Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MASS NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Evaluation of Alternative Altitude Scaling Methods for Thermal Ice Protection System in NASA Icing Research Tunnel

A test was conducted at NASA Icing Research Tunnel to evaluate altitude scaling methods for thermal ice protection system. Two scaling methods based on Weber number were compared against a method based on the Reynolds number. The results generally agreed with the previous set of tests conducted in NRCC Altitude Icing Wind Tunnel. The Weber number based scaling methods resulted in smaller runback ice mass than the Reynolds number based scaling method. The ice accretions from the Weber number based scaling method also formed farther upstream. However there were large differences in the accreted ice mass between the two Weber number based scaling methods. The difference became greater when the speed was increased. This indicated that there may be some Reynolds number effects that isnt fully accounted for and warrants further study.

thermal scaling↗

Diffusion-driven Fluid Dynamics in Ideal Gases and Plasmas

The classical transport theory based on Chapman-Enskog methods provides self-consistent approximations for the kinetic flux of mass, heat, and momentum in a fluid limit characterized with a small Knudsen number. The species mass fluxes relative to the center of mass, or “diffusive fluxes,” are expressed as functions of known gradient quantities with kinetic coefficients evaluated using similar analyses for mixtures of gases or plasma components. The sum over species of the diffusive mass fluxes is constrained to be zero in the Lagrange frame, and thus results in a non-zero molar flux leading to a pressure perturbation. At an interface between two species initially in pressure equilibrium, the pressure perturbation driven by the diffusive molar flux induces a center of mass velocity directed from the species of greater atomic mass towards the lighter atomic mass species. As the ratio of the species particle masses increases, this center of mass velocity carries an increasingly greater portion of the mass across the interface and for a particle mass ratio greater than about two, the center of mass velocity carries more mass than the gradient driven diffusion flux. Early time transients across an interface between two species in a 1D plasma regime and initially in equilibrium are compared using three methods; a fluid code with closure in a classical transport approximation, a particle in cell simulation, and an implicit Fokker-Planck solver for the particle distribution functions. The early time transient phenomenology is shown to be similar in each of the computational simulation methods, including a pressure perturbation associated with the stationary “induced” component of the center of mass velocity which decays to pressure equilibrium during diffusion. At early times, the diffusive process generates pressure and velocity waves which propagate outward from the interface and are required to maintain momentum conservation. The energy in the outgoing waves dissipates as heat in viscous regions, and it is hypothesized that these diffusion driven waves may sustain fluctuations in less viscid finite domains after reflections from the boundaries. Finally, these fluid dynamic phenomena are similar in gases or plasmas and occur in flow transients with a moderate Knudsen number. The analysis and simulation results show how the kinetic flux, represented in the fluid transport closure, directly modifies the mass averaged flow described with the Euler equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of a Laminate Flat Plate Diffusion Flame in Microgravity using PIV, Visible and CH Emissions

Motivated by fire safety concerns and the advent of long-term micro-gravity facilities, a cooperative program has been developed to study the mechanisms and material properties that control flow assisted (co-current) flame spread. This program has used as a common fire scenario a reacting steady-state boundary layer. Preliminary studies explored the aerodynamics of a reacting boundary layer by simulating a condensed fuel by means of a gas burner. Stability curves for ethane air flames were obtained and different burning regimes were identified. An important feature of this study was the independent identification of the different mechanisms leading to the instability of the flow. It was observed that fuel injection velocity and thermal expansion independently contributed to the separation of the flow at the leading edge of the burner. The occurrence of separation resulted in complex three-dimensional flow patterns that have a dominant effect on critical fire safety parameters such as the stand-off distance and flame length. This work was extended to a solid fuel (PMMA) leading to a Sounding Rocket experiment (Mini-Texus-6). The solid phase showed similar flow patterns, mostly present at low flow velocities (<100 mm/s) but the results clearly demonstrated that the thermal balance at the pyrolyzing fuel surface is the dominant mechanism that controls both stand-off distance and flame length. This thermal balance could be described in a global manner by means of a total mass transfer or "B" number. This "B" number incorporates surface re-radiation, radiative feedback and in-depth heat conduction as first prescribed by Emmons. The mass transfer number becomes the single parameter that determines the evolution of these fire safety variables (flame length, stand-off distance) and therefore can be used as a ranking criterion to assess the flammability of materials. The particular configuration is representative of the NASA upward flame spread test (Test 1) therefore this approach can be used in the interpretation of the results obtained from this test. Nevertheless, complete validation of this approach has not been fully achieved due, mainly because all the measurements necessary to compare with the theoretical predictions have not been obtained. Following these studies two different directions have been taken. The first attempts to elucidate the details of the gas phase combustion reaction and the associated flow field by means of quantitative and qualitative measurements. The second approach, a more practical one, is to apply this methodology to the assessment of material flammability. The former is currently being conducted with a gas burner because it allows for easier control and longer experimentation time. The results obtained so far will be presented in more detail. The latter is a new program therefore only a brief summary of the objectives will be presented.

Joulain, P.↗

On the abundance of extreme voids II: a survey of void mass functions

The abundance of cosmic voids can be described by an analogue of halo mass functions for galaxy clusters. In this work, we explore a number of void mass functions: from those based on excursion-set theory to new mass functions obtained by modifying halo mass functions. We show how different void mass functions vary in their predictions for the largest void expected in an observational volume, and compare those predictions to observational data. Our extreme-value formalism is shown to be a new practical tool for testing void theories against simulation and observation.

79 ASTRONOMY AND ASTROPHYSICS↗

Methods of Attenuation Correction for Dual-Wavelength and Dual-Polarization Weather Radar Data

In writing the integral equations for the median mass diameter and number concentration, or comparable parameters of the raindrop size distribution, it is apparent that the forms of the equations for dual-polarization and dual-wavelength radar data are identical when attenuation effects are included. The differential backscattering and extinction coefficients appear in both sets of equations: for the dual-polarization equations, the differences are taken with respect to polarization at a fixed frequency while for the dual-wavelength equations, the differences are taken with respect to frequency at a fixed polarization. An alternative to the integral equation formulation is that based on the k-Z (attenuation coefficient-radar reflectivity factor) parameterization. This-technique was originally developed for attenuating single-wavelength radars, a variation of which has been applied to the TRMM Precipitation Radar data (PR). Extensions of this method have also been applied to dual-polarization data. In fact, it is not difficult to show that nearly identical equations are applicable as well to dualwavelength radar data. In this case, the equations for median mass diameter and number concentration take the form of coupled, but non-integral equations. Differences between this and the integral equation formulation are a consequence of the different ways in which attenuation correction is performed under the two formulations. For both techniques, the equations can be solved either forward from the radar outward or backward from the final range gate toward the radar. Although the forward-going solutions tend to be unstable as the attenuation out to the range of interest becomes large in some sense, an independent estimate of path attenuation is not required. This is analogous to the case of an attenuating single-wavelength radar where the forward solution to the Hitschfeld-Bordan equation becomes unstable as the attenuation increases. To circumvent this problem, the equations can be expressed in the form of a final-value problem so that the recursion begins at the far range gate and proceeds inward towards the radar. Solving the problem in this way traditionally requires estimates of path attenuation to the final gate: in the case of orthogonal linear polarizations, the attenuations at horizontal and vertical polarizations (same frequency) are required while in the dual-wavelength case, attenuations at the two frequencies (same polarization) are required.

Meneghini, R.↗

Large-N solution of the heterotic CP(N-1) model with twisted masses

We address a number of unanswered questions in the N=(0,2)-deformed CP(N-1) model with twisted masses. In particular, we complete the program of solving the CP(N-1) model with twisted masses in the large-N limit. In A. Gorsky, M. Shifman, and A. Yung, Phys. Rev. D 73, 065011 (2006), a nonsupersymmetric version of the model with the Z{sub N} symmetric twisted masses was analyzed in the framework of Witten's method. In M. Shifman and A. Yung, Phys. Rev. D 77, 125017 (2008), this analysis was extended: the large-N solution of the heterotic N=(0,2) CP(N-1) model with no twisted masses was found. Here we solve this model with the twisted masses switched on. Dynamical scenarios at large and small m are studied (m is the twisted-mass scale). We found three distinct phases and two phase transitions on the m plane. Two phases with the spontaneously broken Z{sub N} symmetry are separated by a phase with unbroken Z{sub N}. This latter phase is characterized by a unique vacuum and confinement of all U(1) charged fields (''quarks''). In the broken phases (one of them is at strong coupling) there are N degenerate vacua and no confinement, similarly to the situation in the N=(2,2) model. Supersymmetry is spontaneously broken everywhere except a circle |m|={Lambda} in the Z{sub N}-unbroken phase. Related issues are considered. In particular, we discuss the mirror representation for the heterotic model in a certain limiting case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using System Mass (SM), Equivalent Mass (EM), Equivalent System Mass (ESM) or Life Cycle Mass (LCM) in Advanced Life Support (ALS) Reporting

The Advanced Life Support (ALS) has used a single number, Equivalent System Mass (ESM), for both reporting progress and technology selection. ESM is the launch mass required to provide a space system. ESM indicates launch cost. ESM alone is inadequate for technology selection, which should include other metrics such as Technology Readiness Level (TRL) and Life Cycle Cost (LCC) and also consider perfom.arxe 2nd risk. ESM has proven difficult to implement as a reporting metric, partly because it includes non-mass technology selection factors. Since it will not be used exclusively for technology selection, a new reporting metric can be made easier to compute and explain. Systems design trades-off performance, cost, and risk, but a risk weighted cost/benefit metric would be too complex to report. Since life support has fixed requirements, different systems usually have roughly equal performance. Risk is important since failure can harm the crew, but it is difficult to treat simply. Cost is not easy to estimate, but preliminary space system cost estimates are usually based on mass, which is better estimated than cost. Amass-based cost estimate, similar to ESM, would be a good single reporting metric. The paper defines and compares four mass-based cost estimates, Equivalent Mass (EM), Equivalent System Mass (ESM), Life Cycle Mass (LCM), and System Mass (SM). EM is traditional in life support and includes mass, volume, power, cooling and logistics. ESM is the specifically defined ALS metric, which adds crew time and possibly other cost factors to EM. LCM is a new metric, a mass-based estimate of LCC measured in mass units. SM includes only the factors of EM that are originally measured in mass, the hardware and logistics mass. All four mass-based metrics usually give similar comparisons. SM is by far the simplest to compute and easiest to explain.

Jones, Harry↗

SU-E-J-163: A Biomechanical Lung Model for Respiratory Motion Study

Purpose: This work presents a biomechanical model to investigate the complex respiratory motion for the lung tumor tracking in radiosurgery by computer simulation. Methods: The models include networked massspring-dampers to describe the tumor motion, different types of surrogate signals, and the force generated by the diaphragm. Each mass-springdamper has the same mechanical structure and each model can have different numbers of mass-spring-dampers. Both linear and nonlinear stiffness parameters were considered, and the damping ratio was tuned in a range so that the tumor motion was over-damped (no natural tumor oscillation occurs without force from the diaphragm). The simulation was run by using ODE45 (ordinary differential equations by Runge-Kutta method) in MATLAB, and all time courses of motions and inputs (force) were generated and compared. Results: The curvature of the motion time courses around their peaks was sensitive to the damping ratio. Therefore, the damping ratio can be determined based on the clinical data of a high sampling rate. The peak values of different signals and the time the peaks occurred were compared, and it was found that the diaphragm force had a time lead over the tumor motion, and the lead time (0.1–0.4 seconds) depended on the distance between the tumor and the diaphragm. Conclusion: We reported a model based analysis approach for the spatial and temporal relation between the motion of the lung tumor and the surrogate signals. Due to the phase lead of the diaphragm in comparing with the lung tumor motion, the measurement of diaphragm motion (or its electromyography signal) can be used as a beam gating signal in radiosurgery, and it can also be an additional surrogate signal for better tumor motion tracking. The research is funded by the American Cancer Society (ACS) grant. The grant name is: Frameless SRS Based on Robotic Head Motion Cancellation. The grant number is: RSG-13-313-01-CCE.

60 APPLIED LIFE SCIENCES↗

The connection between the host halo and the satellite galaxies of the Milky Way

Many properties of the Milky Way's (MW) dark matter halo, including its mass-assembly history, concentration, and subhalo population, remain poorly constrained. We explore the connection between these properties of the MW and its satellite galaxy population, especially the implication of the presence of the Magellanic Clouds for the properties of the MW halo. Using a suite of high-resolution N-body simulations of MW-mass halos with a fixed final ${M}_{\mathrm{vir}}\sim {10}^{12.1}\,{M}_{\odot }$, we find that the presence of Magellanic Cloud-like satellites strongly correlates with the assembly history, concentration, and subhalo population of the host halo, such that MW-mass systems with Magellanic Clouds have lower concentration, more rapid recent accretion, and more massive subhalos than typical halos of the same mass. Using a flexible semi-analytic galaxy formation model that is tuned to reproduce the stellar mass function of the classical dwarf galaxies of the MW with Markov-Chain Monte-Carlo, we show that adopting host halos with different mass-assembly histories and concentrations can lead to different best-fit models for galaxy-formation physics, especially for the strength of feedback. These biases arise because the presence of the Magellanic Clouds boosts the overall population of high-mass subhalos, thus requiring a different stellar-mass-to-halo-mass ratio to match the data. These biases also lead to significant differences in the mass–metallicity relation, the kinematics of low-mass satellites, the number counts of small satellites associated with the Magellanic Clouds, and the stellar mass of MW itself. Finally, observations of these galaxy properties can thus provide useful constraints on the properties of the MW halo.

79 ASTRONOMY AND ASTROPHYSICS↗

Negative Mass in Contemporary Physics, and Its Application to Propulsion

As first analyzed by Hermann Bondi in 1957, matter with negative mass is consistent with the structure of Einstein's general theory of Relativity. Although initially the concept was considered just a theoretical curiosity, negative mass, or "exotic matter," is now incorporated into the body of mainstream physics in a number of forms. Negative mass has a number of rather non-intuitive properties, which, as first noted by Bondi, and then later commented on by Forward (1990), Landis (1991), and others, results in possible applications for propulsion requiring little, or possibly no, expenditure of fuel. As pointed out by Morris and Thorne (1988) and others, negative mass (or, more strictly, a violation of the null energy condition) is also a requirement for any proposed faster than light travel. This paper presents the basic theory of negative mass, the ways by which it can manifest in contemporary physical theory, and the counterintuitive properties that result, including possible uses for interstellar propulsion. Although negative mass has moved from a theoretical curiosity to a concept fundamental to the contemporary understanding of physics, it is still not clear whether bulk negative mass can be manufactured, or if it is limited to only appearing at the cosmological scale (e.g., “dark energy:) or in the quantum (e.g., Casimir vacuum) limit. If it can be manufactured, the propulsion applications would be significant.

Landis, Geoffrey A.↗

Negative Mass in Contemporary Physics and its Application to Propulsion

As first analyzed by Hermann Bondi in 1957, matter with negative mass is consistent with the structure of Einstein's general theory of Relativity. Although initially the concept was considered just a theoretical curiosity, negative mass, or "exotic matter," is now incorporated into the body of mainstream physics in a number of forms. Negative mass has a number of rather non-intuitive properties, which, as first noted by Bondi, and then later commented on by Forward (1990), Landis (1991), and others, results in possible applications for propulsion requiring little, or possibly no, expenditure of fuel. As pointed out by Morris and Thorne (1988) and others, negative mass (or, more strictly, a violation of the null energy condition) is also a requirement for any proposed faster than light travel. This paper presents the basic theory of negative mass, the ways by which it can manifest in contemporary physical theory, and the counterintiutive properties that result, including possible uses for interstellar propulsion.Although negative mass has moved from a theoretical curiosity to a concept fundamental to the contemporary understanding of physics, it is still not clear whether bulk negative mass can be manufactured, or if it is limited to only appearing at the cosmological scale (e.g., "dark energy:) or in the quantum (e.g., Casimir vacuum) limit. If it can be manufactured, the propulsion applications would be significant.

Landis, Geoffrey A.↗

DEEP, WIDE-FIELD CCD PHOTOMETRY FOR THE OPEN CLUSTER NGC 3532

We present the results of a deep, wide-field CCD survey for the open cluster NGC 3532. Our new BV(RI){sub c} photometry effectively covers a one square degree area and reaches an unprecedented depth of V {approx} 21 to reveal that NGC 3532 is a rich open cluster that harbors a large number of faint, low-mass stars. We employ a number of methods to reduce the impact of field star contamination in the cluster color-magnitude diagrams (CMDs), including supplementing our photometry with JHK{sub s} data from the 2MASS catalog. These efforts allow us to define a robust sample of candidate main-sequence stars suitable for a purely empirical determination of the cluster's parameters by comparing them to the well-established Hyades main sequence. Our results confirm previous findings that NGC 3532 lies fairly near to the Sun [(m - M){sub 0} = 8.46 {+-} 0.05; 492{sup +12}{sub -11} pc] and has an extremely low reddening for its location near the Galactic plane [E(B - V) = 0.028 {+-} 0.006]. Moreover, an age of {approx}300 Myr has been derived for the cluster by fitting a set of overshooting isochrones to the well-populated upper main sequence. This new photometry also extends faint enough to reach the cluster white dwarf sequence, as confirmed by our photometric recovery of eight spectroscopically identified members of the cluster. Using the location of these eight members, along with the latest theoretical cooling tracks, we have identified {approx}30 additional white dwarf stars in the [V, (B - V)] CMD that have a high probability of belonging to NGC 3532. Reassuringly, the age we derive from fitting white dwarf isochrones to the locus of these stars, 300 {+-} 100 Myr, is consistent with the age derived from the turnoff. Our analysis of the photometry also includes an estimation of the binary star fraction as well as a determination of the cluster's luminosity and mass functions.

79 ASTRONOMY AND ASTROPHYSICS↗

Aerosol transport and wet scavenging in deep convective clouds: a case study and model evaluation using a multiple passive tracer analysis approach

The effect of wet scavenging on ambient aerosols in deep, continental convective clouds in the mid-latitudes is studied for a severe storm case in Oklahoma during the Deep Convective Clouds and Chemistry (DC3) field campaign. A new passive-tracer based transport analysis framework is developed to characterize the convective transport based on the vertical distribution of several slowly reacting and nearly insoluble trace gases. The passive gas concentration in the upper troposphere convective outflow results from a mixture of 47% from the lower level (0-3 km), 21% entrained from the upper troposphere, and 32% from mid-atmosphere based on observations. The transport analysis framework is applied to aerosols to estimate aerosol transport and wet-scavenging efficiency. Observations yield high overall scavenging efficiencies of 81% and 68% for aerosol mass (Dp < 1μm) and aerosol number (0.03< Dp < 2.5μm), respectively. Little chemical selectivity to wet scavenging is seen among observed submicron sulfate (84%), organic (82%), and ammonium (80%) aerosols, while nitrate has a much lower scavenging efficiency of 57% likely due to the uptake of nitric acid. Observed larger size particles (0.15 - 2.5μm) are scavenged more efficiently (84%) than smaller particles (64%; 0.03 - 0.15μm). The storm is simulated using the chemistry version of the WRF model. Compared to the observation based analysis, the standard model underestimates the wet scavenging efficiency for both mass and number concentrations with low biases of 31% and 40%, respectively. Adding a new treatment of secondary activation significantly improves simulation results, so that the bias in scavenging efficiency in mass and number concentrations is reduced to <10%. This supports the hypothesis that secondary activation is an important process for wet removal of aerosols in deep convective storms.

Yang, Qing↗

Cosmic strings and the origin of globular clusters

We hypothesize that cosmic string loops are the seeds about which globular clusters accrete. Fixing the cosmic string tension by demanding that the peak in the distribution of masses of objects accreting onto string loops agrees with the peak in the observed mass distribution of globular clusters in our Milky Way galaxy, we then compute the expected number density and mass function of globular clusters, and compare with observations. Our hypothesis naturally explains why globular clusters are the oldest and most dense objects in a galaxy, and why they are found in the halo of the galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

The role of the turbulence driving mode for the initial mass function

Turbulence is a critical ingredient for star formation, yet its role for the initial mass function (IMF) is not fully understood. Here we perform magnetohydrodynamical (MHD) simulations of star cluster formation including gravity, turbulence, magnetic fields, stellar heating, and outflow feedback to study the influence of the mode of turbulence driving on IMF. We find that simulations that employ purely compressive turbulence driving (COMP) produce a higher fraction of low-mass stars as compared to simulations that use purely solenoidal driving (SOL). The characteristic (median) mass of the sink particle (protostellar) distribution for COMP is shifted to lower masses by a factor of ∼1.5 compared to SOL. Our simulation IMFs capture the important features of the observed IMF form. We find that turbulence-regulated theories of the IMF match our simulation IMFs reasonably well in the high-mass and low-mass range, but underestimate the number of very low-mass stars, which form towards the later stages of our simulations and stop accreting due to dynamical interactions. Our simulations show that for both COMP and SOL, the multiplicity fraction is an increasing function of the primary mass, although the multiplicity fraction in COMP is higher than that of SOL for any primary mass range. We find that binary mass ratio distribution is independent of the turbulence driving mode. The average specific angular momentum of the sink particles in SOL is a factor of 2 higher than that for COMP. Overall, we conclude that the turbulence driving mode plays a significant role in shaping the IMF.

79 ASTRONOMY AND ASTROPHYSICS↗