactive compounds to slow down this development. Antimicrobial peptides from the innate immune system represent one promising class that offers a potential solution to the antibiotic resistance problem due to their mode of action on the microbial membranes. However, challenges associated with pharmacokinetics, bioavailability and off-target toxicity are slowing down the advancement and use of innate defensive peptides. Improving the therapeutic properties of these peptides is a strategy for reducing the clinical limitations and synthetic mimics of antimicrobial peptides are emerging as a promising class of molecules for a variety of antimicrobial applications. These compounds can be made significantly shorter while maintaining, or even improving antimicrobial properties, and several downsized synthetic mimics are now in clinical development for a range of infectious diseases. A variety of strategies can be employed to prepare these small compounds and this review describes the different compounds developed to date by adhering to a minimum pharmacophore based on an amphiphilic balance between cationic charge and hydrophobicity. These compounds can be made as small as dipeptides, circumventing the need for large compounds with elaborate three-dimensional structures to generate simplified and potent antimicrobial mimics for a range of medical applications. This review highlights key and recent development in the field of small antimicrobial peptide mimics as a promising class of antimicrobials, illustrating just how small you can go.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

System and method of mapping topology

A system for determining a fingerprint of a structure is provided. The system includes a plurality of granules inserted in a structure having a plurality of fissures, fractures, and cracks (collectively apertures), each granule comprising a membrane, and at least one bubble of compressed gas formed in the membrane, the membrane selectively dissolving in presence of a predetermined fluid and thereby selectively bursting the at least one bubble, thereby generating a concussing vibration, at least at least i) three detection devices for two-dimensional mapping or ii) four detection devices for three-dimensional mapping placed proximate to the structure according to a predetermined placement schedule, and a computing device comprising a processor configured to receive data from the at least three or four detection devices and to determine location of the at least one bubble of each of the plurality of the granules at the time of bursting by triangulating the concussive vibration in order to determine location of the at least one bubble.

Pyrak-Nolte, Laura↗
DOE OSTI2022

Microfluidic aspirator and multi-purpose flow sensor and methods of making and using the same

Devices that include a liquid chamber including at least two ports, wherein the opening of a first port is larger than the opening of a second port, an air chamber including at least one port, and a membrane located between the liquid chamber and the air chamber, and a pressure sensor coupled to the port in the air chamber are provided. Systems including the disclosed devices are also provided. The systems include liquid in the liquid chamber of the device. Methods of using the devices and systems include measuring one or more properties of a liquid by flowing the liquid through the liquid chamber of the system and measuring the pressure produced due to the difference in size of the ports in the liquid chamber.

42 ENGINEERING↗
DOE OSTI2023

Methods of recovering an elemental rare earth metal, and methods of forming a rare earth metal

A method of recovering an elemental rare earth metal comprises placing a rare earth-containing material comprising a rare earth metal in a reaction solution comprising a reducing agent and a non-aqueous solvent comprising an ionic liquid or a eutectic mixture, reducing the rare earth metal with the reducing agent to form a metallic rare earth metal and cations of the reducing agent, transferring the cations of the reducing agent from the reaction solution to an electrochemical cell through an ion exchange membrane, and reducing the cations of the reducing agent in the electrochemical cell. Related methods of forming an elemental rare earth metal, and related systems are disclosed.

Case, Mary E.↗
DOE OSTI2023

Dissolved gas recovery from water using a sidestream hollow-fiber membrane module: First principles model synthesis and steady-state validation

This paper presents a first-principles model for the recovery of dissolved gases from liquids using a sidestream hollow-fiber membrane module. The model avoids the use of new empirical coefficients, thus providing a parametric understanding of the process behavior for future design and optimization of membrane modules. This type of first-principles model could be particularly useful when gas recovery is beneficial to biological or chemical reactions of interest, such as the acetogenesis reactions in two-stage anaerobic digesters. The steady-state behavior of the model was validated against both new experimental data for the recovery of H 2 , CH 4 and H 2 –CH 4 mixtures from pure water, as well as existing published data. The modeled gas recovery predictions agreed with experimental data to an absolute average error of 13%, and an average R value of 0.98. Parametric analysis of mixed-gas recovery suggests possible key transition points in the composition of the recovered gases. For example, at 40 °C, increasing trans-membrane pressure while keeping hydraulic residence time (HRT) under 0.5 s will result in an increase in the ratio of H 2 to CH 4 recovered. Otherwise, increasing trans-membrane pressure will instead decrease the ratio of H 2 to CH 4 recovered. The model has potential to be extended to transient analysis, but has yet to be validated with transient experimental data. Furthermore, this model was successfully implemented in both Python and MATLAB, and provides valuable insights for future net-energy optimization for anaerobic digestion systems with in-situ gas recovery.

Anaerobic Digestion↗
DOE OSTI2021

Methods and systems for the electrochemical reduction of carbon dioxide using switchable polarity materials

A method of electrochemically reducing CO2 comprises introducing a first feed stream comprising H2O to a positive electrode of an electrolysis cell comprising the positive electrode, a negative electrode, and a proton conducting membrane. A second feed stream comprising a solvent and a non polar form of a switchable polarity material is directed into a CO2 capture apparatus. A third feed stream comprising CO2 is directed into the CO2 capture apparatus to interact with the second feed stream and form a first product stream comprising the solvent and a polar form of the switchable polarity material. The first product stream is introduced to the negative electrode. A potential difference is applied between the positive electrode and the negative electrode to convert the polar form of the switchable polarity material into CO2 and the non-polar form and to form products from the CO2 and the solvent. A CO2 treatment system is also described.

Lister, Tedd E.↗
DOE OSTI2020

Fabrication of OMT-Coupled Kinetic Inductance Detector for CMB Detection

Future cosmic microwave background (CMB) experiments, including the large scale ground-based Stage Four CMB Experiment (CMB-S4), satellites, and balloons, aim to map the CMB to an unprecedented precision in order to answer several key questions in cosmology. However, to reach the target noise sensitivity, more than 100,000 detectors will be needed. Arrays of kinetic inductance detectors (KIDs) are a promising alternative for experiments that require large number of detectors due to the intrinsic multiplexing capabilities. We present the fabrication procedure for a prototype planar orthomode transducer (OMT)-coupled multi-color KID array optimized for 220/270 GHz frequency bands. These devices are made from silicon-on-insulator wafers to provide a low-loss substrate for the KIDs. The OMT couples the two polarizations of light from a wide-band feedhorn to separate Nb/SiN/Nb microstrip lines, which are then coupled to Al/Nb lumped-element KIDs (LEKIDs). The silicon on the backside of the OMT is etched away using deep reactive ion etch to release the OMT membrane to enable operation over a wide bandwidth. Finally, the buried oxide is removed underneath the KID capacitors in order to minimize two-level system noise and loss mitigation. We achieved a good yield (> 80%) on our prototype devices.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Review of liquid desiccant air dehumidification systems coupled with heat pump: System configurations, component design, and performance

Vapor Compression Systems (VCS) are the most common air conditioning technology. VCS cool the air to its dew point temperature (overcooling) to remove water vapor in the air through condensation and then reheats the air back to the comfort temperature for direct use. The VCS process is inefficient due to overcooling and reheating. Liquid Desiccant Dehumidification (LDD) is a potentially energy-efficient air conditioning. LDD removes water vapor in the process air using liquid desiccant’s high-water affinity. It hybrids with sensible cooling to control temperature and humidity separately. The LD in the LDD becomes weak after dehumidification. The LDD needs additional heating to regenerate the weak Liquid Desiccant (LD) to a high concentration for dehumidification. Earlier versions of the LDD systems use highly concentrated liquid desiccant (large water removal capability) to dehumidify the air by only dealing with latent load. It leads to highly elevated temperatures above 60 °C of heat sources (combustion or electric resistance-based heating) for regeneration. The energy needed for the elevated temperature heat resource significantly reduces or demolishes the benefit of LDD systems. In the recent two decades, researchers have investigated a new configured LDD system that couples an LDD with a heat pump at both dehumidification and regeneration sides for better efficiency. The heat pump provides cooling (from the evaporator) for both dehumidification and sensible cooling and simultaneous heating from the condenser for regeneration. The highly integrated system (HP-LDD) with improved efficiency enables the LDD to operate at lower concentrations and temperatures in dehumidification and regeneration. This paper depicts the working principle behind HP-LDD and its heating and cooling requirements. It reviews the comparison between the HP-LDD systems and the conventional LDD systems regarding system configurations, component design, energy efficiency, and dehumidification performance characteristics. The main findings from the review include the preferred use of packed bed over membrane-based dehumidifiers, the use of internally cooled dehumidifiers enabled by the HP cooling capacity, the high dispersion of HP operation conditions, and the dependence of dehumidification performance on various dehumidifiers. Finally, an outlook for future research on HP-LDD strategies is presented based on the reviewed works and their limitations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

The Buckling Spectra of Nanoparticle Surfactant Assemblies

Fine control over the mechanical properties of thin sheets underpins transcytosis, cell shape, and morphogenesis. Applying these principles to artificial, liquid-based systems has led to reconfigurable materials for soft robotics, actuation, and chemical synthesis. However, progress is limited by a lack of synthetic two-dimensional membranes that exhibit tunable mechanical properties over a comparable range to that seen in nature. In this study, we show that the bending modulus, B , of thin assemblies of nanoparticle surfactants (NPSs) at the oil–water interface can be varied continuously from sub- k B T to 10 6 k B T , by varying the ligands and particles that comprise the NPS. We find extensive departure from continuum behavior, including enormous mechanical anisotropy and a power law relation between B and the buckling spectrum width. Our findings provide a platform for shape-changing liquid devices and motivate new theories for the description of thin-film wrinkling.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Enhanced polarization and abnormal flexural deformation in bent freestanding perovskite oxides

Abstract Recent realizations of ultrathin freestanding perovskite oxides offer a unique platform to probe novel properties in two-dimensional oxides. Here, we observe a giant flexoelectric response in freestanding BiFeO 3 and SrTiO 3 in their bent state arising from strain gradients up to 3.5 × 10 7 m −1 , suggesting a promising approach for realizing ultra-large polarizations. Additionally, a substantial change in membrane thickness is discovered in bent freestanding BiFeO 3 , which implies an unusual bending-expansion/shrinkage effect in the ferroelectric membrane that has never been seen before in crystalline materials. Our theoretical model reveals that this unprecedented flexural deformation within the membrane is attributable to a flexoelectricity–piezoelectricity interplay. The finding unveils intriguing nanoscale electromechanical properties and provides guidance for their practical applications in flexible nanoelectromechanical systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

A glossary of plant cell structures: Current insights and future questions

Abstract In this glossary of plant cell structures, we asked experts to summarize a present-day view of plant organelles and structures, including a discussion of outstanding questions. In the following short reviews, the authors discuss the complexities of the plant cell endomembrane system, exciting connections between organelles, novel insights into peroxisome structure and function, dynamics of mitochondria, and the mysteries that need to be unlocked from the plant cell wall. These discussions are focused through a lens of new microscopy techniques. Advanced imaging has uncovered unexpected shapes, dynamics, and intricate membrane formations. With a continued focus in the next decade, these imaging modalities coupled with functional studies are sure to begin to unravel mysteries of the plant cell.

Biochemistry & Molecular Biology↗
DOE OSTI2025

Holistic Microstructure Control Strategies in Photopolymerization‐Induced Phase Separation of Acrylate Systems

Open porous materials, known for their large surface area and interconnected structures, are essential in various applications, including batteries, ion exchange, catalysis, filtration, and electronic waste recycling. A critical aspect of the functionality of porous membranes is the precise control of pore size and morphology. Photopolymerization-induced phase separation (photo-PIPS) offers a convenient and versatile methods for creating porous structures. However, controlling the porous morphology remains challenging due to the complex interplay between thermodynamics, polymerization kinetics, and monomer structures, which makes it difficult to establish the relationship between processing conditions and resulting morphology in photo-PIPS. Herein, a physics-based phase-field model capable of generating and characterizing the microstructures of porous materials based on both average and localized features is developed. Using the phase-field simulations as test bed, the effects of polarity, light intensity, and curing temperature, as well as the previously unexplored roles of chain transfer agents and substrates, on the morphology of the resulting porous microstructure are investigated. Experiments are performed to verify the results predicted by the simulations. This work lays out a comprehensive guide for designing PIPS-derived porous microstructures and offers practical engineering strategies for tailoring microstructure-level topology and size of pores for application-specific needs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Generating forces in confinement via polymerization

Understanding how to produce forces using biomolecular building blocks is essential for the development of adaptive synthetic cells and living materials. Here we ask whether a dynamic polymer system can generate deformation forces in soft shells by pure self-assembly, motivated by the fact that biological polymer networks like the cytoskeleton can exert forces, move objects, and deform membranes by simply growing, even in the absence of molecular motors. We address this question by investigating polymer force generation by varying the release rate, the structure, and the interactions of self-assembling monomers. First, we develop a toy computational model of polymerization in a soft elastic shell that reveals the emergence of spontaneous bundling which enhances shell deformation. We then extend our model to account more explicitly for monomer binding dynamics. We find that the rate at which monomers are released into the interior of the shell is a crucial parameter for achieving deformation through polymer growth. Lastly, we demonstrate that the introduction of multivalent particles that can join polymers can either improve or impede polymer performance, depending on the amount and on the structure of the multivalent particles. Our results provide guidance for the experimental realization of polymer systems that can perform work at the nanoscale, for example through rationally designed self-assembling proteins or nucleic acids.

Osmanović, Dino [University of California at Los A↗
DOE OSTI2025

Dilute Regeneration-Driven Membrane Capacitive Deionization of Synthetic Seawater Using Nanopatterned Membranes and Prussian Blue Analog Electrodes

Membrane capacitive deionization (MCDI) offers energy-efficient seawater desalination but is limited at high salinity by membrane resistance and incomplete electrode regeneration. Nanopatterned ion-exchange membranes, dilute regeneration protocols, and Prussian blue analog (PBA)-functionalized electrodes are combined in a flow-by-MCDI cell. Nanopatterned ion-exchange membranes (hexagonal, octagonal, double-ring, rectangular) enhance interfacial ion transport, with hexagonal geometry delivering ≈12.5% greater surface area and the best performance. PBA-functionalized electrodes increase salt adsorption and charge-transfer kinetic rates. The integrated system lowers the area-specific resistance by 45 Ω cm2, resulting in a 500 mV reduction in the cell voltage for a current density of 2 mA cm−2 for a 35 000 ppm NaCl feed. This improves the energy-normalized salt adsorption six fold (64–382 mmol J−1). Low salinity (2000 ppm) and mixed-salt regeneration sustains a ≈39% water recovery and stable performance for at least seven cycles. Overall, combining nanopatterned membranes, which promote confinement-enhanced ion mobility, and PBA electrodes, which enhance salt adsorption, improved the energy efficiency of MCDI.

Hasan, Mahmudul↗