SEARCH · Engineering Papers

Results for “Infrared techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Signal processing applied to photothermal techniques for materials characterization

There is a need to make noncontact measurements of material characteristics in the microgravity environment. Photothermal and photoacoustics techniques offer one approach for attaining this capability since lasers can be used to generate the required thermal or acoustic signals. The perturbations in the materials that can be used for characterization can be detected by optical reflectance, infrared detection or laser detection of photoacoustics. However, some of these laser techniques have disadvantages of either high energy pulsed excitation or low signal-to-noise ratio. Alternative signal processing techniques that have been developed can be applied to photothermal or photoacoustic instrumentation. One fully coherent spread spectrum signal processing technique is called time delay spectrometry (TDS). With TDS the system is excited using a combined frequency-time domain by employing a linear frequency sweep excitation function. The processed received signal can provide either frequency, phase or improved time resolution. This signal processing technique was shown to outperform other time selective techniques with respect to noise rejection and was recently applied to photothermal instrumentation. The technique yields the mathematical equivalent of pulses yet the input irradiances are orders of magnitude less than pulses with the concomitant reduction in perturbation of the sample and can increase the capability of photothermal methods for materials characterization.

Rooney, James A.↗

NASA NTRS1981

Infrared experiments for spaceborne planetary atmospheres research. Executive summary

The role of 0.5 to 300 micron remote sensing in planetary atmospheres exploration was evaluated by examining a broad range of measurement techniques including quantitative intercomparisons of existing and planned instruments by the phenomenological method. Key areas of infrared instrumentation requiring development for the investigations of atmospheres were identified.

Source record↗

NASA NTRS1985

The 8.3 and 12.4 micron imaging of the Galactic Center source complex with the Goddard infrared array camera

A 30 x 30 arcsec field at the Galactic Center (1.5 x 1.5 parsec) was mapped at 8.3 microns and 12.41 microns with high spatial resolution and accurate relative astrometry, using the 16 x 16 Si:Bi accumulation mode charge injection device Goddard infrared array camera. The design and performance of the array camera detector electronics system and image data processing techniques are discussed. Color temperature and dust opacity distributions derived from the spatially accurate images indicate that the compact infrared sources and the large scale ridge structure are bounded by warmer, more diffuse material. None of the objects appear to be heated appreciably by internal luminosity sources. These results are consistent with the model proposing that the complex is heated externally by a strong luminosity source at the Galactic Center, which dominates the energetics of the inner few parsecs of the galaxy.

Gezari, D. Y.↗

NASA NTRS1985

8.3 and 12.4 micron imaging of the Galactic Center source complex with the Goddard infrared array camera

Gezari, D. Y.↗

NASA NTRS2015

A Fast Visible-Infrared Imaging Radiometer Suite Simulator for Cloudy Atmopheres

A fast instrument simulator is developed to simulate the observations made in cloudy atmospheres by the Visible Infrared Imaging Radiometer Suite (VIIRS). The correlated k-distribution (CKD) technique is used to compute the transmissivity of absorbing atmospheric gases. The bulk scattering properties of ice clouds used in this study are based on the ice model used for the MODIS Collection 6 ice cloud products. Two fast radiative transfer models based on pre-computed ice cloud look-up-tables are used for the VIIRS solar and infrared channels. The accuracy and efficiency of the fast simulator are quantify in comparison with a combination of the rigorous line-by-line (LBLRTM) and discrete ordinate radiative transfer (DISORT) models. Relative errors are less than 2 for simulated TOA reflectances for the solar channels and the brightness temperature differences for the infrared channels are less than 0.2 K. The simulator is over three orders of magnitude faster than the benchmark LBLRTM+DISORT model. Furthermore, the cloudy atmosphere reflectances and brightness temperatures from the fast VIIRS simulator compare favorably with those from VIIRS observations.

VIIRS Instrument Simulator↗

NASA NTRS1980

Satellite ozone measurements

Since 1960 three classes of zone sounders have been developed: (1) backscatter ultraviolet, (2) infrared limb and nadir radiance, and (3) stellar and solar occultation methods. With these techniques ozone has been measured from 20 to 100 km. Tropospheric ozone measurements are beyond present technology, but total ozone is determined with the backscatter ultraviolet and nadir infrared methods.

Krueger, A. J.↗

NASA NTRS2014

A Super-Resolution Laser Altimetry Concept

A super-resolution laser altimetry technique has been proposed to provide improved lidar altimetry from Cloud Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) lidar data, and it is applicable to other similar atmospheric profiling lidar with low-pass filters. To achieve high altimetry resolution, the new technique relies on an empirical relationship between the peak signal ratio and the distance between land surface and the peak signal range bin center, which is directly derived from the CALIPSO lidar measurements and does not require the CALIPSO's transient response. The CALIPSO surface elevation results in Northern America retrieved by the new technique agree with the National Elevation Database high resolution elevation maps, and the comparisons suggest that the precision of the technique is much better than 1.4 m. The preliminary data product of land surface elevation retrieved by the new technique from CALIPSO lidar measurements is available to the altimetry community for evaluation.

Lu, Xiaomei↗

NASA NTRSDate not supplied

TPSAS-NF1676L-32030-DND

Composite structures are often difficult to inspect due to the anisotropic nature of the material systems and the range of flaws and defects that can arise in the manufacturing process. NASA?s Advanced Composites Project, a public-private partnership between government, universities and industry, seeks to address improved methods, tools, and protocols to reduce the development and certification timeline for composite materials and structures. The rapid inspection of composites is one of the three focused research areas of the project. One deliverable of the project is to develop an NDE Methods and Capabilities Handbook. This Handbook provides a publically available guidance document that facilitates the selection of appropriate NDE techniques and provides recommended protocols for detecting and characterizing common flaw types in solid laminate polymer matrix composite (PMC) structures. The Handbook will reduce the time required to develop qualified inspection processes for composite aircraft structures during the development, certification, and manufacturing phases by providing a reference that helps minimize trial and error and provides guidance on best practices, techniques, and settings, for specific flaw types and geometries. The Handbook will include an NDE Guidance Matrix that provides an applicability rating for NDE techniques as they apply to given flaw types. NDE techniques will include, but is not limited to ultrasound, laser based ultrasound, infrared thermography, and x-ray CT. Flaw types will include, but are not limited to porosity, delamination, voids, AFP defects and impact damage. The Handbook will contain details that support the applicability rating including, but not limited to, specimen details, inspection parameters, data analysis techniques, inspection efficiency (speed & cost), and limitations. This presentation will describe key Handbook activities with examples of the techniques and flaw types examined by the Advanced Composite Consortium members.

Patricia A Howell↗

NASA NTRS2001

Intercalibration of Meteorological Satellite Imagers Using VIRS, ATSR-2 and MODIS

Global retrievals of surface, cloud and radiative properties from geostationary (GEO) and low-Earth-orbit (LEO) meteorological satellites require accurate calibration of their imagers. An accurate and consistent calibration increases the reliability and effectiveness of long-term monitoring of climate changes. More emphasis has been placed on calibrating the thermal infrared (IR) channel. The lack of on-board calibration in the visible (VIS) channel has prompted efforts to characterize the degradation of the VIS sensor using vicarious post-launch calibration techniques that measure bright stable desert targets from space and aircraft or using satellite-to-satellite normalizations. While such inter-calibrations are valuable and widely used, the lack of a well-characterized calibration reference source and the lengthy time delay between updates have minimized their effectiveness in climate monitoring. To address these shortcomings, this paper examines the use of research satellite imagers to provide stable calibration references for the visible (VIS, approximately 0.65 micrometers) channels and develops a method for rapid intercalibration of existing satellites. Calibration coefficients are determined for the Geostationary Operational Environmental Satellites (GOES-8 to GOES-10), Geostationary Meteorological Satellite (GMS-5), Meteosat-7, and the NOAA-14 Advanced Very High Resolution Radiometer (AVHRR). As a reference calibration source, this technique uses the self-calibrating sensors on the Tropical Rainfall Measuring Mission (TRMM) Visible Infrared Radiometers (VIRS) or the ERS-2 Along Track Scanning Radiometer (ATSR-2). GOES-8 is calibrated with VIRS and then its calibration is transferred to other GEO or LEO satellites. The absolute accuracy of this technique relies on the assumption that the on-board calibration is stable and well maintained. Minnis et al. assessed the VIRS calibration using comparisons with other self-calibrated satellite sensors including the broadband Clouds and Earth's Radiant Energy System (CERES) scanners, the ERS-2 Along Track Scanning Radiometer (ATSR-2), and the Terra Moderate-resolution Imaging Spectrometer (MODIS). Thus, the VIRS data can be confidently used as the initial reference source.

Nguyen, Louis↗

NASA NTRS2004

Spacecraft Cabin Atmospheric Major Constituent Monitoring Using Off-the-Shelf Techniques

Since the beginning of the crewed space exploration program, the National Aeronautics and Space Administration (NASA) recognized the need to monitor the composition of a spacecraft cabin atmosphere. Typically, major constituent monitoring has been limited to nitrogen, oxygen, carbon dioxide, and water vapor. For the International Space Station, mass spectroscopy was selected as the baseline technology for this task. Recently, new techniques for monitoring major atmospheric constituents have matured commercially making them viable for crewed spacecraft applications. These techniques have advantages over the mass spectroscopy and electrochemically-based instruments used on board the /SS and Shuttle. Fast laser diode oxygen analysis, solid-state infrared carbon dioxide detection, and thin-film capacitive humidity detection are among the emerging techniques. Representative instruments employing these techniques have been selected and tested to demonstrate their potential for crewed spacecraft applications. A summary of testing results is provided.

Perry, Jay L.↗

NASA NTRS1997

New tests of the common calibration context for ISO, IRTS, and MSX

The work carried out in order to test, verify and validate the accuracy of the calibration spectra provided to the Infrared Space Observatory (ISO), to the Infrared Telescope in Space (IRTS) and to the Midcourse Space Experiment (MSX) for external calibration support of instruments, is reviewed. The techniques, used to vindicate the accuracy of the absolute spectra, are discussed. The work planned for comparing far infrared spectra of Mars and some of the bright stellar calibrators with long wavelength spectrometer data are summarized.

Cohen, Martin↗

NASA NTRS1998

Fifteen Years of Laboratory Astrophysics at Ames

Tremendous strides have been made in our understanding of interstellar material over the past fifteen years thanks to significant, parallel developments in two closely related areas: observational astronomy and laboratory astrophysics. Fifteen years ago the composition of interstellar dust was largely guessed at, the concept of ices in dense molecular clouds ignored, and the notion of large, abundant, gas phase, carbon-rich molecules widespread throughout the interstellar medium (ISM) considered impossible. Today the composition of dust in the diffuse ISM is reasonably well constrained to cold refractory materials comprised of amorphous and crystalline silicates mixed with an amorphous carbonaceous material containing aromatic structural units and short, branched aliphatic chains. In the dense ISM, these cold dust particles are coated with mixed-molecular ices whose compositions are very well known. Lastly, the signature of carbon-rich polycyclic aromatic hydrocarbons (PAHs), shockingly large molecules by early interstellar chemistry standards, is widespread throughout the ISM. This great progress has only been made possible by the close collaboration of laboratory experimentalists with observers and theoreticians, all with the goal of applying their skills to astrophysical problems of direct interest to NASA programs. Such highly interdisciplinary collaborations ensure fundamental, in depth coverage of the wide-ranging challenges posed by astrophysics. These challenges include designing astrophysically focused experiments and data analysis, tightly coupled with astrophysical searches spanning 2 orders of magnitude in wavelength, and detailed theoretical modeling. The impact of our laboratory has been particularly effective as there is constant cross-talk and feedback between quantum theorists; theoretical astrophysicists and chemists; experimental physicists; organic, physical and petroleum chemists; and infrared and UV/Vis astronomers. In this paper, two examples of the Ames Program will be given. We have been involved in identifying 9 out of the 14 interstellar pre-cometary ice species known, determined their abundances and the physical nature of the ice structure. Details on our ice work are given in the paper by Sandford et al. Our group is among the pioneers of the PAH model. We built the theoretical framework, participated in the observations and developed the experimental techniques needed to test the model. We demonstrated that the ubiquitous infrared emission spectrum associated with many interstellar objects can be matched by laboratory spectra of neutral and positively charged PAHs and that PAHs were excellent candidates for the diffuse interstellar band (DIB) carriers. See Salama et al. and Hudgins et al.

Allamandola, L. J.↗

NASA NTRS1987

Exploiting the IR: Solar and stellar spectroscopy in the IR

Recent instrumental advances have provided the capability to perform high resolution spectroscopy, in the thermal infrared region of the solar spectrum, with high sensitivity. The 8 to 12 micron region was extensively observed using Fourier transform (FTS) and laser heterodyne techniques. The continuous opacity of the solar atmosphere, due to H(-), increases with wavelength in the infrared region longward of 1.6 microns. Consequently thermal infrared observations probe the upper photosphere, and give an insight into the dynamics and structure of this region. The most notable spectral features in the 10 micron window include pure rotation lines of OH, and emission lines due to high-n states in MgI and AlI. The high-n lines due to MgI and AlI are important to solar and stellar physics because of their very large Zeeman sensitivity. The recent development of a cryogenic grating postdispenser for the FTS has allowed low-noise solar observations of these lines in 90 seconds. Limited mapping of the lines in a sunspot penumbra was performed, and gives information of the structure of the penumbral magnetic field. Although the MgI lines were detected in red giant spectra, instrumental sensitivity is not yet sufficient to see them in stars where significant magnetic fields are expected.

Deming, Drake↗

NASA NTRS1974

An interdisciplinary analysis of multispectral satellite data for selected cover types in the Colorado Mountains, using automatic data processing techniques

The author has identified the following significant results. The utility of the middle infrared portion of the spectrum for snow cover mapping has been demonstrated. Also, the S-192 thermal band seems to have a higher thermal detectivity than previously estimated and predicted.

Hoffer, R. M.↗

NASA NTRS1977

Accurate spectral modeling for infrared radiation

Direct line-by-line integration and quasi-random band model techniques are employed to calculate the spectral transmittance and total band absorptance of 4.7 micron CO, 4.3 micron CO2, 15 micron CO2, and 5.35 micron NO bands. Results are obtained for different pressures, temperatures, and path lengths. These are compared with available theoretical and experimental investigations. For each gas, extensive tabulations of results are presented for comparative purposes. In almost all cases, line-by-line results are found to be in excellent agreement with the experimental values. The range of validity of other models and correlations are discussed.

Tiwari, S. N.↗

NASA NTRS1983

Testing and characterizations of infrared sensor over the temperature range of 2 Kelvin to 300 Kelvin

Various cryogenic techniques were used to evaluate state of the art electro-optic devices. As research, development, and production demands require more sensitive testing techniques, faster test results, and higher production throughput, the emphasis on supporting cryogenic systems increases. The three traditional methods currently utilized in electro-optic device testing are discussed: (1) liquid contaiment dewars; (2) liquid transfer systems; and (3) closed cycle refrigeration systems. Advantages, disadvantages, and the current state of the art of each of these cryogenic techniques is discussed.

Hansen, R. G.↗

NASA NTRS1985

Blended SST fields combined SMMR/ship data (summary of technique)

All remote sensors have bias problems which vary in space and time. The infrared measurements are very sparse in cloudy areas: the SMMR has coverage limitations due to the interference of land areas and only half time operation. If one simply averaged the data from these various sources, the combination of the biases and varying sampling would introduce artifacts into the analyzed product which would reflect the sampling and which could be quite misleading. The remote sensors provide reasonable estimates of gradients of SST over length scales greater than the sensor resolution but smaller than hemispheric. Ships can be considered unbiased but are poorly distributed on small scales except in the densest shipping lanes. An analysis scheme based on a suggestion by Holl was developed which exploits just this approximately complementarity to provide an improved SST analysis. The resulting accuracy appears to be in the required approx. 0.5 C range for the particular case of using SMMR and ship data to produce two degree latitude by two degrees longitude monthly analyses.

Wilheit, T. T.↗

NASA NTRS1987

Infrared emission from young stars in the nucleus of M82

New observational and analytical techniques were used to obtain high-resolution NIR and FIR profiles of the luminous peculiar galaxy M82. The strongest NIR emission is found to be coincident with the dynamical center of the galaxy; a secondary NIR source, a factor of two fainter than the nucleus, is located 10 deg to the southewest. Simultaneous 40-micron and 100-micron profiles of M82 reveal an asymmetric distribution, with peak FIR emission diplaced about 5 arcsec to the west of center, and a plateau of emission extending about 5 arcsec to the east. The best positional determination indicates that the peak FIR emission from M82 is coincident with a cluster of young stars located to the southwest of the galactic nucleus at a projected distance of 10 arcsec (150 pc).

Joy, Marshall↗