SEARCH · Engineering Papers

Results for “I:C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Designing Ta C Virtual Substrates for Vertical Al x Ga 1 − x N Power Electronics Devices

Power electronics are critical for a sustainable energy future, playing a key role in electrification and integration of renewable energy sources into the grid. Advances in ultrawide band gap materials are needed to handle higher powers in smaller form factors while reducing electrical and thermal losses. High Al content Al x Ga 1 − x N is theoretically capable of meeting these demands, but its impact in power electronics has been severely restricted by a lack of substrates that can satisfy conductivity, lattice matching, and/or thermal expansion requirements. We demonstrate that electrically conductive Ta C can be used as a virtual substrate for Al x Ga 1 − x N heteroepitaxy. Scaleably sputtered Ta C grown on Al 2 O 3 , followed by high-temperature face-to-face annealing, produces a thin film Ta C template with an effective hexagonal lattice constant matched to Al 0.70 Ga 0.30 N . Annealing of the Ta C promotes recrystallization, significantly improving crystallinity and reducing crystalline defects from as-deposited columnar grains to a step-and-terrace surface morphology, enabling the subsequent growth of high-quality Al 0.70 Ga 0.30 N by molecular beam epitaxy. X-ray diffraction and scanning transmission electron microscopy confirm that the Al x Ga 1 − x N layer is heteroepitaxially aligned, strain-free, and lattice-matched, transitioning abruptly from Ta C to Al x Ga 1 − x N without intermediate phases. These results demonstrate Ta C virtual substrates as electrically conductive, lattice-matched, and thermally compatible templates for vertical Al x Ga 1 − x N devices that can meet the growing power needs of a sustainable energy future. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

DOE OSTI2024

Impact of Sugarcane Cultivation on C Cycling in Southeastern United States Following Conversion From Grazed Pastures

ABSTRACT The expansion of sugarcane, a tropical high‐yielding feedstock, will likely reshape the Southeastern United States (SE US) bioenergy landscape. However, the sustainability of sugarcane, particularly as it displaces grazed pastures, is highly uncertain. Here, we investigated how pasture conversion to sugarcane in subtropical Florida impacts net ecosystem CO 2 exchange (NEE) and net ecosystem carbon (C) balance (NECB). Measurements were made over three full growth cycles (> 3 years) in sugarcane—plant cane, PC; first ratoon cane, FRC; second ratoon cane, SRC—and in improved (IM) and semi‐native (SN) pastures, which make up ca. 37% of agricultural land in the region. Immediately following conversion, PC was a stronger net source of CO 2 than pastures, indicating the importance of CO 2 losses related to land disturbance. Sugarcane, however, shifted to a strong net sink of CO 2 after first regrowth, and overall sugarcane was a stronger net CO 2 sink than pastures. Both stand age and low water availability during cane emergence and tillering substantially decreased its potential gross CO 2 uptake. Accounting for all C gains and removals (i.e., NECB), greater frequency of burn events and repeated harvest increased removals and overall made sugarcane a stronger C source relative to pastures despite substantial C inputs from the previous land use and a stronger CO 2 sink strength. Time since conversion substantially reduced C losses from sugarcane, and the NECB of SRC was similar to that of IM pasture but lower than that of SN pasture, indicating a rapid shift in the NECB of cane. We conclude that the C‐balance implications following conversion will depend on the proportion of IM versus SN pastures converted to sugarcane. Furthermore, our findings suggest that no‐burn harvest management strategies will be critical to the development of a sustainable bioenergy landscape in SE US.

Gomez‐Casanovas, Nuria↗

DOE OSTI2022

Mesophyll conductance response to short-term changes in p CO 2 is related to leaf anatomy and biochemistry in diverse C 4 grasses

Mesophyll CO 2 conductance (g m ) in C 3 species responds to short-term (minutes) changes in environment potentially due to changes in leaf anatomical and biochemical properties and measurement artefacts. Compared with C 3 species, there is less information on g m responses to short-term changes in environmental conditions such as partial pressure of CO 2 (pCO 2 ) across diverse C 4 species and the potential determinants of these responses. Using 16 C 4 grasses we investigated the response of g m to short-term changes in pCO 2 and its relationship with leaf anatomy and biochemistry. In general, g m increased as pCO 2 decreased (statistically significant increase in 12 species), with percentage increases in gm ranging from +13% to +250%. Greater increase in g m at low pCO 2 was observed in species exhibiting relatively thinner mesophyll cell walls along with greater mesophyll surface area exposed to intercellular air spaces, leaf N, photosynthetic capacity and activities of phosphoenolpyruvate carboxylase and Rubisco. Species with greater CO 2 responses of g m were also able to maintain their leaf water-use efficiencies (TE i ) under low CO 2 . Our study advances understanding of CO 2 response of g m in diverse C 4 species, identifies the key leaf traits related to this response and has implications for improving C 4 photosynthetic models and TE i through modification of g m .

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

K 2P channel C-type gating involves asymmetric selectivity filter order-disorder transitions

K 2P potassium channels regulate cellular excitability using their selectivity filter (C-type) gate. C-type gating mechanisms, best characterized in homotetrameric potassium channels, remain controversial and are attributed to selectivity filter pinching, dilation, or subtle structural changes. The extent to which such mechanisms control C-type gating of innately heterodimeric K 2P s is unknown. Here, combining K 2P 2.1 (TREK-1) x-ray crystallography in different potassium concentrations, potassium anomalous scattering, molecular dynamics, and electrophysiology, we uncover unprecedented, asymmetric, potassium-dependent conformational changes that underlie K 2P C-type gating. These asymmetric order-disorder transitions, enabled by the K 2P heterodimeric architecture, encompass pinching and dilation, disrupt the S1 and S2 ion binding sites, require the uniquely long K 2P SF2-M4 loop and conserved “M3 glutamate network,” and are suppressed by the K 2P C-type gate activator ML335. These findings demonstrate that two distinct C-type gating mechanisms can operate in one channel and underscore the SF2-M4 loop as a target for K 2P channel modulator development.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Gas-phase formation of the resonantly stabilized 1-indenyl (C 9 H 7 • ) radical in the interstellar medium

The 1-indenyl (C 9 H 7 • ) radical, a prototype aromatic and resonantly stabilized free radical carrying a six- and a five-membered ring, has emerged as a fundamental molecular building block of nonplanar polycyclic aromatic hydrocarbons (PAHs) and carbonaceous nanostructures in deep space and combustion systems. However, the underlying formation mechanisms have remained elusive. Here, we reveal an unconventional low-temperature gas-phase formation of 1-indenyl via barrierless ring annulation involving reactions of atomic carbon [C( 3 P)] with styrene (C 6 H 5 C 2 H 3 ) and propargyl (C 3 H 3 • ) with phenyl (C 6 H 5 • ). Macroscopic environments like molecular clouds act as natural low-temperature laboratories, where rapid molecular mass growth to 1-indenyl and subsequently complex PAHs involving vinyl side-chained aromatics and aryl radicals can occur. These reactions may account for the formation of PAHs and their derivatives in the interstellar medium and carbonaceous chondrites and could close the gap of timescales of their production and destruction in our carbonaceous universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Mid-day photomixotrophy by Roseiflexus spp. and implications for the 13 C content of hot spring cyanobacterial mats

Microbial mats inhabiting extreme environments have been studied as modern analogs of stromatolites. Mats in Octopus Spring and Mushroom Spring, Yellowstone National Park, are predominated by unicellular photoautotrophic cyanobacteria (Synechococcus spp.), which are thought to cross-feed filamentous photoheterotrophic bacteria (mainly Roseiflexus spp.), except under early morning anoxic conditions when Roseiflexus spp. have been shown to fix dissolved inorganic carbon (DIC). Transcription patterns, however, suggest that Roseiflexus spp. may perform photomixotrophy, in which DIC is incorporated together with organic compounds during the daytime. We investigated the roles played by Synechococcus spp. and Roseiflexus spp. in DIC and organic matter uptake in mid-day light and oxic mats. Mass spectrometry was used to show that 13 C-bicarbonate uptake under infrared (IR) light (utilized by anoxygenic phototrophs) or visible-minus-blue light (V-B) (used by cyanobacteria) was about two-thirds and one-third, respectively, of that incorporated in full light. Laser-ablation mass spectrometry analysis demonstrated that 13 C incorporation under V-B light was restricted to the uppermost portion of the mat, whereas 13 C incorporation under IR light was maximal in deeper mat layers. 13 C-acetate, -propionate, -lactate, and -glycolate were incorporated to an equal or greater extent under IR and full light. Incorporation of 13 C into peptides showed that both Synechococcus spp. and Roseiflexus spp. were active in DIC uptake, whereas Roseiflexus spp. exhibited greater uptake of 13 C-organic acids, especially glycolate and lactate, into peptides. Peptides of proteins of the 3-hydroxypropionate pathway were labeled. Thus, Roseiflexus spp. appears to exhibit photomixotrophy throughout the day.

Roseiflexus↗

DOE OSTI2022

Establishing Butyribacterium methylotrophicum as a Platform Organism for the Production of Biocommodities from Liquid C 1 Metabolites

Using the Wood-Ljungdahl pathway, acetogens can nonphotosynthetically fix gaseous C 1 molecules, preventing them from entering the atmosphere. Many acetogens can also grow on liquid C 1 compounds such as formate and methanol, which avoid the storage and mass transfer issues associated with gaseous C 1 compounds. Substrate redox state also plays an important role in acetogen metabolism and can modulate products formed by these organisms. Butyribacterium methylotrophicum is an acetogen known for its ability to synthesize longer-chained molecules such as butyrate and butanol, which have significantly higher values than acetate or ethanol, from one-carbon (C 1 ) compounds. We explored B. methylotrophicum’s C 1 metabolism by varying substrates, substrate concentrations, and substrate feeding strategies to improve four-carbon product titers. Our results showed that formate utilization by B. methylotrophicum favored acetate production and methanol utilization favored butyrate production. Cofeeding of both substrates produced a high butyrate titer of 4 g/liter when methanol was supplied in excess to formate. Testing of formate feeding strategies, in the presence of methanol, led to further increases in the butyrate to acetate ratio. Mixotrophic growth of liquid and gaseous C 1 substrates expanded the B. methylotrophicum product profile, as ethanol, butanol, and lactate were produced under these conditions. We also showed that B. methylotrophicum is capable of producing caproate, a six-carbon product, presumably through chain elongation cycles of the reverse β-oxidation pathway. Furthermore, we demonstrated butanol production via heterologous gene expression. Finally, our results indicate that both selection of appropriate substrates and genetic engineering play important roles in determining titers of desired products.

09 BIOMASS FUELS↗

DOE OSTI2025

A simple and highly efficient protocol for 13 C-labeling of plant cell wall for structural and quantitative analyses via solid-state nuclear magnetic resonance

Plant cell walls are made of a complex network of interacting polymers that play a critical role in plant development and responses to environmental changes. Thus, improving plant biomass and fitness requires the elucidation of the structural organization of plant cell walls in their native environment. The 13 C-based multi-dimensional solid-state nuclear magnetic resonance (ssNMR) has been instrumental in revealing the structural information of plant cell walls through 2D and 3D correlation spectral analyses. However, the requirement of enriching plants with 13 C limits the applicability of this method. To our knowledge, there is only a very limited set of methods currently available that achieve high levels of 13 C-labeling of plant materials using 13 CO 2 , and most of them require large amounts of 13 CO 2 in larger growth chambers. In this study, a simplified protocol for 13C-labeling of plant materials is introduced that allows ca 60% labeling of the cell walls, as quantified by comparison with commercially labeled samples. This level of 13 C-enrichment is sufficient for all conventional 2D and 3D correlation ssNMR experiments for detailed analysis of plant cell wall structure. The protocol is based on a convenient and easy setup to supply both 13 C-labeled glucose and 13 CO 2 using a vacuum-desiccator. The protocol does not require large amounts of 13 CO 2 . This study shows that our 13 C-labeling of plant materials can make the accessibility to ssNMR technique easy and affordable. The derived high-resolution 2D and 3D correlation spectra are used to extract structural information of plant cell walls. This helps to better understand the influence of polysaccharide-polysaccharide interaction on plant performance and allows for a more precise parametrization of plant cell wall models.

09 BIOMASS FUELS↗

DOE OSTI2022

Influence of root- vs needle-derived litter on soil C and N stabilization in a California coniferous forest from 2001 to 2011

How plant inputs from above- versus below-ground affect long term carbon (C) and nitrogen (N) retention and stabilization in soils is not well known. We present results of a decade-long field study that traced the decomposition of 13C- and 15N-labeled Pinus ponderosa needle and fine root litter placed in O or A soil horizons of a sandy Alfisol under a coniferous forest. We measured the retention of litter-derived C and N in particulate (>2 mm) and bulk soil (<2 mm) fractions, as well as in density-separated free light and three mineral-associated fractions. After 10 years, the influence of slower initial mineralization of root litter compared to needle litter was still evident: almost twice as much root litter (44% of C) was retained than needle litter (22–28% of C). After 10 years, the O horizon retained more litter in coarse particulate matter implying the crucial comminution step was slower than in the A horizon, while the A horizon retained more litter in the finer bulk soil, where it was recovered in organo-mineral associations. Retention in these A horizon mineral-associated fractions was similar for roots and needles. Nearly 5% of the applied litter C (and almost 15% of the applied N) was in organo-mineral associations, which had centennial residence times and potential for long-term stabilization. Vertical movement of litter-derived C was minimal after a decade, but N was significantly more mobile. Overall, the legacy of initial litter quality influences total SOM retention; however, the potential for and mechanisms of long-term SOM stabilization are influenced not by litter type but by soil horizon.This dataset comprises (1) litter recovery for each of 5 timepoints in >2mm, <2mm, and density fractions, (2) density fractionation results for the 10-year timepoint, and (3) vertical movement of applied litter.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Impact of annealing at 1000°C in flowing He with low O 2 concentration on the room temperature tensile properties of Mo alloys

NorthStar is developing an accelerator-based technology to produce the medical isotope Mo-99. A previous ORNL report (ORNL/SPR-2022/2490) studied the oxidation behavior of Mo in flowing He with low oxygen content at 800°C and 1000°C and it was shown that an O 2 concentration lower than ~5ppm (μ1/1) is required to achieve acceptable oxidation rates for wrought or powder metallurgy (PM) Mo. Oxidation may also impact the mechanical properties of Mo and this report summarizes tensile results at room temperature on wrought and PM Mo before and after exposure at 1000°C in flowing He with O 2 concentration varying from 1 to 15 ppm O 2 . It was found that oxidation at 1000°C results in a significant decrease of Mo strength and ductility with brittle intergranular fracture surfaces, likely due to the segregation of oxygen at grain boundaries. For the PM Mo material, the decrease in strength and ductility was also observed after annealing in vacuum at 1000°C, indicating that the diffusion of the oxygen trapped in the material pores to grain boundaries after 20-100h at 1000°C is sufficient to embrittle the material. Finally, initial results on actual aMo and high-density disks provided by NorthStar revealed the lack of ductility of the materials due to the specific disk microstructure.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Pressure-Induced Dimerization of C 60 at Room Temperature as Revealed by an In Situ Spectroscopy Study Using an Infrared Laser

Using in situ high-pressure Raman spectroscopy and X-ray diffraction, the polymerization and structure evaluation of C 60 were studied up to 16 GPa at room temperature. The use of an 830 nm laser successfully eliminated the photo-polymerization of C 60 , which has interfered with the pressure effect in previous studies when a laser with a shorter wavelength was used as excitation. It was found that face-centered cubic (fcc) structured C 60 transformed into simple cubic (sc) C 60 due to the hint of free rotation for the C 60 at 0.3 GPa. The pressure-induced dimerization of C 60 was found to occur at about 3.2 GPa at room temperature. Our results suggest the benefit and importance of the choice of the infrared laser as the excitation laser.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Microbial Type IA Topoisomerase C-Terminal Domain Sequence Motifs, Distribution and Combination

Type IA topoisomerases have highly conserved catalytic N-terminal domains for the cleaving and rejoining of a single DNA/RNA strand that have been extensively characterized. In contrast, the C-terminal region has been less covered. Two major types of small tandem C-terminal domains, Topo_C_ZnRpt (containing C4 zinc finger) and Topo_C_Rpt (without cysteines) were initially identified in Escherichia coli and Mycobacterium tuberculosis topoisomerase I, respectively. Their structures and interaction with DNA oligonucleotides have been revealed in structural studies. Here, we first present the diverse distribution and combinations of these two structural elements in various bacterial topoisomerase I (TopA). Previously, zinc fingers have not been seen in type IA topoisomerases from well-studied fungal species within the phylum Ascomycota. In our extended studies of C-terminal DNA-binding domains, the presence of zf-GRF and zf-CCHC types of zinc fingers in topoisomerase III (Top3) from fungi species in many phyla other than Ascomycota has drawn our attention. We secondly analyze the distribution and combination of these fungal zf-GRF- and zf-CCHC-containing domains. Their potential structures and DNA-binding mechanism are evaluated. The highly diverse arrangements and combinations of these DNA/RNA-binding domains in microbial type IA topoisomerase C-terminal regions have important implications for their interactions with nucleic acids and protein partners as part of their physiological functions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Electronic Origin of T c in Bulk and Monolayer FeSe

FeSe is classed as a Hund’s metal, with a multiplicity of d bands near the Fermi level. Correlations in Hund’s metals mostly originate from the exchange parameter J, which can drive a strong orbital selectivity in the correlations. The Fe-chalcogens are the most strongly correlated of the Fe-based superconductors, with d xy the most correlated orbital. Yet little is understood whether and how such correlations directly affect the superconducting instability in Hund’s systems. By applying a recently developed ab initio theory, we show explicitly the connections between correlations in d xy and the superconducting critical temperature T c . Starting from the ab initio results as a reference, we consider various kinds of excursions in parameter space around the reference to determine what controls T c . We show small excursions in J can cause colossal changes in T c . Additionally we consider changes in hopping by varying the Fe-Se bond length in bulk, in the free standing monolayer M-FeSe, and M-FeSe on a SrTiO 3 substrate (M-FeSe/STO). The twin conditions of proximity of the dxy state to the Fermi energy, and the strength of J emerge as the primary criteria for incoherent spectral response and enhanced single- and two-particle scattering that in turn controls T c . Using c-RPA, we show further that FeSe in monolayer form (M-FeSe) provides a natural mechanism to enhance J. We explain why M-FeSe/STO has a high T c , whereas M-FeSe in isolation should not. Our study opens a paradigm for a unified understanding what controls Tc in bulk, layers, and interfaces of Hund’s metals by hole pocket and electron screening cloud engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Computationally Selected Multivalent HIV-1 Subtype C Vaccine Protects Against Heterologous SHIV Challenge

Background: The RV144 trial in Thailand is the only HIV-1 vaccine efficacy trial to date to demonstrate any efficacy. Genetic signatures suggested that antibodies targeting the variable loop 2 (V2) of the HIV-1 envelope played an important protective role. The ALVAC prime and protein boost follow-up trial in southern Africa (HVTN702) failed to show any efficacy. One hypothesis for this is the greater diversity of subtype C viruses in southern Africa relative to CRF01_AE in Thailand. Methods: Here, we determined whether an ALVAC prime with computationally selected gp120 boost immunogens maximizing coverage of diversity of subtype C viruses in the variable V1 and V2 regions (V1V2) improved the protection of non-human primates (NHPs) from a heterologous subtype C SHIV challenge compared to more traditional regimens. Results: An ALVAC prime with Trivalent subtype C gp120 boosts resulted in statistically significant protection from repeated intrarectal SHIV challenges compared to the control. Evaluation of the immunogenicity of each vaccine regimen at the time of challenge demonstrated that different gp120 combination boosts elicited similar high magnitudes of gp120 and breadth of V1V2-binding antibodies, as well as strong Fc-mediated immune responses. Low-to-no neutralization of the challenge virus was detected. A Cox proportional hazard analysis of five pre-selected immune parameters at the time of challenge identified ADCC against the challenge envelope as a correlate of protection. Systems serology analysis revealed that immune responses elicited by the different vaccine regimens were distinct and identified further correlates of resistance to infection. Conclusions: Computationally designed vaccines with maximized subtype C V1V2 coverage mediated protection of NHPs from a heterologous Tier-2 subtype C SHIV challenge.

Immunology↗

DOE OSTI2024

Fuel Performance Evaluation of THOR-C Experiments

The Temperature Heatsink Overpower Response Commissioning (THOR-C) and THOR-Metal (THOR-M) experiments will be performed as part of an ongoing project for testing sodium fast reactor fuels with the Japan Atomic Energy Agency (JAEA). The THOR-C experiments consist of fresh metallic fuel pins and have been analyzed using the ABAQUS, Ansys codes and the BISON fuel performance code. THOR-M-Loss of Flow-1 (THOR-M-LOF-1) is designed to test an EBR-II irradiated fuel pin under LOF conditions. Simulation of the THOR-MLOF-1 experiment required first simulating the base irradiation of the fuel pin in EBR-II. MFUEL module of SAS4A/SASSYS-1 [1] is a physics-based metallic fuel performance model applicable to the normal operation, transient scenarios and fuel failure modeling including scenarios with bulk fuel melting. The model has been validated using EBR-II normal operation, separate effect transient tests as well as TREAT M-Series transient tests [2]. In this study, MFUEL models has been utilized together with a new capsule heat transfer model developed in this project. The new heat transfer model was necessary due to (1) significant amount of heat losses that required 2D heat transfer, (2) the presence of a titanium heat sink, rejecting a significant amount of heat, and (3) stagnant coolant conditions, which are inconsistent with SAS4A/SASSYS-1 (SAS) heat transfer model. Updates to SAS4A/SASSYS-1 and MFUEL has been described below, followed by a preliminary validation effort using the results from THOR-C-2 fresh fuel capsule experiment. A previous study for THOR-C-2 analysis using BISON code is also utilized in this study to model this test [3]. [1] D. O’Grady, A. J. Brunett, L. Ibarra, A. Karahan, T. Kim, T. S. Sumner, R. Thomas, T. H. Fanning, “The SAS4A/SASSYS-2 Version 5.7 Safety Analysis Code System,” Argonne National Laboratory,ANL/NSE-SAS/5.7, (2023). [2] A. Karahan, T. Kim, T. Fanning, D. O’Grady, “Validation of MFUEL Metal Fuel Performance Models of SAS4A/SASSYS-1,” Argonne National Laboratory, ANL/NSE-23/11, (2023). [3] M. Mihelish, A. Zabriskie, K. Paaren, P. Medvedev, C. Jensen, “Fuel Performance Predictions for the TREAT THOR-C Experiments,” Idaho National Laboratory, INL/RPT-23-73397, Revision 0, (2023)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Measurement of the production cross section of prompt $ {\Xi}_{\mathrm{c}}^0 $ baryons at midrapidity in pp collisions at $ \sqrt{s} $ = 5.02 TeV

The transverse momentum (p T ) differential cross section of the charm-strange baryon $ {\Xi}_{\mathrm{c}}^0 $ is measured at midrapidity (|y| < 0.5) via its semileptonic decay into e + Ξ - ν e in pp collisions at $\sqrt{s}$ = 5.02 TeV with the ALICE detector at the LHC. The ratio of the p T -differential $ {\Xi}_{\mathrm{c}}^0 $-baryon and D 0 -meson production cross sections is also reported. The measurements are compared with simulations with different tunes of the PYTHIA 8 event generator, with predictions from a statistical hadronisation model (SHM) with a largely augmented set of charm-baryon states beyond the current lists of the Particle Data Group, and with models including hadronisation via quark coalescence. The p T -integrated cross section of prompt $ {\Xi}_{\mathrm{c}}^0 $-baryon production at midrapidity is also reported, which is used to calculate the baryon-to-meson ratio $ {\Xi}_{\mathrm{c}}^0 $/D 0 = 0.20 ± 0.04 (stat.)$^{+0.08}_{-0.07}$ (syst.). These results provide an additional indication of a modification of the charm fragmentation from e + e - and e - p collisions to pp collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Measurement of the absolute branching fraction of Λ c + → p K S 0 η decays

Based on 586 pb -1 of e + e - annihilation data collected at a center-of-mass energy of √s = 4.6 GeV with the BESIII detector at the BEPCII collider, the absolute branching fraction of $Λ^+_c$ → $pK^0_Sη$ decays is measured for the first time to be $B$($Λ^+_c$ → $pK^0_Sη$) = (0.414±0.084±0.028)%, where the first uncertainty is statistical and the second is systematic. The result is compatible with a previous CLEO result on the relative branching fraction B ( Λ c + → p K S 0 η ) B ( Λ c + → p K − π + ) , and consistent with theoretical predictions of SU(3) flavor symmetry.

$Λ^+_c$, Charmed baryon decays↗

DOE OSTI2025

Study of Λ b 0 and Ξ b 0 Decays to Λ h + h ′ − and Evidence for C P Violation in Λ b 0 → Λ K + K − Decays

A study of Λ b 0 and Ξ b 0 decays to Λ h + h ′ − ( h ( ′ ) = π , K ) is performed using p p collision data collected by the LHCb experiment during LHC Runs 1–2, corresponding to an integrated luminosity of 9 fb − 1 . The branching fractions for these decays are measured using the Λ b 0 → Λ c + ( → Λ π + ) π − decay as a control channel. The decays Λ b 0 → Λ π + π − and Ξ b 0 → Λ K − π + are observed for the first time. For decay modes with sufficient signal yields, C P asymmetries are measured in the full and localized regions of the final-state phase space. Evidence is found for C P violation in the Λ b 0 → Λ K + K − decay, interpreted as originating primarily from an asymmetric Λ b 0 → N * + K − decay amplitude. The measured C P asymmetries for other decays are compatible with zero. © 2025 CERN, for the LHCb Collaboration 2025 CERN

Aaij, R. (ORCID:0000000305331952)↗