Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVEL WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Behavior of the Elastic-Scattering Cross Section σ(E) in the Vicinity of Two Overlapping Levels with Equal Resonance Energies

The elastic-scattering process proceeding through two resonance levels that have the same spin j and equal resonance energies, (E{sub 1} = E{sub 2}), but different widths (Γ{sub 1} ≠ Γ{sub 2}) is considered. It is shown that the energy dependence of the total scattering cross section has two equal maxima at the points E{sub 1} ± (1/2) √(Γ{sub 1}Γ{sub 2}), the cross-section value at the maxima being 4π (2j + 1)ƛ{sup 2}, where ƛ is the wavelength of the incident particle in the c.m. frame, and that, at the energy E{sub 1}, the cross section vanishes, σ (E{sub 1}) = 0. The cross section is symmetric with respect to the point E{sub 1}.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of spacer layers on current-voltage characteristics of resonant-tunneling diode

Using the numerical solution to the Schroedinger equation, current-voltage characteristics of the resonant-tunneling diode with spacer layers were obtained. The dependences of the peak current of the resonant-tunneling diode on the emitter spacer width were plotted. It was shown that the peak current depends periodically on the emitter spacer width. The constructed electron density diagrams showed that the increase in the peak current is associated with the resonant level in the emitter spacer region.

36 MATERIALS SCIENCE↗

Discovery of broad soft X-ray absorption lines from the quasar wind in PDS 456

High-resolution soft X-ray spectroscopy of the prototype accretion disk wind quasar, PDS 456, is presented. Here, the XMM-Newton reflection grating spectrometer spectra are analyzed from the large 2013–2014 XMM-Newton campaign, consisting of five observations of approximately 100 ks in length. During the last observation (OBS. E), the quasar is at a minimum flux level, and broad absorption line (BAL) profiles are revealed in the soft X-ray band, with typical velocity widths of σ{sub v}∼10,000 km s{sup −1}. During a period of higher flux in the third and fourth observations (OBS. C and D, respectively), a very broad absorption trough is also present above 1 keV. From fitting the absorption lines with models of photoionized absorption spectra, the inferred outflow velocities lie in the range ∼0.1--0.2c. The absorption lines likely originate from He and H-like neon and L-shell iron at these energies. A comparison with earlier archival data of PDS 456 also reveals a similar absorption structure near 1 keV in a 40 ks observation in 2001, and generally the absorption lines appear most apparent when the spectrum is more absorbed overall. The presence of the soft X-ray BALs is also independently confirmed by an analysis of the XMM-Newton EPIC spectra below 2 keV. We suggest that the soft X-ray absorption profiles could be associated with a lower ionization and possibly clumpy phase of the accretion disk wind, where the latter is known to be present in this quasar from its well-studied iron K absorption profile and where the wind velocity reaches a typical value of 0.3c.

79 ASTRONOMY AND ASTROPHYSICS↗

Collisional excitation of interstellar formaldehyde

Previous calculations for rates of excitation of ortho-H2CO by collisions with He have been extended to higher rotational levels and kinetic temperatures to 80 K. Rates for para-H2CO have also been computed. Pressure-broadening widths for several spectral lines have been obtained from these calculations and are found to agree with recent data within the experimental uncertainty of 10%. Excitation of formaldehyde by collisions with H2 molecules is also discussed.

Green, S.↗

Radar backscattering from snow facies of the Greenland ice sheet: Results from the AIRSAR 1991 campaign

In June 1991, the NASA/JPL airborne SAR (AIRSAR) acquired C- (lambda = 5.6cm), L- (lambda = 24cm), and P- (lambda = 68m) band polarimetric SAR data over the Greenland ice sheet. These data are processed using version 3.55 of the AIRSAR processor which provides radiometrically and polarimetrically calibrated images. The internal calibration of the AIRSAR data is cross-checked using the radar response from corner reflectors deployed prior to flight in one of the scenes. In addition, a quantitative assessment of the noise power level at various frequencies and polarizations is made in all the scenes. Synoptic SAR data corresponding to a swath width of about 12 by 50 km in length (compared to the standard 12 x 12 km size of high-resolution scenes) are also processed and calibrated to study transitions in radar backscatter as a function of snow facies at selected frequencies and polarizations. The snow facies on the Greenland ice sheet are traditionally categorized based on differences in melting regime during the summer months. The interior of Greenland corresponds to the dry snow zone where terrain elevation is the highest and no snow melt occurs. The lowest elevation boundary of the dry snow zone is known traditionally as the dry snow line. Beneath it is the percolation zone where melting occurs in the summer and water percolates through the snow freezing at depth to form massive ice lenses and ice pipes. At the downslope margin of this zone is the wet snow line. Below it, the wet snow zone corresponds to the lowest elevations where snow remains at the end of the summer. Ablation produces enough meltwater to create areas of snow saturated with water, together with ponds and lakes. The lowest altitude zone of ablation sees enough summer melt to remove all traces of seasonal snow accumulation, such that the surface comprises bare glacier ice.

Rignot, Eric↗

Tool Indicates Contact Angles In Bearing Raceways

Tool devised for use in measuring contact angles between balls and races in previously operated ball bearings. Used on both inner and outer raceways of bearings having cross-sectional widths between approximately 0.5 and 2.0 in. Consists of integral protractor mounted in vertical plane on bracket equipped with leveling screws and circular level indicator. Protractor includes rotatable indicator needle and set of disks of various sizes to fit various raceway curvatures.

Akian, Richard A.↗

Topographic Change Detection Using Full-Waveform Imaging Lidar

The capability of wide-footprint (i.e. 10m or greater), full-waveform laser altimeters to penetrate beneath dense vegetation to directly measure the sub-canopy topography provides us with a unique capability for sensing topographic change in the presence of vegetation. We evaluate the feasibility of using a geolocated laser altimeter return waveform instead of individual elevation measurements to measure vertical elevation change within a laser footprint. The method, dubbed the return pulse correlation method, maximizes the shape similarity of nea-coincident, vertically- geolocated laser return waveforms from two observation epochs as they are vertically-shifted relative to each other. First, we evaluate the inherent accuracy of the pulse correlation method using models and simulations under "bare-Earth" conditions. We then analyze the effects of vegetation and vegetation growth on the change detection capability. The use of this method, combined with order of magnitude improvements to laser altimeter swath widths (from 1 km to 10 km) and the potential for a future spaceborne imaging lidar, may provide subcentimeter level relative change detection beneath vegetation to complement IFSAR's ability to make similar measurements in low or vegetation-free conditions.

Blair, Bryan↗

Pulsed Operation of an Ion Accelerator

Electronic circuitry has been devised to enable operation of an ion accelerator in either a continuous mode or a highpeak power, low-average-power pulsed mode. In the original intended application, the ion accelerator would be used as a spacecraft thruster and the pulse mode would serve to generate small increments of impulse for precise control of trajectories and attitude. The present electronic drive circuitry generates the extraction voltage in pulses. Pulse-width modulation can affect rapid, fine control of time-averaged impulse or ion flux down to a minimum level much lower than that achievable in continuous operation.

Wirz, Richard↗

A Composite Analysis of Snowfall Modes from Four Winter Seasons in Marquette, Michigan

Presented are four winter seasons of data from an enhanced precipitation instrument suite based at the National Weather Service (NWS) Office in Marquette (MQT), Michigan (250–500 cm of annual snow accumulation). In 2014 the site was augmented with a Micro Rain Radar (MRR) and a Precipitation Imaging Package (PIP). MRR observations are utilized to partition large-scale synoptically driven (deep)and surface-forced (shallow) snow events. Coincident PIP and NWS MQT meteorological surface observations illustrate different characteristics with respect to snow event category. Shallow snow events are often extremely shallow, with MRR-indicated precipitation heights of less than 1500 m above ground level. Large vertical reflectivity gradients indicate efficient particle growth, and increased boundary layer turbulence inferred from observations of spectral width implies increased aggregation in shallow snow events. Shallow snow events occur 2 times as often as deep events; however, both categories contribute approximately equally to estimated annual accumulation. PIP measurements reveal distinct regime-dependent snow microphysical differences, with shallow snow events having broader particle size distributions and comparatively fewer small particles and deep snow events having narrower particle size distributions and comparatively more small particles. In addition, coincident surface meteorological measurements indicate that most shallow snow events are associated with surface winds originating from the northwest (over Lake Superior), cold temperatures, and relatively high surface pressures, which are characteristics that are consistent with cold-air outbreaks. Deep snow events have meteorologically distinct conditions that are accordant with midlatitude cyclones and frontal structures, with mostly southwest surface winds, warmer temperatures approaching freezing, and lower surface pressures.

Claire Pettersen↗

A search for resonant production of tt pairs in 4.8 fb -1 of integrated luminosity of pp collisions at √s=1.96 TeV

We search for resonant production of tt pairs in 4.8 fb -1 integrated luminosity of pp collision data at √s = 1.96 TeV in the lepton+jets decay channel, where one top quark decays leptonically and the other hadronically. A matrix element reconstruction technique is used; for each event a probability density function (pdf) of the tt candidate invariant mass is sampled. These pdfs are used to construct a likelihood function, whereby the cross section for resonant tt production is estimated, given a hypothetical resonance mass and width. The data indicate no evidence of resonant production of tt pairs. A benchmark model of leptophobic Z' → tt is excluded with m Z' < 900 GeV at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Turbulence in Continental Stratocumulus, Part II: Eddy Dissipation Rates and Large-Eddy Coherent Structures

This study first illustrates the utility of using the Doppler spectrum width from millimetrewavelength radar to calculate the energy dissipation rate and then to use the energy dissipation rate to study turbulence structure in a continental stratocumulus cloud. It is shown that the turbulence kinetic energy dissipation rate calculated from the radar-measured Doppler spectrum width agrees well with that calculated from the Doppler velocity power spectrum. During the 16-h stratocumulus cloud event, the small-scale turbulence contributes 40%of the total velocity variance at cloud base, 50% at normalized cloud depth=0.8 and 70% at cloud top, which suggests that small-scale turbulence plays a critical role near the cloud top where the entrainment and cloud-top radiative cooling act. The 16-h mean vertical integral length scale decreases from about 160 m at cloud base to 60 m at cloud top, and this signifies that the larger scale turbulence dominates around cloud base whereas the small-scale turbulence dominates around cloud top. The energy dissipation rate, total variance and squared spectrum width exhibit diurnal variations, but unlike marine stratocumulus they are high during the day and lowest around sunset at all levels; energy dissipation rates increase at night with the intensification of the cloud-top cooling. In the normalized coordinate system, the averaged coherent structure of updrafts is characterized by low energy dissipation rates in the updraft core and higher energy dissipation rates surround the updraft core at the top and along the edges. In contrast, the energy dissipation rate is higher inside the downdraft core indicating that the downdraft core is more turbulent. The turbulence around the updraft is weaker at night and stronger during the day; the opposite is true around the downdraft. This behaviour indicates that the turbulence in the downdraft has a diurnal cycle similar to that observed in marine stratocumuluswhereas the turbulence diurnal cycle in the updraft is reversed. For both updraft and downdraft, the maximum energy dissipation rate occurs at a cloud depth=0.8 where the maximum reflectivity and air acceleration or deceleration are observed. Resolved turbulence dominates near cloud base whereas unresolved turbulence dominates near cloud top. Similar to the unresolved turbulence, the resolved turbulence described by the radial velocity variance is higher in the downdraft than in the updraft. The impact of the surface heating on the resolved turbulence in the updraft decreases with height and diminishes around the cloud top. In both updrafts and downdrafts, the resolved turbulence increases with height and reaches a maximum at cloud depth=0.4 and then decreases to the cloud top; the resolved turbulence near cloud top, just as the unresolved turbulence, is mostly due to the cloud-top radiative cooling.

58 GEOSCIENCES↗

Simulation of relaxation times and energy spectra of the CdTe/Hg{sub 1-x}Cd{sub x}Te/CdTe quantum well for variable valence band offset, well width, and composition x

The dependences of relaxation times and energy spectrum of the CdTe/Hg{sub 1-x}Cd{sub x}Te/CdTe quantum well (QW) on its parameters were simulated in the cadmium molar fraction range 0 < x < 0.16. It was found that the x increase from 0 to 0.16 changes electron wave function localization in the QW. A criterion for determining the number of interface levels of localized electrons depending on QW parameters was obtained. The effect of a sharp (by two orders of magnitude) increase in the relaxation time of localized electrons was detected at small QW widths and x close to 0.16.

36 MATERIALS SCIENCE↗

On microscopic theory of radiative nuclear reaction characteristics

A survey of some results in the modern microscopic theory of properties of nuclear reactions with gamma rays is given. First of all, we discuss the impact of Phonon Coupling (PC) on the Photon Strength Function (PSF) because it represents the most natural physical source of additional strength found for Sn isotopes in recent experiments that could not be explained within the standard HFB + QRPA approach. The self-consistent version of the Extended Theory of Finite Fermi Systems in the Quasiparticle Time Blocking Approximation is applied. It uses the HFB mean field and includes both the QRPA and PC effects on the basis of the SLy4 Skyrme force. With our microscopic E1 PSFs, the following properties have been calculated for many stable and unstable even–even semi-magic Sn and Ni isotopes as well as for double-magic {sup 132}Sn and {sup 208}Pb using the reaction codes EMPIRE and TALYS with several Nuclear Level Density (NLD) models: (1) the neutron capture cross sections; (2) the corresponding neutron capture gamma spectra; (3) the average radiative widths of neutron resonances. In all the properties considered, the PC contribution turned out to be significant, as compared with the standard QRPA one, and necessary to explain the available experimental data. The results with the phenomenological so-called generalized superfluid NLD model turned out to be worse, on the whole, than those obtained with the microscopic HFB + combinatorial NLD model. The very topical question about the M1 resonance contribution to PSFs is also discussed.Finally, we also discuss the modern microscopic NLD models based on the self-consistent HFB method and show their relevance to explain the experimental data as compared with the phenomenological models. The use of these self-consistent microscopic approaches is of particular relevance for nuclear astrophysics, but also for the study of double-magic nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Algorithm Theoretical Basis Document (ATBD) - Stream Stage Measurements: V2.5.1 Water Level Products from Satellite Radar Altimetry

In response to the 2018 NASA ROSES Applied Sciences/Water Resources (NASA HQ Program Official: Dr. Brad Doorn) call for proposals, the “Integration of Remotely Sensed Streamflow Data into Alaska Water Resource Management Agency Operations” project with Principal Investigator (PI) Jack Eggleston USGS, was successful, and had the ultimate goal of creating a series of remotely sensed or derived Alaska river parameters for integration into NWIS. These parameters included surface water height and average reach surface water slope (from altimetry), average reach width (from Landsat imagery), and an associated river discharge derived via theoretical means. The surface water height products were required to have both archival and near real time components, noting the availability of ~25years of potential measurements, and accepting the temporal resolution (10-35days) of the suite of radar altimeters. Each surface water level product was expected to be a continuous time series of observation with a sufficient accuracy to highlight monthly, seasonal and interannual variation. The designated set of river reaches were chosen for their geographical distribution, their reach width, and the presence of a radar altimeter mission satellite overpass. This document describes the procedure associated with the creation of these altimetric surface water level products and is relevant to product Version 2.5.1 available from the Global Water Monitor (GWM) web portal.

Altimetry↗

Phosphate Speciation under Organic‐Acid‐Promoted Dissolution of Phosphorus‐Sorbed Ferrihydrite–Boehmite Mixtures: Implications For Soil Phosphorus

Core Ideas Phosphate speciation determines its bioavailability in soils. Phosphate molecular speciation changes occur upon organic‐acid‐promoted dissolution. Results imply that phosphate in acid soils preferentially associated with Fe(III) oxides. Organic‐acid‐promoted dissolution of phosphate is a primary mechanism for enhancing the bioavailability of sorbed, inorganic soil phosphate. Bioavailability of P is, however, dependent on its speciation. Hence, the main objective of this study was to characterize changes in phosphate speciation as a function of pH levels (4–8) during citrate‐promoted dissolution of phosphate adsorbed on ferrihydrite–boehmite mixtures using two different sizes of ferrihydrite. A combination of batch dissolution kinetics and P K‐X‐ray absorption near‐edge structure (XANES) spectroscopy was used. Trends in shifts of white‐line peak energy and full width at half maximum height of P K‐XANES spectra indicated that the phosphate bonding configuration on ferrihydrite–boehmite as single minerals and mineral mixtures was predominantly binuclear–bidentate complexes at pH levels of 4, 6, and 8. When citrate was added to the ferrihydrite–boehmite mixtures with bound phosphate (pH 4 and 6), phosphate was preferentially released from boehmite, resorbed onto ferrihydrite, and precipitated to form noncrystalline FePO 4 minerals. A reverse trend was observed at alkaline pH. These results suggest the potential for excessive P release in P‐enriched acidic soils during a redox event due to preferential association of P to Fe(III) phases.

Adam, Nadia↗

A DROPLET MODEL OF QUIESCENT PROMINENCE DOWNFLOWS

Observations of quiescent prominences with the Solar Optical Telescope on the Hinode satellite have revealed the ubiquitous existence of downflows forming coherent thin and highly structured vertically oriented threads with velocities between 10 and 20 km s{sup -1}. Their widths range between 300 and 500 km. They are often initiated at the top of the visible prominence, but sometimes also at intermediate level. We propose that the downflows are made of plasma packets that squeeze themselves through the dominantly horizontal field under the action of gravity. Their origin is assumed to be hot plasma supplied from either inside or the immediate vicinity of the prominence and condensing at its top. Under compression and further cooling, the matter overflows to the flanks of the prominence dragging its magnetic field with it. Under the increasing action of gravity, vertical structures are forming which eventually disconnect from the field of the inflow channel thus forming finite plasma packets. This process is reminiscent of water flowing over a mountain ridge and breaking up into a multitude of droplets. Like water droplets being subject to air drag, the falling plasma droplets experience a drag force by the horizontal prominence field and assume a steady vertical velocity. This happens via the excitation of Alfven waves. Lateral confinement by the prominence field determines their spatial extent. The small scales of the droplets and the directional balance of their internal tangled magnetic fields can explain the absence of appreciable vertical components in magnetic field measurements. On the basis of the observed width and vertical speed of the downflows and by adopting a prominence field of about 8 G, we derive central density and temperature of the droplets, which turn out to be quite consistent with known prominence characteristics. In the formulation of the drag force a dimensionless 'magnetic drag coefficient' has been introduced with a value well below unity.

79 ASTRONOMY AND ASTROPHYSICS↗

Resolving broadening of ECRH deposition due to edge turbulence in DIII-D by heat deposition measurement

Interaction between microwave power, used for local heating and mode control, and density fluctuations can produce a broadening of the injected beam, as confirmed in experiment and simulation. Increased power deposition width could impact suppression of tearing mode structures on ITER[1]. This work discusses the experimental portion of an effort to understand scattering of injected microwaves by turbulence on the DIII-D tokamak. The corresponding theoretical modeling work can be found in M.B. Thomas et. al.: Submitted to Nuclear Fusion (2017)[Author Note - this paper to be published in same journal]. In a set of perturbative heat transport experiments, tokamak edge millimeter-scale fluctuation levels and microwave heat deposition are measured simultaneously. Beam broadening is separated from heat transport through fitting of modulated fluxes[2]. Electron temperature measurements from a 500 kHz, 48-channel ECE radiometer are Fourier analyzed and used to calculate a deposition-dependent flux[3]. Consistency of this flux with a transport model is evaluated. A diffusive(∝ ∇˜ T e ) and convective(∝ ˜ T e ) transport solution is linearized and compared with energy conservation-derived fluxes. Comparison between these two forms of heat flux is used to evaluate the quality of ECRF deposition profiles, and a Χ 2 minimization finds a significant broadening of 1D equilibrium ray tracing calculations from the benchmarked TORAY-GA ray tracing code[4] is needed. The physical basis, cross-validation, and application of the heat flux method is presented. The method is applied to a range of DIII-D discharges and finds a broadening factor of the deposition profile width which scales linearly with edge density fluctuation level. Furthermore, these experimental results are found to be consistent with the full-wave beam broadening measured by the 3D full wave simulations in the same discharges[5].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗