Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Environments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

RF Environment Data Analysis for UAS Operations

As the usage of radio frequency spectrum and uncrewed aircraft systems continue to grow, the radio frequency environment and its implications to flight safety should be understood. This is important to ensure control and command links as well as data collection links maintain strong communications during flight. NASA System-Wide Safety (SWS) is currently developing standards of flight safety but lacks methods for establishing confidence in the availability of radio frequency space to make a go/no-go decision for drone flights. This study examines information about the radio modules used by SWS and how they interact with the RF environment though analysis of historical spectrum data. This review studies the potential effectiveness of observing the power spread and occupancy methods as they apply to the flight system radios. It has been determined that viewing the frequency and time when the environment is greater than a threshold which indicates potential interference levels may give insight into the patterns of spectrum usage.

Radio Frequency↗
NASA NTRSDate not supplied

All-Metal Antennas for Applications in Extreme Space Environments

The feasibility of an all-metal antenna for transmission of science data by spacecraft, landers, and rovers operating in the extreme environment of space is investigated. The all-metal antenna is of the short backfire type with a waveguide feed and generates a circularly polarized radiation. The investigation includes the modeling, design, fabrication, and characterization of the antenna. The paper summarizes the preliminary results. Potential applications of an all-metal antenna include communication systems required to operate in the extreme hot environment of Venus and in the extreme cold and high radiation environment of Jupiter’s icy moon.

Antennas↗
NASA NTRSDate not supplied

Atomic Oxygen Environment, Effects and Simulation

Atomic oxygen is the most predominant constituent in the low Earth orbital environment between the altitudes of 180 and 650 km. It is also a major constituent of the Mars orbital environment. It is very chemically reactive and can oxidize materials on the outside of spacecraft. In many cases the reaction products are volatile which can lead to mechanical failure. Stable oxides can also form that change the optical or thermal properties of the material. The importance of understanding atomic oxygen reactions with materials has led to both flight experiments in low Earth orbit and ground-based testing in vacuum chambers containing atomic oxygen to study its’ effect on materials. This presentation will focus on defining atomic oxygen environments, discussing atomic oxygen effects on spacecraft materials, reviewing some methods of atomic oxygen simulation, and discussing differences in ground-based testing and space testing as well as synergistic effects.

atomic oxygen, space environment, ground-based tes↗
NASA NTRSDate not supplied

Materials for Power Transmission in Extreme Environments

NASA’s goal for a sustained human presence on the Moon and a future Lunar economy requires the development of novel power transmission materials for extreme environments. As an increasing number of public and private entities set their sights towards a future on the Moon, the demand for surface power will dramatically increase – potentially up to megawatt levels. A Lunar economy is envisioned to include a human habitat, manned and unmanned science exploration assets, excavation rovers and systems, and large-scale infrastructure construction such as solar arrays and power grids. A NASA trade study estimated that 1 to 3 km of power transmission lines (1 to 3 KV ac and dc) will be needed over time. Current high power and voltage SOA cables/wire can easily exceed 1 kg/m where mass is not as critical. Connectors, deployment spools and robots further increase the subsystem mass significantly increasing costs. On the other hand, advances in aeronautics provides path towards space missions. The operating environment on the Moon presents substantial risk to safe and reliable power transmission due to space weathering and degradation. These challenges include cosmic and UV radiation, extreme temperatures swings, the electrostatic Lunar exosphere, and the electrostatic and abrasive lunar regolith. The critical need for lightweight, safe and reliable power cables/wires materials is evident. In this presentation, the extreme high altitude and lunar environments and recent materials development from NASA Glenn Research Center’s High Voltage Materials team towards meeting NASA’s objectives and goals for aeronautics and space missions.

Cu/CNT conductors↗
DOE OSTI2023

Geographically Dependent Sustainability Indicators for Comparison of Conventional Vegetable Production to Controlled-Environment Agriculture

Many food system lifecycle analyses distill agricultural production and supply chain impacts into single-value sustainability metrics for various food categories. These studies provide an overview of the food supply system that highlight striking results such as the GHG impacts of meat production. The supply chain impacts of vegetable production occupy the middle ground; higher than average food loss and waste, lower than average overall energy use, etc. However, aggregated results obscure the sustainability implications of the location of food production, especially for vegetables. Moreover, the increasing instability of food production systems are not captured, as illustrated by a recent Washington Post article. According to a UC Merced study conducted for the state, California farmers left nearly 400,000 acres of agricultural land unplanted last year because of a lack of water. The result, the study found, was a direct economic cost to farmers of $1.1 billion and the loss of nearly 9,000 agricultural jobs. (The Washington Post, March 21, 2022.) Previous work quantified the food-energy-water nexus implications of transitioning vegetable production from large, centralized agricultural operations to smaller distributed production in controlled-environment farms (CEA). The importance of location-specific data is especially evident for water use. Water impacts of the food system are primarily local to the region where food is produced, water impacts vary significantly between locations, and water stress is a major concern in locations that currently host large agricultural operations. Location-specific data is needed to accurately assess the water impacts of transitioning to CEA. The location of farms in relation to consumers impacts transportation energy use, food loss and waste, and requirements for food processing (e.g., to reduce weight, preserve foods for long storage, and package foods to reduce damage and loss) Reducing transport is particularly relevant for agricultural products that could be grown in CEAs (fruits, vegetables, protein). Access to nutritious food is not evenly distributed in the population. Remote communities, communities in harsh environments, and economically-disadvantaged communities often have poor access to healthy foods. CEA is ideally suited to these environments. However, the energy and water use of CEA, while in many respects lower overall than conventional supply chains, are concentrated within communities and could have significant local impacts. This paper reports on development of sustainability metrics that seek to capture the tradeoffs between the current supply chain and a CEA supply chain for vegetables; focusing on the location-dependent implications of water use, the transition from largely fossil fuel based energy use to electricity, and the food access, resilience and wellbeing implications of urban versus rural food production.

controlled-environment agriculture↗
DOE OSTI2020

Machine Learning-Enabled Correlation and Modeling of Multimodal Response of Thin Film to Environment on Macro and Nanoscale Using “Lab-on-a-Crystal”

To close the feedback loop between artificial intellegence-controlled materials synthesis and characterization, material functionality must be rapidly tested. A platform for high-throughput multifunctional materials characterization is developed using a quartz crystal microbalance with auxiliary in-plane electrodes and a custom gas/vapor flow cell, enabling simultaneous scanning probe microscopy and electrical, optical, gravimetric, and viscoelastic characterization on the same film under controlled environment. The lab-on-a-crystal in situ multifunctional output allows direct correlations between the gravimetric/viscoelastic, electrical, and optical responses of polymer film in response to environment. Finally, when multiple film properties are used to augment the training set for machine learning regression, prediction of material response to the environment improves by a factor of 13 when <5% of the total dataset is used for model training.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Probe the Localized Electrochemical Environment Effects and Electrode Reaction Dynamics for Metal Batteries using In Situ 3D Microscopy

Uncontrollable dendrite growth is closely related to non-uniform reaction environments. However, there is a lack of understanding and analysis methods to probe the localized electrochemical environment (LEE). Here the effects of the LEE are investigated, including localized ion concentrations, current density, and electric potential, on metal plating/stripping dynamics and dendrite minimization. A novel in situ 3D microscopy technique is developed to image the morphology dynamics and deposition rate of Zn plating/stripping processes on 3D Zn–Mn anodes. Using the in situ 3D microscope, the electrode morphology changes during the reactions are directly imaged and Zn deposition rate maps at different time points are obtained. It is found that reaction kinetics are highly correlated to LEE and electrode morphology. To further quantify the LEE effects, the digital twin technique is employed that allows the accurate calculation of the electrochemical environments, such as localized ion concentrations, current density, and electric potential, which cannot be directly measured from experiments. We found that the curvature of the 3D electrode surface determines the LEE and significantly influences reaction kinetics. This provides a new strategy to minimize the dendrite formation by designing and optimizing the 3D geometry of the electrode to control the LEE.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Secure Collaborative Environment for Seamless Sharing of Scientific Knowledge

In a secure collaborative environment, tera-bytes of data generated from powerful scientific instruments are used to train secure machine learning (ML) models on exascale computing systems, which are then securely shared with internal or external collaborators as cloud-based services. Devising such a secure platform is necessary for seamless scientific knowledge sharing without compromising individual, or institute-level, intellectual property and privacy details. By enabling new computing opportunities with sensitive data, we envision a secure collaborative environment that will play a significant role in accelerating scientific discovery. Several recent technological advancements have made it possible to realize these capabilities. In this paper, we present our efforts at ORNL toward developing a secure computation platform. We present a use case where scientific data generated from complex instruments, like those at the Spallation Neutron Source (SNS), are used to train a differential privacy enabled deep learning (DL) network on Summit, which is then hosted as a secure multi-party computation (MPC) service on ORNL’s Compute and Data Environment for Science (CADES) cloud computing platform for third-party inference. In this feasibility study, we discuss the challenges involved, elaborate on leveraged technologies, analyze relevant performance results and present the future vision of our work to establish secure collaboration capabilities within and outside of ORNL.

Yoginath, Srikanth↗
DOE OSTI2023

Adrastea: An Efficient FPGA Design Environment for Heterogeneous Scientific Computing and Machine Learning

We present Adrastea, an efficient FPGA design environment for developing scientific machine learning applications. FPGA development is challenging, from deployment, proper toolchain setup, programming methods, interfacing FPGA kernels, and more importantly, the need to explore design space choices to get the best performance and area usage from the FPGA kernel design. Adrastea provides an automated and scalable design flow to parameterize, implement, and optimize complex FPGA kernels and associated interfaces. We show how virtualization of the development environment via virtual machines is leveraged to simplify the setup of the FPGA toolchain while deploying the FPGA boards and while scaling up the automated design space exploration to leverage multiple machines concurrently. Adrastea provides an automated build and test environment of FPGA kernels. By exposing design space hyper-parameters, Adrastea can automatically search the design space in parallel to optimize the FPGA design for a given metric, usually performance or area. Adrastea simplifies the task of interfacing with the FPGA kernels with a simplified interface API. To demonstrate the capabilities of Adrastea, we implement a complex random forest machine learning kernel with 10,000 input features while achieving extremely low computing latency without loss of prediction accuracy, which is required by a scientific edge application at SNS. We also demonstrate Adrastea using an FFT kernel and show that for both applications Adrastea is able to systematically and efficiently evaluate different design options, which reduced the time and effort required to develop the kernel from months of manual work to days of automatic builds.

Young, Aaron↗
DOE OSTI2020

Projected changes to severe thunderstorm environments as a result of twenty-first century warming from RegCM CORDEX-CORE simulations

Hazardous weather related to the occurrence of severe thunderstorms including tornadoes, high-winds, and hail cause significant damage globally to life and property every year. Yet the impact on these storms from a warming climate remains a difficult task due to their transient nature. Here, we investigate the change in large-scale environments in which severe thunderstorms form during twenty-first century warming (RCP2.6 and RCP8.5) in a group of RegCM CORDEX-CORE simulations. Severe potential is measured in terms of Convective Available Potential Energy (CAPE) and vertical wind-shear during the severe seasons in three regions which are known to currently be prone to severe hazards: North America, subtropical South America, and eastern India and Bangladesh. In every region, environments supportive for severe thunderstorms are projected to increase during the warm season months in both the RCP2.6 and RCP8.5 scenarios during the twenty-first century. The number of days supportive for severe thunderstorms increases by several days per season over the vast majority of each region by the end of the century. Analyzing the CAPE and shear trends during the twenty-first century, we find seasonally and regionally specific changes driving the increased severe potential. Twenty-first century surface warming is clearly driving a robust increase in CAPE in all regions, however poleward displacement of vertical shear in the future leads to the displacement of severe environments over North America and South America. The results found here relate that severe impacts in the future cannot be generalized globally, and that regionally specific changes in vertical shear may drive future movement of regions prone to severe weather.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Characterization of boundary precipitation in a heavy ion irradiated tungsten heavy alloy under the simulated fusion environment

In the concerted effort to identify materials capable of surviving the adverse environment of a fusion reactor interior, tungsten heavy alloys have been put forth as leading candidates. Experimental trials and behavioral studies have yielded positive results for their adoption by taking advantage of the alloy’s unique balance of inherently high fracture toughness and low sputter yields; yet due to their relative novelty in the fusion community, there remains a lack of understanding on the response of these materials to the extended high temperature irradiation environment of the reactor interior. Further, to alleviate this issue and provide the necessary data on the behavior of tungsten heavy alloys to the simulated fusion environment, a 90W-7Ni-3Fe alloy has been subjected to elevated temperature sequential Ni + and He + ion irradiations to mimic the expected displacement damage and gas production expected after five years of service as a plasma facing material component. Atomic-scale structural analyses and nanoscale chemical mapping have identified the formation of two distinct precipitation structures, a surface localized η-carbide and an a-W 2 C type tungsten carbide, both of which appear to originate at the bi-phase interface between W and the ductile phase. This irradiation assisted and induced precipitate formation respectively is anticipated to adversely affect these materials by selective embrittlement at bi-phase interfaces leading to a reduction in the material’s overall fracture toughness during prolonged high temperature irradiation. It is asserted that any potential exposure to C during fusion reactor operational service should be minimized as to prevent the formation of these phases.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Overview, Progress and Next Steps for Our Understanding of the Near-Earth Space Radiation and Plasma Environment: Science and Applications

The Near-Earth Space Radiation and Plasma Environment falls within the realm of G3 Cluster (G3 refers to ‘Near-Earth Radiation and Plasma Environment’ of the ‘Coupled Geospace System’) under the COSPAR (Committee On Space Research) /International Space Weather Action Teams (ISWAT) Initiative. The diverse and dynamic particle populations from this region pose challenges from both science and space weather-impact perspectives. The G3 cluster has intimate connections with solar, heliosphere clusters, and the other Geospace ones (G1, G2) through a chain of physical processes. This paper reviews recent scientific advances in understanding this complex space environment, identifies gaps in research and space weather applications, and maps out our recommendations on priorities for the next 5-10 years.

Zheng, Yihua↗
DOE OSTI2024

Mechanical degradation of duplex SiC-fiber reinforced SiC matrix composite tubes under a controlled high-temperature steam environment

This paper describes results from the mechanical evaluation of unirradiated SiC fiber–reinforced SiC matrix composite tubes under a controlled high-temperature steam environment. The experiments were aimed at identifying key material degradation behavior under environments relevant to loss-of-coolant accidents of light water reactors. Mechanical tests of the SiC composite tubes at 1000 °C under steam and inert environments were conducted using a unique test capability. Further, the material tested was a duplex tube with a thick monolithic SiC layer on the outer surface. The tubes were subjected to preloading at ~100 MPa in tension before exposure to high-temperature steam with up to 75% of the preload at a constant displacement. In the presence of matrix cracks, the steam exposure caused embrittlement of the SiC composite tubes and failure at a stress level below the pretest stress. The material degradation was explained by a fiber oxidation model, which can be applied to various SiC cladding concepts. The embrittlement could be a limiting factor for using SiC cladding subjected to loss-of-coolant accident conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Typological representation of the offshore oceanographic environment along the Alaskan North Slope

Erosion and flooding impacts to Arctic coastal environments are intensifying with nearshore oceanographic conditions acting as a key environmental driver. Robust and comprehensive assessment of the nearshore oceanographic conditions require knowledge of the following boundary conditions: incident wave energy, water level, incident wind energy, ocean temperature and salinity, bathymetry, and shoreline orientation. The number of offshore oceanographic boundary conditions can be large, requiring a significant computational investment to reproduce nearshore conditions. This present study develops location-independent typologies to reduce the number of boundary conditions needed to assess nearshore oceanographic environments in both a Historical (2007–2019) and Future (2020–2040) timespan along the Alaskan North Slope. We used WAVEWATCH III® and Delft3D Flexible Mesh model output from six oceanographic sites located along a constant ~50 m bathymetric line spanning the Chukchi to Beaufort Seas. K-means clustering was applied to the energy-weighted joint-probability distribution of significant wave height (H s ) and peak period (T p ). Distributions of wave and wind direction, wind speed, and water level associated with location-independent centroids were assigned single values to describe a reduced order, typological rendition of offshore oceanographic conditions. Reanalysis data (e.g., ASRv2, ERA5, and GOFS) grounded the historical simulations while projected conditions were obtained from downscaled GFDL-CM3 forced under RCP8.5 conditions. Location-dependence for each site is established through the occurrence joint-probability distribution in the form of unique scaling factors representing the fraction of time that the typology would occupy over a representative year. As anticipated, these typologies show increasingly energetic ocean conditions in the future. They also enable computationally efficient simulation of the nearshore oceanographic environment along the North Slope of Alaska for better characterization of coastal processes (e.g., erosion, flooding, or sediment transport).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Multi-criteria thermal resilience certification scheme for indoor built environments during heat waves

With climate change, the indoor built environment is expected to significantly influence the occupant's safety and well-being. A novel multi-criteria thermal resilience certification scheme for indoor built environments during extreme heat events is proposed in this paper. The certification scheme considers overheating, thermal comfort, heat stress, and hygrothermal discomfort in built environments. These criteria are quantified using key performance indicators like indoor overheating degree, hours of exceedance, wet-bulb globe temperature, and heat index, respectively. This scheme is developed based on existing best practices like standards, rating systems, and literature. The scheme is implemented on a benchmark building energy performance model for detached post-World War II dwellings in Belgium as a case study using weather data measured from the City of Brussels. The indoor overheating in the reference dwelling is assessed with a static threshold of 27 °C for the bedrooms and adaptive thresholds for other areas. The analysis found that the building performance is within the defined threshold levels throughout the heat wave duration for all criteria. Therefore, the reference dwelling got a maximum attainable score of four points and is rated five-star for thermal resilience during heat waves. The proposed certification scheme is intended as a standardized framework and highlights the need for further revisions in building performance policies and guidelines.

Climate change↗
DOE OSTI2022

Antimony redox processes in the environment: A critical review of associated oxidants and reductants

The environmental behavior of antimony (Sb) has recently received greater attention due to the increasing global use of Sb in a range of industrial applications. Although present at trace levels in most natural systems, elevated Sb concentrations in aquatic and terrestrial environments may result from anthropogenic activities. The mobility and toxicity of Sb largely depend on its speciation, which is dependent to a large extent on its oxidation state. To a certain extent, our understanding of the environmental behavior of Sb has been informed by studies of the environmental behavior of arsenic (As), as Sb and As have somewhat similar chemical properties. However, recently it has become evident that the speciation of Sb and As, especially in the context of redox reactions, may be fundamentally different. Therefore, it is crucial to study the biogeochemical processes impacting Sb redox transformations to understand the behavior of Sb in natural and engineered environments. Currently, there is a growing body of literature involving the speciation, mobility, toxicity, and remediation of Sb, and several reviews on these general topics are available; however, a comprehensive review focused on Sb environmental redox chemistry is lacking. Herein, we provide a review of research conducted within the past two decades examining the redox chemistry of Sb in aquatic and terrestrial environments and identifies knowledge gaps that need to be addressed to develop a better understanding of Sb biogeochemistry for improved management of Sb in natural and engineered systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Microbial reduction of low-crystallinity tripuhyite (FeSbO 4 ): Implications for Sb(V) cycling in contaminated environments

Tripuhyite (FeSbO 4 ) is an important antimony (Sb)-bearing mineral that controls Sb mobility in contaminated environments, yet its structural stability during microbial reduction remains unresolved. Understanding how FeSbO 4 behaves under anoxic conditions is therefore necessary to predict natural Sb cycling. Here, this study examined how an anaerobic microbial community interacts with FeSbO 4 and alters its structural and redox behavior. Across all conditions, FeSbO 4 released measurable Sb(V), demonstrating that the mineral undergoes partial dissolution in anoxic environment even without microbial activity. However, when extensive microbial Fe(III) reduction occurred in the presence of the electron shuttle anthraquinone-2,6-disulfonate (AQDS), the released Sb was re-immobilized. This indicates that microbial reduction processes modulate Sb mobility. Microbial community analysis showed the enrichment of acetate-utilizing Fe(III)-reducing bacteria as key drivers of Fe reduction. Although secondary Fe minerals were not detected, X-ray absorption fine structure measurements and scanning electron microscopy images revealed the formation of an Sb(III)-bearing phase consistent with valentinite (Sb 2 O 3 ) in the AQDS-amended treatment. This transformation suggests that AQDS not only enhances Fe(III) reduction but is also linked to Sb(V) reduction, and facilitates the immobilization of reduced Sb(III) as Sb 2 O 3 . Overall, this work provides the first evidence that FeSbO 4 is susceptible to microbially mediated redox transformations, and that these processes can significantly alter the mobility and speciation of Sb in reducing environments.

Electron transfer mediator↗
DOE OSTI2022

The role of surface forces in environment-enhanced cracking of brittle solids

Fracture initiation and propagation in brittle materials is promoted in surface-reactive (sorptive) environments, a phenomenon known as subcritical crack growth (SCG). Laboratory measured crack-propagation velocity vs. stress intensity factor relationships typically exhibit highly nonlinear, multi-stage characteristics that are sensitive to environmental factors such as adsorbate concentration and temperature. For practical purposes, empirical relationships (e.g., a power law) have been used to describe this complex phenomenon. However, how the overall SCG behavior emerges from the underlying fundamental processes near the crack tip, such as the interaction of the crack surfaces separated by only a few nanometers and mass transport within the nano-confined space, is still not well understood. This paper develops a mechanistic, surface-force-based fracture theory (SFFT) which integrates surface force models, fluid transport models, and linear elastic fracture mechanics to quantitatively explain the multi-stage characteristics of SCG in brittle solids. A numerical model is developed based on SFFT and solved through an implicit partitioned scheme for efficiency and modularity. The results are validated by Wiederhorn's data on crack propagation in soda-lime glasses at a wide range of relative humidity levels. We show that, for the first time, the entire range of an SCG curve can be captured by a single physics-based model. The predicted SCG curves reveal that the development of repulsive disjoining pressure behind the crack tip can be responsible for the reduced apparent fracture toughness in a sorptive environment. In conclusion, the shape of the SCG curve, and its changes with respect to the environment, is found to critically depend on the assumed transport models.

36 MATERIALS SCIENCE↗