SEARCH · Engineering Papers

Results for “Disks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Observation of preplanetary disks around MWC 349 and LKH-alpha 101

Infrared spectra of three highly reddened emission-line objects (MWC 349, MWC 297, and LKH-alpha 101) have been obtained from both aircraft and ground-based observatories. These spectra show bright emission lines which are consistent with recombination in an H II region. Additional optical data for MWC 349 yield a model which consists of a central O6.5 star with circumstellar disk seen face-on, a surrounding H II region, and circumstellar dust. The parameters of the disk are discussed in terms of the viscous dissipation model of Lynden-Bell and Pringle (1974). The observations are in excellent agreement with the predictions of the model and represent the first substantial case for a newly formed star with a preplanetary disk.

Thompson, R. I.↗

NASA NTRS1977

Interpretation of Beta Lyrae. III - A study of the disk around the secondary component

Light curves of Beta Lyrae available in the far-ultraviolet, visual, and infrared regions of the spectrum at numerous phases in eclipse are analyzed in order to investigate the physical and radiative nature of the disk surrounding the secondary component. The results of this analysis together with those of other investigators lead to the proposal that the outer regions of the disk are dominated by free electrons. This electron-scattering envelope is most likely the source of infrared radiation as well as the cause of the observed polarization. However, the radiation in the region from the optical to the far-ultraviolet comes mainly from submerged layers where local thermodynamic equilibrium prevails. These layers represent the photosphere of either the disk or the secondary component itself.

Brown, D. A.↗

NASA NTRS1978

Thickening of axisymmetric accretion disks and flows

A study is made to determine whether or not hot plasma flowing from the inner edge of an accretion disk around a black hole can thicken out of the disk plane with the onset of a Pringle-Rees thermal instability. The instability is caused by the density thinning caused by the sharp increase in radial infall velocity near the radius of the marginally stable circular orbit, or by abrupt variations in viscosity or Lightman-Eardly secular instabilities. An estimate of the thickening timescale is given. Various physically realistic situations involving radial steady-state flow and where significant disk thickening can occur in the region of the radius of the marginally stable circular orbit are identified. It is noted that its evolution into a large spherical cloud would require large velocities of the viscosity parameter and the amount of energy dissipated in the unstable region.

Stoeger, W. R.↗

NASA NTRS1978

Thermal continuum from acretion disks in quasars

It is argued that supermassive accretion in disks may explain the flat optical continuum observed from some QSOs and Seyfert galaxies. With the aid of energy considerations it is shown that a luminous QSO may be powered by accretion onto a black hole with a mass corresponding to that of 100 million solar masses. It is proposed that the blue continuum component of 3C 273 is thermal continuum emission from the inner part of an accretion disk that powers 3C 273. The present model suggests that many QSOs and Seyfert galaxies may show a power law continuum plus thermal emission from the disk at optical or UV frequencies. Many such objects show indeed a flattening or upturn of their continua in the blue. The QSO PHL 957 shows a flat continuum and indications of a cutoff at the highest observed frequencies.

Shields, G. A.↗

NASA NTRS1978

Twisted and warped disks as consequences of heavy halos

Observationally testable consequences of the hypothesis that galactic disks are confined less by their self-gravity than that of some hot stellar component are sought. Theoretical and observational studies are reviewed which suggest that elliptical galaxies are typically triaxial in form. It is argued that any hot stellar component is likely to be similarly spherical. The motion of a galactic disk about such a population is calculated. Within the plane the flow is to first order along similar concentric ellipses and without of the plane, provided that certain conditions on the background field are met, an oscillation may be excited which can cause isolated galaxies to become warped. The circular motion of matter in such disks will manifest itself in the misalignment of the apparent minor axis and the H I zero-velocity contour. Such an effect may be present in a number of recent H I surveys, although the data presently available do not allow definite conclusions. Alternative explanations of galactic warps are reviewed and their relation to the present proposal discussed.

Binney, J.↗

NASA NTRS1979

Manufacture of low carbon astroloy turbine disk shapes by hot isostatic pressing. Volume 2, project 1

The performance of a hot isotatic pressed disk installed in an experimental engine and exposed to realistic operating conditions in a 150-hour engine test and a 1000 cycle endurance test is documented. Post test analysis, based on visual, fluorescent penetrant and dimensional inspection, revealed no defects in the disk and indicated that the disk performed satisfactorily.

Eng, R. D.↗

NASA NTRS1979

Lightman-Eardley instabilities and accretion disk thickening

After reviewing the role of Compton scattering in accretion disks around black holes, it is discussed whether Lightman-Eardley (LE) secular instabilities can trigger and maintain Pringle-Rees (PR) thermal instabilities. The radiative-transfer-equation and equation-of-state criteria for LE stability in alpha-viscosity-law disk models and dynamic viscosity criteria for more general situations is derived. On the basis of these considerations the LE instability is insufficient for inducing PR instabilities and hot thick inner regions important in accretion-disk models of compact hard X-ray sources. The density thinning due to radial velocity gradients in the accretion flow is suggested as a more likely and satisfactory mechanism.

Stoeger, W. R.↗

NASA NTRS1980

Transonic disk accretion onto black holes

The solution for the radial drift velocity of thin disk accretion onto black holes must be transonic, and is analogous to the critical solution in spherical Bondi accretion, except for the presence of angular momentum. The transonic requirement yields a correct treatment of the inner region of the disk not found in the conventional Keplerian models and may lead to significantly different overall disk structures. Possible observational consequences, relevant to the black hole hypothesis for Cyg X-1 and other candidates, are discussed.

Liang, E. P. T.↗

NASA NTRS1980

Disk-satellite interactions

The rate at which angular momentum and energy are transferred between a disk and a satellite which orbit a central mass is calculated. It is shown that the angular momentum and energy transfer at Lindblad resonances tends to increase the satellite's orbit to lowest order in eccentricity, whereas the transfer at corotation resonances tends to decrease it. The results are applied to the interaction between Jupiter and the protoplanetary disk. The angular momentum transfer is shown to be so rapid that substantial changes in both the structure of the disk and the orbit of Jupiter must have taken place on a time scale of a few thousand years.

Goldreich, P.↗

NASA NTRS1981

Development of materials and process technology for dual alloy disks

Techniques for the preparation of dual alloy disks were developed and evaluated. Four material combinations were evaluated in the form of HIP consolidated and heat treated cylindrical and plate shapes in terms of elevated temperature tensile, stress rupture and low cycle fatigue properties. The process evaluation indicated that the pe-HIP AF-115 rim/loose powder Rene 95 hub combination offered the best overall range of mechanical properties for dual disk applications. The feasibility of this dual alloy concept for the production of more complex components was demonstrated by the scale up fabrication of a prototype CFM-56 disk made from this AF-115/Rene 95 combination. The hub alloy ultimate tensile strength was approximately 92 percent of the program goal of 1520 MPa (220 ksi) at 480 C (900 F) and the rim alloy stress rupture goal of 300 hours at 675 C (1250 F)/925 MPa (134 ksi) was exceeded by 200 hours. The low cycle fatigue properties were equivalent to those exhibited by HIP and heat treated alloys. There was an absence of rupture notch sensitivity in both alloys. The joint tensile properties were approximately 85 percent of the weaker of the two materials (Rene 95) and the stress rupture properties were equivalent to those of the weaker of the two materials (Rene 95).

Marder, J. M.↗

NASA NTRS1982

Hot isostatically pressed manufacture of high strength MERL 76 disk and seal shapes

The feasibility of using MERL 76, an advanced high strength direct hot isostatic pressed powder metallurgy superalloy, as a full scale component in a high technology, long life, commercial turbine engine were demonstrated. The component was a JT9D first stage turbine disk. The JT9D disk rim temperature capability was increased by at least 22 C and the weight of JT9D high pressure turbine rotating components was reduced by at least 35 pounds by replacement of forged Superwaspaloy components with hot isostatic pressed (HIP) MERL 76 components. The process control plan and acceptance criteria for manufacture of MERL 76 HIP consolidated components were generated. Disk components were manufactured for spin/burst rig test, experimental engine tests, and design data generation, which established lower design properties including tensile, stress-rupture, 0.2% creep and notched (Kt = 2.5) low cycle fatigue properties, Sonntag, fatigue crack propagation, and low cycle fatigue crack threshold data. Direct HIP MERL 76, when compared to conventionally forged Superwaspaloy, is demonstrated to be superior in mechanical properties, increased rim temperature capability, reduced component weight, and reduced material cost by at least 30% based on 1980 costs.

Eng, R. D.↗

NASA NTRS1982

Meridional circulation in optically thick accretion disks

Thermal imbalances in stars due to rotation are known to drive mass motions in the meridional plane. A preliminary analytic investigation has been made of a similar effect in optically thick accretion disks using conventional thin-disk approximations. It is found that estimated circulation times can be as short as thermal timescales, resulting in rapid transport of heat and angular momentum. This indicates that the simple approximations commonly used are incomplete with regard to detailed, two-dimensional disk structure.

Cabot, W.↗

NASA NTRS1982

Initial stages of cavitation damage and erosion on copper and brass tested in a rotating disk device

In view of the differences in flow and experimental conditions, there has been a continuing debate as to whether or not the ultrasonic method of producing cavitation damage is similar to the damage occurring in cavitating flow systems, namely, venturi and rotating disk devices. In this paper, the progress of cavitation damage during incubation periods on polycrystalline copper and brass tested in a rotating disk device is presented. The results indicate several similarities and differences in the damage mechanism encountered in a rotating disk device (which simulates field rotary devices) and a magnetostriction apparatus. The macroscopic erosion appears similar to that in the vibratory device except for nonuniform erosion and apparent plastic flow during the initial damage phase.

Rao, P. V.↗

NASA NTRS1983

Structural dynamics studies of rotating bladed-disk assemblies coupled with flexible shaft motions

In order to analyze the dynamic behavior of the first stage compressor/fan of the 'E3' turbofan engine, a classical structural dynamics approach is employed to couple the motions of a flexible bladed disk to a rotating flexible shaft. The analysis accounts for flexible disk displacements which are transverse to the plane of rotation, and radial as well as tangential, and also accounts for rigid disk translations along, and rotations about, axes normal to the undeformed shaft axes. In the case of a wide range of E3 engine shaft flexibilities and speeds, some of the one-diametral node frequencies are shown to be affected by shaft degrees of freedom whose stiffness values are in general range of design practice. Coriolis forces are also found to significantly affect natural frequencies where strong coupling between certain modes is present.

Loewy, R. G.↗

NASA NTRS1983

HL Tauri and its circumstellar disk

New far infrared observations of HL Tau which support the identification of an edge-on disk surrounding the star are presented. A bolometric luminosity for the star of 7.2 solar luminosities and a ratio of infrared to optical luminosity of 630 are indicated. A circumstellar A(V) of about 7.0 mag is produced, consistent with the silicate optical depth to the star. Data on HL Tau's effective temperature and radius and its position on the HR diagram suggest that the star has recently completed its accretion phase and is only 100,000 yr old. The column masses of ice and silicates are combined with the disk dimensions to build a simple model of the disk for comparison with the primitive solar nebula. Estimates of the far-infrared emitting mass provide independent probes of the mass in larger grains around HL Tau.

Cohen, M.↗

NASA NTRS1983

Accretion disks, precessing jets and the asymmetric emission lines of QSOs

The broad line profiles of active galaxies are consistent with emission from the surface of an accretion disk ionized by an ultraviolet continuum emitted from a linear or point source of continuum above the disk. If the point source is offset from the axis of the disk, then the line peak is shifted from zero velocity in a way that resembles observed cases. This misalignment could result from the Lense-Thirring precession of a rotating black hole.

Shields, G. A.↗

NASA NTRS1983

On the clock mechanism and the implausibility of the 35 day precessing disk in HZ Herculis/Hercules X-1

The concept of the precessing accretion disk in HZ Her/Her X-1 in its varied forms, to account for the 35 day periodicity in the X-ray flux, has met many objections from a number of workers on various grounds, but it is still being invoked in current publications. These objections are reviewed and additional arguments are presented against the precessing accretion disk model. The implausibility of the disk models is demonstrated. An alternate clock mechanism, based on nonlinear oscillations in the normal star, which provides the modulation of the mass flow is discussed.

Kondo, Y.↗

NASA NTRS1984

The nonaxisymmetric baroclinic instability in thin accretion disks

The instability of linear, nonaxisymmetric baroclinic waves in the radiative regions of a thin accretion disk is investigated with simplifying assumptions used in the representation of the structure of the basic state. As in stars with rotation laws deviating from rotation on cylinders, the departure from barotropy ('baroclinicity') resulting from such rotation feeds potential energy from the basic state into the kinetic energy of the baroclinic motions. The baroclinic instability is considered as a possible mechanism for driving turbulence in disks. Estimations of the Reynolds stress from baroclinic waves indicate that the degree of baroclinicity in stationary disk models is insufficient to account for the large viscosity inferred from observations of, e.g., cataclysmic variables.

Cabot, W.↗