Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC PROPAGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

First-order thermal correction to the quadratic response tensor and rate for second harmonic plasma emission

Three-wave interactions in plasmas are described, in the framework of kinetic theory, by the quadratic response tensor (QRT). The cold-plasma QRT is a common approximation for interactions between three fast waves. Here, the first-order thermal correction (FOTC) to the cold-plasma QRT is derived for interactions between three fast waves in a warm unmagnetized collisionless plasma, whose particles have an arbitrary isotropic distribution function. The FOTC to the cold-plasma QRT is shown to depend on the second moment of the distribution function, the phase speeds of the waves, and the interaction geometry. Previous calculations of the rate for second harmonic plasma emission (via Langmuir-wave coalescence) assume the cold-plasma QRT. The FOTC to the cold-plasma QRT is used here to calculate the FOTC to the second harmonic emission rate, and its importance is assessed in various physical situations. The FOTC significantly increases the rate when the ratio of the Langmuir phase speed to the electron thermal speed is less than about 3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scattering of radiation in collisionless dusty plasmas

Scattering of electromagnetic waves in collisionless dusty plasmas is studied in the framework of a multi-component kinetic model. The investigation focuses on the spectral distribution of the scattered radiation. Pronounced dust signatures are identified in the coherent spectrum due to scattering from the shielding cloud around the dust grains, dust acoustic waves, and dust-ion acoustic waves. The magnitude and shape of the scattered signal near these spectral regions are determined with the aid of analytical expressions and its dependence on the dust parameters is investigated. The use of radiation scattering as a potential diagnostic tool for dust detection is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Functional composites of plasmas and metamaterials: Flexible waveguides, and variable attenuators with controllable phase shift

Numerical predictions and experimental results in this study verify that plasmas with negative permittivity work as functional media for electromagnetic waves and that their composites with metallic metamaterials show further extraordinary properties. Chain structures of individual plasmas with negative permittivity, forming a straight line and a L-shaped bent line, serve flexible waveguides via coupling structures of localized surface waves standing around each plasma. Further progresses as wave controllers are achievable in an array of the composites of plasmas and micro metallic resonators; functions of phase shifters and attenuators are individually controlled, with rotation of working points on the complex refractive index plane by varying gas conditions and permeability modulation. Such proposed sets of flexible combination will lead to advanced scientific products with novel functions.

36 MATERIALS SCIENCE↗

Design of single-mode waveguides for enhanced light-sound interaction in honeycomb-lattice silicon slabs

We present the design of two waveguides (ladder and slot-ladder waveguides) implemented in a silicon honeycomb photonic-phononic crystal slab, which can support slow electromagnetic and elastic guided modes simultaneously. Interestingly, the photonic bandgap extends along the first Brillouin zone; so with an appropriate design, we can suppress propagation losses that arise coupling to radiative modes. From the phononic point of view, we explain the slow elastic wave effect by considering the waveguide as a chain of coupled acoustic resonators (coupled resonant acoustic waveguide), which provides the mechanism for slow elastic wave propagation. The ladder waveguide moreover supports guided phononic modes outside the phononic bandgap, similar to photonic slab modes, resulting in highly confined phononic modes propagating with low losses. Such waveguides could find important applications to the observation of optomechanical and electrostriction effects, as well as to enhanced stimulated Brillouin scattering and other opto-acoustical effects in nanoscale silicon structures. We also suggest that they can be the basis for a “perfect” photonic-phononic cavity in which damping by coupling to the surroundings is completely forbidden.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of trapped electrons on ion reflection in an oblique shock wave

A magnetosonic shock wave propagating obliquely to an external magnetic field can trap electrons and accelerate them to ultrarelativistic energies. The trapped electrons excite two-dimensional (2D) electromagnetic fluctuations with finite wavenumbers along the shock front. We study effects of the trapped electrons on ion motions through the 2D fluctuations. It is analytically shown that the fraction of ions reflected from the shock front is enhanced by the 2D fluctuations. This is confirmed by 2D (two space coordinates and three velocities) relativistic, electromagnetic particle simulations with full ion and electron dynamics and calculation of test ions in the electromagnetic fields averaged along the shock front. A comparison between 2D and one-dimensional electromagnetic particle simulations is also shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PARAMETRIC INSTABILITY OF WHISTLER WAVES IN THE ELECTRON MAGNETOHYDRODYNAMICS

Using an electron magnetohydrodynamic model, we investigate the parametric decay among three whistler waves. A nonlinear equation to describe both linear and nonlinear properties of whistler waves is derived. Then we discuss the growth rate of the parametric decay of whistler waves in the long-wavelength region and show that the growth rate for two reverse decay waves is larger than that for two decay waves in the same direction. The nonlinear interaction among the long-wavelength and short-wavelength waves is also studied in this paper. This wave-wave interaction implies that long-wavelength waves can be decayed to short-wavelength waves and then dissipate their energy in the short-wavelength region. The possibility of applying our results to account for the generation of sunward propagating whistler waves is also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical wavelength converters for photonic band gap microcircuits

We demonstrate compact optical wavelength conversion architecture for picosecond laser pulses and data streams within photonic band gap waveguides. These multimode waveguides are seeded with resonantly driven, inhomogeneously broadened, distributions of quantum dots whose optical transition center frequency is placed near a sharp discontinuity in the local (electromagnetic) density of states (LDOS). This discontinuity is provided by a cutoff in one of the waveguide modes. Wavelength conversion of an optical pulse propagating in the single-mode spectral range of the waveguide, near the LDOS jump, is provided by a steady-state holding field with frequency matched to the center frequency of the quantum dot distribution. In the absence of an incident laser pulse, the holding field is absorbed by the quantum dots. When the incident pulse intensity is sufficient to cause population inversion of a suitable fraction of the quantum dots, the holding field is amplified and the incident pulse profile is imprinted on to the holding field, leading to wavelength conversion in the range of 3-20 nm at wavelengths near 1.5 {mu}m. Larger wavelength shifts typically require higher power levels for operation (milliwatt scale) but enable conversion of shorter (picosecond) pulses. Small wavelength shifts typically require narrower distribution of quantum dot resonance frequencies. Using finite-difference time-domain simulations, we show that an optical pulse (Gaussian in time) can create another equivalent optical pulse with either higher or lower center frequency inside the photonic band gap of the structure. Optical pulses of a given center frequency can also be selectively amplified or absorbed depending on the coincident arrival of another laser pulse with different center frequency, enabling all-optical logic operations within a multiwavelength-channel optical circuit.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal Casimir effect for Drude metals in the plane-sphere geometry

We compute the Casimir interaction between a plane and a sphere, the configuration employed in the most precise experiments. The scattering formula is developed by taking a suitably chosen plane-wave and multipole basis and is valid for arbitrary values of the sphere radius, interplate distance, temperature, and arbitrary dielectric functions for both sphere and plate. Our analytical and numerical results for metallic surfaces show a nontrivial interplay between the effects of curvature, temperature, finite conductivity, and dissipation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of coherent waves by frequency up-conversion and down-conversion of incoherent light

It is revealed that the generation of a coherent wave by frequency conversion of incoherent waves is a characteristic feature of three-wave interaction in a nonlinear medium when angular dispersion of input waves is properly chosen. In this case the combining action of the pairs of spectral components of incoherent waves may result in the cumulative driving of a single plane monochromatic wave in up-conversion and down-conversion processes. As a fundamental result we point out an enhancement of the spectral radiance of the generated wave in comparison with incoherent waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of sensors based on surface waves in flat-layered structures

A method for increasing the sensitivity of surface-wave sensors in multifilm structures is proposed based on the results of a theoretical study of the reflection of a plane electromagnetic wave from a flat-layered structure containing homogeneous films. A method for optimizing the parameters of the films forming the surface structure is developed and tested. The devices proposed are characterized by high field amplification in a surface layer of multifilm structure and a higher sensitivity to variations in the optical properties of the thin near-surface layer. Application of the proposed multifilm structures is expected to increase significantly the sensitivity of the existing sensors based on surface-plasmon polaritons, which are applied in modern optical multichannel biological, chemical, and physical sensor systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pulse Shaping and Matched Filters for EMAT Communication System

Electromagnetic acoustic transducer (EMAT) is used as a noncontact sensor for acoustic communication in a stainless-steel plate channel. The acoustic wave multipath propagations within the channel cause intersymbol interference (ISI). ISI highly degrades the signal-to-noise ratio (SNR). The poor SNR will result in a low bitrate and a high bit error rate (BER). In this study, a test platform is designed to estimate the performance of the EMAT communication system. Two periodic-permanent-magnet (PPM) EMATs are designed to be used as a transmitter and a receiver. EMAT generates shear-horizontal (SH) wave propagating through the stainless-steel plate channel. We present methods to minimize the ISI effect and recover the message embedded in the received signals hampered by interference, reverberation and multipath effects. The root raised cosine (RRC) filters are introduced as a pulse-shaping filter for transmission and a matched filter for receiving messages. Amplitude Shift Keying (ASK) method is used for modulating the transmitted binary message. The pulse shaping and matched filters reduced the ISI caused by the undesirable multipath effect significantly to the extent that a 5-kbps bitrate can be achieved without any error (zero BER).

Huang, Xin↗

Device for enhancing the time contrast of utrashort laser pulses based on a polarisation Mach-Zehnder interferometer

A polarisation Mach-Zehnder interferometer is considered containing identical cells with a nonlinear medium in different arms. A parallel wave beam propagates through one cell and a converging-diverging wave beam propagates through the other. It is shown that the interferometer transmission depends on the power of the laser pulse propagated through it. It is proposed to use this effect to enhance the time contrast of ultrashort and superhigh-power laser pulses, i.e. to suppress side (background) pulses. (control of laser radiation parameters)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mode conversion of nonaxisymmetric modes in strongly nonuniform helicon-sustained plasma

The oblique wave propagation in helicon-sustained plasma accounting for the effect of the radial electron density gradient is investigated. It is shown that the conditions for the conversion of electrostatic and electromagnetic modes may change drastically in strongly nonuniform helicon plasma due to modification of the wave dispersion branches. Furthermore, the densities at which mode conversion occurs can be considerably lower if the density gradient is steep enough. This result contrasts with the common mode conversion theory neglecting density gradient effects and predicting mode conversion in the central plasma region at very high electron densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A contactless approach for respiratory gating in PET using continuous-wave radar

Purpose: Respiratory gating is commonly used to reduce motion artifacts in positron emission tomography (PET). Clinically established methods for respiratory gating in PET require contact to the patient or a direct optical line between the sensor and the patient’s torso and time consuming preparation. In this work, a contactless method for capturing a respiratory signal during PET is presented based on continuous-wave radar. Methods: The proposed method relies on the principle of emitting an electromagnetic wave and detecting the phase shift of the reflected wave, modulated due to the respiratory movement of the patient’s torso. A 24 GHz carrier frequency was chosen allowing wave propagation through plastic and clothing with high reflections at the skin surface. A detector module and signal processing algorithms were developed to extract a quantitative respiratory signal. The sensor was validated using a high precision linear table. During volunteer measurements and [{sup 18}F] FDG PET scans, the radar sensor was positioned inside the scanner bore of a PET/computed tomography scanner. As reference, pressure belt (one volunteer), depth camera-based (two volunteers, two patients), and PET data-driven (six patients) signals were acquired simultaneously and the signal correlation was quantified. Results: The developed system demonstrated a high measurement accuracy for movement detection within the submillimeter range. With the proposed method, small displacements of 25 μm could be detected, not considerably influenced by clothing or blankets. From the patient studies, the extracted respiratory radar signals revealed high correlation (Pearson correlation coefficient) to those derived from the external pressure belt and depth camera signals (r = 0.69–0.99) and moderate correlation to those of the internal data-driven signals (r = 0.53–0.70). In some cases, a cardiac signal could be visualized, due to the representation of the mechanical heart motion on the skin. Conclusions: Accurate respiratory signals were obtained successfully by the proposed method with high spatial and temporal resolution. By working without contact and passing through clothing and blankets, this approach minimizes preparation time and increases the convenience of the patient during the scan.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-frequency electromagnetic surface waves in a semi-bounded weakly ionized plasma

High-frequency electromagnetic surface waves (SWs) in a weakly ionized plasma half-space with Maxwellian electrons are studied taking into account elastic electron-neutral collisions. The SWs spectrum and damping rate are obtained numerically for a wide range of wavelengths, and the asymptotes of damping rate are analytically calculated in some limits. It is shown that the high-frequency SWs become strongly damped at wavelengths {lambda}<{lambda}{sub Min}, where {lambda}{sub Min} significantly depends on plasma parameters (e.g., electron temperature and electron and neutral atom density). The relative importance of collisional and Cherenkov (collisionless) damping of SWs is investigated and is graphically shown for a range of plasma parameters and SW wavelengths. The behavior of weakly ionized plasma with respect to the SW propagation has been recovered for the collisional parameter {eta}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wave propagation downstream of a high power helicon in a dipolelike magnetic field

The wave propagating downstream of a high power helicon source in a diverging magnetic field was investigated experimentally. The magnetic field of the wave has been measured both axially and radially. The three-dimensional structure of the propagating wave is observed and its wavelength and phase velocity are determined. The measurements are compared to predictions from helicon theory and that of a freely propagating whistler wave. The implications of this work on the helicon as a thruster are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radio-frequency electromagnetic field measurements for direct detection of electron Bernstein waves in a torus plasma

To identify the mode-converted electron Bernstein wave (EBW) in a torus plasma directly, we have developed an interferometry system, in which a diagnostic microwave injected outside of the plasma column was directly detected with the probing antenna inserted into the plasma. In this work, plasma production and heating are achieved with 2.45 GHz, 2.5 kW electron cyclotron heating (ECH), whereas diagnostics are carried out with a lower power (10 W) separate frequency (1-2.1 GHz) microwave. Three components, i.e., two electromagnetic (toroidal and poloidal directions) and an electrostatic (if refractive index is sufficiently higher than unity, it corresponds to radial component), of ECRF electric field are simultaneously measured with three probing antennas, which are inserted into plasma. Selectivities of each component signal were checked experimentally. Excitation antennas have quite high selectivity of direction of linear polarization. As probing antennas for detecting electromagnetic components, we employed a monopole antenna with a length of 35 mm, and the separation of the poloidal (O-wave) and toroidal (X-wave) components of ECRF electric field could be available with this antenna. To detect EBW, which is an electrostatic wave, a small tip (1 mm) antenna was used. As the preliminary results, we detected signals that have three characteristics of EBW, i.e., short wavelength, backward propagation, and electrostatic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-Hermitian wave packet approximation of Bloch optical equations

We introduce a non-Hermitian approximation of Bloch optical equations. This approximation provides a complete description of the excitation, relaxation, and decoherence dynamics of ensembles of coupled quantum systems in weak laser fields, taking into account collective effects and dephasing. In the proposed method, one propagates the wave function of the system instead of a complete density matrix. Relaxation and dephasing are taken into account via automatically adjusted time-dependent gain and decay rates. As an application, we compute the numerical wave packet solution of a time-dependent non-Hermitian Schroedinger equation describing the interaction of electromagnetic radiation with a quantum nano-structure, and compare the calculated transmission, reflection, and absorption spectra with those obtained from the numerical solution of the Liouville-von Neumann equation. It is shown that the proposed wave packet scheme is significantly faster than the propagation of the full density matrix while maintaining small error. We provide the key ingredients for easy-to-use implementation of the proposed scheme and identify the limits and error scaling of this approximation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗