Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fragmentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A covalent inhibitor targeting the papain-like protease from SARS-CoV-2 inhibits viral replication

Covalent inhibitors of the papain-like protease (PLpro) from SARS-CoV-2 have great potential as antivirals, but their non-specific reactivity with thiols has limited their development. In this report, we performed an 8000 molecule electrophile screen against PLpro and identified an α-chloro amide fragment, termed compound 1, which inhibited SARS-CoV-2 replication in cells, and also had low non-specific reactivity with thiols. Compound 1 covalently reacts with the active site cysteine of PLpro, and had an IC50 of 18 μM for PLpro inhibition. Compound 1 also had low non-specific reactivity with thiols and reacted with glutathione 1–2 orders of magnitude slower than other commonly used electrophilic warheads. Finally, compound 1 had low toxicity in cells and mice and has a molecular weight of only 247 daltons and consequently has great potential for further optimization. Collectively, these results demonstrate that compound 1 is a promising lead fragment for future PLpro drug discovery campaigns.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Mobility of soil-biodegradable nanoplastics in unsaturated porous media affected by protein-corona

Soil-biodegradable plastic has been increasingly used as mulches in agriculture, which provides not only agronomical benefits but also in situ disposal and biodegradation options. However, soil-biodegradable plastic mulches inevitably fragment into micro- and nanoplastics during biodegradation, which can reside in soils or migrate into deep soils, where they may not degrade readily due to reduced microbial activity. To date, little is known about the transport of soil-biodegradable micro- and nanoplastics in soils. Here, in this study, we studied the transport of soil-biodegradable nanoplastics (∼200 nm) made of polybutylene adipate co-terephthalate (PBAT) in unsaturated sand (proxy for soil). Specifically, we studied the mobility of pristine and weathered PBAT nanoplastics in the absence and presence of proteins (positively charged lysozyme and negatively charged bovine serum albumin, pH = 7.7). We found that (1) both pristine and the weathered PBAT nanoplastics were mobile; (2) positively charged lysozyme formed protein-coronas around PBAT nanoplastics and inhibited the transport; and (3) decreased water saturation promoted the retention of PBAT nanoplastics via physical straining. These results suggest that soil-biodegradable nanoplastics fragmented from soil-biodegradable plastic mulches are mobile and may readily migrate into deep soil layers, but positively charged proteins and unsaturated flow would prevent such transport via formation of protein-corona and physical straining.

Yu, Yingxue↗
DOE OSTI2026

Hierarchical microstructure of Yb-filled skutterudites through ultrasonically atomized spherical powders for enhanced thermoelectric performance

Hierarchical microstructures are widely explored as a strategy to reduce lattice thermal conductivity in thermoelectric materials while preserving favorable electronic transport. Here we demonstrate that ultrasonic atomization of precursor powders provides an intrinsic pathway to generate such architectures in n-type Yb0.3Co4Sb12 skutterudites. Materials were synthesized by both conventional sealed-ampoule and ultrasonic atomization routes, each yielding essentially single-phase skutterudite after densification. However, the atomized spherical powders undergo a distinct reaction-driven microstructural evolution during thermal treatment prior to densification. Electron microscopy reveals that the skutterudite phase within the particles induces swelling, cracking, and fragmentation of the droplets before consolidation. Multimodal structural and microstructural characterizations show that densification of these fragmented powders produces a hierarchical microstructure consisting of submicron grains, micrometer-scale faceted crystallites, and powder-derived domains separated by oxide-decorated boundaries. Comprehensive thermoelectric transport measurements evidence that this multiscale architecture lowers the lattice thermal conductivity while maintaining favorable electronic transport, leading to an average ~10% enhancement in the thermoelectric figure of merit. Complementary 121Sb Mössbauer spectroscopy further indicates lattice softening in the atomized material. These results demonstrate that ultrasonic atomization provides an effective route to engineer hierarchical microstructures in skutterudite thermoelectrics and offers a promising strategy for tailoring thermal transport in energy-conversion materials.

Bouteiller, Hugo [ORNL] (ORCID:0009000421322962)↗
DOE OSTI2020

Let’s get our hands dirty: a comprehensive evaluation of DAQDB, key-value store for petascale hot storage

Data acquisition systems are a key component for successful data taking in any experiment. The DAQ is a complex distributed computing system and coordinates all operations, from the data selection stage of interesting events to storage elements. For the High Luminosity upgrade of the Large Hadron Collider, the experiments at CERN need to meet challenging requirements to record data with a much higher occupancy in the detectors. The DAQ system will receive and deliver data with a significantly increased trigger rate, one million events per second, and capacity, terabytes of data per second. An effective way to meet these requirements is to decouple real-time data acquisition from event selection. Data fragments can be temporarily stored in a large distributed key-value store. Fragments belonging to the same event can be then queried on demand, by the data selection processes. Implementing such a model relies on a proper combination of emerging technologies, such as persistent memory, NVMe SSDs, scalable networking, and data structures, as well as high performance, scalable software. In this paper, we present DAQDB (Data Acquisition Database) — an open source implementation of this design that was presented earlier, with an extensive evaluation of this approach, from the single node to the distributed performance. Furthermore, we complement our study with a description of the challenges faced and the lessons learned while integrating DAQDB with the existing software framework of the ATLAS experiment.

Abed Abud, Adam↗
DOE OSTI2021

The Phase-2 Upgrade of the CMS Data Acquisition

The High Luminosity LHC (HL-LHC) will start operating in 2027 after the third Long Shutdown (LS3), and is designed to provide an ultimate instantaneous luminosity of 7:5 × 10$^{34}$ cm$^{-2}$ s$^{-1}$, at the price of extreme pileup of up to 200 interactions per crossing. The number of overlapping interactions in HL-LHC collisions, their density, and the resulting intense radiation environment, warrant an almost complete upgrade of the CMS detector. The upgraded CMS detector will be read out by approximately fifty thousand highspeed front-end optical links at an unprecedented data rate of up to 80 Tb/s, for an average expected total event size of approximately 8 - 10 MB. Following the present established design, the CMS trigger and data acquisition system will continue to feature two trigger levels, with only one synchronous hardware-based Level-1 Trigger (L1), consisting of custom electronic boards and operating on dedicated data streams, and a second level, the High Level Trigger (HLT), using software algorithms running asynchronously on standard processors and making use of the full detector data to select events for offline storage and analysis. The upgraded CMS data acquisition system will collect data fragments for Level-1 accepted events from the detector back-end modules at a rate up to 750 kHz, aggregate fragments corresponding to individual Level- 1 accepts into events, and distribute them to the HLT processors where they will be filtered further. Events accepted by the HLT will be stored permanently at a rate of up to 7.5 kHz. This paper describes the baseline design of the DAQ and HLT systems for the Phase-2 of CMS.

Badaro, Gilbert↗
DOE OSTI2020

Clostridioides difficile Toxin A Remodels Membranes and Mediates DNA Entry Into Cells to Activate Toll-Like Receptor 9 Signaling

Background & Aims: Clostridioides difficile toxin A (TcdA) activates the innate immune response. TcdA co-purifies with DNA. Toll-like receptor 9 (TLR9) recognizes bacterial DNA to initiate inflammation. We investigated whether DNA bound to TcdA activates an inflammatory response in murine models of C difficile infection via activation of TLR9. Methods: We performed studies with human colonocytes and monocytes and macrophages from wild-type and TLR9 knockout mice incubated with TcdA or its antagonist (ODN TTAGGG) or transduced with vectors encoding TLR9 or small-interfering RNAs. Cytokine production was measured with enzyme-linked immunosorbent assay. We studied a transduction domain of TcdA (TcdA 57-80 ), which was predicted by machine learning to have cell-penetrating activity and confirmed by synchrotron small-angle X-ray scattering. Intestines of CD1 mice, C57BL6J mice, and mice that express a form of TLR9 that is not activated by CpG DNA were injected with TcdA, TLR9 antagonist, or both. Enterotoxicity was estimated based on loop weight to length ratios. A TLR9 antagonist was tested in mice infected with C difficile. We incubated human colon explants with an antagonist of TLR9 and measured TcdA-induced production of cytokines. Results: The TcdA 57-80 protein transduction domain had membrane remodeling activity that allowed TcdA to enter endosomes. TcdA-bound DNA entered human colonocytes. TLR9 was required for production of cytokines by cultured cells and in human colon explants incubated with TcdA. TLR9 was required in TcdA-induced mice intestinal secretions and in the survival of mice infected by C difficile. Even in a protease-rich environment, in which only fragments of TcdA exist, the TcdA 57-80 domain organized DNA into a geometrically ordered structure that activated TLR9. Conclusions: TcdA from C difficile can bind and organize bacterial DNA to activate TLR9. TcdA and TcdA fragments remodel membranes, which allows them to access endosomes and present bacterial DNA to and activate TLR9. Rather than inactivating the ability of DNA to bind TLR9, TcdA appears to chaperone and organize DNA into an inflammatory, spatially periodic structure.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Dalton Project: A Python platform for molecular- and electronic-structure simulations of complex systems

The Dalton Project provides a uniform platform access to the underlying full-fledged quantum chemistry codes Dalton and LSDalton as well as the PyFraME package for automatized fragmentation and parameterization of complex molecular environments. The platform is written in Python and defines a means for library communication and interaction. Intermediate data such as integrals are exposed to the platform and made accessible to the user in the form of NumPy arrays, and the resulting data are extracted, analyzed, and visualized. Complex computational protocols that may, for instance, arise due to a need for environment fragmentation and configuration-space sampling of biochemical systems are readily assisted by the platform. The platform is designed to host additional software libraries and will serve as a hub for future modular software development efforts in the distributed Dalton community.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Local measurement of bulk thermal diffusivity using photothermal radiometry

Here, an experimental methodology using photothermal radiometry is developed for the accurate measurement of bulk thermal diffusivity of nuclear fuels and materials irradiated to high doses. Under these conditions, nuclear fuels, such as uranium oxide, and moderator materials, such as graphite, become friable, which requires characterization techniques that can accommodate irregularly shaped fragments. Photothermal radiometry, a good candidate for this application, involves locally heating a sample by using a laser and measuring the temperature field by monitoring blackbody radiation. The interaction volume for this study, less than a millimeter, is carefully chosen to sample a statistically significant number of large-scale structural features, such as pores and gas filled bubbles, and is small enough that the sample fragments can be treated as a thermal half-space. The thermal diffusivity standards considered in this study cover a range of thermal diffusivities representative of both fresh and spent nuclear fuels. We also consider a sample having a porous microstructure representative of large-scale structures found in materials irradiated to high doses. Our measurement methodology circumvents complex thermal wave models that address optical diffraction, nonlinear transfer function associated with blackbody radiation, and finite sample size effects. Consequently, the large measurement uncertainty associated with modeling these effects can be avoided. While the emphasis here is on nuclear fuels and materials, this measurement approach is well suited to measure thermal transport in a variety of technologically important materials associated with advanced synthesis techniques. Examples range from small, exotic single crystals grown using hydrothermal growth techniques to additively manufactured components having complex geometries.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electron scattering with ethane adsorbed on rare gas multilayers: Hole transfer, coulomb decay, and ion dissociation

Positive ion desorption following electron impact dissociative ionization of ethane adsorbed on Ar, Kr, and Xe multilayers has been studied as a function of incident electron energy from threshold to 100 eV. Based on the dependence of ion yields on the identity of the rare gas, it is likely that the majority of ethane molecules undergo indirect ionization following hole transfer from the ionized underlying rare gas. Further, this has also been corroborated by density of states calculations showing the energetic alignment of the outer valence states of ethane and the condensed rare gas ionization energies. Due to the near-resonant nature of charge transfer for single-hole states, the ethane molecular ion is excited to different final ionic states on different rare gases, which leads to differences in ion desorption yields and branching ratios. The quantitative yields increase with increasing ionization energy gap between the rare gas and ethane, in the order Ar > Kr >Xe. The large increase in yields from 25 eV onwards for all rare gases is likely due to the formation and decay of two-hole states on neighboring rare gas and ethane molecules due to interatomic and intermolecular Coulomb decay (ICD) and not electron transfer mediated decay (ETMD). The ICD and ETMD pathways become accessible when the incoming electron has sufficient energy to excite the inner valence ns level of the rare gas to a Rydberg state or ionize it. The experimental findings are supported by calculations of thresholds, density of states for the final configurations of these processes, and coupling strengths for hole transfer between ethane and rare gases. The fragment ion branching ratios vary with energy from threshold to about 35 eV, showing the fragmentation pattern changes with the mode of hole transfer and availability of excess energy. Sigma C–C bonds are more likely to break than C–H bonds in the mid-20 eV range, and this effect is most pronounced for Xe, followed by Kr, and then Ar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Measurement and simulation of small cryogenic neon pellet Ne-I 640 nm photon efficiency during ablation in DIII-D plasma

Small (~1 mm) neon pellet fragments are fired into DIII-D H-mode plasmas, and resulting trajectory-averaged photon efficiencies (neutral neon ionization events for every photon emitted) of S/XB ≈ 85 are estimated for Ne-I 640 nm by dividing the estimated initial pellet fragment mass by the measured number of emitted Ne-I photons. The experiments are modeled by running the Lagrangian particle (LP) fluid/magneto-hydrodynamic pellet code to estimate axial ablation plume neon density profiles and temperature profiles at each pellet position. These solutions are then fed into the PrismSPECT collisional-radiative code, which calculates resulting neon charge states and photon emission rates, giving a profile-average of S/XB ≈ 109. The burnthrough plasma minor radius predicted by LP (ρ ≈ 0.63) is reasonably close to the experimental observation ρ ≈ 0.6. Furthermore, the modeling indicates that local S/XB is not constant along the pellet trajectory but tends to increase with increasing ablation rate. Non-equilibrium kinetics are predicted to be very important, while line trapping is predicted to be relatively unimportant (for Ne-I 640 nm S/XB).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Characterizing the multi-dimensional reaction dynamics of dihalomethanes using XUV-induced Coulomb explosion imaging

Site-selective probing of iodine 4d orbitals at 13.1 nm was used to characterize the photolysis of CH 2 I 2 and CH 2 BrI initiated at 202.5 nm. Time-dependent fragment ion momenta were recorded using Coulomb explosion imaging mass spectrometry and used to determine the structural dynamics of the dissociating molecules. Correlations between these fragment momenta, as well as the onset times of electron transfer reactions between them, indicate that each molecule can undergo neutral three-body photolysis. For CH 2 I 2 , the structural evolution of the neutral molecule was simultaneously characterized along the C–I and I–C–I coordinates, demonstrating the sensitivity of these measurements to nuclear motion along multiple degrees of freedom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Single-event burnout in homojunction GaN vertical PiN diodes with hybrid edge termination design

GaN devices play a major role in modern electronics, providing high-power handling, efficient high-frequency operation, and resilience in harsh environments. However, electric field crowding at the edge of the anode often limits its full potential, leading to single-event effects (SEEs) at lower bias voltages under heavy ion radiation. Here, in this work, we report on the performance of homojunction GaN vertical PiN diodes with a hybrid edge termination design under heavy ion irradiation, specifically, oxygen ions, chlorine ions, Cf-252 fission fragments, and alpha particles from an Am-241 source. The unique hybrid edge termination (HET) design provides better electric field management, preventing breakdown from occurring at the edge of the anode at lower voltages. The results of this study reveal that these devices exhibit excellent tolerance to 12-MeV oxygen and 16-MeV chlorine ions, owing to their low linear energy transfer (LET) and range in GaN. However, single-event burnout (SEB) is observed during the Cf-252 exposure at about 50% of the diodes' electrical breakdown voltage due to the presence of higher LET and longer-range ions. Optical and scanning electron microscopy (SEM) reveal that the damage that caused by SEB lies close to the center of these devices rather than the anode edge. Devices with junction termination extension (JTE) instead of HET edge termination also show similar SEB when irradiated with Cf-252 fission fragments. Physical damage due to SEB occurs at the edge of the anode for these devices. These comparative results show the benefits of HET for enhancing the resistance of GaN-based PiN diodes to heavy ion irradiation.

42 ENGINEERING↗
DOE OSTI2025

Quantifying fission yields at the National Ignition Facility using depleted uranium foil experiments

There are programs for high-Z shell experiments at the National Ignition Facility (NIF). For shells made of actinide material, a quantitative fission diagnostic is needed in order to determine how much fission took place and whether the fission was sufficient to produce a non-negligible heat source in the burning capsule. Here, we present a viable coupled experimental and theoretical technique for making quantitative fission measurements possible. The proposed scheme involves using a well-characterized set of depleted uranium foils outside an NIF capsule to verify the conversion of xenon and krypton fission fragments collected at the Radiochemical Analysis of Gaseous Samples (RAGS) facility into total fission yield. We present the calculations needed for this conversion, including the decays in and out of fission fragment chains during the RAGS pump-down of the NIF chamber.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Extending Badger's rule. I. The relationship between energy and structure in hydrogen bonds

Here, we derive a new expression for the strength of a hydrogen bond (V HB ) in terms of the elongation of the covalent bond of the donor fragment participating in the hydrogen bond (Δr HB ) and the intermolecular coordinates R (separation between the heavy atoms) and θ (deviation of the hydrogen bond from linearity). The expression includes components describing the covalent D–H bond of the hydrogen bond donor via a Morse potential, the Pauli repulsion, and electrostatic interactions between the constituent fragments using a linear expansion of their dipole moment and a quadratic expansion of their polarizability tensor. We fitted the parameters of the model using ab initio electronic structure results for six hydrogen bonded dimers, namely, NH 3 –NH 3 , H 2 O–H 2 O, HF–HF, H 2 O–NH 3 , HF–H 2 O, and HF–NH 3 , and validated its performance for extended parts of their potential energy surfaces, resulting in a mean absolute error ranging from 0.07 to 0.31 kcal/mol. The derived expression describes the energy–structure relationship in terms of a single structural parameter, namely, the elongation of the donor’s covalent bond (Δr HB ), and suggests the novel relationship of 8.0 kcal/mol pm −1 (or 0.8 kcal/mol per 0.001 Å elongation). This structural parameter is easily obtained from theory and can serve as the single descriptor of the strength of individual hydrogen bonds.

Santis, Garrett D. [Univ. of Washington, Seattle, ↗
DOE OSTI2026

Global energy balance simulations of shattered pellet injection

The dynamics of shattered pellet injection (SPI) shutdowns are simulated using a time-dependent global energy balance model, based on a modification of the KPRAD framework. The new SPI particle source in the model calculates the ablation of individual pellet fragments that enter the plasma as a temporally resolved plume, thus capturing the effects of earlier fragments on the ablation of those that follow, which has a significant impact on the overall assimilation. Despite the reduced physics and the global averaging of all quantities, results from a large number of DIII-D, KSTAR, and JET experiments are well reproduced, including the plasma cooling timescales, particle assimilation, and current quench (CQ) rates. Cooling timescales and CQ rates are in good agreement for pellets containing as little as ∼1% neon, while particle assimilations are most accurate for neon fractions above ∼15% by number of atoms. Below this, the assimilation tends to be overestimated due to the lack of radial transport in the particle balance, which becomes important in the low-Z limit. Predictive simulations of mixed-composition dual-SPI shutdowns in ITER are compared against those with the 3D non-linear magnetohydrodynamic code JOREK and are found to reproduce overall trends observed in the higher-fidelity modeling across a range of injection scenarios. The general success of the model points to the critical role of energy balance in determining SPI particle assimilation and the subsequent disruption dynamics and highlights the value of these simulations for experimental interpretation and for optimizing the deployment of computationally expensive, higher-fidelity models.

energy balance model↗
DOE OSTI2020

How a raindrop gets shattered on biological surfaces

Many biological surfaces of animals and plants (e.g., bird feathers, insect wings, plant leaves, etc.) are superhydrophobic with rough surfaces at different length scales. Previous studies have focused on a simple drop-bouncing behavior on biological surfaces with low-speed impacts. However, we observed that an impacting drop at high speeds exhibits more complicated dynamics with unexpected shock-like patterns: Hundreds of shock-like waves are formed on the spreading drop, and the drop is then abruptly fragmented along with multiple nucleating holes. Such drop dynamics result in the rapid retraction of the spreading drop and thereby a more than twofold decrease in contact time. Our results may shed light on potential biological advantages of hypothermia risk reduction for endothermic animals and spore spreading enhancement for fungi via wave-induced drop fragmentation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Direct functionalization of C-H bonds by electrophilic anions

Bond formation between two of the most inert molecules, alkanes and [B12X12]2- (X = Cl, Br), is performed in a two step process. Fragmentation of [B12X12]2- in the gas phase generates highly reactive [B12X11]- ions which spontaneously react with alkanes. The reaction mechanism was investigated using tandem mass spectrometry and gas-phase vibrational spectroscopy combined with electronic structure calculations. This effort revealed the unprecedented and counterintuitive electrophilic substitution of a proton in an alkane by a negatively charged ion resulting in a B-C bond formation. The product is a dianionic [B12X11CnH2n+1]2- species, in which H+ is electrostatically bound to the dianion. High flux ion soft-landing was performed to co-deposit [B12X11]- and complex organic molecules (phthalates) in thin layers on surfaces. Molecular structure analysis of the product films revealed that C-H functionalization by [B12X11]- occured in the presence of other more reactive functional groups. This observation demonstrates the utility of highly reactive fragment ions for defined bond formation processes and may pave the way to the use of gas phase ion chemistry for chemical synthesis in the condensed phase.

Warneke, Jonas↗
DOE OSTI2022

Mechanism of tethered agonist-mediated signaling by polycystin-1

Mutations of polycystin-1 (PC1) are the major cause (85% of cases) of autosomal dominant polycystic kidney disease (ADPKD), which is the fourth leading cause of kidney failure. PC1 is thought to function as an atypical G protein-coupled receptor, yet the mechanism by which PC1 regulates G-protein signaling remains poorly understood. A significant portion of ADPKD mutations of PC1 encode a protein with defects in maturation or reduced function that may be amenable to functional rescue. In this work, we have combined complementary biochemical and cellular assay experiments and accelerated molecular simulations, which revealed an allosteric transduction pathway in activation of the PC1 C-terminal fragment. Our findings will facilitate future rational drug design efforts targeting the PC1 signaling function. Polycystin-1 (PC1) is an important unusual G protein-coupled receptor (GPCR) with 11 transmembrane domains, and its mutations account for 85% of cases of autosomal dominant polycystic kidney disease (ADPKD). PC1 shares multiple characteristics with Adhesion GPCRs. These include a GPCR proteolysis site that autocatalytically divides these proteins into extracellular, N-terminal, and membrane-embedded, C-terminal fragments (CTF), and a tethered agonist (TA) within the N-terminal stalk of the CTF that is suggested to activate signaling. However, the mechanism by which a TA can activate PC1 is not known. Here, we have combined functional cellular signaling experiments of PC1 CTF expression constructs encoding wild type, stalkless, and three different ADPKD stalk variants with all-atom Gaussian accelerated molecular dynamics (GaMD) simulations to investigate TA-mediated signaling activation. Correlations of residue motions and free-energy profiles calculated from the GaMD simulations correlated with the differential signaling abilities of wild type and stalk variants of PC1 CTF. They suggested an allosteric mechanism involving residue interactions connecting the stalk, Tetragonal Opening for Polycystins (TOP) domain, and putative pore loop in TA-mediated activation of PC1 CTF. Key interacting residues such as N3074–S3585 and R3848–E4078 predicted from the GaMD simulations were validated by mutagenesis experiments. Together, these complementary analyses have provided insights into a TA-mediated activation mechanism of PC1 CTF signaling, which will be important for future rational drug design targeting PC1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗