Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fluids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A review of the consequences of fluid and electrolyte shifts in weightlessness

This review describes the renal-endocrine mechanisms related to the early losses of fluid-electrolytes from the body during weightlessness as well as their contribution to longer term adaptation of fluid-electrolyte balance. The hypotheses presented were generated by a systematic analysis of body fluid and renal dynamics observed under conditions of actual and simulated spaceflight. These have increased our understanding of the effects of acute headward fluid shifts on renal excretion, the factors promoting excess sodium excretion and the regulation of extracellular fluid composition.

Review↗
DOE OSTI2018

An All Hydrophilic Fluid Diode for Unidirectional Flow in Porous Systems

Abstract A fluid diode that allows fluid flow in one direction but blocks fluid flow in the opposite direction has wide applications including oil recovery, drug delivery, and lab‐on‐a‐chip microfluidics. Many studies are conducted to facilitate directional liquid motion on the solid surface or across thin porous layers. However, the self‐driven one‐way flow inside porous systems still remains a significant challenge. Here, a novel all‐hydrophilic fluid diode (AHFD) made of porous materials with asymmetric pores is reported, which allows capillary flow in a chosen direction. The direction‐dependent flow process and the breakthrough pressure are experimentally and theoretically examined. The proposed AHFD can have many potential applications such as functional protective clothing, microfluidic valve, and oil–water separator, and the idea can be extended to develop other all lyophilic fluid diodes such as oleophilic diode.

Shou, Dahua↗
DOE OSTI2024

Patterned Quasi-Liquid Surfaces for Condensation of Low Surface Tension Fluids

Extensive research concerns dropwise condensation of low surface tension fluids to promote energy efficiency and decarbonization in thermal energy systems. However, it is challenging as these fluids typically result in filmwise condensation. Drawing inspiration from the Namib desert beetle that enhances condensation through patterned wettability, conventional beetle-inspired surfaces excel in water condensation but flood when condensing low surface tension fluids. In this work, a patterned quasi-liquid surface is reported that achieves exceptional dropwise condensation of low surface tension fluids. The surface consists of alternating stripes with low surface energy, that is, a perfluoropolyether (PFPE) and fluorinated quasi-liquid surface (FQLS), that shows ultralow contact angle hysteresis for ethanol and hexane. Further, the PFPE stripes are slightly more slippery, acting as slippery bridges that accelerate droplet coalescence and removal. It is experimentally demonstrated that the striped PFPE-FQLS pattern exhibits a heat transfer coefficient 85%, 330%, and 550% higher than that of PFPE, fluorinated silane, and filmwise condensation, respectively. This study reveals that a high contact angle is desired to sustain dropwise condensation, irrespective of contact angle hysteresis. These findings provide a new paradigm for promoting the dropwise condensation of low surface tension fluids and offer valuable insights into surface design for energy sustainability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Aqueous Diels–Alder reactions for thermochemical storage and heat transfer fluids identified using density functional theory

Thermal storage and transfer fluids have important applications in industrial, transportation, and domestic settings. Current thermal fluids have relatively low specific heats, often significantly below that of water. However, by introducing a thermochemical reaction to a base fluid, it is possible to enhance the fluid's thermal properties. Here, density functional theory (DFT) is used to screen Diels–Alder reactions for use in aqueous thermal fluids. From an initial set of 52 reactions, four are identified with moderate aqueous solubility and predicted turning temperature near the liquid region of water. These reactions are selectively modified through 60 total functional group substitutions to produce novel reactions with improved solubility and thermal properties. Among the reactions generated by functional group substitution, seven have promising predicted thermal properties, significantly improving specific heat (by as much as 30.5%) and energy storage density (by as much as 4.9%) compared to pure water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Thermo‐Flow‐Mechanics‐Fracture Model Coupling a Phase‐Field Interface Approach and Thermo‐Fluid‐Structure Interaction

This work proposes a novel approach for coupling non-isothermal fluid dynamics with fracture mechanics to capture thermal effects within fluid-filled fractures accurately. This method addresses critical aspects of calculating fracture width in enhanced geothermal systems, where the temperature effects of fractures are crucial. The proposed algorithm features an iterative coupling between an interface-capturing phase-field fracture method and interface-tracking thermo-fluid-structure interaction using arbitrary Lagrangian–Eulerian coordinates. We use a phase-field approach to represent fractures and reconstruct the geometry to frame a thermo-fluid-structure interaction problem, resulting in pressure and temperature fields that drive fracture propagation. We developed a novel phase-field interface model accounting for thermal effects, enabling the coupling of quantities specific to the fluid-filled fracture with the phase-field model through the interface between the fracture and the intact solid domain. We provide several numerical examples to demonstrate the capabilities of the proposed algorithm. In particular, we analyze mesh convergence of our phase-field interface model, investigate the effects of temperature on crack width and volume in a static regime, and highlight the method's potential for modeling slowly propagating fractures.

fracture↗
DOE OSTI2024

Rindler fluids from gravitational shockwaves

We study a correspondence between gravitational shockwave geometry and its fluid description near a Rindler horizon in Minkowski spacetime. Utilizing the Petrov classification that describes algebraic symmetries for Lorentzian spaces, we establish an explicit mapping between a potential fluid and the shockwave metric perturbation, where the Einstein equation for the shockwave geometry is equivalent to the incompressibility condition of the fluid, augmented by a shockwave source. Then we consider an Ansatz of a stochastic quantum source for the potential fluid, which has the physical interpretation of shockwaves created by vacuum energy fluctuations. Under such circumstance, the Einstein equation, or equivalently, the incompressibility condition for the fluid, becomes a stochastic differential equation. By smearing the quantum source on a stretched horizon in a Lorentz invariant manner with a Planckian width (similarly to the membrane paradigm), we integrate fluctuations near the Rindler horizon to find an accumulated effect of the variance in the round-trip time of a photon traversing the horizon of a causal diamond.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Fluid Dynamics Effects on Microstructure Prediction in Single-Laser Tracks for Additive Manufacturing of IN625

Single-track laser fusion were simulated using a heat-transfer-solidification-only (HTS) model and its extension with fluid dynamics (HTS_FD) model using a parallel open-source code, which included laminar fluid dynamics, flat-free surface of the molten alloy, heat transfer, phase-change, evaporation, and surface tension phenomena. The results illustrate that the fluid dynamics affects the solidification and ensuing microstructure. For the HTS_FD simulations, thermal gradient, G was found to exhibit a maximum at the extremity of the solidified pool ( i.e. , at the free surface), while for HTS simulations, G exhibited a maximum around the entire edge of the solidified pool. HTS_FD simulations predicted a wider range of cooling rates than the HTS simulations, exhibited an increased spread in the solidification speed, V variation within the melt-pool with respect to the HTS model results. Primary dendrite arm spacing (PDAS) were evaluated based on power law correlations and marginal stability theory models using the ( G , V ) from HTS and HTS_FD simulations to quantify the effect of the fluid dynamics on the microstructure. At low-laser powers and low-scan speeds, the PDAS obtained with the fluid dynamics model (HTS_FD) was larger by more than 30 pct with respect to the PDAS calculated with the simple HTS model. A new PDAS correlation, i.e. , \( \lambda_{1} \left[ {\mu {\text{m}}} \right] = 832\;G\left[ {\text{K/m}} \right]^{ - 0.5} V\left[ {\text{m/s}} \right]^{ - 0.25} \) , which uses the ( G , V ) results from the HTS_FD model was developed and validated against experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Characterization of immiscible fluid displacement processes with various capillary numbers and viscosity ratios in 3D natural sandstone

We characterize the influence of reservoir conditions upon multiphase flow, we calculated fluid displacements (drainage processes) in 3D pore spaces of Berea sandstone using two-phase lattice Boltzmann (LB) simulations. The results of simulations under various conditions were used to classify the resulting two-phase flow behavior into three typical fluid displacement patterns on the diagram of capillary number (Ca) and viscosity ratio of the two fluids (M). In addition, the saturation of the nonwetting phase was calculated and mapped on the Ca–M diagram. We then characterized dynamic pore-filling events (i.e., Haines jumps) from the pressure variation of the nonwetting phase, and linked this behavior to the occurrence of capillary fingering. The results revealed the onset of capillary fingering in 3D natural rock at a higher Ca than in 2D homogeneous granular models, with the crossover region between typical displacement patterns broader than in the homogeneous granular model. Furthermore, saturation of the nonwetting phase mapped on the Ca–M diagram significantly depends on the rock models. These important differences between two-phase flow in 3D natural rock and in 2D homogeneous models could be due to the heterogeneity of pore geometry in the natural rock and differences in pore connectivity. By quantifying two-phase fluid behavior in the target reservoir rock under various conditions (e.g., saturation mapping on the Ca–M diagram), our approach could provide useful information for investigating suitable reservoir conditions for geo-fluid management (e.g., high CO 2 saturation in CO 2 storage).

58 GEOSCIENCES↗
DOE OSTI2026

Mobility of heavy rare earth elements in magmatic-hydrothermal systems: Experimental determination of DyPO 4 solubility in supercritical fluids

Dysprosium (Dy) is part of the heavy rare earth elements (REE) and a critical component in the production of high-performance super magnets used in wind turbines, electric vehicles, and other green technologies. The HREE phosphate, xenotime, is commonly associated with hydrothermal systems, where the mobility, fractionation, and deposition of REE are controlled by the stability of aqueous complexes and solubility of REE minerals which depend on temperature, pressure, and fluid composition (salinity, pH, and ligand availability). Here, we conducted a series of synthetic DyPO 4 solubility experiments in NaCl-HCl-bearing aqueous solutions (pH of 2 at 25 °C) from 500 to 700 °C and 1.5 kbar using externally heated pressure vessels. DyPO 4 displays a strong prograde solubility with temperature across all studied fluid salinities (0–0.5 m NaCl). The DyPO₄ solubility isotherms at 500 °C, 600 °C, and 700 °C show a complex relationship with salinity where DyPO₄ solubility is highest (39.2–1552 ppm at 500–700 °C) in 0 m NaCl solutions, decreases strongly (21–331 ppm at 500–700 °C) in the 0.06 m NaCl solutions and remains relatively constant in the 0.25 m (42.8–248 ppm) and 0.5 m NaCl (40.2–124 ppm) solutions. Thermodynamic modeling suggests that pH increases as a function of temperature and salinity, and controls solubility due to the stability of chloride complexes (i.e., DyCl +2 and DyCl 2 + ) at 500–600 °C, transitioning to hydroxyl complexes (i.e., Dy(OH) 3 0 ) dominating at 700 °C and relatively alkaline pH. Comparison with NdPO 4 solubility data indicates that the light REE in monazite is significantly more soluble than the heavy REE in xenotime in saline fluids at high temperature (500–700 °C), implying efficient light/heavy REE fractionation in supercritical fluids. The lower solubility of DyPO 4 relative to NdPO 4 suggests that at high temperatures, acidic (pH 2–4), low-salinity (∼5 wt% NaCl) fluids will favor the precipitation of xenotime over monazite as it will cool from 700 °C to below 500 °C. These observations align with paragenetic mineral assemblages in NYF pegmatites (e.g., Baveno, Italy), where xenotime commonly immobilizes heavy REE during the high-temperature hydrothermal stages.

58 GEOSCIENCES↗
DOE OSTI2022

Effect of oxidative breakers on organic matter degradation, contaminant mobility and critical mineral release during shale-fracturing fluid interactions in the Marcellus Shale

Oil and gas production from organic-rich shale formations has become viable through advancements in multistage hydraulic fracturing. However, fluctuations in oil and gas prices, coupled with the sharp decline in gas production after the initial days of fracturing operations, drive operators to devise strategies for enhancing hydrocarbon production. The use of highly reactive fracturing fluids that include strong oxidizing agents, also known as breakers, can potentially increase well productivity. The oxidative breakers are used to reduce the viscosity of gel-based fluids after the proppant is transported into fracture zones of the target formation. These breakers can also degrade the organic matter, enhancing the release of hydrocarbons. However, chemical byproducts generated by the interaction of oxidative breakers with the shale matrix have not been extensively studied. Here, this study investigated the fluid-rock interactions between Marcellus Shale and synthetic hydraulic fracturing fluid (HFF) solutions comprising three different oxidative breakers, i.e., ammonium persulfate, sodium bromate, and sodium hypochlorite, commonly used in the Appalachian Basin, USA. Our results demonstrate that the type of oxidizing breakers used in the HFF controlled the type and amount of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) produced. In all HFF reacted effluents, we observed the transformation of VOCs and the presence of organic acids in variable amounts. However, effluents from HFF containing sodium bromate and sodium hypochlorite breakers showed the presence of several halogenated organic compounds. Changes in major ions and mineralogy indicate that carbonate dissolution and barite precipitation were ubiquitous in all shale reacted effluents. Our results also demonstrate that the addition of oxidative breakers increased the concentration of several major and trace elements in the effluents. These elements fall under the critical mineral (CM) or critical element category due to their high demand in emerging technologies and susceptibility to supply chain disruption due to variety of factors. However, before oxidative breakers can be used at a larger field scale to enhance the release and recovery of CM and hydrocarbons, a better understanding is required of the potential environmental impacts associated with the generation and transformation of contaminants during breaker-fluid-rock interaction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

The solubility of ErPO 4 and Er speciation in hydrothermal fluids at varying pH and salinity between 350 and 450 °C

The rare earth elements (REE) are important for the green-energy transition and can be incorporated into the REE phosphates, such as xenotime-(Y), which also hosts heavy REE (Tb– Lu). Xenotime-(Y) is a common accessory mineral in metamorphic rocks and a range of mineral deposits where it controls the mobility of heavy REE, however, the impact of high temperature aqueous fluids on the behavior of heavy REE is largely unknown. Thermodynamic modeling can be utilized as a tool to predict the mobility of REE in hydrothermal aqueous fluids, but must be supported by accurate experimental data. Here, we measured the solubility of endmember synthetic xenotime-structured ErPO4 in NaCl-HCl-NaOH-bearing aqueous solutions at 350 °C and water vapor saturation pressure, at 400 and at 450 °C and 500 bar using batch-type Inconel reactors. Erbium speciation was investigated as a function of pH from 2.8 to 8, where Er chloride species are predominant at acidic conditions (pH <3) and Er hydroxyl complexes are predominant at near- neutral to alkaline conditions (pH >3). At pH 7–9, the measured ErPO 4 solubility (-9.8 to -7.5 log m Er ) is up to 2.5 orders of magnitude lower than thermodynamic predictions (-9.4 to -6.7 log m Er ) using existing thermodynamic databases. At pH 2–3, the predicted ErPO 4 solubility is ~0.5 orders of magnitude higher at 350 °C and ~1 order of magnitude lower at 450 °C compared to experimentally measured Er concentrations. The thermodynamic properties of aqueous Er species were therefore revised in this study. The partial molal Gibbs energy of formation (Δ f G 0 T,P ) for aqueous Er hydroxyl and chloride species are optimized using GEMSFITS and the logarithmic formation constants (logβ n ( Cl,OH) ) were derived at each experimental temperature and pressure. The updated thermodynamic properties for Er hydroxyl species (Er(OH) +2 , Er(OH) 2 + , and Er(OH) 3 0 ) show that their stability shifts to more acidic conditions at and below 400 °C. The Er chloride species (ErCl +2 and ErCl 2 + ) show increased stability compared to Er hydroxyl species at temperatures of 450 °C and 0.01 mol/kg NaCl. The updated thermodynamic properties are implemented into the GEM-Selektor modeling package to investigate the mobility of Er in saline hydrothermal fluids in equilibrium with alkaline rocks. Importantly, the updated properties for Er hydroxyl species result in low Er solubility at rock equilibrated pH conditions due to an expanded hydroxyl predominance zone, but lower aqueous complex stability overall, whereas previous models suggest greater stability for aqueous Er species. Furthermore, ErPO 4 solubility increases with decreasing temperature due to the deprotonation of HCl, which increases the acidity of hydrothermal fluids and the availability of Cl - to complex with the REE. These simulations highlight how fluid-rock reaction and temperature affect the mobility of REE in hydrothermal ore-forming systems.

58 GEOSCIENCES↗
DOE OSTI2013

Fluid geochemistry at the Raft River geothermal field, Idaho, USA: New data and hydrogeological implications

Following a period of exploration and development in the mid-late 1970’s, there was little activity at the Raft River geothermal field for the next ~20 years. U.S. Geothermal Inc. acquired the project in 2002, and began commercial power generation in January 2008. From mid-2004 to present, U.S. Geothermal Inc. has collected geochemical data from geothermal and monitoring wells in the field, as well as other shallow wells in the area. An additional sampling program was completed in July 2010 to measure a wider range of trace elements and key water isotopes (δ 18 O, δD, and 3 H (Tritium)) in the field. The data indicate that the fluid geochemistry in the field is spatially variable and complex, with two distinct deep geothermal fluid types (high vs. low K, Na, Cl, Ca, Li, F concentrations) and two groundwater fluid types. These differences have been interpreted to reflect deep structural controls on fluid pathways in the field, which has compartmentalized the fluids and limited the degree of mixing between them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of flow on uranium speciation in soils impacted by acidic waste fluids

Radioactive acidic liquid waste is a common byproduct of uranium (U) and plutonium (Pu) enrichment and recycling processes whose accidental and planned release has led to a significant input of U into soils and sediments across the world, including at the U.S. DOE's Hanford site (WA, USA). Because of the particularly hazardous nature of U, it is important to predict its speciation when introduced into soils and sediments by acidic waste fluids. Of fundamental importance are the coupled effects of acid-driven mineral transformation and reactive transport on U speciation. To evaluate the effect of waste-fluid residence time and co-associated dissolved phosphate concentrations on U speciation in impacted soils and sediments, uncontaminated surface materials (from the Hanford Site) were reacted with U-containing synthetic acidic waste fluids (pH 2) amended with dissolved phosphate concentrations in both batch (no flow) and flow-through column systems for 7–365 days. By comparing dissolved U behavior and solid phase speciation as a function of flow regimen, we found that the availability of proton-promoted dissolution products (such as Si) to sequester U into uranyl silicates was dependent on waste fluid-sediment contact time as uranyl silicates were not detected in short contact time flow-through systems but were detected in no-flow, long contact time, reactors. Moreover, the dominance of uranyl phosphate as neoprecipitate U scavenger (principally in the form of meta-ankoleite) in phosphate amended systems confirmed the importance of phosphate amendments for an efficient sequestration of U in the soils and sediments. Overall, our experiments suggest that the formation of uranyl silicates in soils impacted by acidic waste fluids is likely to be limited unless reaction products are allowed to accumulate in soil pores, highlighting the importance of investigating soil U speciation in flow-through, transport-driven systems as opposed to no-flow, batch systems. Finally, this study provides insights into uranium speciation and its potential changes under acidic conditions for better prediction of risks and subsequent development of efficient remediation strategies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Validation of SOLPS-ITER simulations with kinetic, fluid, and hybrid neutral models for JET-ILW low-confinement mode plasmas

For JET L-mode plasmas in low-recycling conditions (electron temperature at the outer strike point, T e,ot ≳ 30 eV ), SOLPS-ITER simulations agree within the error bars for the experimental profiles at the low-field side (LFS) divertor target. The peak Balmer-α (Dα ) emission in the LFS divertor agrees within the error bars of the KS3 filterscope diagnostic, but is approximately 30% lower than the peak value of the KT1 spectrometer. Simulations have been performed with fluid, kinetic, and hybrid models for the neutrals. The large fluid-kinetic discrepancies of more than a factor 2 are successfully corrected by using a hybrid fluid-kinetic approach, for which kinetic atoms are transferred to the fluid population when the local Knudsen number of the atom becomes smaller than a user-defined transition Knudsen number Kn t . The hybrid-kinetic discrepancies are limited to a few % for Kn t ≤ 100 . When increasing the upstream density to high-recycling conditions, at the onset of detachment ( T e,ot ≈ 5 eV ), the simulations predict more than a factor 2 lower peak ion saturation current to the LFS divertor than the experiments. Also the Dα emission is underpredicted with approximately a factor 2. For these high-recycling conditions, the fluid-kinetic discrepancies are limited to maximum 50%, which are again corrected by using the hybrid approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Inorganic Alterations in Unconventional Shale Reservoirs: Importance of Additive and Base Fluid Chemistry

The effective development of unconventional petroleum systems requires the use of significant water resources. In an effort to reduce the consumption of freshwater resources for hydraulic fracturing, highly saline produced waters are increasingly recycled for use as a base fluid. However, there are significant knowledge gaps regarding potential water–rock interactions resulting from the introduction of produced waters and associated additives into shale reservoirs such as formation and deposition of mineral scale, which can negatively affect hydrocarbon production through wellbore restriction and damage to hydraulically generated fractures. To assess the impacts of field stimulation practices in the subsurface, a series of laboratory experiments were completed using (a) three distinct sedimentary rock formations of the Midland Basin (Texas, USA) and (b) additives with two different base fluids: municipal fresh water and clean brine. The experimental approach used relevant injection sequences and mixing ratios in specialized reactors for 3 weeks. Static pressurized experiments and nonpressurized time-resolved experiments were undertaken. The resulting solids and liquids were analyzed by using a variety of laboratory- and synchrotron-based techniques. The use of an acid spearhead (15% HCl) resulted in texturing of both clay-rich and calcareous shales, which can temporarily enhance porosity but subsequently result in mineral scale deposition. The primary matrix scale was Fe(III)-bearing phases, which occurred in all experiments regardless of base fluid chemistry. Additionally, strontium sulfate (SrSO 4 ) precipitated on shale surfaces when clean brines were used. It was concluded that clean brine was the main source of Sr 2+ species, while persulfate breaker degradation and oxidation of pyrite were the sources of SO 4 2– . Sulfate scaling was more pronounced in clay-rich shales, suggesting that Sr sorption is important for promoting celestite formation. This work demonstrates that mineral scale deposition is a complex phenomenon, whereby the type and proportions of various mineral phases are determined from reservoir alteration processes and coprecipitation of constituents from injection fluids. In conclusion, the experimental results shown here should be considered when evaluating different base fluids and additives in order to mitigate mineral precipitation in unconventional shale reservoirs, which could result in reservoir degradation.

Jew, Adam D. [SLAC National Accelerator Laboratory↗
DOE OSTI2015

Nanoscopic dynamics of phospholipid in unilamellar vesicles: Effect of gel to fluid phase transition

Dynamics of phospholipids in unilamellar vesicles (ULV) is of interest in biology, medical, and food sciences since these molecules are widely used as biocompatible agents and a mimic of cell membrane systems. We have investigated the nanoscopic dynamics of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) phospholipid in ULV as a function of temperature using elastic and quasielastic neutron scattering (QENS). The dependence of the signal on the scattering momentum transfer, which is a critical advantage of neutron scattering techniques, allows the detailed analysis of the lipid motions that cannot be carried out by other means. In agreement with a differential scanning calorimetry measurement, a sharp rise in the elastic scattering intensity below ca. 296 K indicates a phase transition from the high-temperature fluid phase to the low-temperature solid gel phase. The microscopic lipid dynamics exhibits qualitative differences between the solid gel phase (in a measurement at 280 K) and the fluid phase (in a measurement at a physiological temperature of 310 K). The data analysis invariably shows the presence of two distinct motions: the whole lipid molecule motion within a monolayer, or lateral diffusion, and the relatively faster internal motion of the DMPC molecule. The lateral diffusion of the whole lipid molecule is found to be Fickian in character, whereas the internal lipid motions are of localized character, consistent with the structure of the vesicles. The lateral motion slows down by an order of magnitude in the solid gel phase, whereas for the internal motion not only the time scale, but also the character of the motion changes upon the phase transition. In the solid gel phase, the lipids are more ordered and undergo uniaxial rotational motion. However, in the fluid phase, the hydrogen atoms of the lipid tails undergo confined translation diffusion rather than uniaxial rotational diffusion. The localized translational diffusion of the hydrogen atoms of the lipid tails is a manifestation of the flexibility of the chains acquired in the fluid phase. Because of this flexibility, both the local diffusivity and the confinement volume for the hydrogen atoms increase linearly from near the lipid s polar head group to the end of its hydrophobic tail. Our results present a quantitative and detailed picture of the effect of the gel-fluid phase transition on the nanoscopic lipid dynamics in ULV. Lastly, the data analysis approach developed here has a potential for probing the dynamic response of lipids to the presence of additional cell membrane components.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Supercritical Fluid Adsorption to Weakly Attractive Solids: Universal Scaling Laws

In this study, adsorption of light hydrocarbons (C1–C3) confined in the pores of silica aerogel (nominal density 0.2 g/cm 3 ) was studied experimentally and by computer simulation. Five isotherms of ethane (25.0, 32.0, 32.3, 33.0, and 35.0 °C) were obtained over a temperature range including the critical temperature of the bulk fluid (T c = 32.18 °C) to ~220 bar by the vibrating tube densimetry (VTD) method, which yields unique information impossible to obtain by excess sorption measurements. Two isotherms (35 and 50 °C) of methane adsorption in SiO 2 aerogel were measured far above its critical temperature, T c = -82.59 °C, at 0–150 bar using a gravimetric method. The experimental pore fluid properties of methane, ethane, propane, and CO 2 (obtained earlier by VTD for the same SiO 2 aerogel sample) show behavior conforming to the principle of corresponding states over the entire covered reduced temperature ranges from T r = 0.976 to T r = 1.696. The magnitudes of the excess adsorption maxima and the reduced fluid densities where the maxima occur for C1–C3 hydrocarbons and CO 2 are similar functions of the reduced temperature. This behavior indicates that, at least under the conditions covered in this work, the differences in molecular size and shape have only minor impacts on the solid–fluid interactions underlying the adsorption behavior. Lastly, these findings are supported by large-scale GCMC simulations of a lattice gas confined in the pores of a computer representation of the SiO 2 aerogel framework, yielding excess adsorption isotherms in good agreement with experimental measurements, as well as the underlying microstructures of the adsorbed fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Microbial Community Changes in Hydraulic Fracturing Fluids and Produced Water from Shale Gas Extraction

Microbial communities associated with produced water from hydraulic fracturing are not well understood, and their deleterious activity can lead to significant increases in production costs and adverse environmental impacts. In this study, we compared the microbial ecology in prefracturing fluids (fracturing source water and fracturing fluid) and produced water at multiple time points from a natural gas well in southwestern Pennsylvania using 16S rRNA gene-based clone libraries, pyrosequencing, and quantitative PCR. The majority of the bacterial community in prefracturing fluids constituted aerobic species affiliated with the class Alphaproteobacteria. However, their relative abundance decreased in produced water with an increase in halotolerant, anaerobic/facultative anaerobic species affiliated with the classes Clostridia, Bacilli, Gammaproteobacteria, Epsilonproteobacteria, Bacteroidia, and Fusobacteria. Produced water collected at the last time point (day 187) consisted almost entirely of sequences similar to Clostridia and showed a decrease in bacterial abundance by 3 orders of magnitude compared to the prefracturing fluids and produced water samplesfrom earlier time points. Geochemical analysis showed that produced water contained higher concentrations of salts and total radioactivity compared to prefracturing fluids. This study provides evidence of long-term subsurface selection of the microbial community introduced through hydraulic fracturing, which may include significant implications for disinfection as well as reuse of produced water in future fracturing operations.

03 NATURAL GAS↗