Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

TL-OSL study of Li{sub 3}PO{sub 4}: Mg, Cu phosphor

In the present work, we report the thermoluminescence and optically stimulated luminescence properties of Mg and Cu doped Li{sub 3}PO{sub 4} phosphor. The phosphor was synthesized by precipitation method. The thermoluminescence dosimetric peak temperature for the phosphor varies with concentrations of Mg and Cu. Li{sub 3}PO{sub 4} shows good response to 470nm optical stimulation. The OSL sensitivity of the phosphor is approximately 12 times than that of standard Lithium magnesium phosphate. This study may help to develop this material for the application in real time dosimetry using optically stimulated luminescence.

36 MATERIALS SCIENCE↗

Mg doped InN and confirmation of free holes in InN

We report a systematic investigation on Mg doped InN epilayers grown by radio-frequency plasma-assisted molecular beam epitaxy. Electrolyte capacitance voltage (ECV) combined with thermopower measurements find p-type conduction over an Mg concentration range. For InN:Mg in this p-type 'window' the Seebeck coefficients dramatically change their signs from negative to positive when the thickness of undoped InN interlayer decreases to zero. This notable sign change of Seebeck coefficient explains the previous inconsistency between ECV and thermopower results and confirms the existence of mobile holes in the InN:Mg. Taking into account the undoped InN interlayer, the hole density and mobility are extracted.

36 MATERIALS SCIENCE↗

Destruction of the Aluminum–Magnesium Alloy under the Influence of Pulsed Laser Radiation against Creep Conditions

Abstract—Using high-speed video recording, the stages of predestruction and development of a main crack initiated by pulsed infrared laser radiation on the surface of the AlMg6 aluminum–magnesium alloy deformed by the uniaxial tensile testing under creep conditions are studied. The role of macroscopic bands of plastic strain in the development of the last deformation jump with an amplitude of about 10%, and the generation and propagation of the main crack is revealed. A possible mechanism of fracture is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the crystallographic structure and orientations of the Al2Ca phase in a Mg-Al-Ca-Mn alloy

Highlights: • Al{sub 2}Ca particle containing 180° rotation twin • Orientations transformation between [111] and the [114] • New crystallographic OR between Al{sub 2}Ca and Mg matrix - Abstract: Because of the second phases with high melting point, Mg-Al-Ca system alloys have better high temperature strength and creep resistance and attract much attention on the second phases. Crystallographic structure and orientations of the Al{sub 2}Ca(C15) phase had been investigated in the aged Mg-5.0 wt%Al-3.0 wt%Ca-0.5wt%Mn alloy. Several typical characteristics of Al{sub 2}Ca particles had been repeatedly observed. Firstly, Al{sub 2}Ca particles containing 180° rotation twin [101]{sub T} had been observed and analyzed by simulating the electron diffraction patterns. Then, Al{sub 2}Ca particle exhibiting different orientations in its different areas, with a transition area containing stacking faults, was observed. Atomic structure was simulated and analyzed to better understand this transition. By transmission electron microscope analyses and calculations based on crystallographic knowledge, a new crystallographic orientation relationship between Al{sub 2}Ca phase and the magnesium matrix was identified as: [1-210]α//[110]{sub C15}, (0001)α//(001){sub C15}, (10-10)α//(-110){sub C15}. Stereographic projections of this orientation relationship, together with the reported one ([-1100]{sub α}//[-110]{sub C15}, (0001){sub α}//(111){sub C15}), were calculated and analyzed. Along with the orientation relationships in FCC/HCP, discussions had been carried out about their relationships.

36 MATERIALS SCIENCE↗

Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy

Wrought magnesium alloys for demanding structural applications require high quality defect free cast feedstock. The aim of this study was to first identify and characterise typical defects in direct chill cast magnesium–aluminium–zinc (AZ) alloy billet and then use modelling to understand the origins of these defects so they can be prevented. Defects were first located using ultrasonic inspection and were then characterised using X-ray computed tomography (XCT) and serial sectioning, establishing the presence of oxide films and intermetallic particles Al{sub 8}Mn{sub 5} in all defects. A model was developed to predict the flow patterns and growth kinetics of the intermetallic phases during casting, which influence the formation of defects. Simulation of the growth of the intermetallic particles demonstrated that precipitation from the liquid occurs in the mould. The combination of the entrained oxide films and intermetallic particles recirculates in the liquid metal and continues to grow, until large enough to settle, which is predicted to occur at the centre of the mould where the flow is the slowest. Based on these predictions, strategies to reduce the susceptibility to defect formation are suggested. - Highlights: • Casting defects in magnesium direct chill casting have been imaged and characterised in 3-dimensions. • The occurrences of co-located clusters of particles and oxide films have been characterised and explained. • A coupled model has been developed to help interpret the observed trend for defects located towards the centre of billets.

36 MATERIALS SCIENCE↗

Effect of Pulsed IR Laser Radiation on the Dynamics and Morphology of Deformation Bands in an Aluminum–Magnesium Alloy

The dynamics and morphology of deformation bands under the simultaneous effect of mechanical loading and pulsed IR laser radiation on the surface of in aluminum–magnesium alloy AlMg6 were studied by high-speed video recording. The conditions, under which a laser pulse pierces a through hole with a diameter of an order of magnitude smaller than the thickness of a plane specimen, thus inducing the development of a complicated spatiotemporal structure of deformation bands and a macroscopic jump in the tension diagram, were determined. The morphological transitions associated with the transformation of the type, shape, and spatiostatistical distribution of bands with a change in the laser pulse energy density were revealed. The probable mechanism of this phenomenon was discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structures of the new ternary stannides La{sub 3}Mg{sub 4−x}Sn{sub 2+x} and LaMg{sub 3−x}Sn{sub 2}

Synthesis and structural characterization of the two new lanthanum–magnesium–stannides La{sub 3}Mg{sub 4−x}Sn{sub 2+x} (0.12≤x≤0.40) and LaMg{sub 3−x}Sn{sub 2} (0.33≤x≤0.78) are reported. The crystal structures of these intermetallics were determined by single crystal X-ray diffraction analysis and confirmed by Rietveld refinement of powder X-ray diffraction patterns of the corresponding samples. The La{sub 3}Mg{sub 4−x}Sn{sub 2+x} phase crystallizes in the hexagonal Zr{sub 3}Cu{sub 4}Si{sub 2} structure type (P6¯2m, hP9, Z=3, x=0.12(1), a=7.7974(7), c=4.8384(4) Å), which represents an ordered derivative of the hP9-ZrNiAl prototype, ubiquitous among equiatomic intermetallics. The LaMg{sub 3–x}Sn{sub 2} phase is the second representative of the trigonal LaMg{sub 3−x}Ge{sub 2} type, which is a superstructure of the LaLi{sub 3}Sb{sub 2} structure type (P3¯1c, hP34-0.12, Z=6, x=0.35(1), a=8.3222(9), c=14.9546(16) Å). The scheme describing the symmetry reduction/coloring with respect to the parent type is reported here with the purpose to discuss the LaMg{sub 3−x}Sn{sub 2} off-stoichiometry from the geometrical point of view. Structural relationships between the La–Mg–Sn ternary phases, including the already known equiatomic LaMgSn compound (oP12-TiNiSi), are presented in the framework of the AlB{sub 2}-related compounds family and discussed with the aid of group-subgroup relations in the Bärnighausen formalism. - Graphical abstract: Crystal structure of LaMg{sub 3−x}Sn{sub 2} viewed along the (001) direction together with the puckered layer of Mg and Sn atoms hosting Mg2, Mg3 and vacancy □. - Highlights: • Crystal structures of the new La{sub 3}Mg{sub 4−x}Sn{sub 2+x} and LaMg{sub 3−x}Sn{sub 2} phases were determined. • The off-stoichiometry of LaMg{sub 3−x}Sn{sub 2} was discussed from geometrical point of view. • Structural relations between the known La–Mg–Sn phases were established. • The studied compounds are related to the AlB{sub 2} type by symmetry reduction.

36 MATERIALS SCIENCE↗

Effects of Mg-Al-O-Mn-S inclusion on the nucleation of acicular ferrite in magnesium-containing low-carbon steel

Highlights: • We redefine the mechanism of AF nucleation from Gibbs free energy of nucleation. • Complex inclusions present a better ability of inducing AF formation due to the Mn-depleted zone. • The lattice misfit and the thermal strain are calculated in this study. - Abstract: The effects of inclusion size and chemical composition on acicular ferrite (AF) nucleation and possible nucleation mechanisms were discussed. With the use of low-carbon structure steel containing 13 ppm Mg, the chemical composition and size of inclusions were quantified by scanning electron microscopy combined with an energy dispersive spectroscopy system. Results showed that the complex inclusions MgO-MnS and MgO-Al{sub 2}O{sub 3}-MnS are the most effective inclusions for inducing AF nucleation in Mg-containing A36, and their probabilities of AF nucleation are 35.8% and 41.4%, respectively. Moreover, the inclusion size in the range of 1–2 μm exhibits the most remarkable ability to induce AF formation. AF nucleates at the interface of MgO and MgO-Al{sub 2}O{sub 3} because of the low lattice misfit with AF. Complex inclusions, such as MgO-MnS and MgO-Al{sub 2}O{sub 3}-MnS, present a better ability of inducing AF formation than that of MnS due to the Mn-depleted zone.

36 MATERIALS SCIENCE↗

Improvement in the Crystallographic Phase Content and Superconducting Properties of Mechanically Alloyed MgB{sub 2}

In this paper, the results of the superconductivity evaluation of MgB{sub 2} intermetallic-based superconducting materials prepared through mechanical alloying are reported. The formation of the MgB{sub 2} intermetallic phase took place through an intermediate phase reaction at the solid-state reaction temperature, which tends to favor single-phase materials. The annealing of mechanically milled Mg and B powders resulted in the highest mass fraction of MgB{sub 2} observed in this study, reaching more than 90% after annealing at 900 °C for 1 h. At that point, there were still second phases present consisting of Mg, MgO, and Fe{sub 2}B. Improved superconducting properties were obtained in samples sintered at temperatures of 850 °C and 900 °C that had a low resistivity, low critical temperature gap values, and a high residual resistivity ratio (RRR).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Cerium Oxide on Morphologies and Electrochemical Properties of Ni-W-P Coating on AZ91D Magnesium

AZ91D magnesium alloy substrate was first pretreated in a phosphoric acid to obtain a phosphate coating, and then, the electroless ternary Ni-W-P coating was deposited using a sulfate nickel bath. The morphologies of the Ni-W-P coating were observed by using scanning electron microscope, the deposition rate of the coating was examined with the method of gravimetric analysis, and the phase analysis was identified by x-ray diffractometer. Electrochemical property was tested by means of an electrochemical analyzer. The results indicated that the addition of an optimum concentration of CeO{sub 2} (cerium oxide) particles could evidently improve the deposition rate and the stability of the plating bath. However, it acted as an inhibiting effect as the concentration of CeO{sub 2} particles exceeded to 8 mg/L in the sulfate nickel bath. The results also revealed that the morphology of Ni-W-P coating became more smooth, compact and uniform with the increase in the concentrations of CeO{sub 2} particles in the bath, but the corrosion resistance decreased due to the precipitation of crystal phases (Ni{sub 3}P, Ni{sub 4}W, etc.) after heat treatment.

36 MATERIALS SCIENCE↗

Fiber Laser Welding–Brazing Characteristics of Dissimilar Metals AZ31B Mg Alloys to Copper with Mg-Based Filler

Fiber laser welding–brazing of 1-mm-thick AZ31B Mg alloys to 1.5-mm-thick copper (T2) with Mg-based filler was performed in a lap configuration. The weld appearance, interfacial microstructure and mechanical properties were investigated with different heat inputs. The results indicated that processing windows for optimizing appropriate welding parameters were relatively narrow in this case. Visually acceptable joints with certain strength were achieved at appropriate welding parameters. The maximum tensile-shear fracture load of laser-welded-brazed Mg/Cu joint could reach 1730 N at the laser power of 1200 W, representing 64.1% joint efficiency relative to AZ31Mg base metal. The eutectic structure (α-Mg + Mg{sub 2}Cu) and Mg-Cu intermetallic compound was observed at the Mg/Cu interface, and Mg-Al-Cu ternary intermetallic compound were identified between intermetallics and eutectic structure at high heat input. All the joints fractured at the Mg-Cu interface. However, the fracture mode was found to differ. For laser power of 1200 W, the surface was characterized by tearing edge, while that with poor joint strength was almost dominated by smooth surface or flat tear pattern.

36 MATERIALS SCIENCE↗

Superstructure of a phosphor material Ba{sub 3}MgSi{sub 2}O{sub 8} determined by neutron diffraction data

Ba{sub 3}MgSi{sub 2}O{sub 8}, a phosphor host examined for use in white-light devices and plant-growth lamps, was synthesized at 1225 deg. C in air. Its crystal structure has been determined and refined by a combined powder X-ray and neutron Rietveld method (P3-bar, Z=3, a=9.72411(3) A, c=7.27647(3) A, V=595.870(5) A{sup 3}; R{sub p}/R{sub wp}=3.79%/5.03%, {chi}{sup 2}=4.20). Superstructure reflections, observed only in the neutron diffraction data, provided the means to establish the true unit cell and a chemically reasonable structure. The structure contains three crystallographically distinct Ba atoms-Ba1 resides in a distorted octahedral site with S{sub 6} (3-bar) symmetry, Ba2 in a nine-coordinate site with C{sub 3} (3) symmetry, and Ba3 in a ten-coordinate site with C{sub 1} (1) symmetry. The Mg atoms occupy distorted octahedral sites, and the Si atom occupies a distorted tetrahedral site. - Graphical Abstract: Crystal structure of Ba{sub 3}MgSi{sub 2}O{sub 8} viewed along the c direction. Superstructure reflections, observed only in the neutron diffraction data, provided the means to establish the true unit cell and a chemically reasonable structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D characterization of intermetallics in a high pressure die cast Mg alloy using focused ion beam tomography

The degree of spatial interconnection of the Mg{sub 17}Al{sub 12} ({beta}-phase) intermetallic in a Mg-9Al-1Zn alloy was assessed through serial sectioning at the centre and near a corner in a casting cross-section. The three dimensional reconstructions showed that the intermetallics were profusely interconnected forming a scaffold-like network over the entire cross-section, but especially near the casting surface. The scale and degree of the interconnection appeared determined by the local concentration of large dendritic grains injected from the shot sleeve. The volume fractions of intermetallics obtained through the 3D reconstruction indicated a higher content of {beta}-phase at the corner regions in comparison with the core. The volume fractions obtained by FIB were consistent with theoretical and experimental values obtained using other techniques.

36 MATERIALS SCIENCE↗

A study of the deformation and failure mechanisms of protective intermetallic coatings on AZ91 Mg alloys using microcantilever bending

In this study, a nanoindentation-based microcantilever bending technique was utilized to investigate the interfacial properties of a β-Mg{sub 17}Al{sub 12}/AZ91 Mg alloy film/substrate system under tensile loading conditions. Finite element analysis (FEA) was first undertaken to optimise the design of cantilever structures for inducing high tensile stresses at the interface. Cantilevers consisting of a necked region or notch at the interface were determined to be the most successful designs. Microcantilevers containing the β-Mg{sub 17}Al{sub 12}/AZ91 interface were then made using focused ion beam (FIB) milling technique. Necks were made in the cantilevers to intensify the tension at the interface and notches were used to introduce a stress concentration to the interface. During bending, the cantilevers were deflected to failure. Subsequent analysis of the deformed cantilevers using electron microscopies revealed that plastic deformation, and subsequent ductile rupture, of the AZ91 phase was the dominant failure mechanism. When the β-Mg{sub 17}Al{sub 12}/AZ91 film/substrate system was subjected to tension, the softer AZ91 phase failed prior to interfacial delamination, demonstrating that the strength of the interface exceeded the stresses that caused ductile failure in the substrate material. - Highlights: •Microcantilever bending was used to study the property of film/substrate interface. •FEA was used to optimise cantilever design for achieving high interfacial tension. •The intermetallic coatings on AZ91 substrate have strong interfacial adhesion.

36 MATERIALS SCIENCE↗

Tunnel magnetoresistance effect in magnetic tunnel junctions using Fermi-level-tuned epitaxial Fe{sub 2}Cr{sub 1−x}Co{sub x}Si Heusler alloy

This paper reports a systematic investigation on the structural and magnetic properties of Fe{sub 2}Cr{sub 1−x}Co{sub x}Si Heusler alloys with various compositions of x by co-sputtering Fe{sub 2}CrSi and Fe{sub 2}CoSi targets and their applications in magnetic tunnel junctions (MTJs). Fe{sub 2}Cr{sub 1−x}Co{sub x}Si films of high crystalline quality have been epitaxially grown on MgO substrate using Cr as a buffer layer. The L2{sub 1} phase can be obtained at x = 0.3 and 0.5, while B2 phase for the rest compositions. A tunnel magnetoresistance (TMR) ratio of 19.3% at room temperature is achieved for MTJs using Fe{sub 2}Cr{sub 0.3}Co{sub 0.7}Si as the bottom electrode with 350 °C post-annealing. This suggests that the Fermi level in Fe{sub 2}Cr{sub 1−x}Co{sub x}Si has been successfully tuned close to the center of band gap of minority spin with x = 0.7 and therefore better thermal stability and higher spin polarization are achieved in Fe{sub 2}Cr{sub 0.3}Co{sub 0.7}Si. The post-annealing effect for MTJs is also studied in details. The removal of the oxidized Fe{sub 2}Cr{sub 0.3}Co{sub 0.7}Si at the interface with MgO barrier is found to be the key to improve the TMR ratio. When the thickness of the inserted Mg layer increases from 0.3 to 0.4 nm, the TMR ratio is greatly enhanced from 19.3% to 28%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic anisotropy and order structure of L1{sub 0}-FePt(001) single-crystal films grown epitaxially on (001) planes of MgO, SrTiO{sub 3}, and MgAl{sub 2}O{sub 4} substrates

L1{sub 0}–FePt(001) single-crystal films were grown epitaxially on SrTiO{sub 3}(001), MgAl{sub 2}O{sub 4}(001), and MgO(001) substrates. Their uniaxial magnetic anisotropy K{sub u} and the order structure were examined for the film thickness t range of 2–14 nm. All series of films show large K{sub u} of 4 × 10{sup 7} erg/cm{sup 3} in the thickness range higher than 10 nm, with order parameter S of 0.8 and saturation magnetization M{sub s} of 1120 emu/cm{sup 3}. K{sub u} decreased gradually as t decreased. The K{sub u} reduction was considerable when t decreased from 4 nm to 2 nm. No marked difference in the thickness dependence of K{sub u} was found in any series of films, although the lattice mismatch between FePt and the substrates was markedly different. K{sub u} reduction showed good agreement with the reduction of S for the films on MgAl{sub 2}O{sub 4} and MgO. The K{sub u} ∼ S{sup 2} plot showed an almost linear relation, which is in good agreement with theoretical predictions. Transmission electron microscopy images for a FePt film on MgO substrate revealed that the lattice mismatch between FePt(001) and MgO(001) was relaxed in the initial 1 or 2 layers of FePt(001) lattices, which is likely to be true also for two other series of films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal spin-transfer torque in magnetic tunnel junctions (invited)

The thermal spin-transfer torque (TSTT) is an effect to switch the magnetic free layer in a magnetic tunnel junction by a temperature gradient only. We present ab initio calculations of the TSTT. In particular, we discuss the influence of magnetic layer composition by considering Fe{sub x}Co{sub 1–x} alloys. Further, we compare the TSTT to the bias voltage driven STT and discuss the requirements for a possible thermal switching. For example, only for very thin barriers of 3 monolayers MgO, a thermal switching is imaginable. However, even for such a thin barrier, the TSTT is still too small for switching at the moment and further optimization is needed. In particular, the TSTT strongly depends on the composition of the ferromagnetic layer. In our current study, it turns out that at the chosen thickness of the ferromagnetic layer, pure Fe gives the highest thermal spin-transfer torque.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗