Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Ferromagnetism and ferroelectricity in epitaxial BiMnO{sub 3} ultra-thin films

We studied the ferroelectric and ferromagnetic properties of compressive strained and unstrained BiMnO{sub 3} thin films grown by rf-magnetron sputtering. BiMnO{sub 3} samples exhibit a two-dimensional cube-on-cube growth mode and a pseudo-cubic structure up to a thickness of 15 nm and of 25 nm when deposited on (001) SrTiO{sub 3} and (110) DyScO{sub 3}, respectively. Above these thicknesses, we observe a switching to a three-dimensional island growth mode and a simultaneous structural change to a (00l) oriented monoclinic unit cell. While ferromagnetism is observed below a T{sub C} ≈ 100 K for all samples, signatures of room temperature ferroelectricity were found only in the pseudo-cubic ultra-thin films, indicating a correlation between electronic and structural orders.

36 MATERIALS SCIENCE↗

Liquid-Phase Surface Alloying of Copper with Stainless Steel Using Low-Energy, High-Current Electron Beam

The paper deals with the formation of the stainless steel-copper surface alloy which occurs during the single vacuum cycle. Deposition of the stainless steel film onto a copper substrate is performed via successive magnetron sputtering followed by its liquid-phase mixing with copper using the low-energy, high-current electron beam of microsecond length. Numerical calculations are used to identify the optimum irradiation modes for the surface alloying. It is found that the optimum irradiation modes provide the homogeneous surface alloying, and the copper concentration in the obtained layer increases with the increase in energy density of the low-energy, high-current electron beam. The formation of the stainless steel-copper surface alloy increases the wear resistance of copper specimens by 7.5 times as compared to the original specimens. In addition, it is ascertained that the wear resistance of the surface alloy exceeds that of the common film coating (1 μm) more than 5 times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antibacterial properties and cytocompatibility of tantalum oxide coatings with different silver content

Tantalum (Ta) oxides and their coatings have been proved to increase their applications in the biomedical fields by improving osseointegration and wear resistance. In this study, Ta oxide coatings containing different proportions of Ag are deposited on SS304 materials. A twin-gun magnetron sputtering system is used to deposit the tantalum oxide-Ag coating. In this study, Staphylococcus aureus, which exhibits physiological commensalism on the human skin, nares, and mucosal and oral areas, is chosen as the model for in vitro antibacterial analyses via a fluorescence staining method using Syto9. The cytocompatibility and adhesive morphology of human skin fibroblast cells (CCD-966SK) on the coatings are also determined by using the microculture tetrazolium assay. This study shows that Ta{sub 2}O{sub 5} and Ta{sub 2}O{sub 5}-Ag coatings with 12.5 at. % of Ag exhibit improved antibacterial effects against S. aureus and have good skin fibroblast cell cellular biocompatibility.

36 MATERIALS SCIENCE↗

Influence of N{sup +} ions on bandgap and electrical resistivity of TiN thin films

In the present work, nitrogen ions are embedded into Ti thin films (200 nm) using low energy ion beam implantation (70 keV) by varying ions fluence from 4×10{sup 15} ions/cm{sup 2} to 2×10{sup 16} ions/cm{sup 2}. For this, Ti films were grown using DC magnetron sputtering in Ar environment (power 200 W). TiN films were then characterized using versatile techniques for estimating the band gap and electrical resistivity. X-ray diffraction pattern shows shift in peaks towards higher angle with increase in nitrogen fluence that confirms the introduction of strain in Ti films. UV-Vis spectra show that band gap is reduced from 3.75 eV to 1.7 eV with increase in fluence from 4×10{sup 15} ions/cm{sup 2} to 2×10{sup 16} ions/cm{sup 2}. Furthermore, electrical resistivity also decreases from 2.67×10{sup −4} Ω.cm to 2.31×10{sup −4} Ωcm with nitrogen ion fluence. Based on these results, it can be inferred that ion implantation is an effective approach for uniform distribution of N ions in host matrix and tuning of optical and electrical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of RF power on structural and magnetic properties of La doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films

Effect of RF power on structural and magnetic properties of lanthanum (La{sup 3+}) doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films grown on p-Si substrates by radio frequency (RF) magnetron sputtering has studied in this investigation. It is observed that the sputtering power affects the crystalline nature and magnetic properties of grown thin films. X-ray diffraction and Raman spectrum confirms that the Bi{sub 2}Fe{sub 4}O{sub 9} (BFO) thin films were crystallized well with orthorhombic structure. The BFO thin films which was prepared at sputtering power of 100 W have good crystallinity than those prepared at 40 W. The magnetic properties are investigated by vibrating sample magnetometer. The magnetic hysteresis perceptive loop shows that the anti-ferromagnetic behavior of the sample at room temperature. These results confirms that the crystallinity and magnetic properties of the BFO thin films were enhanced at the higher sputtering power (100 W).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High upper critical field in disordered niobium nitride superconductor

Superconducting Niobium Nitride thin films have been deposited on glass, aluminum nitride buffered glass, and oxidized silicon substrates by reactive DC magnetron sputtering at ambient substrate temperatures. The crystal structure of these thin films has been determined to be cubic fcc B1 structure by Glancing Incidence X-Ray Diffraction analysis. The superconducting transition temperatures of the thin films were measured to be greater than 11.6 K with a maximum of 13.4 K. The negative temperature coefficient of resistance observed in these thin films indicates the presence of disorder. Magneto-resistance measurements have been carried out on these thin films patterned into standard four probe geometry upto a maximum magnetic field of 12 T for two films and upto 15 T for the other two films. The dependence of transition temperature on the applied field is analyzed to estimate the upper critical field. The upper critical field for most of the films was estimated to exceed 35 T, while one of the most disordered films had an estimated upper critical field greater than 70 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ti seed layers on structure of self-organized epitaxial face-centered-cubic-Ag(001) oriented nanodots

The influence of Ti seed layers on the structure of self-organized Ag nanodots, obtained with a Ti seed-layer-assisted thermal agglomeration method, has been investigated. The samples were grown on MgO(001) single crystal substrates by RF magnetron sputter deposition. The samples were deposited at room temperature and post-annealed at 350 °C for 4 h while maintaining the chamber vacuum conditions. The results of atomic force microscopy (AFM) observations indicated that the insertion of the Ti seed layer (0.6–5.0 nm) between the MgO substrate and Ag layer promotes the agglomeration process, forming the nanodot array. Comparisons between the AFM images revealed that the size of the Ag nanodots was increased with an increase in the Ti seed layer thickness. The atomic concentration of the film surface was confirmed by X-ray photoelectron spectroscopy (XPS). The XPS result suggested that the nanodot surface mainly consisted of Ag. Moreover, X-ray diffraction results proved that the initial deposition of the Ti seed layer (0.6–5.0 nm) onto MgO(001) prior to the Ag deposition yielded high-quality fcc-Ag(001) oriented epitaxial nanodots. The optical absorbance spectra of the fabricated Ag nanodots with various Ti seed layer thicknesses were obtained in the visible light range.

36 MATERIALS SCIENCE↗

Correlation of photothermal conversion on the photo-induced deformation of amorphous carbon nitride films prepared by reactive sputtering

The photo-induced deformation of hydrogen-free amorphous carbon nitride (a-CN{sub x}) films was investigated under visible-light illumination. The films gave rise to photothermal conversion by irradiation. In this study, we investigated the effects of thermal energy generated by irradiation on the deformation of a-CN{sub x}/ultrathin substrate bimorph specimens. The films were prepared on both ultrathin Si and SiO{sub 2} substrates by reactive radio-frequency magnetron sputtering from a graphite target in the presence of pure nitrogen gas. The temperature of the film on the SiO{sub 2} substrate increased as the optical band-gap of the a-CN{sub x} was decreased. For the film on Si, the temperature remained constant. The deformation degree of the films on Si and SiO{sub 2} substrates were approximately the same. Thus, the deformation of a-CN{sub x} films primarily induced by photon energy directly.

36 MATERIALS SCIENCE↗

Effect of Reactive Sputtering Parameters on TiAlN Nanocoating Structure and Morphology

The effect of substrate bias and nitrogen flow rate on the TiAlN nanocoating structure and morphology has been investigated by using reactive unbalance DC magnetron sputtering. TiAlN nanocoating was deposited on the tungsten carbide insert tool and the structure and morphology were characterized by using XRD and AFM, respectively. The substrate bias was varied between 0 to -221 V and the nitrogen flow rate was varied between 30 to 72 sccm. The results showed that the structure of TiAlN nanocoating consisted of mainly (111) and (200) plane. The structure was significatly influenced by substrate bias in promoting finer crystal size and increased crystal plane spacing while the rms roughness of nanocoating was influenced by substrate bias and nitrogen flow rate.

36 MATERIALS SCIENCE↗

Beta (β) tungsten thin films: Structure, electron transport, and giant spin Hall effect

We use a simple magnetron sputtering process to fabricate beta (β) tungsten thin films, which are capable of generating giant spin Hall effect. As-deposited thin films are always in the metastable β-W phase from 3.0 to 26.7 nm. The β-W phase remains intact below a critical thickness of 22.1 nm even after magnetic thermal annealing at 280 °C, which is required to induce perpendicular magnetic anisotropy (PMA) in a layered structure of β-W/Co{sub 40}Fe{sub 40}B{sub 20}/MgO. Intensive annealing transforms the thicker films (>22.1 nm) into the stable α-W phase. We analyze the structure and grain size of both β- and α-W thin films. Electron transport in terms of resistivity and normal Hall effect is studied over a broad temperature range of 10 K to at least 300 K on all samples. Very low switching current densities are achieved in β-W/Co{sub 40}Fe{sub 40}B{sub 20}/MgO with PMA. These basic properties reveal useful behaviors in β-W thin films, making them technologically promising for spintronic magnetic random access memories and spin-logic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-organization during growth of ZrN/SiN{sub x} multilayers by epitaxial lateral overgrowth

ZrN/SiN{sub x} nanoscale multilayers were deposited on ZrN seed layers grown on top of MgO(001) substrates by dc magnetron sputtering with a constant ZrN thickness of 40 Å and with an intended SiN{sub x} thickness of 2, 4, 6, 8, and 15 Å at a substrate temperature of 800 °C and 6 Å at 500 °C. The films were investigated by X-ray diffraction, high-resolution scanning transmission electron microscopy, and energy dispersive X-ray spectroscopy. The investigations show that the SiN{sub x} is amorphous and that the ZrN layers are crystalline. Growth of epitaxial cubic SiN{sub x}—known to take place on TiN(001)—on ZrN(001) is excluded to the monolayer resolution of this study. During the course of SiN{sub x} deposition, the material segregates to form surface precipitates in discontinuous layers for SiN{sub x} thicknesses ≤6 Å that coalesce into continuous layers for 8 and 15 Å thickness at 800 °C, and for 6 Å at 500 °C. The SiN{sub x} precipitates are aligned vertically. The ZrN layers in turn grow by epitaxial lateral overgrowth on the discontinuous SiN{sub x} in samples deposited at 800 °C with up to 6 Å thick SiN{sub x} layers. Effectively a self-organized nanostructure can be grown consisting of strings of 1–3 nm large SiN{sub x} precipitates along apparent column boundaries in the epitaxial ZrN.

36 MATERIALS SCIENCE↗

Local structure study of (In{sub 0.95−x}Fe{sub x}Cu{sub 0.05}){sub 2}O{sub 3} thin films using x-ray absorption spectroscopy

The (In{sub 0.95−x}Fe{sub x}Cu{sub 0.05}){sub 2}O{sub 3} (x = 0.06, 0.08, 0.15, and 0.20) films prepared by RF-magnetron sputtering were investigated by the combination of x-ray absorption spectroscopy (XAS) at Fe, Cu, and O K-edge. Although the Fe and O K-edge XAS spectra show that the Fe atoms substitute for the In sites of In{sub 2}O{sub 3} lattice for all the films, the Cu K-edge XAS spectra reveal that the codoped Cu atoms are separated to form the Cu metal clusters. After being annealed in air, the Fe atoms are still substitutionally incorporated into the In{sub 2}O{sub 3} lattice, while the Cu atoms form the CuO secondary phases. With the increase of Fe concentration, the bond length R{sub Fe-O} shortens and the Debye–Waller factor σ{sup 2}{sub Fe-O} increases in the first coordination shell of Fe, which are attributed to the relaxation of oxygen environment around the substitutional Fe ions. The forming of Cu relating secondary phases in the films is due to high ionization energy of Cu atoms, leading that the Cu atoms are energetically much harder to be oxidized to substitute for the In sites of In{sub 2}O{sub 3} lattice than Fe atoms. These results provide new experimental guidance in the preparation of the codoped In{sub 2}O{sub 3} based dilute magnetic oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the delamination dynamic of sputtered amorphous carbon nitride films

We present in this study a spectroscopic investigation of spontaneous delamination of amorphous carbon nitride (a-CN{sub x}) films deposited on silicon substrates (Si) by rf magnetron sputtering of a graphite target in pure Ar/N{sub 2} gas mixture. The microstructural properties of the films were determined in their as-deposited state using infrared absorption and Raman spectroscopy experiments. Various shapes of debonding patterns have been observed. Based on the present experimental evidence, a description of nitrogen incorporation and the resulting hybridization states of the CN bonds in the a-CN{sub x} films prior and after delamination are proposed to elucidate the microstructural origin of this delamination occurring along the a-CN{sub x}/Si interface and the physicochemical mechanism that governed its dynamic.

36 MATERIALS SCIENCE↗

Magneto-transport properties of oriented Mn{sub 2}CoAl films sputtered on thermally oxidized Si substrates

Spin gapless semiconductors are interesting family of materials by embracing both magnetism and semiconducting due to their unique band structure. Its potential application in future spintronics requires realization in thin film form. In this Letter, we report fabrication and transport properties of spin gapless Mn{sub 2}CoAl films prepared on thermally oxidized Si substrates by magnetron sputtering deposition. The films deposited at 673 K are well oriented to (001) direction and display a uniform-crystalline surface. Magnetotransport measurements on the oriented films reveal a semiconducting-like resistivity, small anomalous Hall conductivity, and linear magnetoresistance representative of the transport signatures of spin gapless semiconductors. The magnetic properties of the films have also been investigated and compared to that of bulk Mn{sub 2}CoAl, showing small discrepancy induced by the composition deviation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of RF sputtered cadmium telluride (CdTe) thin films: Influence of deposition pressure

Influence of deposition pressure on structural, morphology, electrical and optical properties of CdTe thin films deposited at low substrate temperature (100°C) by RF magnetron sputtering was investigated. The formation of CdTe was confirmed by low angle XRD and Raman spectroscopy. The low angle XRD analysis revealed that the CdTe films have zinc blende (cubic) structure with crystallites having preferred orientation in (111) direction. Raman spectra show the longitudinal optical (LO) phonon mode peak ∼ 165.4 cm{sup -1} suggesting high quality CdTe film were obtained over the entire range of deposition pressure studied. Scanning electron microscopy analysis showed that films are smooth, homogenous, and crack-free with no evidence of voids. The EDAX data revealed that CdTe films deposited at low deposition pressure are high-quality stoichiometric. However, for all deposition pressures, films are rich in Cd relative to Te. The UV-Visible spectroscopy analysis show the blue shift in absorption edge with increasing the deposition pressure while the band gap show decreasing trend. The highest electrical conductivity was obtained for the film deposited at deposition pressure 1 Pa which indicates that the optimized deposition pressure for our sputtering unit is 1 Pa. Based on the experimental results, these CdTe films can be useful for the application in the flexible solar cells and other opto-electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoluminescence of Cu{sub 2}O Crystals of Different Origins

Low-temperature luminescence spectra of Cu{sub 2}O crystals grown by different methods (copper oxidation, induction charge melting, magnetron sputtering, and hydrothermal), as well as natural crystals, have been compared. It is suggested that the high quality of natural crystals and crystals grown by the hydrothermal method is due to the fact that they grow for a long time at relatively low temperatures, which facilitates the minimization of stress.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Residual stress-dependent electric conductivity of sputtered co-doped CeO{sub 2} thin-film electrolyte

Sm{sup 3+} and Nd{sup 3+} co-doped ceria thin-film electrolytes have been deposited on polycrystalline alumina substrates via RF magnetron sputtering. Electric conductivity is evaluated with respect to the residual stress in the film by sin{sup 2} {psi}-methodology, indicating that an in-plane tensile stress is applied to the as-deposited film. The stress in the film increases as annealing temperature decreases, and there is an enlarged crystal lattice. The results also reveal that the annealed film with a greater stress shows a higher electric conductivity, which might be due to the lower activation energy. The conductivity of the film annealed at 600 deg. C is as high as 0.009 S cm{sup -1} at 500 deg. C, and the residual stress is determined to be 542.70 MPa at room temperature.

36 MATERIALS SCIENCE↗

Structure transformation of Ti films deposited on SiC single crystal substrates

Highlights: • In this paper, an interesting intermediate state of the fcc-hcp transformation in Ti films was observed. • We figured this intermediate structure out by XRD and HRTEM. • The formation of this intermediate state and the mechanism of thickness-dependent fcc-hcp transformation were discussed. - Abstract: This paper reports the structure transformation of Ti films deposited on SiC(0001) single crystal substrates using DC magnetron sputtering. Film thickness, sputter power and temperature of deposition were changed to investigate structure transformation of Ti films. The structure characterization of Ti film was performed by means of X-Ray Diffraction (XRD) and High-Resolution Transmission Electron Microscope (HRTEM). The results showed that the Ti film grew epitaxially with a face centered cubic (fcc) structure even the thickness is up to about 50 nm. High temperature and low sputter power are propitious to the formation of fcc-Ti. An interesting intermediate state of the fcc-hcp transformation was observed. This intermediate structure could help us to understand the mechanism of thickness-dependent fcc-hcp transformation in Ti thin films.

36 MATERIALS SCIENCE↗