Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Entry Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

21st century space transportation system design approach - HL-20 personnel launch system

This article provides an introduction to and overview of the research that was conducted on the HL-20 lifting body. The concept has been defined as an option for a personnel launch system (PLS) that is intended to carry six to eight Space Station Freedom crew persons. In this role the HL-20 will complement the Space Shuttle operation and ensure the ability to transport people to and from Earth orbit after the year 2000. The research covers a broad range of disciplines, including aerodynamics, aerodynamic heating and thermal protection systems, structural design, subsystem definition, trajectory and guidance system development for entry and abort, production and operations, and human factors. This article also presents the lifting-body heritage, design features of the concept, and HL-20/PLS mission requirements.

Stone, Howard W.↗
NASA NTRS1993

Galileo spacecraft anomaly and safing recovery

A high-level anomaly recovery plan which identifies the steps necessary to recover from a spacecraft 'Safing' incident was developed for the Galileo spacecraft prior to launch. Since launch, a total of four in-flight anomalies have lead to entry into a system fault protection 'Safing' routine which has required the Galileo flight team to refine and execute the recovery plan. These failures have allowed the flight team to develop an efficient recovery process when permanent spacecraft capability degradation is minimal and the cause of the anomaly is quickly diagnosed. With this previous recovery experience and the very focused boundary conditions of a specific potential failure, a Gaspra asteroid recovery plan was designed to be implemented in as quickly as forty hours (desired goal). This paper documents the work performed above, however, the Galileo project remains challenged to develop a generic detailed recovery plan which can be implemented in a relatively short time to configure the spacecraft to a nominal state prior to future high priority mission objectives.

Basilio, Ralph R.↗
NASA NTRS1994

Pressure distributions on a 0.02-scale Space Shuttle orbiter nose at Mach 21.5 in helium

Pressure distributions on a 0.02-scale model of the Space Shuttle orbiter forward fuselage were obtained in the 22-inch aerodynamic leg of the Langley Hypersonic Helium Tunnel Facility at a nominal free-stream Mach number of 21.5 and a ratio of specific heats of 1.67 for inclusion in the database of the Shuttle entry air data system (SEADS). The data were measured at model angles of attack of 0 deg to 50 deg in 5 deg increments for zero sideslip angle and at model sideslip angles of -5 deg to 5 deg for angles of attack equal to 5, 20, 35, and 40 deg. These data displayed trends similar to those observed in other wind tunnels at Mach 6 and 10 in air. Specifically noted is a shift in the location of the stagnation point at angles of attack above 15 deg; this effect did not, however, occur in flight. By comparison, the data obtained at Mach 6 in the Langley Hypersonic CF4 Tunnel, corresponding to a lower ratio of specific heats in the postshock region than those in helium and air, showed some reduction of the stagnation point shift at the higher angles of attack. The differences between flight and wind tunnel pressure distributions are believed due primarily to high-temperature gas chemistry effects in flight, which include lower effective specific heat ratios but which were not completely duplicated in the wind tunnels.

Ashby, George C., Jr.↗
NASA NTRS2005

Aerial Explorers

This paper presents recent results from a mission architecture study of planetary aerial explorers. In this study, several mission scenarios were developed in simulation and evaluated on success in meeting mission goals. This aerial explorer mission architecture study is unique in comparison with previous Mars airplane research activities. The study examines how aerial vehicles can find and gain access to otherwise inaccessible terrain features of interest. The aerial explorer also engages in a high-level of (indirect) surface interaction, despite not typically being able to takeoff and land or to engage in multiple flights/sorties. To achieve this goal, a new mission paradigm is proposed: aerial explorers should be considered as an additional element in the overall Entry, Descent, Landing System (EDLS) process. Further, aerial vehicles should be considered primarily as carrier/utility platforms whose purpose is to deliver air-deployed sensors and robotic devices, or symbiotes, to those high-value terrain features of interest.

Young, Larry A.↗
NASA NTRS2005

Reuse International Space Station (ISS) Modules as Lunar Habitat

NASA currently projects ending the ISS mission in approximately 2016, due primarily to the expense of re-boost and re-supply. Lunar outposts are expected to be in place in the same timeframe. In support of these mission goals, a scheme to reuse ISS modules on the moon has been identified. These modules could function as pressurized volumes for human habitation in a lunar vacuum as they have done in low-earth orbit. The ISS hull is structurally capable of withstanding a lunar landing because there is no atmospheric turbulence or friction. A compelling reason to send ISS modules to the moon is their large mass; a large portion of the ISS would survive re-entry if allowed to de-orbit to Earth. ISS debris could pose a serious risk to people or structures on Earth unless a controlled re-entry is performed. If a propulsive unit is devised to be attached to the ISS and control re-entry, a propulsion system could be used to propel the modules to the moon and land them there. ISS modules on the lunar surface would not require re-boost. Radiation protection can be attained by burying the module in lunar regolith. Power and a heat removal system would be required for the lunar modules which would need little support structure other than the lunar surface. With planetary mass surrounding the module, heat flux may be controlled by conductance. The remaining requirement is the re-supply of life-support expendables. There are raw materials on the moon to supplement these vital resources. The lunar maria is known to contain approximately 40% oxygen by mass in inorganic mineral compounds. Chemical conversion of moon rocks to release gaseous oxygen is known science. Recycling and cleaning of air and water are currently planned to be accomplished with ISS Environmental Control & Life Support Systems (ECLSS). By developing a Propulsion and Landing Module (PLM) to dock to the Common Berthing Mechanism (CBM), several identical PLMs could be produced to rescue and transfer the ISS modules to the lunar surface, one by one. The propulsion does not need to be as swift as Apollo, nor would the modules need to be manned during transportation to the moon. The trajectory from low-Earth to lunar orbit would avoid or quickly pass through the Van Allen belts to minimize radiation exposure to electronics onboard. A landing technology similar to Apollo's could be utilized to land an ISS module on the moon. Since the mission will be unmanned, system redundancy could be minimized to keep the cost down. If the mission failed and a module crashed landed on the moon, the risk of debris landing on Earth would be avoided and the raw materials could be used in future lunar missions.

Miernik, Janie↗
NASA NTRS2010

Calibration Modeling Methodology to Optimize Performance for Low Range Applications

Calibration is a vital process in characterizing the performance of an instrument in an application environment and seeks to obtain acceptable accuracy over the entire design range. Often, project requirements specify a maximum total measurement uncertainty, expressed as a percent of full-scale. However in some applications, we seek to obtain enhanced performance at the low range, therefore expressing the accuracy as a percent of reading should be considered as a modeling strategy. For example, it is common to desire to use a force balance in multiple facilities or regimes, often well below its designed full-scale capacity. This paper presents a general statistical methodology for optimizing calibration mathematical models based on a percent of reading accuracy requirement, which has broad application in all types of transducer applications where low range performance is required. A case study illustrates the proposed methodology for the Mars Entry Atmospheric Data System that employs seven strain-gage based pressure transducers mounted on the heatshield of the Mars Science Laboratory mission.

McCollum, Raymond A.↗
NASA NTRS2014

Mars Science Laboratory (MSL) Entry, Descent, and Landing Instrumentation (MEDLI): Complete Flight Data Set

The Mars Science Laboratory (MSL) entry vehicle (EV) successfully entered the Mars atmosphere and landed the Curiosity rover safely on the surface of the planet in Gale crater on August 6, 2012. MSL carried the MSL Entry, Descent, and Landing (EDL) Instrumentation (MEDLI). MEDLI delivered the first in-depth understanding of the Mars entry environments and the response of the entry vehicle to those environments. MEDLI was comprised of three major subsystems: the Mars Entry Atmospheric Data System (MEADS), the MEDLI Integrated Sensor Plugs (MISP), and the Sensor Support Electronics (SSE). Ultimately, the entire MEDLI sensor suite consisting of both MEADS and MISP provided measurements that were used for trajectory reconstruction and engineering validation of aerodynamic, atmospheric, and thermal protection system (TPS) models in addition to Earth-based systems testing procedures. This report contains in-depth hardware descriptions, performance evaluation, and data information of the three MEDLI subsystems.

Cheatwood, F. McNeil↗
NASA NTRS2016

Dynamic CFD Simulations of the MEADS II Ballistic Range Test Model

Dynamic, viscous, free-to-oscillate simulations of the Mars Entry Atmospheric Data System (MEADS) ballistic range model are performed using two different ow solvers, OVERFLOW and US3D. At the time of publication, data from the ballistic range experiment was not yet available, so the current work serves as a code-to-code exercise. Results from the analysis show good agreement between the predicted static aerodynamic coefficients for each solver. Both codes predict damped pitch oscillations for Mach 3:0 with initial amplitudes of 5⁰ and 30⁰, as well as for Mach 1:5 with initial amplitude of 30⁰. The two solvers predict undamped pitch oscillations for Mach 1:5 with initial amplitude of 5⁰. For most cases, US3D predicts less damping than OVERFLOW. The difference is attributed to higher pressures in the separated region of the wake, and the resultant effect on the backshell contribution to the pitching moment.

Stern, Eric C.↗
NASA NTRS1994

Mars Pathfinder Science Investigations and Objectives

Pathfinder's primary ojective is to demonstrate an inexpensive system for curise, entry, descent, and landing on mars. Additional objective include the deployent and operation of various science instruments: a stereoscopic imager with filters on a pop up mast, and alpha proton x-ray spectometer (APXS), and an atmospheric structure instrument/meteorology package

Mars↗
NASA NTRS2021

Insitu Lunar Launch & Landing Pad Construction w/ Regolith and Thermoset Polymers

This CIF project is an extension of materials developed under a previous NASA Innovative Advanced Concepts (NIAC) project titled “Regolith Derived Heat Shield for Planetary Body Entry and Descent Systems with In-Situ Fabrication” by M. Hogue et al. (2012). Launch and landing pads are necessary to mitigate risks to lander/ascent vehicles, surface assets, and orbital assets from rocket plume ejected regolith. At this time, all launching and landing on the lunar surface will be on unprepared surface sites. Though this has been a successful approach for Apollo and other uncrewed missions, significant risks exist for the Artemis Program due to the increased thrust of the vehicles, presence of co-located assets, and potential surface level requirements for tall vehicles. This project developed a thermoset polymer–regolith composite material for use as a launch and landing pad. Test articles were prepared at 20% and 11% polymer mass percent (wt%) and tested under hot fire conditions that simulated large vehicle lunar launch/landing conditions. A minimum polymer wt% of 9% was achieved and both samples successfully mitigated regolith ejecta from plume effects. A concept for emplacing launch/landing pads was successfully tested in laboratory environments using a screw and barrel approach to mixing, conveying and depositing materials. It is recommended that materials and systems be developed to TRL 6 for a small-scale lunar demonstration of emplacement of a launch/landing pad via a Commercial Lunar Payload Services (CLPS) mission to support the Artemis Program.

Nathan Gelino↗
NASA NTRS2023

Dragonfly Entry and Descent Overview

Dragonfly is a New Frontiers class mission led by Johns Hopkins Applied Physics Laboratory (APL) which will deliver a rotorcraft lander to Saturn’s moon Titan [1] for an extended science mission. The spacecraft will launch in 2027 and arrive at Titan in 2033. This presentation will provide an overview of the Entry and Descent system that is under development to ensure the safe delivery of this unique “relocatable lander” to Titan, with an emphasis on some of the key technical challenges that the team is addressing.

Dragonfly↗
NASA NTRSDate not supplied

Rocket Lab Venus - Enabling Low-Cost Interplanetary Missions

Rocket Lab’s mission to Venus, launching in January 2025, aims to demonstrate that small launch vehicles, such as Electron, and high-energy small spacecraft, such as Photon, can enable a new paradigm of regular, low-cost interplanetary missions. The primary science mission involves a small ~20 kg direct entry probe that will sample the Venusian cloud layers with an autofluorescing nephelomoeter. The entry probe thermal protection system (TPS) is even more critical than usual due to the selected entry trajectory and the lack of suitable heritage TPS materials. NASA’s newly developed 3D Woven Carbon Phenolic, a derivative of the Heatshield for Extreme Entry Environment Technology (HEEET) material, is an enabling technology for this mission, and it will comprise the probe forebody heat shield. The work that led to the selection of 3D Woven Carbon Phenolic, the TPS cost-reduction approaches taken, and the future possibilities of such an approach to probe development are presented.

Lyle Campbell↗
NASA NTRS2015

NASA Engineering and Safety Center Technical Bulletin No. 15-01: Preventing Incorrect Installation of Polarized Capacitors

Even though NASA’s Lessons Learned Information System has an entry on the reverse installation of polarized capacitors, this error keeps reoccurring and is a “lesson not learned.” The purpose of this bulletin is to discuss some of the reasons this keeps happening as well as offer best practices to prevent this error in the future.

Preventing Incorrect Installation of Polarized Cap↗
NASA NTRS2026

List of Commercial and Advanced Developmental Niobium-Based Alloys of the Space Age

This report compiles a list of commercial and developmental niobium-based alloys developed during the Space Age (late 1950s through mid-1970s) for extreme-temperature applications, including rocket engine thrust chambers, hypersonic re-entry thermal protection systems, and space fission reactor loops. Niobium (Nb) was widely pursued because it provided the lowest density (~8.6 g/cc) among the primary refractory metals, a high melting temperature (~2470°C), exceptional low-temperature ductility, good formability, and compatibility with liquid alkali metals. An evaluation of physical metallurgy mechanisms, focusing on solid-solution strengthening via heavy refractory solutes (W, Mo, Ta), dual-purpose reactive solutes (Hf, Zr, Ti), and dispersion strengthening using carbides, nitrides, and oxides is presented. Additionally, the report compares Western and Soviet Union metallurgical approaches, explaining how supply chain factors and manufacturing infrastructure influenced element selection, interstitial chemistry, and alloy identification/naming conventions. Cataloging these historical alloy chemical compositions serves as a foundational reference for modern alloy additive manufacturing, thermodynamic CALPHAD modeling, and machine-learning discovery pipelines for next-generation extreme-environment niobium-based alloys.

Physical Metallurgy↗
NASA NTRSDate not supplied

In Situ Small Spacecraft Missions Utilizing Heatshield for Extreme Entry Environments Technology

There is considerable interest in utilizing Small Spacecraft beyond low Earth orbit. In November of 2018, successful data relay operations of the MarCO CubeSats during the entry, descent, and landing (EDL) of the Mars InSight mission showed the viability of using CubeSats for interplanetary missions. Additional testament to the promise of Small Spacecraft class rideshare missions is the upcoming Artemis-1 flight test that will launch thirteen 6U CubeSats, as well as the establishment of NASA’s SIMPLEx program which will conduct stand-alone planetary science missions that launch with a primary payload. It is anticipated that continued innovations in Small Spacecraft capabilities combined with small EDL systems will expand the range of potential missions to allow for in situ investigations. Recently, NASA invested in the development of a new, efficient and capable ablative thermal protection system (TPS), utilizing 3-D Weaving. The new dual layer TPS, Heatshield for Extreme Entry Environment Technology (HEEET), is tailorable, scalable, robust, mass efficient and capable of supporting in situ missions across the solar system. Combining the HEEET entry system with innovative Small Spacecraft technology will substantially expand the range of Small Spacecraft mission applications by offering the capability for high speed entry or aerocapture at destinations with atmospheres. This paper will describe the HEEET aeroshell system and highlight various mission concepts including a dual technology demonstration mission that is under development and other concepts to deliver instruments for planetary science.

Small Spacecraft↗
NASA NTRS1995

Mars Pathfinder Airbag Impact Attenuation System

The Mars Pathfinder spacecraft, scheduled for launch in December 1996, is designed to validate a low cost Entry, Descent, and Landing system and to perform scientific surface operations. The Jet Propulsion Laboratory and Sandia National Laboratories teamed to design, fabricate, test and validate a prototype 0.38 scale model of an airbag impact attenuation system. A computer code was developed to predict the performance of the airbag system. A test program in Sandia's High Altitude Chamber was performed to validate the code and demonstrate the feasibility of the airbag concept and design. In addition, freefall tests were performed at representative velocities to demonstrate the structural integrity of the airbag system design. The feasibility program demonstrated that the airbag impact attenuation design will protect the lander upon impact with the Martian surface.

Mars Pathfinder↗
NASA NTRS2011

Mars Ascent Vehicle Gross Lift-off Mass Sensitivities for Robotic Mars Sample Return

The Mars ascent vehicle is a critical element of the robotic Mars Sample Return (MSR) mission. The Mars ascent vehicle must be developed to survive a variety of conditions including the trans-Mars journey, descent through the Martian atmosphere and the harsh Martian surface environments while maintaining the ability to deliver its payload to a low Mars orbit. The primary technology challenge of developing the Mars ascent vehicle system is designing for all conditions while ensuring the mass limitations of the entry descent and landing system are not exceeded. The NASA In-Space Propulsion technology project has initiated the development of Mars ascent vehicle technologies with propulsion system performance and launch environments yet to be defined. To support the project s evaluation and development of various technology options the sensitivity of the Mars ascent vehicle gross lift-off mass to engine performance, inert mass, target orbits, and launch conditions has been completed with the results presented herein.

Dux, Ian J.↗
DOE OSTI2013

Mechanism of supporting sub-communicator collectives with O(64) counters as opposed to one counter for each sub-communicator

A system and method for enhancing barrier collective synchronization on a computer system comprises a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program being executed by a processor. The system includes providing a plurality of communicators for storing state information for a bather algorithm. Each communicator designates a master core in a multi-processor environment of the computer system. The system allocates or designates one counter for each of a plurality of threads. The system configures a table with a number of entries equal to the maximum number of threads. The system sets a table entry with an ID associated with a communicator when a process thread initiates a collective. The system determines an allocated or designated counter by searching entries in the table.

97 MATHEMATICS AND COMPUTING↗