Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ION MICROSCOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Evaluation of irradiation facility options for fusion materials research and development

Successful development of fusion energy will require the design of high-performance structural materials that exhibit dimensional stability and good resistance to fusion neutron degradation of mechanical and physical properties. The high levels of gaseous (H, He) transmutation products associated with deuterium-tritium (D-T) fusion neutron transmutation reactions, along with displacement damage dose requirements up to 50-200 displacements per atom (dpa) for a fusion demonstration reactor (DEMO), pose an extraordinary challenge. The intense neutron source(s) is needed to address two complimentary missions: 1) Scientific investigations of radiation degradation phenomena and microstructural evolution under fusion-relevant irradiation conditions (to provide the foundation for designing improved radiation resistant materials), and 2) Engineering database development for design and licensing of next-step fusion energy machines such as a fusion DEMO. A wide variety of irradiation facilities have been proposed to investigate materials science phenomena and to test and qualify materials for a DEMO reactor. Currently available and proposed facilities include fission reactors (including isotopic and spectral tailoring techniques to modify the rate of H and He production per dpa), dual- and triple-ion accelerator irradiation facilities that enable greatly accelerated irradiation studies with fusion-relevant H and He production rates per dpa within microscopic volumes, D-Li stripping reaction and spallation neutron sources, and plasma-based sources. The advantages and limitations of the main proposed fusion materials irradiation facility options are reviewed. Evaluation parameters include irradiation volume, potential for performing accelerated irradiation studies, capital and operating costs, similarity of neutron irradiation spectrum to fusion reactor conditions, temperature and irradiation flux stability/control, ability to perform multiple-effect tests (e.g., irradiation in the presence of a flowing coolant, or in the presence of complex applied stress fields), and technical maturity/risk of the concept. Ultimately, it is anticipated that heavy utilization of ion beam and fission neutron irradiation facilities along with sophisticated materials models, in addition to a dedicated fusion-relevant neutron irradiation facility, will be necessary to provide a comprehensive and cost-effective understanding of anticipated materials evolution in a fusion DEMO and to therefore provide a timely and robust materials database.

embrittlement↗

Web-based Preprocessing and Visualization of 3D FIB Tomography Data for Nuclear Fuel Characterization

Three-dimensional (3D) focused ion beam (FIB) tomography enables reconstruction of internal nuclear fuel features that can't be fully evaluated through surface imaging alone. This capability supports characterization of fuel constituents and defects under thermal and irradiation conditions relevant to microreactor development. However, large tomography datasets can create data-handling, loading, and visualization challenges, especially when image-stack preparation and file conversion must be completed with separate tools. The Computational Ultraspatial Tomography Toolkit for High-Resolution Object Analysis Tools (CUTTRHOAT) is an open-source web application being developed to display FIB tomography datasets available through the Nuclear Research Data System (NRDS). The current alpha version requires prepared HDF5 datasets and has limited integrated data-preparation capabilities. This project improves CUTTHROAT by adding dataset-folder selection, automatic input detection, dataset scanning, missing-slice identification, blank-slice insertion, and image-stack-to-HDF5 conversion. Two applications will be compared: the baseline CUTTHROAT alpha workflow and the updated application containing the integrated data-handling and preprocessing functions. Evaluation will consider dataset detection accuracy, conversion success, loading time, rendering responsiveness, application stability, and user interaction. Preliminary results demonstrate successful loading of existing HDF5 files and converted image stacks, while testing also identified performance reductions caused by excessive blank-slice generation. The updated workflow reduces reliance on external preparation tools and supports more direct movement from image stacks to color-code 3D visualization. Future work includes refining missing-slice handling, integrating additional preprocessing functions, like a denoising feature, parsing TIFF metadata for automatic voxel scaling, and adding manual X, Y, and Z voxel-spacing inputs for PNG and JPEG.

36 - MATERIALS SCIENCE↗

Quadrupole-mediated dielectric response and the charge-asymmetric solvation of ions in water

Treating water as a linearly responding dielectric continuum on molecular length scales allows very simple estimates of the solvation structure and thermodynamics for charged and polar solutes. While this approach can successfully account for basic length and energy scales of ion solvation, computer simulations indicate not only its quantitative inaccuracies but also its inability to capture some basic and important aspects of microscopic polarization response. Here, we consider one such shortcoming, a failure to distinguish the solvation thermodynamics of cations from that of otherwise-identical anions, and we pursue a simple, physically inspired modification of the dielectric continuum model to address it. The adaptation is motivated by analyzing the orientational response of an isolated water molecule whose dipole is rigidly constrained. Its free energy suggests a Hamiltonian for dipole fluctuations that accounts implicitly for the influence of higher-order multipole moments while respecting constraints of molecular geometry. Finally, we propose a field theory with the suggested form, whose nonlinear response breaks the charge symmetry of ion solvation. An approximate variational solution of this theory, with a single adjustable parameter, yields solvation free energies that agree closely with simulation results over a considerable range of solute size and charge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Micromechanical and in situ shear testing of Al–SiC nanolaminate composites in a transmission electron microscope (TEM)

Nanolaminate composites show promise as high strength and toughness materials. Still, due to the limited volume of these materials, micron scale mechanical testing methods must be used to determine the properties of these films. To this end, a novel approach combining a double notch shear testing geometry and compression with a flat punch in a nanoindenter was developed to determine the mechanical properties of these films under shear loading. To further elucidate the failure mechanisms under shear loading, in situ TEM experiments were performed using a double notch geometry cut into the TEM foil. Aluminum layer thicknesses of 50nm and 100nm were used to show the effect of constraint on the deformation. Higher shear strength was observed in the 50 nm sample (690±54 MPa) compared to the 100 nm sample (423±28.7 MPa). Additionally, failure occurred along the Al-SiC interface in the 50 nm sample as opposed to failure within the Al layer in the 100 nm sample.

36 MATERIALS SCIENCE↗

Defect microstructural evolution in ion irradiated metallic nanofoils: Kinetic Monte Carlo simulation versus cluster dynamics modeling and in situ transmission electron microscopy experiments

Understanding materials degradation under intense irradiation is important for the development of next generation nuclear power plants. Here we demonstrate that defect microstructural evolution in molybdenum nanofoils in situ irradiated and observed on a transmission electron microscope can be reproduced with high fidelity using an object kinetic Monte Carlo (OKMC) simulation technique. Main characteristics of defect evolution predicted by OKMC, namely, defect density and size distribution as functions of foil thickness, ion fluence and flux, are in excellent agreement with those obtained from the in situ experiments and from previous continuum-based cluster dynamics modeling. The combination of advanced in situ experiments and high performance computer simulation/modeling is a unique tool to validate physical assumptions/mechanisms regarding materials response to irradiation, and to achieve the predictive power for materials stability and safety in nuclear facilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural strain mapping during in-situ cyclic testing of ductile iron

Highlights: • A method for quantitative study of crack formation and propagation during cyclic loading was developed. • Focused Ion Beam Milling was shown to be an effective method to generate a high quality speckle pattern for Digital Image Correlation measurements • The method enabled a high-resolution measurement of localized strain in the microstructure of ductile iron • The peak strain and the strain distribution ahead of the growing crack under load were quantified - Abstract: This paper focuses on local strain distribution in the microstructure of high silicon ductile iron during cyclic loading. In-situ cyclic test was performed on compact-tension (CT) samples inside the scanning electron microscope (SEM) to record the whole deformation and obtain micrographs for microstructural strain measurement by means of digital image correlation (DIC) technique. Focused ion beam (FIB) milling was used to generate speckle patterns necessary for DIC measurement. The equivalent Von Mises strain distribution was measured in the microstructure at the maximum applied load. The results revealed a heterogeneous strain distribution at the microstructural level with higher strain gradients close to the notch of the CT sample and accumulated strain bands between graphite particles. Local strain ahead of the early initiated micro-cracks was quantitatively measured, showing high strain localization, which decreased by moving away from the micro-crack tip. It could be observed that the peak of strain in the field of view was not necessarily located ahead of the micro-cracks tip which could be because of the (i) strain relaxation due to the presence of other micro-cracks and/or (ii) presence of subsurface microstructural features such as graphite particles that influenced the strain concentration on the surface.

36 MATERIALS SCIENCE↗

Immediate impact on the rim zone of cement based materials due to chemical attack

Cement based materials are in their widespread application fields exposed to various aqueous environments. This can lead to serious chemical changes affecting the durability of the materials. In particular in the context of service life prediction a detailed knowledge of the reaction mechanisms is a necessary base for the evaluation of the aggressivity of an aqueous medium and this is deduced commonly from long term investigations. However, these processes start immediately at the material/water-interface, when a cementitious system comes into contact with an aqueous solution, altering here the chemical composition and microstructure. This rim zone represents the first hurdle that has to be overcome by an attacking aqueous solution. Therefore, the properties of the surface near area should be closely associated with the further course of deterioration processes by reactive transport. In this context short term exposure experiments with hardened cement paste over 4 and 48 h have been carried out with demineralized water, hard tap water and different sulfate solutions. In order to investigate immediate changes in the near-surface region, depth profile cuts have been performed on the cement paste samples by means of focused ion beam preparation techniques. A scanning beam of Gallium ions is applied to cut a sharp edge in the cement paste surface, providing insights into the composition and microstructure of the upper ten to hundred microns. Electron microscopic investigations on such a section of the rim zone, together with surface sensitive X-ray diffraction accompanied by a detailed characterization of the bulk composition confirm that the properties of the material/water interface are of relevance for the durability of cement based systems in contact with aqueous solutions. In this manner, focused ion beam investigations constitute auspicious tools to contribute to a more sophisticated understanding of the reaction mechanisms. - Highlights: • The chemical stability is related to the properties of material/water interface. • Properties of the rim zone readjust quickly, triggered by hydrochemical conditions. • Durability research can be improved by combining FIB techniques and common analytics.

36 MATERIALS SCIENCE↗

Synthesis of nickel–zinc ferrite magnetic nanoparticle and dye degradation using photocatalytic ozonation

Graphical abstract: Display Omitted Highlights: ► Nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and characterized. ► Dye degradation by photocatalytic ozonation using NZFMN was studied. ► Formate, acetate and oxalate were detected as dominant dye degradation aliphatic intermediates. ► Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. ► NZFMN was an effective magnetic nanocatalyst to degrade dyes. -- Abstract: In this paper, nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and its dye degradation ability using photocatalytic ozonation was investigated. The NZFMN was characterized by X-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transforms infrared (FTIR) and alternative gradient force magnetometer (AGFM). Reactive Red 198 (RR198) and Direct Green 6 (DG6) were used as dye models. UV–vis and ion chromatography (IC) analyses were employed to study dye degradation. The effects of operational parameters on decolorization such as NZFMN dosage, dye concentration, salt and pH were studied. RR198 and DG6 were completely decolorized (100%) by photocatalytic ozonation using NZFMN. Formate, acetate and oxalate anions were detected as dominant aliphatic intermediates. Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. Results showed that the photocatalytic ozonation using NZFMN was a very effective method for dye degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New insights into the hydration of slag in alkaline media using a micro-reactor approach

A micro-reactor approach, developed previously, is used to study the reactions of slag in alkaline media. Micron-sized gaps are milled in slag grains using a focused ion beam (FIB) and subsequently filled with alkaline solutions, leading to dissolution and hydration of the slag. After the hydration is stopped, a scanning electron microscope (SEM) is used to image the gaps. We present the effect of pH and nature of the alkaline solution on the slag dissolution and the hydrate morphology. The results obtained in this study confirm that the presence of aluminum and calcium in solution has a strong retarding effect on the slag dissolution. A major implication of these results is that in blended cements, the reactivity of slag probably suffers from the ions released by cement into solution. We show that strongly adsorbing superplasticizers inhibit the dissolution of slag, but only at lower alkali concentrations and C–S–H seeds may also inhibit the dissolution of slag under certain experimental conditions. The obtained results are compared and contrasted with results obtained for alite and tricalcium silicate previously reported in the literature.

36 MATERIALS SCIENCE↗

Resolving discrepancies in the estimation of heavy quark transport coefficients in relativistic heavy-ion collisions

Heavy flavor observables provide valuable information on the properties of the hot and dense quark-gluon plasma (QGP) created in ultrarelativistic nucleus-nucleus collisions. Various microscopic models have successfully described many of the observables associated with its formation. Their transport coefficients differ, however, due to different assumptions about the underlying interaction of the heavy quarks with the plasma constituents, different initial geometries and formation times, different hadronization processes, and a different time evolution of the QGP. In this paper we present the transport coefficients of these models and investigate systematically how some of these assumptions influence the heavy quark properties at the end of the QGP expansion. For this purpose we impose on these models the same initial condition and the same model for the QGP expansion and show that both have considerable influence on R AA and v 2 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Examining the Critical Roles of Protons in Facilitating Oxidation of Chloride Ions by Permanganates: A Cluster Model Study

The oxidation power of permanganates (MnO4–) is known to be strongly dependent on pH values, and is greatly enhanced in acidic solutions, in which, for example, MnO4– can even oxidize Cl– ions to produce Cl2 molecules. Although such dependence has been ascribed due to the different reduced states of Mn affordable in different pH media, a molecular level understanding and characterization of initial redox pair complexes available in different pH solutions is very limited. Herein, we report a comparative study of [MnO4]– and [MnO4•Sol]– (Sol = H2O, KCl, and HCl) anion clusters by negative ion photoelectron spectroscopy (NIPES) and theoretical computations to probe chemical bonding and electronic structures of [MnO4•Sol]– clusters, aimed to obtain a microscopic understanding of how MnO4– interacts with surrounding molecules. Our study shows that H2O behaves as a solvent molecule, KCl is a spectator bound by pure electrostatic interactions, both of which do not influence the MnO4– identity in their respective clusters. In contrast, in [MnO4•HCl]–, the proton is found to interact with both MnO4– and Cl– with appreciable covalent characters, and the frontier MOs of the cluster are comprised of contributions from both MnO4– and Cl– moieties. Therefore the proton serves as a chemical bridge, bringing two negatively charged redox species together to form an intimate redox pair. By adding more H+ to MnO4–, the oxygen atom can be taken away in the form of a water molecule, leaving MnO4– as an electron deficient MnO3+ species, which can subsequently oxidize Cl– ions.

Environmental Molecular Sciences Laboratory↗

Topochemical Understanding of Lignin Distribution During Hydrothermal Flowthrough Pretreatment

Changes in surface properties during biomass pretreatments are important parameters to understand and engineer biological biomass conversion processes. In particular, different influences on the surface of biomass are expected between flowthrough and batch pretreatments. In this paper, for a better understanding of biomass surface changes by hydrothermal flowthrough pretreatment, the mechanism by which the surface of biomass is altered in terms of cellulose and lignin was investigated using time-of-flight secondary ion mass spectrometry (ToF-SIMS) and compared with the bulk chemical composition and the results from scanning electron microscope (SEM). ToF-SIMS analysis results provide semi-quantitative information of cellulose and lignin and support the other observation from SEM and bulk compositional analyses. In brief, more lignin was observed on the surface of biomass at the early stage hydrothermal pretreatment, while the lignin mainly located at the cell corners was reduced by extended pretreatment time. Finally, unlike batch pretreatment, pseudo-lignin formation was not observed on the poplar surface during the flowthrough process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microbe-Encapsulated Silica Gel Biosorbents for Selective Extraction of Scandium from Coal Byproducts

Establishing an inexpensive and environmentally friendly scandium (Sc) supply is critical for the development of clean energy technologies. However, refining Sc from Sc-bearing sources using current technologies poses economic and environmental challenges due to its low concentration relative to base metals and chemically similar lanthanides. In this work, we developed a biosorption-based flow-through process for extraction of Sc from low-grade feedstocks. A novel biosorbent material was synthesized by encapsulating Arthrobacter nicotianae, a bacterium that selectively adsorbs Sc, within a porous silica matrix. Through the use of several complementary microscopy techniques, we demonstrated a highly porous biosorbent structure with a high cell-loading density and a homogenous cell distribution. Batch adsorption assays revealed selective Sc adsorption over lanthanides and common based metals, with the exception of Fe(III), as evidenced by separation factors greater than 50. The MESG particles were packed into fixed-bed columns to enable adsorption under flow-through conditions, which demonstrated effective Sc extraction at flow rates up to 0.08 cm/s and high stability for reuse; greater than 95% of the adsorption capacity was maintained after 10 consecutive adsorption/desorption cycles. When applied to a lignite coal leachate, whose Fe content was depleted through pH-mediated precipitation, the MESG particles yielded Sc breakthrough at 30 bed volumes, whereas all other metals broke through after only a few bed volumes. Following desorption, an eluate with a 124-fold increase in Sc purity was achieved relative to the lignite leachate with Sc constituting 96.4% of the total REEs. This study established a rapid, facile, and scalable cell immobilization approach that enables the use of microbial biomass for Sc recovery from low-grade sources.

Dong, Ziye↗

Colossal mid-infrared bulk photovoltaic effect in a type-I Weyl semimetal

Broadband, efficient and fast conversion of light to electricity is crucial for sensing and clean energy. The bulk photovoltaic effect (BPVE) is a second-order nonlinear optical effect that intrinsically converts light into electrical current. We demonstrate a large mid-infrared BPVE in microscopic devices of the Weyl semimetal TaAs. This discovery results from combining recent developments in Weyl semimetals, focused-ion beam fabrication and theoretical works suggesting a connection between BPVE and topology. We also present a detailed symmetry analysis that allows us to separate the shift current response from photothermal effects. The magnitude and wavelength range of the assigned shift current may impact optical detectors, clean energy and topology, and demonstrate the utility of Weyl semimetals for practical applications.

36 MATERIALS SCIENCE↗

Determination of electronic band structure by electron holography of etched-and-regrown interfaces in GaN p-i-n diodes

The electrostatic potential variation across etched-and-regrown GaN p-i-n diodes for power electronics has been studied using electron holography in a transmission electron microscope. The potential profiles have been correlated with the composition profiles of Mg, Si, and O obtained by secondary ion mass spectroscopy. Electronic charges obtained from the potential profiles correlate well with the presence of Si and O impurities at regrown interfaces. The overlap of Mg and Si when Mg doped GaN is grown directly over an etched undoped GaN surface results in the formation of a highly doped p-n junction. The introduction of a thin undoped layer over the etched GaN surface prevents the formation of such a junction as the regrowth interface is moved away from the Mg-doped GaN, and results in diodes with improved reverse leakage currents, close to the best values of continuously grown p-i-n diodes. Potential profiles of continuously grown (not etched) p-i-n diodes are compared to those of etched-and-regrown diodes.

Alugubelli, Shanthan R. (ORCID:000000020202727X)↗

Effects of low-energy electron irradiation on formation of nitrogen–vacancy centers in single-crystal diamond

Exposure to beams of low-energy electrons (2-30 keV) in a scanning electron microscope locally induces formation of NV-centers without thermal annealing in diamonds that have been implanted with nitrogen ions. In this study, we find that non-thermal, electron-beam-induced NV-formation is about four times less efficient than thermal annealing. But NV-center formation in a consecutive thermal annealing step (800°C) following exposure to low-energy electrons increases by a factor of up to 1.8 compared to thermal annealing alone. Finally, these observations point to reconstruction of nitrogen-vacancy complexes induced by electronic excitations from low-energy electrons as an NV-center formation mechanism and identify local electronic excitations as a means for spatially controlled room-temperature NV-center formation.

36 MATERIALS SCIENCE↗

Hyperfine interactions in titanates: Study of orbital ordering and local magnetic properties

Hyperfine magnetic fields induced on the nuclei of nonmagnetic ions {sup 139}La and {sup 89}Y in LaTiO{sub 3} and YTiO{sub 3}, respectively, have been microscopically calculated. The dependence of the hyperfine fields on the orbital and magnetic structures of the compounds under study has been analyzed. The comparative analysis of the calculated and known experimental data confirms the existence of the static orbital structure in lanthanum and yttrium titanates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elemental and topographical imaging of microscopic variations in deposition on NSTX-U and DIII-D samples

Tokamak plasma facing components have surface roughness that can cause microscopic spatial variations in erosion and deposition and hence influence material migration, erosion lifetime, dust and tritium accumulation, and plasma contamination. However high spatial resolution measurements of deposition on the scale of the surface roughness have been lacking to date. We will present elemental images of graphite samples from NSTX-U and DIII-D DiMES experiments performed with a Scanning Auger Microprobe at sub-micron resolution that show strong microscopic variations in deposition and correlate this with 3D topographical maps of surface irregularities. The NSTX-U samples were boronized and exposed to deuterium plasmas and the DiMES samples had localized Al and W films and were exposed to dedicated helium plasmas. Topographical maps of the samples were performed with a 3D confocal optical microscope and compared to the elemental deposition pattern. The results revealed localized deposition concentrated in areas shadowed from the ion flux, incident in a direction calculated (for the DiMES case) by taking account of the magnetic pre-sheath.

Surface analysis↗