Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXCAVATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

The significance of substrate characteristics in determining morphology and morphometry of lunar craters

Variations in the morphologic and morphometric characteristics of lunar craters appear to correlate well with the characteristics of the outer lunar crust and the presence of a 2-3 km thick megaregolith layer. These correlations suggest that substrate layering in general, and megaregolith in particular, may have an important effect on the excavation and modification stages in the formation of lunar craters.

Head, J. W.↗

Missile impact craters (White Sands Missile Range, New Mexico) and applications to lunar research: Contributions to astrogeology

Craters in natural materials at White Sands Missile Range, N. Mex., were produced by the impact of high-velocity to hypervelocity missiles traveling along oblique trajectories with kinetic energies between 2.1 and 81 × 1014 ergs. The oblique impacts produce craters 2 to 10 m across with morphologies and ejecta that are bilaterally symmetrical with respect to the plane of the missile trajectory. Rims are high and the amount of ejecta large in down-trajectory and lateral directions, whereas rims are low to nonexistent and ejecta thin to absent up-trajectory. Symmetry development and modifications of the symmetry are a function of target material, local topography, and angle of impact. Seven mappable units can be recognized in and around the craters. Three of these are ejecta: thick ejecta near the crater, thin to discontinuous ejecta at greater distances, and scattered ejecta at the greatest distances to the limit of throwout. These ejecta units may be absent on the up-trajectory side; if present, they are rarely as thick or continuous as on other sides of the crater. Three units are target materials: undeformed target material exposed in local patches through thin to discontinuous ejecta and everywhere between the fragments of scattered ejecta, tilted and broken target material exposed in upper crater walls, and shattered and fractured target material exposed on the up-trajectory crater wall. The seventh unit is slope material composed of talus and fallback within the crater. Development, character, and exposure of these units varies chiefly with the target material. Ejecta from the craters is chiefly broken but relatively undeformed target material that may range in size from very fine grained debris to large blocks. Where the target is porous, significant amounts of the ejecta are composed of sheared and compressed fragments, some coated with dark layers of mixed projectile pieces, powder, and fused metal mixed with crushed target material. For layered targets, the original stratigraphic sequence is crudely preserved and in inverted order in thick ejecta. Secondary impact craters are produced by the impact of ejected fragments when the surrounding surface materials are sufficiently weak. A wide variety of secondary impact crater relations may result. Secondary craters nearest the primary crater have blocks in them that are larger than or the same size as the crater they produced. Farther from the primary crater, the fragments are generally smaller than the secondary crater and are ejected from it. Excavation of four craters revealed a mixed breccia beneath the crater floor composed of missile pieces, sheared and compressed target material, and crushed debris. Banded, disaggregated target material and nonmixed breccia surrounded the mixed breccia, and these breccias were surrounded by a zone of conjugate fractures. Beneath the ejecta on the lateral and down-trajectory crater flanks, the target materials were tilted upward and broken. Up-trajectory, open fractures and downward displacement occurred in two of the craters. No displacement was observed for the other two. Beneath the down-trajectory rims of craters with distinct layering, overturned synclines were observed. Missile breakup and behavior during cratering are a function of target and missile properties. Missile breakup depends on missile velocity and is most extensive at high velocities, where the missile is fragmented, powdered, and partly fused. Burial of missile or its fragmented, powdered, and fused remains is greatest for porous targets and least for dense cohesive targets. For very porous targets, camouflet structures containing the fragmented missile may form. Least squares fit to the data on craters in dry to moist targets indicate V(a) = 10^(-11.433)E(p)^(1.205) where V(a) is the volume of the apparent crater and E(p) is the kinetic energy of the missile. This equation is consistent with expectations of the equations relating apparent depth and radius to kinetic energy. Extrapolation of displaced masses and kinetic energies for laboratory impacts with sand and rock converge near 10^(15) to 10^(16) ergs, where the extrapolations are near the data on missile impact craters, corrected for impact angle. Displaced masses of craters produced by missile impacts and by chemical explosives with small scaled depths of burial are about the same when the kinetic energies of the missiles (corrected for angle of impact) are equal to the TNT equivalent energy of the explosive. The problem of equivalent scaled depth of burst for an impact crater is complicated and not entirely resolved, however. Both missile impact craters and chemical explosive craters in water-saturated targets are larger than their counterparts in dry to moist materials. Data collected during the study of missile impact craters have helped resolve a number of problems in lunar research: (1) the soillike nature of lunar surface materials was predicted, (2) sizes of craters produced by artificial impacts were correctly predicted, (3) certain features imaged by Surveyor were found to be analogous to features associated with missile impact craters, {4) missile impacts were used in support of the Apollo passive seismic experiment, (5) craters seen in Apollo orbital photographs were found to be similar to some missile impact craters, (6) missile impact craters supplied data on sample collection and crater phenomenology used in training astronauts, and (7) some returned lunar samples are similar to coated, sheared, and compressed fragments ejected from missile impact craters.

H. J. Moore↗

Aerial field guide

There are two overflights planned for the field conference; one for the Cheney-Palouse tract of the eastern channeled scabland, the other covering the coulees and basins of the western region. The approximate flight lines are indicated on the accompanying LANDSAT images. The first flight will follow the eastern margin of this large scabland tract, passing a series of loess remnants, gravel bars and excavated rock basins. The western scablands overflight will provide a review of the structurally controlled complex pattern of large-scale erosion and deposition characteristic of the region between the upper Grand Coulee (Banks Lake) and the Pasco Basin.

Nummedal, D.↗

The Aristarchus-Harbinger region of the moon - Surface geology and history from recent remote-sensing observations

Photographic and remote sensing observations made from earth and Apollo orbiting spacecraft were used to study the Aristarchus Plateau-Montes Harbinger region. The appearance of the area is described, and a delineation of geologic map units and their stratigraphic relationships is presented. Physical and chemical properties of certain of the geologic units are deduced, and the interrelationships between materials of volcanic and impact origin, including the effects of excavation, redistribution, and mixing of previously deposited materials by younger impact craters, are discussed. A detailed geologic history of the region is developed. Attention is directed to the anomalous red dark mantle on the plateau; it is thought that this layer consists of fine-grained block-free material containing a relatively large fraction of orange glass, and that this layer is probably of pyroclastic origin, laid down at some time during the Imbrian period of mare flooding.

Zisk, S. H.↗

Endogenic modification of impact craters on Mercury

The presence of internally modified impact craters on Mercury's surface may be used to evaluate the possibility of Mercurian volcanism. Such craters are similar to the floor-fractured and mare-filled craters observed on the moon. Mariner-10 images show that most such craters occur, as on the moon, near plains-filled basins. Color-ratio images have indicated that some Mercurian craters manifest red plains materials on their floors. These features may be associated with lava analogous to mare basalts in some lunar craters, or with compositionally distinct subsurface material preserved within the impact crater. Several basins manifest photometric contrasts between basin exteriors and basin-filling plains. Dark haloes are observed around some impact craters superimposed on the interior plains. This suggests the excavation of compositionally distinct material. Some possible endogenic features are discerned, despite the poor surface resolution, such as irregular rimless depressions. It is felt that volcanism may have occurred on Mercury, and that in some areas it may be similar to that of the lunar Mare Australe region.

Schultz, P. H.↗

Orientale and Caloris

Based on revised stratigraphy, structural interpretation, explosion-crater data, and a genetic model for Orientale, it is suggested that Orientale and Caloris have much in common. It is noted that: (1) although the basin fill in Caloris is different from that seen in Orientale, the materials between the most prominent scarp and the weakly-developed outer scarp may be degraded equivalents of the massifs and knobs associated with the Montes Rook, (2) the Montes Rook and the main Caloris scarp have similar stratigraphic and structural features, (3) the lineated ejecta derived from shallower horizons are found near and beyond the weakly-developed outer Caloris scarp which is the counterpart of the Orientale scarp, (4) a well developed field of secondary craters is observed beyond 1 basin diameter at Caloris, (5) the observed textural differences between the material around the main Caloris scarp and the lineated material beyond suggest that Mercury is layered and that Caloris crater excavated coherent materials from one or more of these layers at depth, and (6) the difference in spacing between the Caloris rings is not related to internal layering effects.

Mccauley, J. F.↗

Impact cratering and regolith dynamics

The most recent models concerning mechanical aspects of lunar regolith dynamics related to impact cratering use probabilistic approaches to account for the randomness of the meteorite environment in both space and time. Accordingly the absolute regolith thickness is strictly a function of total bombardment intensity and absolute regolith growth rate in nonlinear through geologic time. Regoliths of increasing median thickness will have larger and larger proportions of more and more deep seated materials. An especially active zone of reworking on the lunar surface of about 1 mm depth has been established. With increasing depth, the probability of excavation and regolith turnover decreases very rapidly. Thus small scale stratigraphy - observable in lunar core materials - is perfectly compatible with regolith gardening, though it is also demonstrated that any such stratigraphy does not necessarily present a complete record of the regolith's depositional history. At present, the lifetimes of exposed lunar rocks against comminution by impact processes can be modeled; it appears that catastrophic rupture dominates over single particle abrasion.

Hoerz, F.↗

Manicouagan impact melt, Quebec. II - Chemical interrelations with basement and formational processes

The basement rocks of Manicouagan exhibit a wide compositional range (40-72% SiO2). Least squares mixing calculations indicate that the average composition of the Manicouagan melt sheet can be modeled for 9 major and 11 trace elements by a mixture of 4.5% anorthosite, 55.5% mafic gneiss, and 40.0% tan gneiss with a granitic-granodioritic composition. The underrepresentation of anorthosite relative to its present distribution is considered. The homogeneous composition of the melt (57.75 + or - 1.21% SiO2) relative to that of the postulated target is explained in a model outlining the dynamic conditions existing during the formation of the melt and its accompanying movement into the excavated cavity.

Grieve, R. A. F.↗

Provenance of Apollo 15 deep drill core sediments

Modal analysis and electron probe microanalysis were performed on polished thin sections prepared from Apollo 15 deep drill core soils in an effort to characterize their provenance. The particles were in the 0.25-1.00 mm size range. The particles were classified into mineral fragments, agglutinates, glasses, rock fragments, and breccias. The results show that highland and mare material occur in the core in an approximately 60:40 ratio, with mare component generally increasing from bottom to top in the core. Quartz-normative basalts are nearly twice as abundant as olivine basalts. Nonmare sources include KREEP basalt flow units from some depth in the crust, excavated by cratering events and supplied to the site as 'rays'.

Basu, A.↗

Cratering motions and structural deformation in the rim of the Prairie Flat multiring explosion crater

Cratering motions and structural deformation are described for the rim of the Prairie Flat multiring crater, 85.5 m across and 5.3 m deep, which was formed by the detonation of a 500-ton TNT surface-tangent sphere. The terminal displacement and motion data are derived from marker cans and velocity gages emplaced in drill holes in a three-dimensional matrix radial to the crater. The integration of this data with a detailed geologic cross section, mapped from deep trench excavations through the rim, provides a composite view of the general sequence of motions that formed a transiently uplifted rim, overturned flap, inverted stratigraphy, downfolded rim, and deformed strata in the crater walls. Preliminary comparisons with laboratory experimental cratering and with numerical simulations indicate that explosion craters of the Prairie Flat-type generated by surface and near-surface energy sources tend to follow predictable motion sequences and produce comparable structural deformation. More specifically, central uplift and multiring impact craters with morphologies and structures comparable to Prairie Flat are inferred to have experienced similar deformational histories of the rim, such as uplift, overturning, terracing, and downfolding.

Roddy, D. J.↗

Impact cratering phenomenon for the Ries multiring structure based on constraints of geological, geophysical, and petrological studies and the nature of the impacting body

In the present paper, an attempt is made to delineate, on the basis of field and laboratory data, the phenomenon of formation of the Ries multiring basin - the best preserved very large terrestrial impact structure. The model proposed conforms to constraints imposed by geological, geophysical, and petrological studies and by the nature of the postulated impacting body. It is also based on the impact features of a stony meteorite measuring 3 km in diameter at an impact velocity of 15 km/sec. The schematic reconstruction shows that critical to the production of a shallow crater is shallow impact penetration (shallow depth of burst). This and the nonballistic ejection of excavated material appear to be genetically related, i.e., if extensive nonballistic transport is recognized, then the associated crater must be a shallow structure and vice versa. This also means the shallow configuration of a crater may not have anything to do with postcratering readjustment.

Chao, E. C. T.↗

Nested-crater model of lunar ringed basins

We propose a model for the origin of impact-basin rings whereby the main topographic rim of a basin approximates the limit of excavation and inner rings approximate the rims of craters formed inside the transient crater by some perturbation in the cratering process. The cause of this complexity in transient cavities may be the presence of discontinuities in the target material. The second inward ring may have formed at the seismic discontinuity about 20 km deep in the lunar crust, and the third, innermost ring of a few large basins at the crust-mantle interface about 60 km deep. Slumping increased the original diameters of many rings and split some initially coherent rings into subsidiary or partial rings. Deformation outside the transient crater produced external arcs. This model differs from prevalent hypotheses of ring formation whereby an inner ring approximates the transient crater rim and major faulting of the flank produced the outer ring structures.

Wilhelms, D. E.↗

The tektite problem

Small glassy pebbles, called tektites, are found in widely scattered locations around the world. These tektites appear much like volcanic glass obsidian, but their chemical composition is different from that of any terrestrial lava and they contain far less water and none of obsidian's characteristic microcrystals. No one has ever found the mother lode of a field of tektites. They cannot, therefore, be the product of terrestrial volcanism. Recently acquired knowledge about the moon's surface confirms earlier indications that tektites cannot be bits of lunar soil propelled to the earth by the impact of meteorites on the moon. According to one of two remaining possibilities tektites are bits of terrestrial sedimentary rock excavated by meteorites striking the earth's surface, melted by the heat of impact, and congealed into glass as they travel above the atmosphere to the scattered sites where they are found. The other possibility is that tektites are the remains of gobs of lava fired at the earth by volcanic activity on the moon.

Okeefe, J. A.↗

The formation of lunar breccias - Sintering and crystallization kinetics

The process of clastic breccia formation by viscous sintering in a stress-free environment is analyzed by treating crystallization and sintering as concurrent, competing processes. The kinetic analysis of crystallization is based on the construction of continuous cooling curves corresponding to the degree of crystallinity observed in the matrix of the breccia. These curves are obtained from corresponding time-temperature-transformation curves, which in turn are constructed from measured values of the crystal growth rate together with calculated values of the nucleation frequency. The kinetic analysis of sintering is based on a modification of the Frenkel (1945) treatment of viscous sintering appropriate for conditions of continuous cooling. The analysis is applied to Lunar Composition 70019 to illustrate the approach. It is shown that it is possible from the kinetic analysis to estimate both the rate at which a given breccia cooled and the minimum temperature at which the matrix particles came in contact. The results obtained for Lunar Composition 70019 seem physically reasonable and suggest that this sample cooled on the surface of the moon in its present form rather than buried in an ejecta blanket from which it was later excavated.

Uhlmann, D. R.↗

Intracrystalline cation order in a lunar crustal troctolite

Lunar sample 76535 appears to be one of the most slowly cooled bits of silicate material yet studied. It provides, therefore, a unique opportunity for the study of ordering processes in the minerals present. A better understanding of these processes may permit better characterization of the thermal history of this and similar rocks. The cation ordering in the olivine is consistent with terrestrial olivines favoring the interpretation that ordering in olivines increases with increasing temperature. In low bronzite, the deviations from the common orthopyroxene space group appear to be caused by cation order on the basis of four M sites instead of two. The degree of cation order in each of these minerals is consistent with the rock having been excavated from its depth of formation by tectonic or impact processes without being reheated above 300 C.

Smyth, J. R.↗

Shock-induced deformation features in terrestrial peridot and lunar dunite

Single crystals of terrestrial olivine were experimentally shock-loaded along the 010 line to peak pressures 280, 330, and 440 kbar, and the resulting deformation features were compared to those in olivine from lunar dunite 72415. Recovered fragments were examined to determine the orientation of the planar fractures. With increasing pressure the percentage of pinacoids and prisms decreases, whereas the percentage of bipyramids increases. The complexity of the distribution of bipyramids also increases with increasing pressure. Other shock-induced deformation features, including varying degrees of recrystallization, are found to depend on pressure, as observed by others. Lunar dunite 72415 was examined and found to contain olivine with well-developed shock-deformation features. The relative proportion of pinacoid, prism, and bipyramid planar fractures measured for olivine from 72415 indicates that this rock appears to have undergone shock pressure in the range 330-440 kbar. If this dunite was brought to the surface of the moon as a result of excavation of an Imbrium event-sized impact crater, the shock-pressure range experienced by the sample and the results of cratering calculations suggest that it could have originated no deeper than 50-150 km.

Snee, L. W.↗

Exposure histories of Bench Crater rocks

A description is presented of the results of mass spectrometric analyses of the noble gases krypton and xenon, in eight Apollo 12 basaltic rocks. The significance of the results is evaluated. It is concluded that the Bench Crater rocks are not what they appear to be in their field relationships. They are not fragments ejected from bedrock by the Bench impact. Most, if not all, have had a previous history of regolith residence prior to the Bench impact. In retrospect, sampling of fresh ejecta from lunar craters during the Apollo missions turned out to be surprisingly difficult. Sampling was successful for Cone and North Ray craters where large boulders were available, but fresh South Ray ejecta was surprisingly elusive. The reported investigation shows that fresh ejecta was not obtained from Bench, and moreover, that the concept of 'radial sampling', in which the rocks sampled from a crater rim are supposed to represent the deepest material excavated, fails very badly for Bench.

Burnett, D. S.↗

Correlation of Al/Si X-ray fluorescence data with other remote sensing data from the Taurus-Littrow area

Al/Si intensity ratios from the Apollo 15 X-ray fluorescence experiment have been analyzed in conjunction with such other remote-sensing data as visible albedo measurements, color-difference photographs, and relative spectral reflectivity curves for the purpose of defining geochemical units in the Taurus-Littrow area. A geochemical boundary between the dark-mantle unit and the western edge of the Taurus Mountains is indicated by all the remote-sensing techniques considered. The major component of the ejecta from Catena Littrow, located within the dark-mantle unit, is highland-type material. The areal extent of the ejecta determined from the Al/Si data is at least 30 km along the Apollo 15 ground track. The constraint imposed upon depth to high-alumina material at Catena Littrow is 520 m. If the high-alumina material excavated at Catena Littrow is an extension of the Taurus Mountain 'roots', then the maximum slope of the buried highland surface from Catena Littrow to the Taurus Mountains border is less than 2.0 deg

Andre, C. G.↗