Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Measurement of the QE Map

113 MHz SRF gun utilized CsK 2 Sb and Na 2 KSb cathodes, which were irradiated with a pulsed green laser with a wavelength of 0.53 microns. The drive laser generated 78 kHz pulses with an acousto-optic modulator selecting the desired number of pulses reaching the cathode. The operator can select the aperture size, defining the laser spot diameter on the cathode, and the power level, which is controlled by a rotating polarizer. The laser power reaching the cathode can be measured with a meter based on a photodiode. The quantum efficiency (QE) of a photocathode serves as a primary indicator of its state. Small QE renders the cathode unusable when the desired bunch charge cannot be achieved. Strong variations in the quantum efficiency on the cathode surface might lead to the growth of the beam emittance due to the space charge effects. We have created a routine to measure the distribution of the QE on the cathode. The operator selects the aperture size, the central spot location, and the scan ranges for both planes. The scan starts from the central spots and proceeds along a spiral-like trajectory, making N rounds. The number of rounds can be chosen, and the total number of measured points is (2N+1) 2 . The laser spot movement is shown in Fig. 1.

43 PARTICLE ACCELERATORS↗

Elevating SolTrace's Capabilities for the Next Generation of Concentrating Solar Analysis

SolTrace is an open-source Monte Carlo ray tracing software developed at NREL. SolTrace can characterize concentrating solar thermal (CST) collector optical performance and is CST technology agnostic. Shown in Fig. 1, SolTrace is a foundational tool in NREL's CST system and component modeling suite. SolTrace's generic surface elements can flexibly model novel collector and receiver designs to predict spatial and temporal flux distributions - critical to understand for CST component design, performance prediction, and system integration. Since its initial development, SolTrace has over 1,650 references on Google Scholar, over 9,800 downloads since 2017, and has served the CST research and development community as a benchmark of 3rd party verification. SolTrace provides users with many options for defining surface shape and boundaries. However, SolTrace provides limited documentation which can result in a steep learning curve for new users. Additionally, SolTrace lacks the computational performance required to evaluate optical performance of a CST system over the course of a year and/or iteratively over design parameters in a timely manner. To address this, we are working towards a new release of SolTrace that enables increased computational throughput by implementing ray tracing acceleration structures and enabling GPU parallelization. Additionally, we are working to improve SolTrace's usability, accessibility, and maintainability by (1) automating solar position time-dependent simulation processes, (2) creating general CST collector templates of grouped elements, (3) updating the user interface to better visualize model inputs and outputs, and (4) creating a user support network through forums, "how to" videos, and documentation.

14 SOLAR ENERGY↗

Bayesian Optimization of The Relativistic Heavy Ion Collider Luminosity via s * Control

A state-of-the-art jet detector named sPHENIX was proposed, commissioned, and operated at the Rel ativistic Heavy Ion Collider (RHIC) from 2023 to 2025. This detector featured precision tracking and calorime try that enable high-statistics studies of the Quark Gluon Plasma through jet modification, upsilon suppres sion, and open heavy flavor production. The innermost component of the three sPHENIX tracking systems is the Monolithic-Active-Pixel-Sensor-based Vertex Detec tor (MVTX) (Fig. 1), which has an acceptance within | s | < 0.1m of the interaction point (IP).

43 PARTICLE ACCELERATORS↗

Assessment of BPM options for the EIC Beam Accumulator Ring

The electron injection system for the Electron-Ion Collider (EIC) at BNL is designed to provide a beam of polarized electrons, which is crucial for studying the structure of protons and atomic nuclei. The Beam Accumulator Ring (BAR) is a part of the injection chain between the 750 MeV linear accelerator and the Rapid Cycling Synchrotron (RCS), which accelerates the beam up to full energy (5–18 GeV). The functional role of the BAR is to accumulate the charge injected from the linear accelerator in order to achieve the high intensity of the polarized electron beam required by the specifications for injection into the RCS. This objective will be realized through the sequential injection of bunches with a charge of 1.1 nC at a repetition rate of 30 Hz. Once the charge of a single bunch reaches 28 nC, the beam will be extracted from the BAR and injected into the RCS. The beam instrumentation needs to provide reliable measurements with the required accuracy over the dynamic range from 0.1 nC (one tenth of a typical injected bunch charge) to 32 nC – the maximum expected accumulated current. There are 10 Beam Position Monitors (BPMs) in the ring, 1 extra button-electrode assembly for the RF system, and 8 BPMs in the beam transport lines. The BPM locations are shown in Fig. 1, marked by blue rectangles. The ring BPMs will be capable of both average orbit and turn-by-turn measurement modes. Accurate measurement of the beam position with a large horizontal offset requires polynomial correction of the BPM nonlinearity.

43 PARTICLE ACCELERATORS↗

Reconstruction of 6D Phase Space

A ‘Phase Space’ is a mathematical representation of all possible physical states of matter of a physical volume or system. Particle beams at Fermilab exist in a six-dimensional phase space: three position dimensions, and three momentum dimensions. To ‘reconstruct’ that space means to take measurement data from virtual detectors along those beams and map out where particles are and how they’re moving, using computational methods. In this experiment, we simulated a particle beam (Fig 1) and used the position distribution of each particle at each detector to map out the magnitude of the beam’s initial momentum.

Shirlee, Jermaine [DuPage Coll.]↗

7th International Workshop on Microbeam Probes of Cellular Radiation Response

The extended abstracts that follow present a summary of the Proceedings of the 7th International Workshop: Microbeam Probes of Cellular Radiation Response, held at Columbia University’s Kellogg Center in New York City on March 15–17, 2006. These International Workshops on Microbeam Probes of Cellular Radiation Response have been held regularly since 1993 (1–5). Since the first workshop, there has been a rapid growth (see Fig. 1) in the number of centers developing microbeams for radiobiological research, and worldwide there are currently about 30 microbeams in operation or under development. Single-cell/single-particle microbeam systems can deliver beams of different ionizing radiations with a spatial resolution of a few micrometers down to a few tenths of a micrometer. Microbeams can be used to addressquestions relating to the effects of low doses of radiation (a single radiation track traversing a cell or group of cells), to probe subcellular targets (e.g. nucleus or cytoplasm), and to address questions regarding the propagation of information about DNA damage (for example, the radiation-induced bystander effect). Much of the recent research using microbeams has been to study low-dose effects and ‘‘non-targeted’’ responses such as bystander effects, genomic instability and adaptive responses. This Workshop provided a forum to assess the current state of microbeam technology and current biological applications and to discuss future directions for development, both technological and biological. Over 100 participants reviewed the current state of microbeam research worldwide and reported on new technological developments in the fields of both physics and biology.

59 BASIC BIOLOGICAL SCIENCES↗

Estuarine Habitats for Juvenile Salmon in the Tidally-Influenced Lower Columbia River and Estuary : Reporting Period September 15, 2008 through May 31, 2009.

This work focuses on the numerical modeling of Columbia River estuarine circulation and associated modeling-supported analyses conducted as an integral part of a multi-disciplinary and multi-institutional effort led by NOAA's Northwest Fisheries Science Center. The overall effort is aimed at: (1) retrospective analyses to reconstruct historic bathymetric features and assess effects of climate and river flow on the extent and distribution of shallow water, wetland and tidal-floodplain habitats; (2) computer simulations using a 3-dimensional numerical model to evaluate the sensitivity of salmon rearing opportunities to various historical modifications affecting the estuary (including channel changes, flow regulation, and diking of tidal wetlands and floodplains); (3) observational studies of present and historic food web sources supporting selected life histories of juvenile salmon as determined by stable isotope, microchemistry, and parasitology techniques; and (4) experimental studies in Grays River in collaboration with Columbia River Estuary Study Taskforce (CREST) and the Columbia Land Trust (CLT) to assess effects of multiple tidal wetland restoration projects on various life histories of juvenile salmon and to compare responses to observed habitat-use patterns in the mainstem estuary. From the above observations, experiments, and additional modeling simulations, the effort will also (5) examine effects of alternative flow-management and habitat-restoration scenarios on habitat opportunity and the estuary's productive capacity for juvenile salmon. The underlying modeling system is part of the SATURN1coastal-margin observatory [1]. SATURN relies on 3D numerical models [2, 3] to systematically simulate and understand baroclinic circulation in the Columbia River estuary-plume-shelf system [4-7] (Fig. 1). Multi-year simulation databases of circulation are produced as an integral part of SATURN, and have multiple applications in understanding estuary/plume variability, the role of the estuary and plume on salmon survival, and functional changes in the estuary-plume system in response to climate and human activities.

13 HYDRO ENERGY↗

NDCX-II project commencing at LBNL

Earlier this year, the U.S. Department of Energy Office of Fusion Energy Sciences approved the NDCX-II project, a second-generation Neutralized Drift Compression eXperiment. NDCX-II is a collaborative effort of scientists and engineers from Lawrence Berkeley National Laboratory (LBNL), Lawrence Livermore National Laboratory (LLNL), and the Princeton Plasma Physics Laboratory (PPPL), in a formal collaboration known as the Virtual National Laboratory for Heavy Ion Fusion Science (HIFS-VNL). Supported by $11 M of funding from the American Recovery and Reinvestment Act, construction at LBNL commenced in July of 2009, with completion anticipated in March of 2012. Applications of this facility will include studies of: the basic physics of the poorly understood 'warm dense matter' regime of temperatures around 1 eV and densities near solid, using uniform, volumetric ion heating of thin foil targets; ion energy coupling into an ablating plasma (such as that which occurs in an inertial fusion target) using beams with time-varying kinetic energy; space-charge-dominated ion beam dynamics; and beam focusing and pulse compression in neutralizing plasma. The machine will complement facilities at GSI in Darmstadt, Germany, but will employ lower ion kinetic energies and commensurately shorter stopping ranges in matter. Much of this research will contribute directly toward the collaboration's ultimate goal of electric power production via heavy-ion beam-driven inertial confinement fusion ('Heavy-Ion Fusion', or HIF). In inertial fusion, a target containing fusion fuel is heated by energetic 'driver' beams, and undergoes a miniature thermonuclear explosion. Currently the largest U.S. research program in inertial confinement is at Livermore's National Ignition Facility (NIF), a multibillion-dollar, stadium-sized laser facility optimized for studying physics issues relevant to nuclear stockpile stewardship. Nonetheless, NIF is expected to establish the fundamental feasibility of fusion ignition on the laboratory scale, and thus advance this approach to fusion energy. Heavy ion accelerators have a number of attributes (such as efficiency, longevity, and use of magnetic fields for final focusing) that make them attractive candidates as Inertial Fusion energy (IFE) drivers As with LBNL's existing NDCX-I, the new machine will produce short ion pulses using the technique of neutralized drift compression. A head-to-tail velocity gradient is imparted to the beam, which then shortens as it drifts in neutralizing plasma that suppresses space-charge forces. NDCX-II will make extensive use of induction cells and other hardware from the decommissioned ATA facility at LLNL. Figure (1) shows the layout of the facility, to be sited in LBNL's Building 58 alongside the existing NDCX-I apparatus. This second-generation facility represents a significant upgrade from the existing NDCX-I. It will be extensible and reconfigurable; in the configuration that has received the most emphasis, each NDCX-II pulse will deliver 30 nC of ions at 3 MeV into a mm-scale spot onto a thin-foil target. Pulse compression to {approx} 1 ns occurs in the accelerator as well as in the drift compression line; the beam is manipulated using suitably tailored voltage waveforms in the accelerating gaps. NDCX-II employs novel beam dynamics. To use the 200 kV Blumlein power supplies from ATA (blue cylinders in the figure), the pulse duration must first be reduced to less than 70 ns. This shortening is accomplished in an initial stage of non-neutral drift compression, downstream of the injector and the first few induction cells. The compression is sufficiently rapid that fewer than ten long-pulse waveform generators are needed, with Blumleins powering the rest of the acceleration. Extensive simulation studies have enabled an attractive physics design; these employ both a new 1-D code (ASP) and the VNL's workhorse 2-D/3-D code Warp. Snapshots from a simulation movie (available online) appear in Fig. 2. Studies on a dedicated test stand are quantifying the performance of the ATA hardware and of pulsed solenoids that will provide transverse beam confinement (ions require much stronger fields than the electrons accelerated by ATA). For more information, see the recent article in the Berkeley Lab News and references therein. Joe Kwan is the NDCX-II project manager and Alex Friedman is the leader for the physics design.

43 PARTICLE ACCELERATORS↗

RHIC low energy beam loss projections

For RHIC low-energy operations, we plan to collide Au beams with energies of E = 2:5-10 GeV/u in RHIC. Beams are injected into collision optics, and RHIC runs as a storage ring with no acceleration. At these low energies, observed beam lifetimes are minutes, with measured beam lifetimes of 3.5 min (fast) and 50 min (slow) at E=4.6 GeV/u in the March 2008 test run. With these lifetimes we can operate RHIC as a storage ring to produce reasonable integrated luminosity. This note estimates beam losses and collimator/dump energy deposition in normal injection modes of low energy operation. The main question is whether a normal injection run is feasible for an FY10 10-15 week operations run from a radiation safety perspective. A peripheral question is whether continuous injection operations is feasible from a radiation safety perspective. In continuous injection mode, we fill both rings, then continuously extract and reinject the oldest bunches that have suffered the most beam loss to increase the overall integrated luminosity. We expect to gain a factor of 2-3 in integrated luminosity from continuous injection at lowest energies if implemented[1]. Continuous injection is feasible by FY11 from an engineering perspective given enough effort, but the required extra safety controls and hardware dose risk make it unappealing for the projected luminosity improvement. Low-energy electron cooling will reduce beam losses by at least an order of magnitude vs normal low-energy operations, but low energy cooling is only feasible in the FY13 timescale and therefore beyond the scope of this note. For normal injection low energy estimates we assume the following: (1) RHIC beam total energies are E=2.5-10 GeV/u. (Continuous injection mode is probably unnecessary above total energies of E=7-8 GeV/u.); (2) RHIC operates only as a storage ring, with no acceleration; (3) 110 bunches of about 0.5-1.0 x 10{sup 9} initial bunch intensities (50-100% injection efficiency, likely conservative); (4) 90% collimation efficiency, with 10% of beam losses elsewhere. This is considered mildly conservative [2]; (5) Beam lifetimes range from about 1 minute (E=2.5 GeV/u) to 20 minutes (E=7-8 GeV/u); (6) The primary beam loss mechanism is space charge/IBS blowup of transverse emittance. This implies that most beam is lost at transverse apertures, particularly abort kickers and collimators. Mar 11 2008 test run data also shows some mild chronic losses around the other IR triplets. We were not using collimators during this test run. (See Fig. 1.); and (7) The RHIC ASE states that the 'maximum number of heavy ions in each ring (is) to be less than the equivalent of 2.4 x 10{sup 11} Au ions at 100 GeV/u' [3]. The total stored beam energy of this beam is 9.5 x 10{sup 15} GeV-u.

43 PARTICLE ACCELERATORS↗

Assessment of Latent Heat Reservoirs for Thermal Management of QCW Laser Diodes

There is great interest in improving the thermal management of laser diodes intended for use as pumps in inertial confinement fusion systems. Laser diode power is currently constrained by heat dissipation in the diodes. Diodes typically dissipate a quantity of heat that is comparable to their optical power output. This heating of the diode junction causes a thermal rollover that prevents the output power from scaling linearly with current drive, and also results in reliability limits due to catastrophic failure at diode mirror facets. For the pulsed, quasi-continuous wave (QCW) operating mode employed for LIFE and certain DOD applications, {approx}5 kW/cm{sup 2} of heat must be removed on timescales of {approx}100{micro}s, which is determined by thermal paths located within {approx}200 {micro}m of the laser junction. For these reasons, QCW thermal management is extremely challenging. Reducing the diode junction temperature enables more efficient operation, reduced thermal chirp, and operation at higher output power without compromised reliability - which improves the diode costs as measured in $/W. We have proposed the use of latent heat reservoirs to improve thermal management of diodes used in pulsed, quasi-continuous wave (QCW) operation. Our basic concept involves placement of a reservoir of low-melting-point metal within a few hundred microns of the laser junction, as in Fig. 1-1. This metal's latent heat of fusion maintains a nearly constant temperature (like a cold plate) in the very near vicinity of the diode junction. This cold reservoir creates large thermal gradients, which in turn are anticipated to drive a large heat flow from the diode. In contrast, conventional QCW devices rely on thermal diffusion into a large solid mass which cannot be held at a fixed temperature, which significantly limits the thermal extraction. Our operational concept involves phase changes within the reservoir during every QCW pulse. During the early portion of the pulse, heating of the diode and its surrounding material initiates melting within the latent heat reservoir. This phase change results in a near-constant reservoir temperature that facilitates heat transfer. During the long ({approx}100 ms) time between QCW pulses, the reservoir metal resolidifies. A simple back-of-the-envelope calculation based on Gallium metal shows that a 50 {micro}m thick Gallium reservoir is sufficient to absorb all heat generated by a 350 {micro}s pulse at 5 kW/cm{sup 2}. While this calculation shows that a latent heat reservoir can provide sufficient capacity to handle the magnitude of heat generated, it does not address the transient change in the diode junction temperature, which depends on details the heat flow into and through the reservoir. For this reason, we undertook a set of numerical experiments to quantitatively assess the impact of latent heat reservoirs on junction temperature. This report documents the results of these simulations.

42 ENGINEERING↗

Annual Report for 2008 - 2009 Detection Monitoring at the Environmental Management Waste Management Facility, Oak Ridge, Tennessee

This annual Environmental Monitoring Report (EMR) presents results of environmental monitoring performed during fiscal year (FY) 2009 (October 1, 2008 - September 30, 2009) at the Environmental Management Waste Management Facility (EMWMF). The EMWMF is an operating state-of-the-art hazardous waste landfill located in Bear Creek Valley (BCV) west of the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12) on the DOE Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee (Appendix A, Fig. A.1). Opened in 2002 and operated by a DOE prime contractor, Bechtel Jacobs Company LLC (BJC), the EMWMF was built specifically to accommodate disposal of acceptable solid wastes generated from Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial actions for former waste sites and buildings that have been impacted by past DOE operations on the ORR and at DOE sites off the ORR within the state of Tennessee. Environmental monitoring at the EMWMF is performed to detect and monitor the impact of facility operations on groundwater, surface water, stormwater, and air quality and to determine compliance with applicable or relevant and appropriate requirements (ARARs) specified in governing CERCLA decision documents. Annually, the EMR presents an evaluation of the groundwater, surface water, stormwater, and air monitoring data with respect to the applicable EMWMF performance standards. The purpose of the evaluation is to: (1) identify monitoring results that indicate evidence of a contaminant release from the EMWMF to groundwater, surface water, stormwater, or air, and (2) recommend appropriate changes to the associated sampling and analysis requirements, including sampling locations, methods, and frequencies; field measurements; or laboratory analytes that may be warranted in response to the monitoring data. Sect. 2 of this annual EMR provides background information relevant to environmental monitoring at the landfill, including short descriptions of the facility, the hydrogeologic setting, CERCLA decision document requirements for environmental monitoring, and a summary of the EMWMF monitoring history to date. Sect. 3 identifies the respective groundwater, surface water, stormwater, and air monitoring locations at the EMWMF and outlines the associated sampling frequencies, field measurements, and laboratory analytes. Sect. 4 presents a concise technical evaluation of the groundwater, surface water, stormwater, and air monitoring data. Sect. 5 summarizes key monitoring results and data evaluation conclusions along with any recommended changes to groundwater, surface water, stormwater, or air monitoring at the EMWMF. Sect. 6 lists the documents and other technical reports referenced in the preceding narrative sections. Maps and other illustrations referenced in the narrative sections of this annual EMR are in Appendix A. Referenced summary tables of FY 2009 environmental monitoring data are in Appendix B (Groundwater), Appendix C (Surface Water), Appendix D (Stormwater), and Appendix E (Ambient Air).

54 ENVIRONMENTAL SCIENCES↗

Structural/magnetic phase transitions and superconductivity in Ba(Fe 1-x TM x ) 2 As 2 (TM=Co, Ni, Cu, Co/Cu, Rh and Pd) single crystals

Since its discovery in 1911, superconductivity has been one of the most actively studied fields in condensed matter physics and has attracted immense experimental and theoretical effort. At this point in time, with more and more superconductors discovered in elements, alloys, intermetallic compounds and oxides, it is becoming clear that superconductivity is actually not so rare in nature. Almost half of the elements in the periodic table and hundreds of compounds have been found to be superconducting. Fig. 1.1 shows the milestones in discovering higher T c superconductors. Among the elemental superconductors, Niobium has the highest superconducting transition temperature, T c , of 9.5 K. This record held for more than ten years, until the discovery of niobium nitride which superconducts below 16 K. It took another thirty years for T c to increase from 16 K in niobium nitride to 23 K in niobium germanium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Linac Sector 21-30 'QE' Quadrupole Magnet Excitation in LCLS Operation

The existing SLAC linac quadrupole magnets, described as the 'QE' quadrupoles, are designed for excitation currents up to 200 A with length-integrated gradients up to 100 kG needed to focus up to 50-GeV electron or positron beams. The eight 'QE' magnets within a linac sector are powered in series on a single 200-A bulk power supply, and each magnet in sectors 21-29 also includes a 20-A booster supply (adds 0-20 A to each magnet) for gradient tapering within the sector. Sector 30 is different again with individual 200-A power supplies per magnet. The LCLS will use these same quadrupole magnets, mostly in their existing locations and with their present power supplies, but for an electron energy range of 0.25-14 GeV. This much lower beam energy will require good power supply regulation ({le} 0.05% rms for f > 0.5 Hz) [1] and accurate field excitation at much lower currents, as low as a few amperes. The present (pre-2006) gradient-to-current polynomials (IVBU) in the SLC database are based on magnetic measurements at excitation currents above 20 A, and are not accurate in extrapolation below about 10 A. For this reason the IVBU polynomials for all 'QE' quadrupoles in sectors 21-30 will be updated in 2007 for LCLS operation. Magnets beyond Q21601 will be updated with a new generic polynomial (with polarity considerations) based on magnetic measurements from zero current all the way up to 200 A, with additional data taken in the 0-20 A range for accuracy in LCLS mode (see Fig. 1). In addition, the first five LCLS 'QE' magnets (Q21201, Q21301, Q21401, Q21501, and Q21601), most of which run at the lowest currents of <3 A, have been individually measured and fitted with a specific polynomial to meet their special settings in LCLS mode. All changes will continue to fully support 30-50 GeV linac operations. This note describes these changes and the method used to arrive at this solution. Regulation tests have already been run on both the bulk and booster power supplies which demonstrate a regulation level below 0.05% rms [1]. Table 2 lists a summary of the gradient-to-current polynomials needed in 2007 for all 'QE' magnets from sector-21 to 30.

43 PARTICLE ACCELERATORS↗

Quis custodiet ipsos custodies: who watches the watchmen?

Should this be said again? No cell is an island and in tissue-specificity and cancer, context is supreme. Decades ago, seminal recombination experiments illustrated the dominant role of mammary mesenchyme in directing epithelial development, and strongly suggested that the microenvironment plays a significant role also in the manifestation of carcinoma. More direct evidence for such functions came from a study demonstrating that an unadulterated microenvironment can suppress the malignant phenotype and re-direct tumor cells to give rise to normally functioning tissues and indeed healthy mice. One may wonder why such a stunning finding did not convince the scientific community to pay more attention to the role of context. The answers are complex, not the least of which is that concomitantly with this finding, the roles of oncogenes and mutations were being discovered. That excitement carried the day, specially because no one subsequently determined whether or not these mice generated from malignant cells contained tumorigenic mutations, and no new group reproduced the work. The following decade saw the discovery that even potent oncogenes could be ruled by context, and another couple of decades later it was shown that similar reprogramming of metastatic melanoma by an embryonic microenvironment was possible. There are many more examples which are not as clear cut, but are nevertheless compelling. The extensive literature of two-stage carcinogenesis, namely initiation and progression, indeed clearly indicates that 'initiation' and DNA damage alone are not sufficient to allow carcinogenesis. Implicit in these findings is: once a tumor or an oncogene, not always a tumor or an oncogene. A renewed focus on the tumor microenvironment as a therapeutic target has also led to the recognition that markers within the microenvironment could have predictive power. Two recently published reports identifying 'stromal signatures' in breast cancer patients prognostic for patient survival and predictive of response to chemotherapeutic treatment provide proof of this concept. In the current issue of The American Journal of Pathology, two independent studies identify a novel stromal marker, caveolin (Cav)-1, which predicts clinical outcome of breast cancer patients irrespective of its expression in tumor epithelium. Cav-1 is a scaffolding protein essential to the structure of caveolae, 'little caves' or invaginations in cellular plasma membranes. Cav-1 recruits and arranges lipids and proteins to these membrane sites to function in endocytosis and signal transduction. The observation that Cav-1 expression is attenuated in oncogenically transformed cells led to exploration of whether Cav-1 loss in mammary epithelium was causative. Although mechanistic data suggested that Cav-1 null mice exhibited aberrant epithelial growth, and that forcing Cav-1 expression in breast cancer cell lines inhibited growth and metastases in xenograft models, a clinical link proved elusive. However, MMTV-PyMT tumors transplanted into the fat pads of Cav-1 knockout mice displayed significantly enhanced growth (vs. wild-type mice), motivating investigation of whether stromal Cav-1 expression correlates with human breast cancer patient survival. This is precisely what Sloan et al. and Witkiewicz, Dasgupta, et al. demonstrate in this issue of AJP. Using tissue microarray data in conjunction with breast tumor sections and extensive patient survival data, Sloan et al. demonstrate that strong stromal Cav-1 expression is associated with smaller breast tumor size and grade, and is highly predictive of increased survival (Fig. 1). Patients with positive expression of stromal Cav-1 had a 91% ten year survival rate, vs. a 43% survival rate for patients lacking stromal Cav-1 expression. Importantly, there was no correlation between Cav-1 expression in the tumor epithelium and clinical outcome in either tissue arrays or tumor sections.

59 BASIC BIOLOGICAL SCIENCES↗

Vegetation Inventory of Oak-Hickory Forest at Missouri Ozark (MOFLUX) Site: 2004-2017

Vegetation inventory observations have been taken during years 2004 through 2017 at the second-growth upland oak-hickory forest at the Missouri Ozark AmeriFlux (MOFLUX) site. The MOFLUX site is located in the University of Missouri Baskett Wildlife Research area (BWREA), situated in the Ozark Border Region of central Missouri, USA, and is part of the AmeriFlux network (site ID: US-MOz). During 2003–2004, 24 circular vegetation plots (each 0.08 hectares) were established and individuals with diameter at breast height (DBH; 1.3 meters (m) above the ground); >9 cm were inventoried. The plots were situated 50 m apart on 5 linear transects radiating out from the MOFLUX flux tower base in southeast, south, southwest, west and northwest directions—there were 5 plots per transect except for the northwest one, which had only 4 due to the presence of a small pond at the terminus (Fig. 1). On each plot, living individuals were identified with numbered aluminum tags, identified to species, measured for DBH, and geographic position measured using a global positioning system (GPS). In subsequent years, mortality observations are made at approximately monthly intervals during the growing season, ingrowth is added annually in the autumn, and DBH of all individuals is measured at two to three-year intervals, with DBH observations in the current record occurring in 2005, 2008, 2011, 2013, and 2016. Using these continuous observations of tree mortality along with predawn leaf water potential (Pallardy et al., 2018) at the MOFLUX site provide insight in how the mortality of important tree species vary and how such variations may be predicted. This dataset contains one data file in comma separate (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

Litter Production of Oak-Hickory Forest at Missouri Ozark (MOFLUX) Site: 2003-2022

This dataset contains measurements of litter production at the second-growth upland oak-hickory forest at the Missouri Ozark AmeriFlux (MOFLUX) site. The MOFLUX site is located in the University of Missouri Baskett Forest situated in the Ozark Border Region of central Missouri, USA, and is part of the AmeriFlux network (site ID: US-MOz). During 2003, 24 circular vegetation plots (each 0.08 hectares) were established in the MOFLUX forest. The plots were situated 50 meters apart on 5 linear transects radiating out from the flux tower base in southeast, south, southwest, west, and northwest directions—there were 5 plots per transect except for the northwest one, which had only 4 due to the presence of a small pond at the terminus (Fig. 1). Litter measurements were initiated in October 2003 and continue to the present. Data through 2022 are reported in this dataset. On each plot, two subplots were established for the collection of litter. Subplots were setup using a stratified random design to ensure the collectors were not immediately adjacent to one another. Litter collectors were usually emptied at monthly intervals, or less during the autumn leaf drop. Samples were dried to constant mass and then sorted before determining the dry mass of leaf, vegetative and woody litter. These litter data have been valuable in modeling efforts to examine the impacts of intensifying moisture extremes (i.e., moisture excess and deficit conditions) on soil carbon cycling. More recent data will be added periodically with no changes to previously released data or the format and structure of the data file. This dataset contains one data file in comma separate (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

Ozonolysis of Yakut boghead coal in chloroform

The process of ozonization and the composition of the ozonolytic degradation products of Yakut boghead coal in chloroform were studied. Water-soluble products consisted of C{sub 2}-C{sub 11} dicarboxylic acids with maximum concentrations of C{sub 4} and C{sub 6} acids. 9 refs., 2 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

Theoretical principles of use of coal fractions with different densities for combustion

It is reasonable to complement the conventional preparation of steam coal involving the removal of ash components and pyritic sulfur by the isolation of the lightest organic fractions, which possess enhanced performance characteristics. These fractions are smoothly saleable both on the domestic and world markets for effective pulverized-coal combustion via new combustion technologies. Heavier (inertinite) fractions of the coal preparation concentrate marketed at lower prices can be considered appropriate fuel for burning in circulating fluidized-bed combustion systems. 13 refs., 5 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗