Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interactive visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A study of high alpha dynamics and flow visualization for a 2.5-percent model of the F-18 HARV undergoing wing rock

Free-to-roll experiments and flow visualization studies have been conducted for a 2.5-percent model of the F-18 undergoing unsteady wing rock oscillations. Data have been acquired in the form of roll angle time histories as well as video recordings and 35 mm photography of the forebody and leading edge extension vortices. The time histories were differentiated to produce angular velocity and angular acceleration. From this the roll moment as a function of time and/or roll angle could be estimated. A thorough analysis of the data has revealed a genuine wing-rock phenomenon. Off-surface flow visualization was used to identiify the forebody and LEX vortex core positions and their interaction in both static and dynamic configurations. A direct correlation between the dynamic data and visualized vortex activity during the wing-rock motion has been made.

Quast, Thomas↗
NASA NTRS1995

Development of a Prototype Simulation Executive with Zooming in the Numerical Propulsion System Simulation

A major difficulty in designing aeropropulsion systems is that of identifying and understanding the interactions between the separate engine components and disciplines (e.g., fluid mechanics, structural mechanics, heat transfer, material properties, etc.). The traditional analysis approach is to decompose the system into separate components with the interaction between components being evaluated by the application of each of the single disciplines in a sequential manner. Here, one discipline uses information from the calculation of another discipline to determine the effects of component coupling. This approach, however, may not properly identify the consequences of these effects during the design phase, leaving the interactions to be discovered and evaluated during engine testing. This contributes to the time and cost of developing new propulsion systems as, typically, several design-build-test cycles are needed to fully identify multidisciplinary effects and reach the desired system performance. The alternative to sequential isolated component analysis is to use multidisciplinary coupling at a more fundamental level. This approach has been made more plausible due to recent advancements in computation simulation along with application of concurrent engineering concepts. Computer simulation systems designed to provide an environment which is capable of integrating the various disciplines into a single simulation system have been proposed and are currently being developed. One such system is being developed by the Numerical Propulsion System Simulation (NPSS) project. The NPSS project, being developed at the Interdisciplinary Technology Office at the NASA Lewis Research Center is a 'numerical test cell' designed to provide for comprehensive computational design and analysis of aerospace propulsion systems. It will provide multi-disciplinary analyses on a variety of computational platforms, and a user-interface consisting of expert systems, data base management and visualization tools, to allow the designer to investigate the complex interactions inherent in these systems. An interactive programming software system, known as the Application Visualization System (AVS), was utilized for the development of the propulsion system simulation. The modularity of this system provides the ability to couple propulsion system components, as well as disciplines, and provides for the ability to integrate existing, well established analysis codes into the overall system simulation. This feature allows the user to customize the simulation model by inserting desired analysis codes. The prototypical simulation environment for multidisciplinary analysis, called Turbofan Engine System Simulation (TESS), which incorporates many of the characteristics of the simulation environment proposed herein, is detailed.

Reed, John A.↗
NASA NTRS1983

An experimental study of three-dimensional shock wave/boundary layer interactions generated by sharp fins

The interaction between a turbulent boundary layer and a shock wave generated by a sharp fin with leading edge sweepback was investigated. The incoming flow was at Mach 2.96 and at a unit Reynolds number of 63 x 10 to the 6th power 0.1 m. The approximate incoming boundary layer thickness was either 4 mm or 17 mm. The fins used were at 5 deg, 9 deg and 15 deg incidence and had leading edge sweepback from 0 deg to 65 deg. The tests consisted of surface kerosene lampblack streak visualization, surface pressure measurements, shock wave shape determination by shadowgraphs, and localized vapor screen visualization. The upstream influence lengths of the fin interactions were correlated using viscous and inviscid flow parameters. The parameters affecting the surface features close to the fin and way from the fin were also identified. Essentially, the surface features in the farfield were found to be conical.

Lu, F. K.↗
DOE OSTI2024

Centralized Interactive Phenomics Resource: an integrated online phenomics knowledgebase for health data users

Development of clinical phenotypes from electronic health records (EHRs) can be resource intensive. Several phenotype libraries have been created to facilitate reuse of definitions. However, these platforms vary in target audience and utility. Here, we describe the development of the Centralized Interactive Phenomics Resource (CIPHER) knowledgebase, a comprehensive public-facing phenotype library, which aims to facilitate clinical and health services research. The platform was designed to collect and catalog EHR-based computable phenotype algorithms from any healthcare system, scale metadata management, facilitate phenotype discovery, and allow for integration of tools and user workflows. Phenomics experts were engaged in the development and testing of the site. The knowledgebase stores phenotype metadata using the CIPHER standard, and definitions are accessible through complex searching. Phenotypes are contributed to the knowledgebase via webform, allowing metadata validation. Data visualization tools linking to the knowledgebase enhance user interaction with content and accelerate phenotype development. The CIPHER knowledgebase was developed in the largest healthcare system in the United States and piloted with external partners. The design of the CIPHER website supports a variety of front-end tools and features to facilitate phenotype development and reuse. Health data users are encouraged to contribute their algorithms to the knowledgebase for wider dissemination to the research community, and to use the platform as a springboard for phenotyping. CIPHER is a public resource for all health data users available at https://phenomics.va.ornl.gov/ which facilitates phenotype reuse, development, and dissemination of phenotyping knowledge.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1998

User Directed Tools for Exploiting Expert Knowledge in an Immersive Segmentation and Visualization Environment

Volumetric data sets have become common in medicine and many sciences through technologies such as computed x-ray tomography (CT), magnetic resonance (MR), positron emission tomography (PET), confocal microscopy and 3D ultrasound. When presented with 2D images humans immediately and unconsciously begin a visual analysis of the scene. The viewer surveys the scene identifying significant landmarks and building an internal mental model of presented information. The identification of features is strongly influenced by the viewers expectations based upon their expert knowledge of what the image should contain. While not a conscious activity, the viewer makes a series of choices about how to interpret the scene. These choices occur in parallel with viewing the scene and effectively change the way the viewer sees the image. It is this interaction of viewing and choice which is the basis of many familiar visual illusions. This is especially important in the interpretation of medical images where it is the expert knowledge of the radiologist which interprets the image. For 3D data sets this interaction of view and choice is frustrated because choices must precede the visualization of the data set. It is not possible to visualize the data set with out making some initial choices which determine how the volume of data is presented to the eye. These choices include, view point orientation, region identification, color and opacity assignments. Further compounding the problem is the fact that these visualization choices are defined in terms of computer graphics as opposed to language of the experts knowledge. The long term goal of this project is to develop an environment where the user can interact with volumetric data sets using tools which promote the utilization of expert knowledge by incorporating visualization and choice into a tight computational loop. The tools will support activities involving the segmentation of structures, construction of surface meshes and local filtering of the data set. To conform to this environment tools should have several key attributes. First, they should be only rely on computations over a local neighborhood of the probe position. Second, they should operate iteratively over time converging towards a limit behavior. Third, they should adapt to user input modifying they operational parameters with time.

Senger, Steven O.↗
NASA NTRS1992

Effects of gravitoinertial force variations on optokinetic nystagmus and on perception of visual stimulus orientation

Recordings of horizontal and vertical eye movement were obtained with subjects exposed to vertical, horizontal, and oblique optokinetic stimulation during parabolic flight. When the optokinetic stimulation was vertical, the upward slow phase eye velocity increased increased during transition from high force level to free-fall, and decreased during transition from free-fall to high force level. During optokinetic stimulation in the horizontal and oblique plane, the gravitoinertial forces of parabolic flight induced changes in the velocity of the vertical component of the eye movements, and, therefore, changes in the plane of the eye movements. Some subjects also preceived modifications in the apparent orientation of the visual motion. These findings are in agreement with previous observations on the presence of a vertical nystagmus induced by changes in plane vertical acceleration. They also suggest a close interaction of reflexive eye movements induced by graviceptor inputs and visual inputs for visual stabilization during variations of gravitoinertial force level.

Clement, Gilles↗
NASA NTRS1989

Visualization of three-dimensional CFD solutions

The implementation is described of the FLOWVIS flow visualization package on a graphics supercomputer that provides real-time interactive investigation of three-dimensional CFD solutions on structured and unstructured meshes. The data structures are briefly described and the methods of visualizing flow fields are examined, including surface plots, particle paths, and planar displays in the flow field. Preliminary results using the package and work in progress are discussed.

Modiano, David L.↗
NASA NTRS1985

Near-infrared mapping of ARP 299 (IC 694-NGC 3690) - Colliding galaxies unveiled

Near-infrared maps and multicolor photometry of the interacting galaxies IC 694 and NGC 3690 which form Arp 299 (= Markarian 171) are presented. These data reveal for the first time the distribution of nuclei and old red stars in a cataclysmically interacting system. The nuclei are considerably offset from the visual centroids of the galaxies but not from the mass centroids. The near-infrared colors of the most active regions are strongly affected by extinction, emission form hot dust, and bremsstrahlung. Near-infrared emission is also identified with secondary regions of star formation, probably resulting from the galaxies' interaction.

Telesco, C. M.↗
NASA NTRS1986

Base pairing and base mis-pairing in nucleic acids

In recent years we have learned that DNA is conformationally active. It can exist in a number of different stable conformations including both right-handed and left-handed forms. Using single crystal X-ray diffraction analysis we are able to discover not only additional conformations of the nucleic acids but also different types of hydrogen bonded base-base interactions. Although Watson-Crick base pairings are the predominant type of interaction in double helical DNA, they are not the only types. Recently, we have been able to examine mismatching of guanine-thymine base pairs in left-handed Z-DNA at atomic resolution (1A). A minimum amount of distortion of the sugar phosphate backbone is found in the G x T pairing in which the bases are held together by two hydrogen bonds in the wobble pairing interaction. Because of the high resolution of the analysis we can visualize water molecules which fill in to accommodate the other hydrogen bonding positions in the bases which are not used in the base-base interactions. Studies on other DNA oligomers have revealed that other types of non-Watson-Crick hydrogen bonding interactions can occur. In the structure of a DNA octamer with the sequence d(GCGTACGC) complexed to an antibiotic triostin A, it was found that the two central AT base pairs are held together by Hoogsteen rather than Watson-Crick base pairs. Similarly, the G x C base pairs at the ends are also Hoogsteen rather than Watson-Crick pairing. Hoogsteen base pairs make a modified helix which is distinct from the Watson-Crick double helix.

Wang, A. H. J.↗
NASA NTRSDate not supplied

Analysis and Prediction of VFR Vs IFR Traffic Behavior to Support Uncrewed Aircraft Flight Operations at Regional Airports

Uncrewed Aircraft flight operations at a regional airport will be affected by the uncertainty in the Visual Flight Rules traffic around. This paper analyzes Visual Flight Rules traffic behavior, compares it with Instrument Flight Rules traffic and develops traffic prediction methods to support uncrewed aircraft flight operations. The spatio-temporal distribution of traffic operating under Visual Flight Rules and Instrument Flight Rules was analyzed from one month of historical track data around Fort Worth Alliance airport as a representative regional airport. The traffic behavior was visualized as occupancy maps generated at different altitudes. The Instrument Flight Rules traffic was concentrated in fewer regions of the airspace along structured routes where the risk of interacting with one or more flights reached close to fifty percent in some areas. Visual Flight Rules traffic was spread over more regions, mostly segregated from the Instrument Flight Rules regions, and the risk of interaction was lower reaching up to twenty-five percent on average over the month in some regions. The interaction risk was predicted using predictive occupancy maps over multiple time horizons and conditioned on time and partial observation of traffic in the vicinity. The month-to-month predictability of Visual Flight Rules risk was lower than that of the Instrument Flight Rules traffic, consistently over all the conditions analyzed. However, the prediction and its accuracy were demonstrated to be sensitive to the conditions used. The predictive models generated can be used to support both strategic planning and in-flight decision-making by uncrewed aircraft during flight operations while maintaining an acceptable risk of interacting with other traffic.

VFR↗
NASA NTRSDate not supplied

Analysis and Prediction of VFR Vs IFR Traffic Behavior to Support Uncrewed Aircraft Flight Operations at Regional Airports

Uncrewed Aircraft flight operations at a regional airport will be affected by the uncertainty in the Visual Flight Rules traffic around. This paper analyzes Visual Flight Rules traffic behavior, compares it with Instrument Flight Rules traffic and develops traffic prediction methods to support uncrewed aircraft flight operations. The spatio-temporal distribution of traffic operating under Visual Flight Rules and Instrument Flight Rules was analyzed from one month of historical track data around Fort Worth Alliance airport as a representative regional airport. The traffic behavior was visualized as occupancy maps generated at different altitudes. The Instrument Flight Rules traffic was concentrated in fewer regions of the airspace along structured routes where the risk of interacting with one or more flights reached close to fifty percent in some areas. Visual Flight Rules traffic was spread over more regions, mostly segregated from the Instrument Flight Rules regions, and the risk of interaction was lower reaching up to twenty-five percent on average over the month in some regions. The interaction risk was predicted using predictive occupancy maps over multiple time horizons and conditioned on time and partial observation of traffic in the vicinity. The month-to-month predictability of Visual Flight Rules risk was lower than that of the Instrument Flight Rules traffic, consistently over all the conditions analyzed. However, the prediction and its accuracy were demonstrated to be sensitive to the conditions used. The predictive models generated can be used to support both strategic planning and in-flight decision-making by uncrewed aircraft during flight operations while maintaining an acceptable risk of interacting with other traffic.

VFR↗
DOE OSTI2020

Electrostatic Barriers to Nanoparticle Accessibility of a Porous Matrix

Translocation from one cavity to another through a narrow constriction (i.e., a “hole”) represents the fundamental elementary process underlying hindered mass transport of nanoparticles and macromolecules within many natural and synthetic porous materials, including intracellular environments. This process is complex and may be influenced by long-range (e.g., electrostatic) particle–wall interactions, transient adsorption/desorption, surface diffusion, and hydrodynamic effects. In this study, we used a three-dimensional (3D) tracking method to explicitly visualize the process of nanoparticle diffusion within periodic porous nanostructures, where electrostatic interactions were mediated via ionic strength. The effects of electrostatic interactions on nanoparticle transport were surprisingly large. For example, an increase in the Debye length of only a few nanometers (in a material with a hole diameter of ~100 nm) increased the mean cavity escape time 3-fold. A combination of computational and experimental analyses indicated that this hindered cavity escape was due to an electrostatic energy barrier in the region of the hole, which was quantitatively explained using DLVO theory. These findings explicitly demonstrate that the cavity escape process was barrier-limited and dominated by electrostatic effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Design and evaluation of alphabetic and numeric input methods for virtual reality

In today’s virtual reality (VR), users have various ways to influence their VR experience, including alphanumeric input. While typing characters and numbers is straightforward on desktop computers, it presents challenges and opportunities in head-mounted display VR due to specific interaction methods and a lack of real-world visual stimuli. Addressing these open questions, our work implements and evaluates ten approaches to alphabetic and numeric inputs in VR. Here, we describe the design motivation behind these input methods and evaluate them in a user study with 40 participants divided into groups for alphabetic and numeric keyboards. This comparison investigates each method’s performance and user interactions. Our findings suggest that different input methods significantly impact words per minute and error rates, and that certain keyboard designs may receive better subjective evaluations despite poorer objective performance.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Immersive Digital Twin Laboratory for Engineering Education (CRADA Final Report)

This project aimed to create an immersive digital twin laboratory that incorporates advanced tracking and visualization capabilities. In collaboration with Fort Lewis College, NREL designed a state-of-the-art physical visualization laboratory, developed a software platform to enable interaction with tracked physical objects in the laboratory, and provided proof-of-concept curricula that included manipulating these tracked objects. The project was initiated to address the growing need for innovative educational tools in engineering education. As renewable energy systems, particularly solar installations, become more complex, there is a pressing need to bridge the gap between theoretical knowledge and practical application. Traditional methods of teaching solar engineering concepts often fall short of providing students with a comprehensive, hands-on understanding. This immersive digital twin laboratory was conceived to fill that gap by creating a safe, non-energized setting where students can interact with augmented solar installation objects, gaining valuable insights into system performance, design, and maintenance. The project utilized extended reality (XR) technologies, including head-mounted displays (HMDs) and a whole-room optical motion tracking system, to connect physical objects with their digital twins in real time. The laboratory was equipped with MagicLeap 2 HMDs, supported by a Vicon Vero 2.2 Optical Tracking System, which provided precise 6-degrees-of-freedom (6-DOF) tracking. We developed a software platform to manage the interaction between the tracked physical objects and their virtual counterparts, enabling real-time data synchronization, object recognition, and virtual overlays. We designed the system to be flexible and extendable, allowing for future integration of additional objects and curriculum. This research advances the field of engineering education by demonstrating the potential of immersive digital twin environments. The laboratory provides a dynamic learning space where students can experiment, collaborate, and learn without the risks associated with live experimentation. The ability to simulate and manipulate solar installation objects under various conditions has broad implications for workforce development, particularly in renewable energy. The project also highlights the economic feasibility of using XR technologies in educational settings, offering a cost-effective solution for institutions looking to enhance their curriculum. By fostering a deeper understanding of solar energy systems, this work contributes to the broader goal of supporting the global energy transition and preparing the next generation of engineers and technicians.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1999

Visualization Co-Processing of a CFD Simulation

OVERFLOW, a widely used CFD simulation code, is combined with a visualization system, pV3, to experiment with an environment for simulation/visualization co-processing on a SGI Origin 2000 computer(O2K) system. The shared memory version of the solver is used with the O2K 'pfa' preprocessor invoked to automatically discover parallelism in the source code. No other explicit parallelism is enabled. In order to study the scaling and performance of the visualization co-processing system, sample runs are made with different processor groups in the range of 1 to 254 processors. The data exchange between the visualization system and the simulation system is rapid enough for user interactivity when the problem size is small. This shared memory version of OVERFLOW, with minimal parallelization, does not scale well to an increasing number of available processors. The visualization task takes about 18 to 30% of the total processing time and does not appear to be a major contributor to the poor scaling. Improper load balancing and inter-processor communication overhead are contributors to this poor performance. Work is in progress which is aimed at obtaining improved parallel performance of the solver and removing the limitations of serial data transfer to pV3 by examining various parallelization/communication strategies, including the use of the explicit message passing.

Vaziri, Arsi↗
NASA NTRS1993

Visual display aid for orbital maneuvering - Design considerations

This paper describes the development of an interactive proximity operations planning system that allows on-site planning of fuel-efficient multiburn maneuvers in a potential multispacecraft environment. Although this display system most directly assists planning by providing visual feedback to aid visualization of the trajectories and constraints, its most significant features include: (1) the use of an 'inverse dynamics' algorithm that removes control nonlinearities facing the operator, and (2) a trajectory planning technique that separates, through a 'geometric spreadsheet', the normally coupled complex problems of planning orbital maneuvers and allows solution by an iterative sequence of simple independent actions. The visual feedback of trajectory shapes and operational constraints, provided by user-transparent and continuously active background computations, allows the operator to make fast, iterative design changes that rapidly converge to fuel-efficient solutions. The planning tool provides an example of operator-assisted optimization of nonlinear cost functions.

Grunwald, Arthur J.↗
NASA NTRS1992

Unsteady wing surface pressures in the wake of a propeller

The unsteady nature of the propeller slipstream interacting with a wing has been studied by flow visualization and unsteady wing surface pressure measurements. Flow visualization was performed by marking the propeller tip vortex with smoke. Unsteady wing surface pressures were measured by traversing a wing instrumented with a chordwise array of 16 microphones in a spanwise direction through the propeller wake. This work yielded information on the motion of the propeller wake as it passes over the wing. As the propeller wake passed over the wing: the propeller tip vortex experienced an inviscid interaction at the leading edge; viscous action at the leading edge severed the propeller tip vortex; the propeller tip vortex experienced significant spanwise and chordwise displacements and then deformed in order to reconnect at the trailing edge; axial velocity in the vortex core caused the helical vortex to thicken or stretch near the wing surface; and, the magnitude of the pressure fluctuations decreased in magnitude with distance traveled along the chord.

Johnston, R. T.↗
NASA NTRS2021

Teleoperation and Visualization Interfaces for Remote Intervention in Space

Approaches to robotic manufacturing, assembly, and servicing of in-space assets range from autonomous operation to direct teleoperation, with many forms of semi-autonomous teleoperation in between. Because most approaches require one or more human operators at some level, it is important to explore the control and visualization interfaces available to those operators, taking into account the challenges due to significant telemetry time delay. We consider one motivating application of remote teleoperation, which is ground-based control of a robot on-orbit for satellite servicing. This paper presents a model-based architecture that: 1) improves visualization and situation awareness, 2) enables more effective human/robot interaction and control, and 3) detects task failures based on anomalous sensor feedback. We illustrate elements of the architecture by drawing on 10 years of our research in this area. The paper further reports the results of several multi-user experiments to evaluate the model-based architecture, on ground-based test platforms, for satellite servicing tasks subject to round-trip communication latencies of several seconds. The most significant performance gains were obtained by enhancing the operators’ situation awareness via improved visualization and by enabling them to precisely specify intended motion. In contrast, changes to the control interface, including model-mediated control or an immersive 3D environment, often reduced the reported task load but did not significantly improve task performance. Considering the challenges of fully autonomous intervention, we expect that some form of teleoperation will continue to be necessary for robotic in-situ servicing, assembly, and manufacturing tasks for the foreseeable future. We propose that effective teleoperation can be enabled by modeling the remote environment, providing operators with a fused view of the real environment and virtual model, and incorporating interfaces and control strategies that enable interactive planning, precise operation, and prompt detection of errors.

space robotics↗